Граф коммитов

25 Коммитов

Автор SHA1 Сообщение Дата
Junio C Hamano ad416ed433 Merge branch 'maint' to sync with 1.5.4.4
* maint:
  GIT 1.5.4.4
  ident.c: reword error message when the user name cannot be determined
  Fix dcommit, rebase when rewriteRoot is in use
  Really make the LF after reset in fast-import optional
2008-03-08 20:07:57 -08:00
Adeodato Simó 655e8515f2 Really make the LF after reset in fast-import optional
cmd_from() ends with a call to read_next_command(), which is needed
when using cmd_from() from commands where from is not the last element.

With reset, however, "from" is the last command, after which the flow
returns to the main loop, which calls read_next_command() again.

Because of this, always set unread_command_buf in cmd_reset_branch(),
even if cmd_from() was successful.

Add a test case for this in t9300-fast-import.sh.

Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-08 10:46:10 -08:00
Junio C Hamano 41ac414ea2 Sane use of test_expect_failure
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision.  Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:

    test_expect_{success,failure} 'test title' '
	setup1 &&
        setup2 &&
        setup3 &&
        what is to be tested
    '

And expecting a failure exit from the whole sequence misses the
point of writing tests.  Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test.  The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.

This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:

    test_expect_success 'test title' '
	setup1 &&
        setup2 &&
        setup3 &&
        ! this command should fail
    '

test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass.  So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:

    test_expect_failure 'git-foo should create bar' '
        rm -f bar &&
        git foo &&
        test -f bar
    '

This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 20:49:34 -08:00
Shawn O. Pearce ac053c0202 Allow frontends to bidirectionally communicate with fast-import
The existing checkpoint command is very useful to force fast-import
to dump the branches out to disk so that standard Git tools can
access them and the objects they refer to.  However there was not a
way to know when fast-import had finished executing the checkpoint
and it was safe to read those refs.

The progress command can be used to make fast-import output any
message of the frontend's choosing to standard out.  The frontend
can scan for these messages using select() or poll() to monitor a
pipe connected to the standard output of fast-import.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-08-19 03:38:36 -04:00
Shawn O. Pearce 1fdb649c6a Make trailing LF optional for all fast-import commands
For the same reasons as the prior change we want to allow frontends
to omit the trailing LF that usually delimits commands.  In some
cases these just make the input stream more verbose looking than
it needs to be, and its just simpler for the frontend developer to
get started if our parser is slightly more lenient about where an
LF is required and where it isn't.

To make this optional LF feature work we now have to buffer up to one
line of input in command_buf.  This buffering can happen if we look
at the current input command but don't recognize it at this point
in the code.  In such a case we need to "unget" the entire line,
but we cannot depend upon the stdio library to let us do ungetc()
for that many characters at once.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-08-19 03:38:35 -04:00
Shawn O. Pearce 2c570cde98 Make trailing LF following fast-import `data` commands optional
A few fast-import frontend developers have found it odd that we
require the LF following a `data` command, especially in the exact
byte count format.  Technically we don't need this LF to parse
the stream properly, but having it here does make the stream more
readable to humans.  We can easily make the LF optional by peeking
at the next byte available from the stream and pushing it back into
the buffer if its not LF.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-08-19 03:38:35 -04:00
Shawn O. Pearce 401d53fa35 Teach fast-import to ignore lines starting with '#'
Several frontend developers have asked that some form of stream
comments be permitted within a fast-import data stream.  This way
they can include information from their own frontend program about
where specific data was taken from in the source system, or about
a decision that their frontend may have made while creating the
fast-import data stream.

This change introduces comments in the Bourne-shell/Tcl/Perl style.
Lines starting with '#' are ignored, up to and including the LF.
Unlike the above mentioned three languages however we do not look for
and ignore leading whitespace.  This just simplifies the definition
of the comment format and the code that parses them.

To make comments work we had to stop using read_next_command() within
cmd_data() and directly invoke read_line() during the inline variant
of the function.  This is necessary to retain any lines of the
input data that might otherwise look like a comment to fast-import.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-08-19 03:38:35 -04:00
Shawn O. Pearce ea08a6fd19 Actually allow TAG_FIXUP branches in fast-import
Michael Haggerty <mhagger@alum.mit.edu> noticed while debugging a
Git backend for cvs2svn that fast-import was barfing when he tried
to use "TAG_FIXUP" as a branch name for temporary work needed to
cleanup the tree prior to creating an annotated tag object.

The reason we were rejecting the branch name was check_ref_format()
returns -2 when there are less than 2 '/' characters in the input
name.  TAG_FIXUP has 0 '/' characters, but is technically just as
valid of a ref as HEAD and MERGE_HEAD, so we really should permit it
(and any other similar looking name) during import.

New test cases have been added to make sure we still detect very
wrong branch names (e.g. containing [ or starting with .) and yet
still permit reasonable names (e.g. TAG_FIXUP).

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-08-19 03:38:34 -04:00
Jeff King 82cb8afa9b git-diff: turn on recursion by default
The tree recursion behavior of git-diff may appear
inconsistent to the user because it depends on the format of
the patch as well as whether one is diffing between trees or
against the index.

Since git-diff is a porcelain wrapper for low-level diff
commands, it makes sense for its behavior to be consistent
no matter what is being diffed.  This patch turns on
recursion in all cases.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-29 13:24:42 -07:00
Shawn O. Pearce b6f3481bb4 Teach fast-import to recursively copy files/directories
Some source material (e.g. Subversion dump files) perform directory
renames by telling us the directory was copied, then deleted in the
same revision.  This makes it difficult for a frontend to convert
such data formats to a fast-import stream, as all the frontend has
on hand is "Copy a/ to b/; Delete a/" with no details about what
files are in a/, unless the frontend also kept track of all files.

The new 'C' subcommand within a commit allows the frontend to make a
recursive copy of one path to another path within the branch, without
needing to keep track of the individual file paths.  The metadata
copy is performed in memory efficiently, but is implemented as a
copy-immediately operation, rather than copy-on-write.

With this new 'C' subcommand frontends could obviously implement an
'R' (rename) on their own as a combination of 'C' and 'D' (delete),
but since we have already offered up 'R' in the past and it is a
trivial thing to keep implemented I'm not going to deprecate it.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-07-15 01:41:23 -04:00
Shawn O. Pearce f39a946a1f Support wholesale directory renames in fast-import
Some source material (e.g. Subversion dump files) perform directory
renames without telling us exactly which files in that subdirectory
were moved.  This makes it hard for a frontend to convert such data
formats to a fast-import stream, as all the frontend has on hand
is "Rename a/ to b/" with no details about what files are in a/,
unless the frontend also kept track of all files.

The new 'R' subcommand within a commit allows the frontend to
rename either a file or an entire subdirectory, without needing to
know the object's SHA-1 or the specific files contained within it.
The rename is performed as efficiently as possible internally,
making it cheaper than a 'D'/'M' pair for a file rename.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-07-09 23:06:16 -04:00
Junio C Hamano 5be60078c9 Rewrite "git-frotz" to "git frotz"
This uses the remove-dashes target to replace "git-frotz" to "git frotz".

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02 22:52:14 -07:00
Shawn O. Pearce aac65ed1bc Fix possible coredump with fast-import --import-marks
When e8438420bb allowed us to reload
the marks table on subsequent runs of fast-import we really broke
things, as we set pack_id to MAX_PACK_ID for any objects we imported
into the marks table.  Creating a branch from that mark should fail
as we attempt to read the object through a non-existant packed_git
pointer.  Instead we have to use the normal Git object system to
locate the older commit, as we ourselves do not have a reference
to the packed_git it resides in.

This bug only occurred because t9300 was not complete enough.
When we added the --import-marks feature we didn't actually test
its implementation enough to verify the function worked as intended.
I have corrected that, and included the changes as part of this fix.
Prior versions of fast-import fail the new test(s); this commit
allows them to pass.

Credit for this bug find goes to Simon Hausmann <simon@lst.de> as
he recently identified a similiar bug in the tree lazy-loading path.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-24 00:50:19 -04:00
Jeff King e741130386 New fast-import test case for valid tree sorting
The Git tree sorting convention is more complex than just the name,
it needs to include the mode too to make sure trees sort as though
their name ends with "/".

This is a simple test case that verifies fast-import keeps the tree
ordering correct after editing the same tree twice in a single
input stream.  A recent proposed patch series (that has not yet
been applied) will cause this test to fail, due to a bug in the
way the series handles sorting within the trees.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-12 15:02:13 -04:00
Junio C Hamano cf6981d493 Merge branch 'js/diff-ni'
* js/diff-ni:
  Get rid of the dependency to GNU diff in the tests
  diff --no-index: support /dev/null as filename
  diff-ni: fix the diff with standard input
  diff: support reading a file from stdin via "-"
2007-03-10 23:26:33 -08:00
Shawn O. Pearce e8438420bb Allow fast-import frontends to reload the marks table
I'm giving fast-import a lesson on how to reload the marks table
using the same format it outputs with --export-marks.  This way
a frontend can reload the marks table from a prior import, making
incremental imports less painful.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-07 18:07:26 -05:00
Johannes Schindelin 5bd74506cd Get rid of the dependency to GNU diff in the tests
Now that "git diff" handles stdin and relative paths outside the
working tree correctly, we can convert all instances of "diff -u"
to "git diff".

This commit is really the result of

$ perl -pi.bak -e 's/diff -u/git diff/' $(git grep -l "diff -u" t/)

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>

(cherry picked from commit c699a40d68215c7e44a5b26117a35c8a56fbd387)
2007-03-04 00:24:15 -08:00
Shawn O. Pearce ea5e370aa9 fast-import: Support reusing 'from' and brown paper bag fix reset.
It was suggested on the mailing list that being able to use `from`
in any commit to reset the current branch is useful in some types of
importers, such as a darcs importer.

We originally did not permit resetting an existing branch with a
new `from` command during a `commit` command, but this restriction
was only to help debug the hacked up cvs2svn that Jon Smirl was
developing in parallel with git-fast-import.  It is probably more
of a problem to disallow it than to allow it.  So now we permit a
`from` during any `commit`.

While making the changes required to permit multiple `from`
commands on the same branch, I discovered we no longer needed the
last_commit field to be set to 0 during a reset, so that was removed.
(Reset was originally setting the field to 0 to signal cmd_from()
that it was OK to execute on the branch.)

While poking around in this section of fast-import I also realized
the `reset` command was not working as intended if the corresponding
`from` command was omitted (as allowed by the BNF grammar and the
code).  If `from` was omitted we cleared out the tree but we left
the tree SHA-1 and parent commit SHA-1 intact.  This is not what
the user intended in this case.  Instead they would be trying to
reset the branch to have no parent and to have no tree, making the
branch look new-born during the next commit.  We now clear these
SHA-1 values during `reset`, ensuring the branch looks new-born if
`from` does not get supplied.

New test cases for these were also added.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-02-12 12:17:31 -05:00
Shawn O. Pearce bdf1c06dc1 fast-import: Hide the pack boundary commits by default.
Most users don't need the pack boundary information that fast-import
was printing to standard output, especially if they were calling
it with --quiet.

Those users who do want this information probably want it captured
so they can go back and use it to repack the imported repository.
So dumping the boundary commits to a log file makes more sense then
printing them to standard output.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-02-11 19:45:56 -05:00
Shawn O. Pearce 825769a8fe Teach fast-import how to clear the internal branch content.
Some frontends may not be able to (easily) keep track of which files
are included in the branch, and which aren't.  Performing this
tracking can be tedious and error prone for the frontend to do,
especially if its foreign data source cannot supply the changed
path list on a per-commit basis.

fast-import now allows a frontend to request that a branch's tree
be wiped clean (reset to the empty tree) at the start of a commit,
allowing the frontend to feed in all paths which belong on the branch.

This is ideal for a tar-file importer frontend, for example, as
the frontend just needs to reformat the tar data stream into a gfi
data stream, which may be something a few Perl regexps can take
care of. :)

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-02-07 02:03:03 -05:00
Shawn O. Pearce 7073e69e38 Don't do non-fastforward updates in fast-import.
If fast-import is being used to update an existing branch of
a repository, the user may not want to lose commits if another
process updates the same ref at the same time.  For example, the
user might be using fast-import to make just one or two commits
against a live branch.

We now perform a fast-forward check during the ref updating process.
If updating a branch would cause commits in that branch to be lost,
we skip over it and display the new SHA1 to standard error.

This new default behavior can be overridden with `--force`, like
git-push and git-fetch.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-02-06 16:08:06 -05:00
Shawn O. Pearce 63e0c8b364 Support RFC 2822 date parsing in fast-import.
Since some frontends may be working with source material where
the dates are only readily available as RFC 2822 strings, it is
more friendly if fast-import exposes Git's parse_date() function
to handle the conversion.  This way the frontend doesn't need
to perform the parsing itself.

The new --date-format option to fast-import can be used by a
frontend to select which format it will supply date strings in.
The default is the standard `raw` Git format, which fast-import
has always supported.  Format rfc2822 can be used to activate the
parse_date() function instead.

Because fast-import could also be useful for creating new, current
commits, the format `now` is also supported to generate the current
system timestamp.  The implementation of `now` is a trivial call
to datestamp(), but is actually a whole whopping 3 lines so that
fast-import can verify the frontend really meant `now`.

As part of this change I have added validation of the `raw` date
format.  Prior to this change fast-import would accept anything
in a `committer` command, even if it was seriously malformed.
Now fast-import requires the '> ' near the end of the string and
verifies the timestamp is formatted properly.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-02-06 14:58:30 -05:00
Shawn O. Pearce b715cfbba4 Accept 'inline' file data in fast-import commit structure.
Its very annoying to need to specify the file content ahead of a
commit and use marks to connect the individual blobs to the commit's
file modification entry, especially if the frontend can't/won't
generate the blob SHA1s itself.  Instead it would much easier to
use if we can accept the blob data at the same time as we receive
each file_change line.

Now fast-import accepts 'inline' instead of a mark idnum or blob
SHA1 within the 'M' type file_change command.  If an inline is
detected the very next line must be a 'data n' command, supplying
the file data.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-18 15:17:58 -05:00
Shawn O. Pearce 8232dc427f Reduce value duplication in t9300-fast-import.
It is error prone to list the value of each file twice, instead we
should list the value only once early in the script and reuse the
shell variable when we need to access it.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-18 14:49:05 -05:00
Shawn O. Pearce 50aee99512 Create test case for fast-import.
Now that its easier to craft test cases (thanks to 'data <<')
we should start to verify fast-import works as expected.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-18 13:56:06 -05:00