If the call to adjust_shared_perm() fails, lock_file returns -1, which
to the caller looks like any other failure to lock the file. So in
this case, roll back the lockfile before returning so that the lock
file is deleted immediately and the lockfile object is left in a
predictable state (namely, unlocked). Previously, the lockfile was
retained until process cleanup in this situation.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rolling back the lockfile, call close_lock_file() so that the
lock_file's fd field gets set back to -1. This keeps the lock_file
object in a valid state, which is important because these objects are
allowed to be reused. It also makes it unnecessary to check whether
the file has already been closed, because close_lock_file() takes care
of that.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eliminate a layer of nesting.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is only necessary to clear the lock_file's filename field if it was
not already clear.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is used for other things besides the index, so rename it
accordingly.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are cases where you lock and open to write a file, close it to
show the updated contents to external processes, and then have to
update the file again while still holding the lock, but the lockfile
API lacked support for such an access pattern.
* jc/reopen-lock-file:
lockfile: allow reopening a closed but still locked file
The caller, not this function, opened the file descriptor; it is
selfish for the callee to close it when it is done reading from it.
The caller may want an option to rewind and re-read the contents
after it returns.
Simplify the loop to copy the input in full to the output; its
body essentially is what a call to write_in_full() helper does.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Early part of the "ref transaction" topic.
* rs/ref-transaction-0:
refs.c: change ref_transaction_update() to do error checking and return status
refs.c: remove the onerr argument to ref_transaction_commit
update-ref: use err argument to get error from ref_transaction_commit
refs.c: make update_ref_write update a strbuf on failure
refs.c: make ref_update_reject_duplicates take a strbuf argument for errors
refs.c: log_ref_write should try to return meaningful errno
refs.c: make resolve_ref_unsafe set errno to something meaningful on error
refs.c: commit_packed_refs to return a meaningful errno on failure
refs.c: make remove_empty_directories always set errno to something sane
refs.c: verify_lock should set errno to something meaningful
refs.c: make sure log_ref_setup returns a meaningful errno
refs.c: add an err argument to repack_without_refs
lockfile.c: make lock_file return a meaningful errno on failurei
lockfile.c: add a new public function unable_to_lock_message
refs.c: add a strbuf argument to ref_transaction_commit for error logging
refs.c: allow passing NULL to ref_transaction_free
refs.c: constify the sha arguments for ref_transaction_create|delete|update
refs.c: ref_transaction_commit should not free the transaction
refs.c: remove ref_transaction_rollback
In some code paths (e.g. giving "add -i" to prepare the contents to
be committed interactively inside "commit -p") where a caller takes
a lock, writes the new content, give chance for others to use it
while still holding the lock, and then releases the lock when all is
done. As an extension, allow the caller to re-update an already
closed file while still holding the lock (i.e. not yet committed) by
re-opening the file, to be followed by updating the contents and
then by the usual close_lock_file() or commit_lock_file().
This is necessary if we want to add code to rebuild the cache-tree
and write the resulting index out after "add -i" returns the control
to "commit -p", for example.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Making errno when returning from lock_file() meaningful, which should
fix
* an existing almost-bug in lock_ref_sha1_basic where it assumes
errno==ENOENT is meaningful and could waste some work on retries
* an existing bug in repack_without_refs where it prints
strerror(errno) and picks advice based on errno, despite errno
potentially being zero and potentially having been clobbered by
that point
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Introducing a new unable_to_lock_message helper, which has nicer
semantics than unable_to_lock_error and cleans up lockfile.c a little.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
This function is now only used by write_locked_index(). Move it to
read-cache.c (because read-cache.c will need to be aware of
alternate_index_output later) and unexport it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The path of the file to be locked is held in lock_file::filename,
which is a fixed-length buffer of length PATH_MAX. This buffer is
also (temporarily) used to hold the path of the lock file, which is
the path of the file being locked plus ".lock". Because of this, the
path of the file being locked must be less than (PATH_MAX - 5)
characters long (5 chars are needed for ".lock" and one character for
the NUL terminator).
On entry into lock_file(), the path length was only verified to be
less than PATH_MAX characters, not less than (PATH_MAX - 5)
characters.
When and if resolve_symlink() is called, then that function is
correctly told to treat the buffer as (PATH_MAX - 5) characters long.
This part is correct. However:
* If LOCK_NODEREF was specified, then resolve_symlink() is never
called.
* If resolve_symlink() is called but the path is not a symlink, then
the length check is never applied.
So it is possible for a path with length (PATH_MAX - 5 <= len <
PATH_MAX) to make it through the checks. When ".lock" is strcat()ted
to such a path, the lock_file::filename buffer is overflowed.
Fix the problem by adding a check when entering lock_file() that the
original path is less than (PATH_MAX - 5) characters.
[jc: with independent development by Peff]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling a git command from a subdirectory and a file locking fails,
the user will get a path relative to the root of the worktree, which is
invalid from the place where the command is ran. Make it easy for the
user to know which file it is.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the old error message just told the user that it was not
possible to delete the ref from the packed-refs file. Give instructions
on how to resolve the problem.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* ar/unlink-err:
print unlink(2) errno in copy_or_link_directory
replace direct calls to unlink(2) with unlink_or_warn
Introduce an unlink(2) wrapper which gives warning if unlink failed
Essentially; s/type* /type */ as per the coding guidelines.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps to notice when something's going wrong, especially on
systems which lock open files.
I used the following criteria when selecting the code for replacement:
- it was already printing a warning for the unlink failures
- it is in a function which already printing something or is
called from such a function
- it is in a static function, returning void and the function is only
called from a builtin main function (cmd_)
- it is in a function which handles emergency exit (signal handlers)
- it is in a function which is obvously cleaning up the lockfiles
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It looks like someone did 90% of the work, then forgot to actually use
the function in one place.
Also the helper function did not use the correct variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just saying that index.lock exists doesn't tell the user _what_ to do
to fix the problem. We should give an indication that it's normally
safe to delete index.lock after making sure git isn't running here.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code is very inconsistent about which signals
are caught for doing cleanup of temporary files and lock
files. Some callsites checked only SIGINT, while others
checked a variety of death-dealing signals.
This patch factors out those signals to a single function,
and then calls it everywhere. For some sites, that means
this is a simple clean up. For others, it is an improvement
in that they will now properly clean themselves up after a
larger variety of signals.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a piece of code wanted to do some cleanup before exiting
(e.g., cleaning up a lockfile or a tempfile), our usual
strategy was to install a signal handler that did something
like this:
do_cleanup(); /* actual work */
signal(signo, SIG_DFL); /* restore previous behavior */
raise(signo); /* deliver signal, killing ourselves */
For a single handler, this works fine. However, if we want
to clean up two _different_ things, we run into a problem.
The most recently installed handler will run, but when it
removes itself as a handler, it doesn't put back the first
handler.
This patch introduces sigchain, a tiny library for handling
a stack of signal handlers. You sigchain_push each handler,
and use sigchain_pop to restore whoever was before you in
the stack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We cleaned up lockfiles upon receiving the usual suspects HUP, TERM, QUIT
but a wicked user could kill us of asphyxiation by piping our output to a
pipe that does not read. Protect ourselves by catching SIGPIPE and clean
up the lockfiles as well in such a case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the "die_on_error" boolean parameter to a mere "flags", and
changes the existing callers of hold_lock_file_for_update/append()
functions to pass LOCK_DIE_ON_ERROR.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other signals are also common, for example SIGTERM and SIGHUP.
This patch modifies the lock file mechanism to catch more signals.
It also modifies http-push.c which was missing SIGTERM.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/clone-in-c:
Add test for cloning with "--reference" repo being a subset of source repo
Add a test for another combination of --reference
Test that --reference actually suppresses fetching referenced objects
clone: fall back to copying if hardlinking fails
builtin-clone.c: Need to closedir() in copy_or_link_directory()
builtin-clone: fix initial checkout
Build in clone
Provide API access to init_db()
Add a function to set a non-default work tree
Allow for having for_each_ref() list extra refs
Have a constant extern refspec for "--tags"
Add a library function to add an alternate to the alternates file
Add a lockfile function to append to a file
Mark the list of refs to fetch as const
Conflicts:
cache.h
t/t5700-clone-reference.sh
This did not cause any problems, because remove_lock_file_on_signal is
only registered for SIGINT.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This takes care of copying the original contents into the replacement
file after the lock is held, so that concurrent additions can't miss
each other's changes.
[jc: munged to drop mmap in favor of copy_file.]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lockfile API is a handy way to obtain a file that is cleaned
up if you die(). But sometimes you would need this sequence to
work:
1. hold_lock_file_for_update() to get a file descriptor for
writing;
2. write the contents out, without being able to decide if the
results should be committed or rolled back;
3. do something else that makes the decision --- and this
"something else" needs the lockfile not to have an open file
descriptor for writing (e.g. Windows do not want a open file
to be renamed);
4. call commit_lock_file() or rollback_lock_file() as
appropriately.
This adds close_lock_file() you can call between step 2 and 3 in
the above sequence.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the helper function to test for absolute paths makes porting easier.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed on Windows since open files cannot be unlinked.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the code for resolving symlinks in lockfile.c more robust as
follows:
1. Handle relative symlinks
2. recursively resolve symlink chains up to 5
[jc: removed lstat/stat calls to do things stupid way]
Signed-off-by: Bradford C. Smith <bradford.carl.smith@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a working tree prepared in new-workdir (in contrib/), some files in .git/
directory are symbolic links to the original repository. The usual sequence of
lock-write-rename would break the symbolic link.
Ideally we should resolve relative symbolic link with maxdepth, but I do not
want to risk too elaborate patch before 1.5.3 release, so this is a minimum
and trivially obvious fix. new-workdir creates its symbolic links absolute,
and does not link from a symlinked workdir, so this fix should suffice for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual process flow is the main process opens and holds the lock to
the index, does its thing, perhaps spawning children during the course,
and then writes the resulting index out by releaseing the lock.
However, the lockfile interface uses atexit(3) to clean it up, without
regard to who actually created the lock. This typically leads to a
confusing behaviour of lock being released too early when the child
exits, and then the parent process when it calls commit_lockfile()
finds that it cannot unlock it.
This fixes the problem by recording who created and holds the lock, and
upon atexit(3) handler, child simply ignores the lockfile the parent
created.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This corrects the interface mistake of the previous one, and
gives a command line parameter to the only plumbing command that
currently needs it: "git-read-tree".
We can add the calls to set_alternate_index_output() to other
plumbing commands that update the index if/when needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When defined, this allows plumbing commands that update the
index (add, apply, checkout-index, merge-recursive, mv,
read-tree, rm, update-index, and write-tree) to write their
resulting index to an alternative index file while holding a
lock to the original index file. With this, git-commit that
jumps the index does not have to make an extra copy of the index
file, and more importantly, it can do the update while holding
the lock on the index.
However, I think the interface to let an environment variable
specify the output is a mistake, as shown in the documentation.
If a curious user has the environment variable set to something
other than the file GIT_INDEX_FILE points at, almost everything
will break. This should instead be a command line parameter to
tell these plumbing commands to write the result in the named
file, to prevent stupid mistakes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was stupid to link the same element twice to lock_file_list
and end up in a loop, so we certainly need a fix.
But it is not like we are taking a lock on multiple files in
this case. It is just that we leave the linked element on the
list even after commit_lock_file() successfully removes the
cruft.
We cannot remove the list element in commit_lock_file(); if we
are interrupted in the middle of list manipulation, the call to
remove_lock_file_on_signal() will happen with a broken list
structure pointed by lock_file_list, which would cause the cruft
to remain, so not removing the list element is the right thing
to do. Instead we should be reusing the element already on the
list.
There is already a code for that in lock_file() function in
lockfile.c. The code checks lk->next and the element is linked
only when it is not already on the list -- which is incorrect
for the last element on the list (which has NULL in its next
field), but if you read the check as "is this element already on
the list?" it actually makes sense. We do not want to link it
on the list again, nor we would want to set up signal/atexit
over and over.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Most of the callers except the one in refs.c use the function to
update the index file. Among the index writers, everybody
except write-tree dies if they cannot open it for writing.
This gives the function an extra argument, to tell it to die
when it cannot create a new file as the lockfile.
The only caller that does not have to die is write-tree, because
updating the index for the cache-tree part is optional and not
being able to do so does not affect the correctness. I think we
do not have to be so careful and make the failure into die() the
same way as other callers, but that would be a different patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
There were a few calls to adjust_shared_perm() that were
missing:
- init-db creates refs, refs/heads, and refs/tags before
reading from templates that could specify sharedrepository in
the config file;
- updating config file created it under user's umask without
adjusting;
- updating refs created it under user's umask without
adjusting;
- switching branches created .git/HEAD under user's umask
without adjusting.
This moves adjust_shared_perm() from sha1_file.c to path.c,
since a few SIMPLE_PROGRAM need to call repository configuration
functions which in turn need to call adjust_shared_perm().
sha1_file.c needs to link with SHA1 computation library which
is usually not linked to SIMPLE_PROGRAM.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The framework to create lockfiles that are removed at exit is
first used to reliably write the index file, but it is
applicable to other things, so stop calling it "cache_file".
This also rewords a few remaining error message that called the
index file "cache file".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Michael Haggerty
Junio C Hamano
Steffen Prohaska
Ronnie Sahlberg
Nguyễn Thái Ngọc Duy
Carlos Martín Nieto
Matthieu Moy
Miklos Vajna
Felipe Contreras
Alex Riesen
John Tapsell
Jeff King
Paolo Bonzini
Clemens Buchacher
Daniel Barkalow
Brandon Casey
Johannes Schindelin
Bradford C. Smith
Sven Verdoolaege
Junio C Hamano
Steven Grimm