Earlier in 16a4c61, we taught "read-tree -m -u" not to be
confused when switching from a branch that has a path frotz/filfre
to another branch that has a symlink frotz that points at xyzzy/
directory. The fix was incomplete in that it was still confused
when coming back (i.e. switching from a branch with frotz -> xyzzy/
to another branch with frotz/filfre).
This fix is rather expensive in that for a path that is created
we would need to see if any of the leading component of that
path exists as a symbolic link in the filesystem (in which case,
we know that path itself does not exist, and the fact we already
decided to check it out tells us that in the index we already
know that symbolic link is going away as there is no D/F
conflict).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Work around bad interaction between Tcl and cmd.exe on ^{tree}
git-gui: Don't linewrap within console windows
git-gui: Correct ls-tree buffering problem in browser
git-gui: Skip nicknames when selecting author initials
git-gui: Ensure windows shortcuts always have .bat extension
git-gui: Include a Push action on the left toolbar
git-gui: Bind M1-P to push action
git-gui: Don't bind F5/M1-R in all windows
git-gui: Unlock the index when cancelling merge dialog
git-gui: properly popup error if gitk should be started but is not installed
This cat-file was done on maint, where we did not have git_read
available to us. But here on master we do, so we should make
use of it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
From Johannes Sixt <J.Sixt@eudaptics.com>:
> It seems that MSYS's wish does some quoting for Bourne shells,
> in particular, escape the first '{' of the "^{tree}" suffix, but
> then it uses cmd.exe to run "git rev-parse". However, cmd.exe does
> not remove the backslash, so that the resulting rev expression
> ends up in git's guts as unrecognizable garbage: rev-parse fails,
> and git-gui hickups in a way that it must be restarted.
Johannes originally submitted a patch to this section of commit.tcl
to use `git rev-parse $PARENT:`, but not all versions of Git will
accept that format. So I'm just taking the really simple approach
here of scanning the first line of the commit to grab its tree.
About the same cost, but works everywhere.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
An implementation easier to call from builtins. It is designed
to be used from the upcoming builtin-tag.c and builtin-commit.c,
because both need to remove unwanted spaces from messages.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This tool will print vaguely pretty information about a pack. It
expects the output of "git-verify-pack -v" as input on stdin.
$ git-verify-pack -v | packinfo.pl
See the documentation in the script (contrib/stats/packinfo.pl)
for more information.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch cleans up some complicated code, and replaces it with a
cleaner version, using code from remote.[ch], which got extended a
little in the process. This also enables us to fix two cases:
The earlier "fix" to setup tracking only when the original ref started
with "refs/remotes" is wrong. You are absolutely allowed to use a
separate layout for your tracking branches. The correct fix, of course,
is to set up tracking information only when there is a matching
remote.<nick>.fetch line containing a colon.
Another corner case was not handled properly. If two remotes write to
the original ref, just warn the user and do not set up tracking.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function for_each_remote() does exactly what the name
suggests.
The function remote_find_tracking() was extended to be able to
search remote refs for a given local ref. The caller sets
either src or dst (but not both) in the refspec parameter, and
remote_find_tracking() will fill in the other and return 0.
Both changes are required for the next step: simplification of
git-branch's --track functionality.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests check the syntax for the git tag -n option
and its output when one, none or many lines of the
message are requested.
Also this commit adds a missing && in the test
that checks the sorted output of git tag -l.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous tests only had paragraphs of one line. This commit adds some
tests to check when many consecutive text lines are given.
Also, it adds tests for checking that many lines between paragraphs are
correctly reduced to one when there are tabs and spaces in those lines.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Moved some tests to another test_expect_success block.
Many tests now reuse the same "expect" file. Also replacing
many printf "" >expect with one >expect instruction.
Added missing && which concatenated tests in some
test_expect_success blocks.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you say --cherry-pick, you do not want to see patches which are
in the upstream. If you specify paths with that, what you usually
expect is that only those parts of the patches are looked at which
actually touch the given paths.
With this patch, that expectation is met.
Noticed by Sam Vilain.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For compatibility reasons, "git init --shared=all" does not write
"all" into the config, but a number. In the shared setup, you
really have to support even older clients on the _same_ repository.
But git_config_perm() did not pick up on it.
Also, "git update-server-info" failed to pick up on the shared
permissions.
This patch fixes both issues, and adds a test to prove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: martin f krafft <madduck@madduck.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows gitweb users to set $projects_list_description_width
in their gitweb.conf to determine how many characters of a project
description are displayed before being truncated with an ellipsis.
Signed-off-by: Michael Hendricks <michael@ndrix.org>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions for managing ref lists were named based on their use in
match_refs (for push). For fetch, they will be used for other purposes, so
rename them as a separate patch to make the future code readable.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of open-coding allocation wherever it happens, have a function.
Also, add a function to free a list of refs, which we currently never
actually do.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 334d28ae factored out git.o as an intermediate stage between
git.c and git$X. However:
- It left some no-longer-relevant flags in the rule for git$X.
- It failed to replace git$X with git.o in the list of files that
record GIT_VERSION. This broke incorporation of a changed
GIT_VERSION into git$X because, when GIT_VERSION changes, git.o isn't
remade and git$X is relinked from the git.o that still contains the
old GIT_VERSION.
This patch removes the irrelevant flags and fixes incorporation of a
changed GIT_VERSION into git$X.
Signed-off-by: Matt McCutchen <hashproduct@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two-file merges were rare enough that they were dropped outside of the
radar. This fix is a trivial change to builtin-rerere.c::find_conflict().
It is still sane to insist that we do not do rerere for symlinks, and
require to have stages #2 and #3, but we can drop the requirement to have
stage #1. rerere does not use information from there anyway.
This fix is from Junio, together with two tests to verify that it works
as expected.
Acked-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some source material (e.g. Subversion dump files) perform directory
renames without telling us exactly which files in that subdirectory
were moved. This makes it hard for a frontend to convert such data
formats to a fast-import stream, as all the frontend has on hand
is "Rename a/ to b/" with no details about what files are in a/,
unless the frontend also kept track of all files.
The new 'R' subcommand within a commit allows the frontend to
rename either a file or an entire subdirectory, without needing to
know the object's SHA-1 or the specific files contained within it.
The rename is performed as efficiently as possible internally,
making it cheaper than a 'D'/'M' pair for a file rename.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The 'D' subcommand within a commit can also delete a directory
recursively. This wasn't clear in the prior version of the
documentation, leading to a question on the mailing list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because we are trying to execute /bin/sh we know it must be a real
Windows executable and thus ends with the standard .exe suffix.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We cannot execute the git directory, it is not a valid Tcl command
name. Instead we just want to pass it as an argument to our sq
proc.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we get more than 80 characters of text in a single line odds
are it is output from git-fetch or git-push and its showing a
lot of detail off to the right edge that is not so important to
the average user. We still want to make sure we show everything
we need, but we can get away with that information being off to
the side with a horizontal scrollbar.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Our file browser was showing bad output as it did not properly buffer
a partial record when read from `ls-tree -z`. This did not show up on
my Mac OS X system as most trees are small, the pipe buffers generally
big and `ls-tree -z` was generally fast enough that all data was ready
before Tcl started to read. However on my Cygwin system one of my
production repositories had a large enough tree and packfile that it
took a couple of pipe buffers for `ls-tree -z` to complete its dump.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is based on patches from Linus Torvalds and Junio Hamano, so the
ideas here are theirs.
This makes gitk use "git log -z --pretty=raw" instead of "git rev-list"
to generate the list of commits, and also makes it grok the "<" and ">"
markers that git log (and git rev-list) output with the --left-right
flag to indicate which side of a symmetric diff a commit is reachable
from. Left-side commits are drawn with a triangle pointing leftwards
instead of a circle, and right-side commits are drawn with a triangle
pointing rightwards. The commitlisted list is used to store the
left/right information as well as the information about whether each
commit is on the boundary.
Signed-off-by: Paul Mackerras <paulus@samba.org>
In commit 66e46f37de I changed gitk to
store ids in rowrangelist and idrowranges rather than row numbers,
but I missed two places in the layouttail procedure. This resulted
in occasional errors such as the "can't read "commitrow(0,8572)":
no such element in array" error reported by Mark Levedahl. This fixes
it by using the id rather than the row number.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Unroll the prefix stack when assigning treeheights when leaving
proc treeview. Previously, when the ls-tree output ended in
multiple nested directories (for instance in a repository with a
single file "foo/bar/baz"), $treeheight("foo/bar/") was assigned
twice, and $treeheight("foo/") was never assigned. This led to
an error when expanding the "foo" directory in the gitk treeview.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
We now embed any GIT_* and SSH_* environment variables as well as
the path to the git wrapper executable into the Mac OS X .app file.
This should allow us to restore the environment properly when
we restart.
We also try to use proper Bourne shell single quoting when we can,
as this avoids any sort of problems that might occur due to a path
containing shell metacharacters.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that we are pretty strict about setting up own absolute paths to
any git helper (saving a marginal runtime cost to resolve the tool)
we can do the same in our console widget by making sure all console
execs go through git_read if they are a git subcommand, and if not
make sure they at least try to use the Tcl 2>@1 IO redirection if
possible, as it should be faster than |& cat.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Change "try_delta" so that if it finds a delta that has the same size
but shallower depth than the existing delta, it will prefer the
shallower one. This makes certain delta trees vastly less deep.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we cannot locate a .exe for a git tool that we want to run than
it may just be a Bourne shell script as these are popular in Git.
In such a case the first line of the file will say "#!/bin/sh" so
a UNIX kernel knows what program to start to parse and run that.
But Windows doesn't support shbang lines, and neither does the Tcl
that comes with Cygwin.
We can pass control off to the git wrapper as that is a real Cygwin
program and can therefore start the Bourne shell script, but that is
at least two fork+exec calls to get the program running. One to do
the fork+exec of the git wrapper and another to start the Bourne shell
script. If the program is run multiple times it is rather expensive
as the magic shbang detection won't be cached across executions.
On MinGW/MSYS we don't have the luxury of such magic detection. The
MSYS team has taught some of this magic to the git wrapper, but again
its slower than it needs to be as the git wrapper must still go and
run the Bourne shell after it is called.
We now attempt to guess the shbang line on Windows by reading the
first line of the file and building our own command line path from
it. Currently we support Bourne shell (sh), Perl and Python. That
is the entire set of shbang lines that appear in git.git today.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We know that the version subcommand of git is special. It does not
currently have an executable link installed into $gitexecdir and we
therefore would never match it with one of our file exists tests.
So we forward any invocations to it directly to the git wrapper, as
it is a builtin within that executable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we simplify history due to path limits, the parents list
for a rewritten commit can end up having duplicates. Instead of
filtering them out in the output codepath like earlier commit
88494423 did, remove them much earlier, when the parent
information actually gets rewritten.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we cannot locate a command in $gitexecdir on our own then it may
just be because we are supposed to run it by `git $name` rather than
by `git-$name`. Many commands are now builtins, more are likely to
go in that direction, and we may see the hardlinks in $gitexecdir go
away in future versions of git.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The master Makefile in git.git installs gitk into bindir, not
gitexecdir, which means gitk is located as a sibling of the git
wrapper and not as though it were a git helper tool.
We can also avoid some Tcl concat operations by letting eval do
all of the heavy lifting; we have two proper Tcl lists ($cmd and
$revs) that we are joining together and $revs is currently never
an empty list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Rather than making the C library search for git every time we want
to execute it we now search for the main git wrapper at startup, do
symlink resolution, and then always use the absolute path that we
found to execute the binary later on. This should save us some
cycles, especially on stat challenged systems like Cygwin/Win32.
While I was working on this change I also converted all of our
existing pipes ([open "| git ..."]) to use two new pipe wrapper
functions. These functions take additional options like --nice
and --stderr which instructs Tcl to take special action, like
running the underlying git program through `nice` (if available)
or redirect stderr to stdout for capture in Tcl.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sometimes switching between branches can take more than a second or
two, in which case `git checkout` would normally have shown a small
progress meter to the user on the terminal to let them know that we
are in fact working, and give them a reasonable idea of when we may
finish.
We now do obtain that progress meter from read-tree -v and include
it in our main window's status bar. This allows users to see how
many files we have checked out, how many remain, and what percentage
of the operation is completed. It should help to keep users from
getting bored during a large checkout operation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that we have a fancy status bar mega-widget we can reuse that
within our main window. This opens the door for implementating
future improvements like a progress bar.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Our blame viewer has had a very fancy progress bar at the bottom of
the window that shows the current status of the blame engine, which
includes the number of lines completed as both a text and a graphical
meter. I want to reuse this meter system in other places, such as
during a branch switch where read-tree -v can give us a progress
meter for any long-running operation.
This change extracts the code and refactors it as a widget that we
can take advantage of in locations other than in the blame viewer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user double clicks a branch in the checkout dialog then they
probably want to start the checkout process on that branch. I found
myself doing this without realizing it, and of course it did nothing
as there was no action bound to the listbox's Double-Button-1 event
handler. Since I did it without thinking, others will probably also
try, and expect the same behavior.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we have specifications listed in our revision picker mega-widget
then we should default the selection within that widget to the first
ref available. This way the user does not need to use the spacebar
to activate the selection of a ref within the box; instead they can
navigate up/down with the arrow keys and be done with it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the end-user feeds us an abbreviated SHA-1 on the command line for
`git gui browser` or `git gui blame` we now unabbreviate the value
through `git rev-parse` so that the title section of the blame or
browser window shows the user the complete SHA-1 as Git determined
it to be.
If the abbreviated value was ambiguous we now complain with the
standard error message(s) as reported by git-rev-parse --verify,
so that the user can understand what might be wrong and correct
their command line.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Junio C Hamano
Shawn O. Pearce
Carlos Rica
Brian Downing
Johannes Schindelin
Michael Hendricks
Daniel Barkalow
Matt McCutchen
Paul Mackerras