When core.multiPackIndex is true, we may have a multi-pack-index
in our object directory. Add calls to 'git multi-pack-index verify'
at the end of 'git fsck' if so.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git multi-pack-index verify' command must verify the object
offsets stored in the multi-pack-index are correct. There are two
ways the offset chunk can be incorrect: the pack-int-id and the
object offset.
Replace the BUG() statement with a die() statement, now that we
may hit a bad pack-int-id during a 'verify' command on a corrupt
multi-pack-index, and it is covered by a test.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final check we make while loading a multi-pack-index is that
the packfile names are in lexicographical order. Make this error
be a die() instead.
In order to test this condition, we need multiple packfiles.
Earlier in t5319-multi-pack-index.sh, we tested the interaction with
'git repack' but this limits us to one packfile in our object dir.
Move these repack tests until after the 'verify' tests.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When verifying if a multi-pack-index file is valid, we want the
command to fail to signal an invalid file. Previously, we wrote
an error to stderr and continued as if we had no multi-pack-index.
Now, die() instead of error().
Add tests that check corrupted headers in a few ways:
* Bad signature
* Bad file version
* Bad hash version
* Truncated hash count
* Extended hash count
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multi-pack-index builtin writes multi-pack-index files, and
uses a 'write' verb to do so. Add a 'verify' verb that checks this
file matches the contents of the pack-indexes it replaces.
The current implementation is a no-op, but will be extended in
small increments in later commits.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git pack-objects --local', we want to avoid packing
objects that are in an alternate. Currently, we check for these
objects using the packed_git_mru list, which excludes the pack-files
covered by a multi-pack-index.
Add a new iteration over the multi-pack-indexes to find these
copies and mark them as unwanted.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new get_all_packs() method exposed the packfiles coverede by
a multi-pack-index. Before, the 'git cat-file --batch' and
'git count-objects' commands would skip objects in an environment
with a multi-pack-index.
Further, a reachability bitmap would be ignored if its pack-file
was covered by a multi-pack-index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic for constructing the linked list of multi-pack-indexes
in the object store is incorrect. If the local object store has
a multi-pack-index, but an alternate does not, then the list is
dropped.
Add tests that would have revealed this bug.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a 'git repack' command replaces existing packfiles, then we must
clear the existing multi-pack-index before moving the packfiles it
references.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The core.multiPackIndex config setting controls the multi-pack-
index (MIDX) feature. If false, the setting will disable all reads
from the multi-pack-index file.
Read this config setting in the new prepare_multi_pack_index_one()
which is called during prepare_packed_git(). This check is run once
per repository.
Add comparison commands in t5319-multi-pack-index.sh to check
typical Git behavior remains the same as the config setting is turned
on and off. This currently includes 'git rev-list' and 'git log'
commands to trigger several object database reads. Currently, these
would only catch an error in the prepare_multi_pack_index_one(), but
with later commits will catch errors in object lookups, abbreviations,
and approximate object counts.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final pair of chunks for the multi-pack-index file stores the object
offsets. We default to using 32-bit offsets as in the pack-index version
1 format, but if there exists an offset larger than 32-bits, we use a
trick similar to the pack-index version 2 format by storing all offsets
at least 2^31 in a 64-bit table; we use the 32-bit table to point into
that 64-bit table as necessary.
We only store these 64-bit offsets if necessary, so create a test that
manipulates a version 2 pack-index to fake a large offset. This allows
us to test that the large offset table is created, but the data does not
match the actual packfile offsets. The multi-pack-index offset does match
the (corrupted) pack-index offset, so a future feature will compare these
offsets during a 'verify' step.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multi-pack-index needs to track which packfiles it indexes. Store
these in our first required chunk. Since filenames are not well
structured, add padding to keep good alignment in later chunks.
Modify the 'git multi-pack-index read' subcommand to output the
existence of the pack-file name chunk. Modify t5319-multi-pack-index.sh
to reflect this new output and the new expected number of chunks.
Defense in depth: A pattern we are using in the multi-pack-index feature
is to verify the data as we write it. We want to ensure we never write
invalid data to the multi-pack-index. There are many checks that verify
that the values we are writing fit the format definitions. This mainly
helps developers while working on the feature, but it can also identify
issues that only appear when dealing with very large data sets. These
large sets are hard to encode into test cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When constructing a multi-pack-index file for a given object directory,
read the files within the enclosed pack directory and find matches that
end with ".idx" and find the correct paired packfile using
add_packed_git().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we build the multi-pack-index file format, we want to test the format
on real repositories. Add tests that create repository data including
multiple packfiles with both version 1 and version 2 formats.
The current 'git multi-pack-index write' command will always write the
same file with no "real" data. This will be expanded in future commits,
along with the test expectations.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new multi_pack_index struct for loading multi-pack-indexes into
memory. Create a test-tool builtin for reading basic information about
that multi-pack-index to verify the correct data is written.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we begin writing the multi-pack-index format to disk, start with
the basics: the 12-byte header and the 20-byte checksum footer. Start
with these basics so we can add the rest of the format in small
increments.
As we implement the format, we will use a technique to check that our
computed offsets within the multi-pack-index file match what we are
actually writing. Each method that writes to the hashfile will return
the number of bytes written, and we will track that those values match
our expectations.
Currently, write_midx_header() returns 12, but is not checked. We will
check the return value in a later commit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of writing multi-pack-indexes, add a skeleton
'git multi-pack-index write' subcommand and send the options to a
write_midx_file() method. Also create a skeleton test script that
tests the 'write' subcommand.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee
Derrick Stolee