There are cases (e.g. when running concurrent fetches in a repo) where
multiple Git processes concurrently attempt to create loose objects
within the same objects/XX/ dir. The creation of the loose object files
is (AFAICS) safe from races, but the creation of the objects/XX/ dir in
which the loose objects reside is unsafe, for example:
Two concurrent fetches - A and B. As part of its fetch, A needs to store
12aaaaa as a loose object. B, on the other hand, needs to store 12bbbbb
as a loose object. The objects/12 directory does not already exist.
Concurrently, both A and B determine that they need to create the
objects/12 directory (because their first call to git_mkstemp_mode()
within create_tmpfile() fails witn ENOENT). One of them - let's say A -
executes the following mkdir() call before the other. This first call
returns success, and A moves on. When B gets around to calling mkdir(),
it fails with EEXIST, because A won the race. The mkdir() error causes B
to return -1 from create_tmpfile(), which propagates all the way,
resulting in the fetch failing with:
error: unable to create temporary file: File exists
fatal: failed to write object
fatal: unpack-objects failed
Although it's hard to add a testcase reproducing this issue, it's easy
to provoke if we insert a sleep after the
if (mkdir(buffer, 0777) || adjust_shared_perm(buffer))
return -1;
block, and then run two concurrent "git fetch"es against the same repo.
The fix is to simply handle mkdir() failing with EEXIST as a success.
If EEXIST is somehow returned for the wrong reasons (because the relevant
objects/XX is not a directory, or is otherwise unsuitable for object
storage), the following call to adjust_shared_perm(), or ultimately the
retried call to git_mkstemp_mode() will fail, and we end up returning
error from create_tmpfile() in any case.
Note that there are still cases where two users with unsuitable umasks
in a shared repo can end up in two races where one user first wins the
mkdir() race to create an objects/XX/ directory, and then the other user
wins the adjust_shared_perms() race to chmod() that directory, but fails
because it is (transiently, until the first users completes its chmod())
unwriteable to the other user. However, (an equivalent of) this race also
exists before this patch, and is made no worse by this patch.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5b0864070 (sha1_object_info_extended: make type calculation
optional, Jul 12 2013) changed the return value of the
sha1_object_info_extended function to 0/-1 for success/error.
Previously this function returned the object type for success or
-1 for error. But unfortunately the above commit forgot to change
or move the comment above this function that says "returns enum
object_type or negative".
To fix this inconsistency, let's move the comment above the
sha1_object_info function where it is still true.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git_open_noatime` helper can be of general interest for other
consumers of git's different on-disk formats.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an object is not found after checking the packfiles and then
loose object directory, read_sha1_file() re-checks the packfiles to
prevent racing with a concurrent repacker; teach the same logic to
has_sha1_file().
* jk/has-sha1-file-retry-packed:
has_sha1_file: re-check pack directory before giving up
Current code makes pack-objects always do check_pack_crc() in
unpack_entry() even if right after that we find out there's a cached
version and pack access is not needed. Swap two code blocks, search
for cached version first, then check crc.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Handle memory pressure and file descriptor pressure separately when
deciding to release pack windows to honor resource limits.
* bc/unuse-packfile:
Don't close pack fd when free'ing pack windows
sha1_file: introduce close_one_pack() to close packs on fd pressure
When we read a sha1 file, we first look for a packed
version, then a loose version, and then re-check the pack
directory again before concluding that we cannot find it.
This lets us handle a process that is writing to the
repository simultaneously (e.g., receive-pack writing a new
pack followed by a ref update, or git-repack packing
existing loose objects into a new pack).
However, we do not do the same trick with has_sha1_file; we
only check the packed objects once, followed by loose
objects. This means that we might incorrectly report that we
do not have an object, even though we could find it if we
simply re-checked the pack directory.
By itself, this is usually not a big deal. The other process
is running simultaneously, so we may run has_sha1_file
before it writes, anyway. It is a race whether we see the
object or not. However, we may also see other things
the writing process has done (like updating refs); and in
that case, we must be able to also see the new objects.
For example, imagine we are doing a for_each_ref iteration,
and somebody simultaneously pushes. Receive-pack may write
the pack and update a ref after we have examined the
objects/pack directory, but before the iteration gets to the
updated ref. When we do finally see the updated ref,
for_each_ref will call has_sha1_file to check whether the
ref is broken. If has_sha1_file returns the wrong answer, we
erroneously will think that the ref is broken.
For a normal iteration without DO_FOR_EACH_INCLUDE_BROKEN,
this means that the caller does not see the ref at all
(neither the old nor the new value). So not only will we
fail to see the new value of the ref (which is acceptable,
since we are running simultaneously with the writer, and we
might well read the ref before the writer commits its
write), but we will not see the old value either. For
programs that act on reachability like pack-objects or
prune, this can cause data loss, as we may see the objects
referenced by the original ref value as dangling (and either
omit them from the pack, or delete them via prune).
There's no test included here, because the success case is
two processes running simultaneously forever. But you can
replicate the issue with:
# base.sh
# run this in one terminal; it creates and pushes
# repeatedly to a repository
git init parent &&
(cd parent &&
# create a base commit that will trigger us looking at
# the objects/pack directory before we hit the updated ref
echo content >file &&
git add file &&
git commit -m base &&
# set the unpack limit abnormally low, which
# lets us simulate full-size pushes using tiny ones
git config receive.unpackLimit 1
) &&
git clone parent child &&
cd child &&
n=0 &&
while true; do
echo $n >file && git add file && git commit -m $n &&
git push origin HEAD:refs/remotes/child/master &&
n=$(($n + 1))
done
# fsck.sh
# now run this simultaneously in another terminal; it
# repeatedly fscks, looking for us to consider the
# newly-pushed ref broken. We cannot use for-each-ref
# here, as it uses DO_FOR_EACH_INCLUDE_BROKEN, which
# skips the has_sha1_file check (and if it wants
# more information on the object, it will actually read
# the object, which does the proper two-step lookup)
cd parent &&
while true; do
broken=`git fsck 2>&1 | grep remotes/child`
if test -n "$broken"; then
echo $broken
exit 1
fi
done
Without this patch, the fsck loop fails within a few seconds
(and almost instantly if the test repository actually has a
large number of refs). With it, the two can run
indefinitely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that close_one_pack() has been introduced to handle file
descriptor pressure, it is not strictly necessary to close the
pack file descriptor in unuse_one_window() when we're under memory
pressure.
Jeff King provided a justification for leaving the pack file open:
If you close packfile descriptors, you can run into racy situations
where somebody else is repacking and deleting packs, and they go away
while you are trying to access them. If you keep a descriptor open,
you're fine; they last to the end of the process. If you don't, then
they disappear from under you.
For normal object access, this isn't that big a deal; we just rescan
the packs and retry. But if you are packing yourself (e.g., because
you are a pack-objects started by upload-pack for a clone or fetch),
it's much harder to recover (and we print some warnings).
Let's do so (or uh, not do so).
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the number of open packs exceeds pack_max_fds, unuse_one_window()
is called repeatedly to attempt to release the least-recently-used
pack windows, which, as a side-effect, will also close a pack file
after closing its last open window. If a pack file has been opened,
but no windows have been allocated into it, it will never be selected
by unuse_one_window() and hence its file descriptor will not be
closed. When this happens, git may exceed the number of file
descriptors permitted by the system.
This latter situation can occur in show-ref or receive-pack during ref
advertisement. During ref advertisement, receive-pack will iterate
over every ref in the repository and advertise it to the client after
ensuring that the ref exists in the local repository. If the ref is
located inside a pack, then the pack is opened to ensure that it
exists, but since the object is not actually read from the pack, no
mmap windows are allocated. When the number of open packs exceeds
pack_max_fds, unuse_one_window() will not be able to find any windows to
free and will not be able to close any packs. Once the per-process
file descriptor limit is exceeded, receive-pack will produce a warning,
not an error, for each pack it cannot open, and will then most likely
fail with an error to spawn rev-list or index-pack like:
error: cannot create standard input pipe for rev-list: Too many open files
error: Could not run 'git rev-list'
This may also occur during upload-pack when refs are packed (in the
packed-refs file) and the number of packs that must be opened to
verify that these packed refs exist exceeds the file descriptor
limit. If the refs are loose, then upload-pack will read each ref
from the object database (if the object is in a pack, allocating one
or more mmap windows for it) in order to peel tags and advertise the
underlying object. But when the refs are packed and peeled,
upload-pack will use the peeled sha1 in the packed-refs file and
will not need to read from the pack files, so no mmap windows will
be allocated and just like with receive-pack, unuse_one_window()
will never select these opened packs to close.
When we have file descriptor pressure, we just need to find an open
pack to close. We can leave the existing mmap windows open. If
additional windows need to be mapped into the pack file, it will be
reopened when necessary. If the pack file has been rewritten in the
mean time, open_packed_git_1() should notice when it compares the file
size or the pack's sha1 checksum to what was previously read from the
pack index, and reject it.
Let's introduce a new function close_one_pack() designed specifically
for this purpose to search for and close the least-recently-used pack,
where LRU is defined as (in order of preference):
* pack with oldest mtime and no allocated mmap windows
* pack with the least-recently-used windows, i.e. the pack
with the oldest most-recently-used window, where none of
the windows are in use
* pack with the least-recently-used windows
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If somebody wants to only know on-disk footprint of an object
without having to know its type or payload size, we can bypass a
lot of code to cheaply learn it.
* jk/cat-file-batch-optim:
Fix some sparse warnings
sha1_object_info_extended: pass object_info to helpers
sha1_object_info_extended: make type calculation optional
packed_object_info: make type lookup optional
packed_object_info: hoist delta type resolution to helper
sha1_loose_object_info: make type lookup optional
sha1_object_info_extended: rename "status" to "type"
cat-file: disable object/refname ambiguity check for batch mode
Sparse issues some "Using plain integer as NULL pointer" warnings.
Each warning relates to the use of an '{0}' initialiser expression
in the declaration of an 'struct object_info'. The first field of
this structure has pointer type. Thus, in order to suppress these
warnings, we replace the initialiser expression with '{NULL}'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cat-file --batch-check=<format>" is added, primarily to allow
on-disk footprint of objects in packfiles (often they are a lot
smaller than their true size, when expressed as deltas) to be
reported.
* jk/in-pack-size-measurement:
pack-revindex: radix-sort the revindex
pack-revindex: use unsigned to store number of objects
cat-file: split --batch input lines on whitespace
cat-file: add %(objectsize:disk) format atom
cat-file: add --batch-check=<format>
cat-file: refactor --batch option parsing
cat-file: teach --batch to stream blob objects
t1006: modernize output comparisons
teach sha1_object_info_extended a "disk_size" query
zero-initialize object_info structs
We take in a "struct object_info" which contains pointers to
storage for items the caller cares about. But then rather
than pass the whole object to the low-level loose/packed
helper functions, we pass the individual pointers.
Let's pass the whole struct instead, which will make adding
more items later easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each caller of sha1_object_info_extended sets up an
object_info struct to tell the function which elements of
the object it wants to get. Until now, getting the type of
the object has always been required (and it is returned via
the return type rather than a pointer in object_info).
This can involve actually opening a loose object file to
determine its type, or following delta chains to determine a
packed file's base type. These effects produce a measurable
slow-down when doing a "cat-file --batch-check" that does
not include %(objecttype).
This patch adds a "typep" query to struct object_info, so
that it can be optionally queried just like size and
disk_size. As a result, the return type of the function is
no longer the object type, but rather 0/-1 for success/error.
As there are only three callers total, we just fix up each
caller rather than keep a compatibility wrapper:
1. The simpler sha1_object_info wrapper continues to
always ask for and return the type field.
2. The istream_source function wants to know the type, and
so always asks for it.
3. The cat-file batch code asks for the type only when
%(objecttype) is part of the format string.
On linux.git, the best-of-five for running:
$ git rev-list --objects --all >objects
$ time git cat-file --batch-check='%(objectsize:disk)'
on a fully packed repository goes from:
real 0m8.680s
user 0m8.160s
sys 0m0.512s
to:
real 0m7.205s
user 0m6.580s
sys 0m0.608s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, packed_object_info can save some work by not
calculating the size or disk_size of the object if the
caller is not interested. However, it always calculates the
true object type, whether the caller cares or not, and only
optionally returns the easy-to-get "representation type".
Let's swap these types. The function will now return the
representation type (or OBJ_BAD on failure), and will only
optionally fill in the true type.
There should be no behavior change yet, as the only caller,
sha1_object_info_extended, will always feed it a type
pointer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To calculate the type of a packed object, we must walk down
its delta chain until we hit a true base object with a real
type. Most of the code in packed_object_info is for handling
this case.
Let's hoist it out into a separate helper function, which
will make it easier to make the type-lookup optional in the
future (and keep our indentation level sane).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until recently, the only items to request from
sha1_object_info_extended were type and size. This meant
that we always had to open a loose object file to determine
one or the other. But with the addition of the disk_size
query, it's possible that we can fulfill the query without
even opening the object file at all. However, since the
function interface always returns the type, we have no way
of knowing whether the caller cares about it or not.
This patch only modified sha1_loose_object_info to make type
lookup optional using an out-parameter, similar to the way
the size is handled (and the return value is "0" or "-1" for
success or error, respectively).
There should be no functional change yet, though, as
sha1_object_info_extended, the only caller, will always ask
for a type.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The value we get from each low-level object_info function
(e.g., loose, packed) is actually the object type (or -1 for
error). Let's explicitly call it "type", which will make
further refactorings easier to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using sha1_object_info_extended, a caller can find out the
type of an object, its size, and information about where it
is stored. In addition to the object's "true" size, it can
also be useful to know the size that the object takes on
disk (e.g., to generate statistics about which refs consume
space).
This patch adds a "disk_sizep" field to "struct object_info",
and fills it in during sha1_object_info_extended if it is
non-NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sha1_object_info_extended function expects the caller to
provide a "struct object_info" which contains pointers to
"query" items that will be filled in. The purpose of
providing pointers rather than storing the response directly
in the struct is so that callers can choose not to incur the
expense in finding particular fields that they do not care
about.
Right now the only query item is "sizep", and all callers
set it explicitly to choose whether or not to query it; they
can then leave the rest of the struct uninitialized.
However, as we add new query items, each caller will have to
be updated to explicitly turn off the new ones (by setting
them to NULL). Instead, let's teach each caller to
zero-initialize the struct, so that they do not have to
learn about each new query item added.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we try to load an object from disk and fail, our
general strategy is to see if we can get it from somewhere
else (e.g., a loose object). That lets users fix corruption
problems by copying known-good versions of objects into the
object database.
We already handle the case where we were not able to read
the delta from disk. However, when we find that the delta we
read does not apply, we simply die. This case is harder to
trigger, as corruption in the delta data itself would
trigger a crc error from zlib. However, a corruption that
pointed us at the wrong delta base might cause it.
We can do the same "fail and try to find the object
elsewhere" trick instead of dying. This not only gives us a
chance to recover, but also puts us on code paths that will
alert the user to the problem (with the current message,
they do not even know which sha1 caused the problem).
Note that unlike some other pack corruptions, we do not
recover automatically from this case when doing a repack.
There is nothing apparently wrong with the delta, as it
points to a valid, accessible object, and we realize the
error only when the resulting size does not match up. And in
theory, one could even have a case where the corrupted size
is the same, and the problem would only be noticed by
recomputing the sha1.
We can get around this by recomputing the deltas with
--no-reuse-delta, which our test does (and this is probably
good advice for anyone recovering from pack corruption).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
5f44324 (core: log offset pack data accesses happened - 2011-07-06)
provides a way to observe pack access patterns via a config
switch. Setting an environment variable looks more obvious than a
config var, especially when you just need to _observe_, and more
inline with other tracing knobs we have.
Document it as it may be useful for remote troubleshooting.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_object_info() returns -1 (OBJ_BAD) if it cannot find the object
for some reason, which suggests that it wants the _caller_ to report
this error. However, part of its work happens in
sha1_loose_object_info, which _does_ report errors itself. This is
doubly strange because:
* packed_object_info(), which is the other half of the duo, does _not_
report this.
* In the event that an object is packed and pruned while
sha1_object_info_extended() goes looking for it, we would
erroneously show the error -- even though the code of the latter
function purports to handle this case gracefully.
* A caller might invoke sha1_object_info() to find the type of an
object even if that object is not known to exist.
Silence this error. The others remain untouched as a corrupt object
is a much more grave error than it merely being absent.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the !delta_data error path of unpack_entry(), we run free(base).
This became a window for use-after-free() in abe601b (sha1_file:
remove recursion in unpack_entry, 2013-03-27), as follows:
Before abe601b, we got the 'base' from cache_or_unpack_entry(..., 0);
keep_cache=0 tells it to also remove that entry. So the 'base' is at
this point not cached, and freeing it in the error path is the right
thing.
After abe601b, the structure changed: we use a three-phase approach
where phase 1 finds the innermost base or a base that is already in
the cache. In phase 3 we therefore know that all bases we unpack are
not part of the delta cache yet. (Observe that we pop from the cache
in phase 1, so this is also true for the very first base.) So we make
no further attempts to look up the bases in the cache, and just call
add_delta_base_cache() on every base object we have assembled.
But the !delta_data error path remained unchanged, and now calls
free() on a base that has already been entered in the cache. This
means that there is a use-after-free if we later use the same base
again.
So remove that free(); we are still going to use that data.
Reported-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attempts to reduce the stack footprint of sha1_object_info()
and unpack_entry() codepaths.
* tr/packed-object-info-wo-recursion:
sha1_file: remove recursion in unpack_entry
Refactor parts of in_delta_base_cache/cache_or_unpack_entry
sha1_file: remove recursion in packed_object_info
Have the streaming interface and other codepaths more carefully
examine for corrupt objects.
* jk/check-corrupt-objects-carefully:
clone: leave repo in place after checkout errors
clone: run check_everything_connected
clone: die on errors from unpack_trees
add tests for cloning corrupted repositories
streaming_write_entry: propagate streaming errors
add test for streaming corrupt blobs
avoid infinite loop in read_istream_loose
read_istream_filtered: propagate read error from upstream
check_sha1_signature: check return value from read_istream
stream_blob_to_fd: detect errors reading from stream
It's possible for read_istream to return an error, in which
case we just end up in an infinite loop (aside from EOF, we
do not even look at the result, but just feed it straight
into our running hash).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the recursion in packed_object_info(), this leads to
problems on stack-space-constrained systems in the presence of long
delta chains.
We proceed in three phases:
1. Dig through the delta chain, saving each delta object's offsets and
size on an ad-hoc stack.
2. Unpack the base object at the bottom.
3. Unpack and apply the deltas from the stack.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The delta base cache lookup and test were shared. Refactor them;
we'll need both parts again. Also, we'll use the clearing routine
later.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If two processes are racing to create the same directory tree, they
will both see that the directory doesn't exist, both try to mkdir(),
and one of them will fail. This is okay, as we only care that the
directory gets created. So, we add a check for EEXIST from mkdir,
and continue when the directory exists, taking the same codepath as
the case where the earlier stat() succeeds and finds a directory.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
packed_object_info() and packed_delta_info() were mutually recursive.
The former would handle ordinary types and defer deltas to the latter;
the latter would use the former to resolve the delta base.
This arrangement, however, leads to trouble with threaded index-pack
and long delta chains on platforms where thread stacks are small, as
happened on OS X (512kB thread stacks by default) with the chromium
repo.
The task of the two functions is not all that hard to describe without
any recursion, however. It proceeds in three steps:
- determine the representation type and size, based on the outermost
object (delta or not)
- follow through the delta chain, if any
- determine the object type from what is found at the end of the delta
chain
The only complication stems from the error recovery. If parsing fails
at any step, we want to mark that object (within the pack) as bad and
try getting the corresponding SHA1 from elsewhere. If that also
fails, we want to repeat this process back up the delta chain until we
find a reasonable solution or conclude that there is no way to
reconstruct the object. (This is conveniently checked by t5303.)
To achieve that within the pack, we keep track of the entire delta
chain in a stack. When things go sour, we process that stack from the
top, marking entries as bad and attempting to re-resolve by sha1. To
avoid excessive malloc(), the stack starts out with a small
stack-allocated array. The choice of 64 is based on the default of
pack.depth, which is 50, in the hope that it covers "most" delta
chains without any need for malloc().
It's much harder to make the actual re-resolving by sha1 nonrecursive,
so we skip that. If you can't afford *that* recursion, your
corruption problems are more serious than your stack size problems.
Reported-by: Stefan Zager <szager@google.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prepare_packed_git_one() is modified to allow count-objects to hook a
report function to so we don't need to duplicate the pack searching
logic in count-objects.c. When report_pack_garbage is NULL, the
overhead is insignificant.
The garbage is reported with warning() instead of error() in packed
garbage case because it's not an error to have garbage. Loose garbage
is still reported as errors and will be converted to warnings later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current loop does
while (...) {
if (it is not an .idx file)
continue;
process .idx file;
}
and is reordered to
while (...) {
if (it is an .idx file) {
process .idx file;
}
}
This makes it easier to add new extension file processing.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change link_alt_odb_entries() to take the length of the "alt"
parameter rather than a pointer to the end of the "alt" string. This
is the more common calling convention and simplifies the code a tiny
bit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Change link_alt_odb_entry() to take a NUL-terminated string instead of
(char *, len). Use string_list_split_in_place() rather than inline
code in link_alt_odb_entries().
This approach saves some code and also avoids the (probably harmless)
error of passing a non-NUL-terminated string to is_absolute_path().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Not all platforms have getrlimit(), but there are other ways to see
the maximum number of files that a process can have open. If
getrlimit() is unavailable, fall back to sysconf(_SC_OPEN_MAX) if
available, and use OPEN_MAX from <limits.h>.
Signed-off-by: Joachim Schmitz <jojo@schmitz-digital.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to avoid mistaken attempt to add the object directory
itself as its own alternate could read beyond end of a string while
comparison.
* hv/link-alt-odb-entry:
link_alt_odb_entry: fix read over array bounds reported by valgrind
pfxlen can be longer than the path in objdir when relative_base
contains the path to gits object directory. Here we are interested
in checking if ent->base[] (the part that corresponds to .git/objects)
is the same string as objdir, and the code NUL-terminated ent->base[]
to
LEADING PATH\0XX/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\0
in preparation for these "duplicate check" step (before we return
from the function, the first NUL is turned into '/' so that we can
fill XX when probing for loose objects). All we need to do is to
compare the string with the path to our object directory.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When peeking into object stores of submodules, the code forgot that they
might borrow objects from alternate object stores on their own.
By Heiko Voigt
* hv/submodule-alt-odb:
teach add_submodule_odb() to look for alternates
Since we allow to link other object databases when loading a submodules
database we should also load possible alternates.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When write_loose_object() finds that it is unable to
create a temporary file, it complains, for instance:
unable to create temporary sha1 filename : Too many open files
That extra space was supposed to be the name of the file,
and will be an empty string if the git_mkstemps_mode() fails.
The name of the temporary file is unimportant; delete it.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error handling routines add a newline. Remove
the duplicate ones in error messages.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, all the callers of check_sha1_signature() first
called read_sha1_file() to prepare the whole object data in core,
and called this function. The function is used to revalidate what
we read from the object database actually matches the object name we
used to ask for the data from the object database.
Update the API to allow callers to pass NULL as the object data, and
have the function read and hash the object data using streaming API
to recompute the object name, without having to hold everything in
core at the same time. This is most useful in parse_object() that
parses a blob object, because this caller does not have to keep the
actual blob data around in memory after a "struct blob" is returned.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-avoid-streaming-filtered-contents:
do not stream large files to pack when filters are in use
teach dry-run convert_to_git not to require a src buffer
teach convert_to_git a "dry run" mode
* jk/maint-avoid-streaming-filtered-contents:
do not stream large files to pack when filters are in use
teach dry-run convert_to_git not to require a src buffer
teach convert_to_git a "dry run" mode
Because git's object format requires us to specify the
number of bytes in the object in its header, we must know
the size before streaming a blob into the object database.
This is not a problem when adding a regular file, as we can
get the size from stat(). However, when filters are in use
(such as autocrlf, or the ident, filter, or eol
gitattributes), we have no idea what the ultimate size will
be.
The current code just punts on the whole issue and ignores
filter configuration entirely for files larger than
core.bigfilethreshold. This can generate confusing results
if you use filters for large binary files, as the filter
will suddenly stop working as the file goes over a certain
size. Rather than try to handle unknown input sizes with
streaming, this patch just turns off the streaming
optimization when filters are in use.
This has a slight performance regression in a very specific
case: if you have autocrlf on, but no gitattributes, a large
binary file will avoid the streaming code path because we
don't know beforehand whether it will need conversion or
not. But if you are handling large binary files, you should
be marking them as such via attributes (or at least not
using autocrlf, and instead marking your text files as
such). And the flip side is that if you have a large
_non_-binary file, there is a correctness improvement;
before we did not apply the conversion at all.
The first half of the new t1051 script covers these failures
on input. The second half tests the matching output code
paths. These already work correctly, and do not need any
adjustment.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/find-pack-entry-recent-cache-invalidation:
find_pack_entry(): do not keep packed_git pointer locally
sha1_file.c: move the core logic of find_pack_entry() into fill_pack_entry()
* nd/find-pack-entry-recent-cache-invalidation:
find_pack_entry(): do not keep packed_git pointer locally
sha1_file.c: move the core logic of find_pack_entry() into fill_pack_entry()
Since 3ba7a06552 (A loose object is not corrupt if it
cannot be read due to EMFILE), "git fsck" on a repository with an empty
loose object file complains with the error message
fatal: failed to read object <sha1>: Invalid argument
This comes from a failure of mmap on this empty file, which sets errno to
EINVAL. Instead of calling xmmap on empty file, we display a clean error
message ourselves, and return a NULL pointer. The new message is
error: object file .git/objects/09/<rest-of-sha1> is empty
fatal: loose object <sha1> (stored in .git/objects/09/<rest-of-sha1>) is corrupt
The second line was already there before the regression in 3ba7a06552,
and the first is an additional message, that should help diagnosing the
problem for the user.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit f7c22cc (always start looking up objects in the last used pack
first - 2007-05-30) introduce a static packed_git* pointer as an
optimization. The kept pointer however may become invalid if
free_pack_by_name() happens to free that particular pack.
Current code base does not access packs after calling
free_pack_by_name() so it should not be a problem. Anyway, move the
pointer out so that free_pack_by_name() can reset it to avoid running
into troubles in future.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new helper function implements the logic to find the offset for the
object in one pack and fill a pack_entry structure. The next patch will
restructure the loop and will call the helper from two places.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Solaris the system headers define the "tmpfile" name, which'll
cause Git compiled with Sun Studio 12 Update 1 to whine about us
redefining the name:
"pack-write.c", line 76: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"sha1_file.c", line 2455: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"fast-import.c", line 858: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"builtin/index-pack.c", line 175: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
Just renaming the "tmpfile" variable to "tmp_file" in the relevant
places is the easiest way to fix this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/stream-to-pack:
bulk-checkin: replace fast-import based implementation
csum-file: introduce sha1file_checkpoint
finish_tmp_packfile(): a helper function
create_tmp_packfile(): a helper function
write_pack_header(): a helper function
Conflicts:
pack.h
* nd/misc-cleanups:
unpack_object_header_buffer(): clear the size field upon error
tree_entry_interesting: make use of local pointer "item"
tree_entry_interesting(): give meaningful names to return values
read_directory_recursive: reduce one indentation level
get_tree_entry(): do not call find_tree_entry() on an empty tree
tree-walk.c: do not leak internal structure in tree_entry_len()
* nd/misc-cleanups:
unpack_object_header_buffer(): clear the size field upon error
tree_entry_interesting: make use of local pointer "item"
tree_entry_interesting(): give meaningful names to return values
read_directory_recursive: reduce one indentation level
get_tree_entry(): do not call find_tree_entry() on an empty tree
tree-walk.c: do not leak internal structure in tree_entry_len()
This extends the earlier approach to stream a large file directly from the
filesystem to its own packfile, and allows "git add" to send large files
directly into a single pack. Older code used to spawn fast-import, but the
new bulk-checkin API replaces it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callers do not use the returned size when the function says
it did not use any bytes and sets the type to OBJ_BAD, so this
should not matter in practice, but it is a good code hygiene
anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-pack-objects-compete-with-delete:
downgrade "packfile cannot be accessed" errors to warnings
pack-objects: protect against disappearing packs
These can happen if another process simultaneously prunes a
pack. But that is not usually an error condition, because a
properly-running prune should have repacked the object into
a new pack. So we will notice that the pack has disappeared
unexpectedly, print a message, try other packs (possibly
after re-scanning the list of packs), and find it in the new
pack.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible that while pack-objects is running, a
simultaneously running prune process might delete a pack
that we are interested in. Because we load the pack indices
early on, we know that the pack contains our item, but by
the time we try to open and map it, it is gone.
Since c715f78, we already protect against this in the normal
object access code path, but pack-objects accesses the packs
at a lower level. In the normal access path, we call
find_pack_entry, which will call find_pack_entry_one on each
pack index, which does the actual lookup. If it gets a hit,
we will actually open and verify the validity of the
matching packfile (using c715f78's is_pack_valid). If we
can't open it, we'll issue a warning and pretend that we
didn't find it, causing us to go on to the next pack (or on
to loose objects).
Furthermore, we will cache the descriptor to the opened
packfile. Which means that later, when we actually try to
access the object, we are likely to still have that packfile
opened, and won't care if it has been unlinked from the
filesystem.
Notice the "likely" above. If there is another pack access
in the interim, and we run out of descriptors, we could
close the pack. And then a later attempt to access the
closed pack could fail (we'll try to re-open it, of course,
but it may have been deleted). In practice, this doesn't
happen because we tend to look up items and then access them
immediately.
Pack-objects does not follow this code path. Instead, it
accesses the packs at a much lower level, using
find_pack_entry_one directly. This means we skip the
is_pack_valid check, and may end up with the name of a
packfile, but no open descriptor.
We can add the same is_pack_valid check here. Unfortunately,
the access patterns of pack-objects are not quite as nice
for keeping lookup and object access together. We look up
each object as we find out about it, and the only later when
writing the packfile do we necessarily access it. Which
means that the opened packfile may be closed in the interim.
In practice, however, adding this check still has value, for
three reasons.
1. If you have a reasonable number of packs and/or a
reasonable file descriptor limit, you can keep all of
your packs open simultaneously. If this is the case,
then the race is impossible to trigger.
2. Even if you can't keep all packs open at once, you
may end up keeping the deleted one open (i.e., you may
get lucky).
3. The race window is shortened. You may notice early that
the pack is gone, and not try to access it. Triggering
the problem without this check means deleting the pack
any time after we read the list of index files, but
before we access the looked-up objects. Triggering it
with this check means deleting the pack means deleting
the pack after we do a lookup (and successfully access
the packfile), but before we access the object. Which
is a smaller window.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When it needs to compare and add an alt object path to the
alt_odb_list, we normalize this path first since comparing normalized
path is easy to get correct result.
Use strbuf to replace some string operations, since it is cleaner and
safer.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Hui Wang <Hui.Wang@windriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning from a local repository blindly copies or hardlinks all the files
under objects/ hierarchy. This results in two issues:
- If the repository cloned has an "objects/info/alternates" file, and the
command line of clone specifies --reference, the ones specified on the
command line get overwritten by the copy from the original repository.
- An entry in a "objects/info/alternates" file can specify the object
stores it borrows objects from as a path relative to the "objects/"
directory. When cloning a repository with such an alternates file, if
the new repository is not sitting next to the original repository, such
relative paths needs to be adjusted so that they can be used in the new
repository.
This updates add_to_alternates_file() to take the path to the alternate
object store, including the "/objects" part at the end (earlier, it was
taking the path to $GIT_DIR and was adding "/objects" itself), as it is
technically possible to specify in objects/info/alternates file the path
of a directory whose name does not end with "/objects".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git currently reports loose objects as 'corrupt' if they've been
deflated using a window size less than 32Kb, because the
experimental_loose_object() function doesn't recognise the header
byte as a zlib header. This patch makes the function tolerant of
all valid window sizes (15-bit to 8-bit) - but doesn't sacrifice
it's accuracy in distingushing the standard loose-object format
from the experimental (now abandoned) format.
On memory constrained systems zlib may use a much smaller window
size - working on Agit, I found that Android uses a 4KB window;
giving a header byte of 0x48, not 0x78. Consequently all loose
objects generated appear 'corrupt', which is why Agit is a read-only
Git client at this time - I don't want my client to generate Git
repos that other clients treat as broken :(
This patch makes Git tolerant of different deflate settings - it
might appear that it changes experimental_loose_object() to the point
where it could incorrectly identify the experimental format as the
standard one, but the two criteria (bitmask & checksum) can only
give a false result for an experimental object where both of the
following are true:
1) object size is exactly 8 bytes when uncompressed (bitmask)
2) [single-byte in-pack git type&size header] * 256
+ [1st byte of the following zlib header] % 31 = 0 (checksum)
As it happens, for all possible combinations of valid object type
(1-4) and window bits (0-7), the only time when the checksum will be
divisible by 31 is for 0x1838 - ie object type *1*, a Commit - which,
due the fields all Commit objects must contain, could never be as
small as 8 bytes in size.
Given this, the combination of the two criteria (bitmask & checksum)
always correctly determines the buffer format, and is more tolerant
than the previous version.
The alternative to this patch is simply removing support for the
experimental format, which I am also totally cool with.
References:
Android uses a 4KB window for deflation:
http://android.git.kernel.org/?p=platform/libcore.git;a=blob;f=luni/src/main/native/java_util_zip_Deflater.cpp;h=c0b2feff196e63a7b85d97cf9ae5bb2583409c28;hb=refs/heads/gingerbread#l53
Code snippet searching for false positives with the zlib checksum:
https://gist.github.com/1118177
Signed-off-by: Roberto Tyley <roberto.tyley@guardian.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/index-pack:
verify-pack: use index-pack --verify
index-pack: show histogram when emulating "verify-pack -v"
index-pack: start learning to emulate "verify-pack -v"
index-pack: a miniscule refactor
index-pack --verify: read anomalous offsets from v2 idx file
write_idx_file: need_large_offset() helper function
index-pack: --verify
write_idx_file: introduce a struct to hold idx customization options
index-pack: group the delta-base array entries also by type
Conflicts:
builtin/verify-pack.c
cache.h
sha1_file.c
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
Conflicts:
sha1_file.c
In a workload other than "git log" (without pathspec nor any option that
causes us to inspect trees and blobs), the recency pack order is said to
cause the access jump around quite a bit. Add a hook to allow us observe
how bad it is.
"git config core.logpackaccess /var/tmp/pal.txt" will give you the log
in the specified file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The size of objects we read from the repository and data we try to put
into the repository are represented in "unsigned long", so that on larger
architectures we can handle objects that weigh more than 4GB.
But the interface defined in zlib.h to communicate with inflate/deflate
limits avail_in (how many bytes of input are we calling zlib with) and
avail_out (how many bytes of output from zlib are we ready to accept)
fields effectively to 4GB by defining their type to be uInt.
In many places in our code, we allocate a large buffer (e.g. mmap'ing a
large loose object file) and tell zlib its size by assigning the size to
avail_in field of the stream, but that will truncate the high octets of
the real size. The worst part of this story is that we often pass around
z_stream (the state object used by zlib) to keep track of the number of
used bytes in input/output buffer by inspecting these two fields, which
practically limits our callchain to the same 4GB limit.
Wrap z_stream in another structure git_zstream that can express avail_in
and avail_out in unsigned long. For now, just die() when the caller gives
a size that cannot be given to a single zlib call. In later patches in the
series, we would make git_inflate() and git_deflate() internally loop to
give callers an illusion that our "improved" version of zlib interface can
operate on a buffer larger than 4GB in one go.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap deflateInit, deflate, and deflateEnd for everybody, and the sole use
of deflateInit2 in remote-curl.c to tell the library to use gzip header
and trailer in git_deflate_init_gzip().
There is only one caller that cares about the status from deflateEnd().
Introduce git_deflate_end_gently() to let that sole caller retrieve the
status and act on it (i.e. die) for now, but we would probably want to
make inflate_end/deflate_end die when they ran out of memory and get
rid of the _gently() kind.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every time I look at the read-loose-object codepath, legacy_loose_object()
function makes my brain go through mental contortion. When we were playing
with the experimental loose object format, it may have made sense to call
the traditional format "legacy", in the hope that the experimental one
will some day replace it to become official, but it never happened.
This renames the function (and negates its return value) to detect if we
are looking at the experimental format, and move the code around in its
caller which used to do "if we are looing at legacy, do this special case,
otherwise the normal case is this". The codepath to read from the loose
objects in experimental format is the "unlikely" case.
Someday after Git 2.0, we should drop the support of this format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This finally gets rid of the inefficient verify-pack implementation that
walks objects in the packfile in their object name order and replaces it
with a call to index-pack --verify. As a side effect, it also removes
packed_object_info_detail() API which is rather expensive.
As this changes the way errors are reported (verify-pack used to rely on
the usual runtime error detection routine unpack_entry() to diagnose the
CRC errors in an entry in the *.idx file; index-pack --verify checks the
whole *.idx file in one go), update a test that expected the string "CRC"
to appear in the error message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using an unsigned type, we would fail to detect a read error and then
proceed to try to write (size_t)-1 bytes.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/bigfile:
Bigfile: teach "git add" to send a large file straight to a pack
index_fd(): split into two helper functions
index_fd(): turn write_object and format_check arguments into one flag
Make map_sha1_file(), parse_sha1_header() and unpack_sha1_header()
available to the streaming read API by exporting them via cache.h header
file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An object found in the delta-base cache is not guaranteed to
stay there, but we know it came from a pack and it is likely
to give us a quick access if we read_sha1_file() it right now,
which is a piece of useful information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/replacing:
read_sha1_file(): allow selective bypassing of replacement mechanism
inline lookup_replace_object() calls
read_sha1_file(): get rid of read_sha1_file_repl() madness
t6050: make sure we test not just commit replacement
Declare lookup_replace_object() in cache.h, not in commit.h
Conflicts:
environment.c
The original interface for sha1_object_info() takes an object name and
gives back a type and its size (the latter is given only when it was
asked). The new interface wraps its implementation and exposes a bit
more pieces of information that the interface used to discard, namely:
- where the object is stored (loose? cached? packed?)
- if packed, where in which packfile?
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
* In the earlier round, this used u.pack.delta to record the length of
the delta chain, but the caller is not necessarily interested in the
length of the delta chain per-se, but may only want to know if it is a
delta against another object or is stored as a deflated data. Calling
packed_object_info_detail() involves walking the reverse index chain to
compute the store size of the object and is unnecessarily expensive.
We could resurrect the code if a new caller wants to know, but I doubt
it.
Instead return an integer that can be given to typename() if
the caller wants a string, just like everybody else does.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/convert:
convert: make it harder to screw up adding a conversion attribute
convert: make it safer to add conversion attributes
convert: give saner names to crlf/eol variables, types and functions
convert: rename the "eol" global variable to "core_eol"
* jc/bigfile:
Bigfile: teach "git add" to send a large file straight to a pack
index_fd(): split into two helper functions
index_fd(): turn write_object and format_check arguments into one flag
* jc/replacing:
read_sha1_file(): allow selective bypassing of replacement mechanism
inline lookup_replace_object() calls
read_sha1_file(): get rid of read_sha1_file_repl() madness
t6050: make sure we test not just commit replacement
Declare lookup_replace_object() in cache.h, not in commit.h
Since commit c793430 (Limit file descriptors used by packs, 2011-02-28),
the extra parameter added in f2e872aa (Work around EMFILE when there are
too many pack files, 2010-11-01) is not used anymore.
Remove it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
The way "object replacement" mechanism was tucked to the read_sha1_file()
interface was suboptimal in a couple of ways:
- Callers that want it to die with useful diagnosis upon seeing a corrupt
object does not have a way to say that they do not want any object
replacement.
- Callers who do not want it to die but want to handle the errors
themselves are told to arrange to call read_object(), but the function
does not use the replacement mechanism, and also it is a file scope
static function that not many callers can call to begin with.
This adds a read_sha1_file_extended() that takes a set of flags; the
callers of read_sha1_file() passes a flag READ_SHA1_FILE_REPLACE to ask
for object replacement mechanism to kick in.
Later, we could add another flag bit to tell the function to return an
error instead of dying and then remove the misguided "call read_object()
yourself".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most callers want to silently get a replacement object, and they do not
care what the real name of the replacement object is. Worse yet, no sane
interface to return the underlying object without replacement is provided.
Remove the function and make only the few callers that want the name of
the replacement object find it themselves.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding a new content to the repository, we have always slurped
the blob in its entirety in-core first, and computed the object name
and compressed it into a loose object file. Handling large binary
files (e.g. video and audio asset for games) has been problematic
because of this design.
At the middle level of "git add" callchain is an internal API
index_fd() that takes an open file descriptor to read from the
working tree file being added with its size. Teach it to call out to
fast-import when adding a large blob.
The write-out codepath in entry.c::write_entry() should be taught to
stream, instead of reading everything in core. This should not be so
hard to implement, especially if we limit ourselves only to loose
object files and non-delta representation in packfiles.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split out the case where we do not know the size of the input (hence we
read everything into a strbuf before doing anything) to index_pipe(), and
the other case where we mmap or read the whole data to index_bulk().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "format_check" parameter tucked after the existing parameters is too
ugly an afterthought to live in any reasonable API.
Combine it with the other boolean parameter "write_object" into a single
"flags" parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I found that some doubled words had snuck back into projects from which
I'd already removed them, so now there's a "syntax-check" makefile rule in
gnulib to help prevent recurrence.
Running the command below spotted a few in git, too:
git ls-files | xargs perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt])\s+\1\b/gims)' \
-e '{$n=($` =~ tr/\n/\n/ + 1); ($v=$&)=~s/\n/\\n/g;' \
-e 'print "$ARGV:$n:$v\n"}'
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-new-workdir script in contrib/ makes a new work tree by sharing
many subdirectories of the .git directory with the original repository.
When rerere.enabled is set in the original repository, but the user has
not encountered any conflicts yet, the original repository may not yet
have .git/rr-cache directory.
When rerere wants to run in a new work tree created from such a young
original repository, it fails to mkdir(2) .git/rr-cache that is a symlink
to a yet-to-be-created directory.
There are three possible approaches to this:
- A naive solution is not to create a symlink in the git-new-workdir
script to a directory the original does not have (yet). This is not a
solution, as we tend to lazily create subdirectories of .git/, and
having rerere.enabled configuration set is a strong indication that the
user _wants_ to have this lazy creation to happen;
- We could always create .git/rr-cache upon repository creation. This is
tempting but will not help people with existing repositories.
- Detect this case by seeing that mkdir(2) failed with EEXIST, checking
that the path is a symlink, and try running mkdir(2) on the link
target.
This patch solves the issue by doing the third one.
Strictly speaking, this is incomplete. It does not attempt to handle
relative symbolic link that points into the original repository, but this
is good enough to help people who use contrib/workdir/git-new-workdir
script.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the spirit of v1.5.0.2~21 (Check for PRIuMAX rather than
NO_C99_FORMAT in fast-import.c, 2007-02-20), use PRIuMAX from
git-compat-util.h on all platforms instead of C99-specific formats
like %zu with dangerous fallbacks to %u or %lu.
So now C99-challenged platforms can build git without provoking
warnings or errors from printf, even if pointers do not have the same
size as an int or long.
The need for a fallback PRIuMAX is detected in git-compat-util.h with
"#ifndef PRIuMAX". So while at it, simplify the Makefile and configure
script by eliminating the NO_C99_FORMAT knob altogether.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/maint-fd-limit:
sha1_file.c: Don't retain open fds on small packs
mingw: add minimum getrlimit() compatibility stub
Limit file descriptors used by packs
If a pack file is small enough that its entire contents fits within
one mmap window, mmap the file and then immediately close its file
descriptor. This reduces the number of file descriptors that are
needed to read from repositories with many tiny pack files, such
as one that has received 1000 pushes (and created 1000 small pack
files) since its last repack.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than using 'errno == EMFILE' after a failed open() call
to indicate the process is out of file descriptors and an LRU
pack window should be closed, place a hard upper limit on the
number of open packs based on the actual rlimit of the process.
By using a hard upper limit that is below the rlimit of the current
process it is not necessary to check for EMFILE on every single
fd-allocating system call. Instead reserving 25 file descriptors
makes it safe to assume the system call won't fail due to being over
the filedescriptor limit. Here 25 is chosen as a WAG, but considers
3 for stdin/stdout/stderr, and at least a few for other Git code
to operate on temporary files. An additional 20 is reserved as it
is not known what the C library needs to perform other services on
Git's behalf, such as nsswitch or name resolution.
This fixes a case where running `git gc --auto` in a repository
with more than 1024 packs (but an rlimit of 1024 open fds) fails
due to the temporary output file not being able to allocate a
file descriptor. The output file is opened by pack-objects after
object enumeration and delta compression are done, both of which
have already opened all of the packs and fully populated the file
descriptor table.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions such as hashcmp that expect a binary SHA-1 value take
parameters of type "unsigned char *" to avoid accepting a textual
SHA-1 passed by mistake. Unfortunately, this means passing the string
literal EMPTY_TREE_SHA1_BIN requires an ugly cast. Tweak the
definition of EMPTY_TREE_SHA1_BIN to produce a value of more
convenient type.
In the future the definition might change to
extern const unsigned char empty_tree_sha1_bin[20];
#define EMPTY_TREE_SHA1_BIN empty_tree_sha1_bin
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cached object store was added in d66b37b (Add pretend_sha1_file()
interface. - 2007-02-04) as a way to temporarily inject some objects
to object store.
But only read_sha1_file() knows about this store. While it will return
an object from this store, sha1_object_info() will happily say
"object not found".
Teach sha1_object_info() about the cached store for consistency.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits, trees and tags have structure. Don't let users feed git
with malformed ones. Sooner or later git will die() when
encountering them.
Note that this patch does not check semantics. A tree that points
to non-existent objects is perfectly OK (and should be so, users
may choose to add commit first, then its associated tree for example).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The errno check added in commit 3ba7a06 "A loose object is not corrupt
if it cannot be read due to EMFILE" only checked for whether errno is
not ENOENT and thus incorrectly treated "no error" as an error
condition.
Because of that, it never reached the code path that would report that
the object is corrupted and instead caused funny errors like:
fatal: failed to read object 333c4768ce595793fdab1ef3a036413e2a883853: Success
So we have to extend the check to cover the case in which the object
file was successfully read, but its contents are corrupted.
Reported-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/thinner-wrapper:
Remove pack file handling dependency from wrapper.o
pack-objects: mark file-local variable static
wrapper: give zlib wrappers their own translation unit
strbuf: move strbuf_branchname to sha1_name.c
path helpers: move git_mkstemp* to wrapper.c
wrapper: move odb_* to environment.c
wrapper: move xmmap() to sha1_file.c
As v1.7.0-rc0~43 (slim down "git show-index", 2010-01-21) explains,
use of xmalloc() brings in a dependency on zlib, the sha1 lib, and the
rest of git's object file access machinery via try_to_free_pack_memory.
That is overkill when xmalloc is just being used as a convenience
wrapper to exit when no memory is available.
So defer setting try_to_free_pack_memory as try_to_free_routine until
the first packfile is opened in add_packed_git().
After this change, a simple program using xmalloc() and no other
functions will not pull in any code from libgit.a aside from wrapper.o
and usage.o.
Improved-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wrapper.o depends on sha1_file.o for a number of reasons. One is
release_pack_memory().
xmmap function calls mmap, discarding unused pack windows when
necessary to relieve memory pressure. Simple git programs using
wrapper.o as a friendly libc do not need this functionality.
So move xmmap to sha1_file.o, where release_pack_memory() is.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When opening any files in the object database, release unused pack
windows if the open(2) syscall fails due to EMFILE (too many open
files in this process). This allows Git to degrade gracefully on
a repository with thousands of pack files, and a commit stored in
a loose object in the middle of the history.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This utility function avoids an unnecessary update of the access time
for a loose object file. Just as the atime isn't useful on a loose
object, its not useful on the pack or the corresonding idx file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fsck" bails out with a claim that a loose object that cannot be
read but exists on the filesystem to be corrupt, which is wrong when
read_object() failed due to e.g. EMFILE.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify the error reporting logic by moving the normal codepath (i.e. we
read the object we wanted to read correctly) up and return early.
The logic to report the name of the packfile with a corrupt object,
introduced by e8b15e6 (sha1_file: Show the the type and path to corrupt
objects, 2010-06-10), was totally bogus. The function that knows which
bad object came from what packfile is has_packed_and_bad(); make it report
which packfile the problem was found.
"Corrupt" is already an adjective, e.g. an object is "corrupt"; we do not
have to say "corrupted object".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the error message that's displayed when we encounter corrupt
objects to be more specific. We now print the type (loose or packed)
of corrupted objects, along with the full path to the file in
question.
Before:
$ git cat-file blob 909ef997367880aaf2133bafa1f1a71aa28e09df
fatal: object 909ef997367880aaf2133bafa1f1a71aa28e09df is corrupted
After:
$ git cat-file blob 909ef997367880aaf2133bafa1f1a71aa28e09df
fatal: loose object 909ef997367880aaf2133bafa1f1a71aa28e09df (stored in .git/objects/90/9ef997367880aaf2133bafa1f1a71aa28e09df) is corrupted
Knowing the path helps to quickly analyze what's wrong:
$ file .git/objects/90/9ef997367880aaf2133bafa1f1a71aa28e09df
.git/objects/90/9ef997367880aaf2133bafa1f1a71aa28e09df: empty
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes a sha1 and produces a loose object
filename. It caches the location of the object directory so
that it can fill the sha1 information directly without
allocating a new buffer (and in its original incarnation,
without calling getenv(), though these days we cache that
with the code in environment.c).
This cached base directory can become stale, however, if in
a single process git changes the location of the object
directory (e.g., by running setup_work_tree, which will
chdir to the new worktree).
In most cases this isn't a problem, because we tend to set
up the git repository location and do any chdir()s before
actually looking up any objects, so the first lookup will
cache the correct location. In the case of reset --hard,
however, we do something like:
1. look up the commit object
2. notice we are doing --hard, run setup_work_tree
3. look up the tree object to reset
Step (3) fails because our cache object directory value is
bogus.
This patch simply removes the caching. We use a static
buffer instead of allocating one each time (the original
version treated the malloc'd buffer as a static, so there is
no change in calling semantics).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/maint-dumb-http-pack-reidx:
http.c::new_http_pack_request: do away with the temp variable filename
http-fetch: Use temporary files for pack-*.idx until verified
http-fetch: Use index-pack rather than verify-pack to check packs
Allow parse_pack_index on temporary files
Extract verify_pack_index for reuse from verify_pack
Introduce close_pack_index to permit replacement
http.c: Remove unnecessary strdup of sha1_to_hex result
http.c: Don't store destination name in request structures
http.c: Drop useless != NULL test in finish_http_pack_request
http.c: Tiny refactoring of finish_http_pack_request
t5550-http-fetch: Use subshell for repository operations
http.c: Remove bad free of static block
* maint:
Documentation/gitdiffcore: fix order in pickaxe description
Documentation: fix minor inconsistency
Documentation: rebase -i ignores options passed to "git am"
hash_object: correction for zero length file
The check whether size is zero was done after if size <= SMALL_FILE_SIZE,
as result, zero size case was never triggered. Instead zero length file
was treated as any other small file. This did not caused any problem, but
if we have a special case for size equal to zero, it is better to make it
work and avoid redundant malloc().
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The easiest way to verify a pack index is to open it through the
standard parse_pack_index function, permitting the header check
to happen when the file is mapped. However, the dumb HTTP client
needs to verify a pack index before its moved into its proper file
name within the objects/pack directory, to prevent a corrupt index
from being made available. So permit the caller to specify the
exact path of the index file.
For now we're still using the final destination name within the
sole call site in http.c, but eventually we will start to parse
the temporary path instead.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By closing the pack index, a caller can later overwrite the index
with an updated index file, possibly after converting from v1 to
the v2 format. Because p->index_data is NULL after close, on the
next access the index will be opened again and the other members
will be updated with new data.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now, this has been part of the commit-tree builtin.
However, it is already used by other builtins (like commit,
merge, and notes), and it would be useful to access it from
library code.
The check_valid helper has to come along, too, but is given
a more library-ish name of "assert_sha1_type".
Otherwise, the code is unchanged. There are still a few
rough edges for a library function, like printing the utf8
warning to stderr, but we can address those if and when they
come up as inappropriate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These should take const buffers as input data, but zlib's
next_in pointer is not const-correct. Let's fix it at the
zlib level, though, so the cast happens in one obvious
place. This should be safe, as a similar cast is used in
zlib's example code for a const array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/mkstemps-mode-for-packfiles:
Use git_mkstemp_mode instead of plain mkstemp to create object files
git_mkstemps_mode: don't set errno to EINVAL on exit.
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
Move gitmkstemps to path.c
Add a testcase for ACL with restrictive umask.
* nd/root-git:
Add test for using Git at root of file system
Support working directory located at root
Move offset_1st_component() to path.c
init-db, rev-parse --git-dir: do not append redundant slash
make_absolute_path(): Do not append redundant slash
Conflicts:
setup.c
sha1_file.c
* mm/mkstemps-mode-for-packfiles:
Use git_mkstemp_mode instead of plain mkstemp to create object files
git_mkstemps_mode: don't set errno to EINVAL on exit.
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
Move gitmkstemps to path.c
Add a testcase for ACL with restrictive umask.
* np/compress-loose-object-memsave:
sha1_file: be paranoid when creating loose objects
sha1_file: don't malloc the whole compressed result when writing out objects
We used to unnecessarily give the read permission to group and others,
regardless of the umask, which isn't serious because the objects are
still protected by their containing directory, but isn't necessary
either.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't want the data being deflated and stored into loose objects
to be different from what we expect. While the deflated data is
protected by a CRC which is good enough for safe data retrieval
operations, we still want to be doubly sure that the source data used
at object creation time is still what we expected once that data has
been deflated and its CRC32 computed.
The most plausible data corruption may occur if the source file is
modified while Git is deflating and writing it out in a loose object.
Or Git itself could have a bug causing memory corruption. Or even bad
RAM could cause trouble. So it is best to make sure everything is
coherent and checksum protected from beginning to end.
To do so we compute the SHA1 of the data being deflated _after_ the
deflate operation has consumed that data, and make sure it matches
with the expected SHA1. This way we can rely on the CRC32 checked by
the inflate operation to provide a good indication that the data is still
coherent with its SHA1 hash. One pathological case we ignore is when
the data is modified before (or during) deflate call, but changed back
before it is hashed.
There is some overhead of course. Using 'git add' on a set of large files:
Before:
real 0m25.210s
user 0m23.783s
sys 0m1.408s
After:
real 0m26.537s
user 0m25.175s
sys 0m1.358s
The overhead is around 5% for full data coherency guarantee.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using read() instead of mmap() can be 39% speed up for 1Kb files and is
1% speed up 1Mb files. For larger files, it is better to use mmap(),
because the difference between is not significant, and when there is not
enough memory, mmap() performs much better, because it avoids swapping.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no real advantage to malloc the whole output buffer and
deflate the data in a single pass when writing loose objects. That is
like only 1% faster while using more memory, especially with large
files where memory usage is far more. It is best to deflate and write
the data out in small chunks reusing the same memory instead.
For example, using 'git add' on a few large files averaging 40 MB ...
Before:
21.45user 1.10system 0:22.57elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+828040outputs (0major+142640minor)pagefaults 0swaps
After:
21.50user 1.25system 0:22.76elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+828040outputs (0major+104408minor)pagefaults 0swaps
While the runtime stayed relatively the same, the number of minor page
faults went down significantly.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation is also lightly modified to use is_dir_sep()
instead of hardcoding '/'.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jc: later NUL termination by the caller becomes unnecessary]
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the documentation says, this is primarily for debugging, and
in the longer term we should rename it to test-show-index or something.
In the meantime, just avoid xmalloc (which slurps in the rest of git), and
separating out the trivial hex functions into "hex.o".
This results in
[torvalds@nehalem git]$ size git-show-index
text data bss dec hex filename
222818 2276 112688 337782 52776 git-show-index (before)
5696 624 1264 7584 1da0 git-show-index (after)
which is a whole lot better.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loop in get_size_from_delta() feeds a deflated delta data from the
pack stream _until_ we get inflated result of 20 bytes[*] or we reach the
end of stream.
Side note. This magic number 20 does not have anything to do with the
size of the hash we use, but comes from 1a3b55c (reduce delta head
inflated size, 2006-10-18).
The loop reads like this:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while ((st == Z_OK || st == Z_BUF_ERROR) &&
stream.total_out < sizeof(delta_head));
This git_inflate() can return:
- Z_STREAM_END, if use_pack() fed it enough input and the delta itself
was smaller than 20 bytes;
- Z_OK, when some progress has been made;
- Z_BUF_ERROR, if no progress is possible, because we either ran out of
input (due to corrupt pack), or we ran out of output before we saw the
end of the stream.
The fix b3118bd (sha1_file: Fix infinite loop when pack is corrupted,
2009-10-14) attempted was against a corruption that appears to be a valid
stream that produces a result larger than the output buffer, but we are
not even trying to read the stream to the end in this loop. If avail_out
becomes zero, total_out will be the same as sizeof(delta_head) so the loop
will terminate without the "fix". There is no fix from b3118bd needed for
this loop, in other words.
The loop in unpack_compressed_entry() is quite a different story. It
feeds a deflated stream (either delta or base) and allows the stream to
produce output up to what we expect but no more.
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
This _does_ risk falling into an endless interation, as we can exhaust
avail_out if the length we expect is smaller than what the stream wants to
produce (due to pack corruption). In such a case, avail_out will become
zero and inflate() will return Z_BUF_ERROR, while avail_in may (or may
not) be zero.
But this is not a right fix:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
+ if (st == Z_BUF_ERROR && (stream.avail_in || !stream.avail_out)
+ break; /* wants more input??? */
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
as Z_BUF_ERROR from inflate() may be telling us that avail_in has also run
out before reading the end of stream marker. In such a case, both avail_in
and avail_out would be zero, and the loop should iterate to allow the end
of stream marker to be seen by inflate from the input stream.
The right fix for this loop is likely to be to increment the initial
avail_out by one (we allocate one extra byte to terminate it with NUL
anyway, so there is no risk to overrun the buffer), and break out if we
see that avail_out has become zero, in order to detect that the stream
wants to produce more than what we expect. After the loop, we have a
check that exactly tests this condition:
if ((st != Z_STREAM_END) || stream.total_out != size) {
free(buffer);
return NULL;
}
So here is a patch (without my previous botched attempts) to fix this
issue. The first hunk reverts the corresponding hunk from b3118bd, and
the second hunk is the same fix proposed earlier.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some types of corruption to a pack may confuse the deflate stream
which stores an object. In Andy's reported case a 36 byte region
of the pack was overwritten, leading to what appeared to be a valid
deflate stream that was trying to produce a result larger than our
allocated output buffer could accept.
Z_BUF_ERROR is returned from inflate() if either the input buffer
needs more input bytes, or the output buffer has run out of space.
Previously we only considered the former case, as it meant we needed
to move the stream's input buffer to the next window in the pack.
We now abort the loop if inflate() returns Z_BUF_ERROR without
consuming the entire input buffer it was given, or has filled
the entire output buffer but has not yet returned Z_STREAM_END.
Either state is a clear indicator that this loop is not working
as expected, and should not continue.
This problem cannot occur with loose objects as we open the entire
loose object as a single buffer and treat Z_BUF_ERROR as an error.
Reported-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
* tr/die_errno:
Use die_errno() instead of die() when checking syscalls
Convert existing die(..., strerror(errno)) to die_errno()
die_errno(): double % in strerror() output just in case
Introduce die_errno() that appends strerror(errno) to die()
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shifting 'unsigned char' or 'unsigned short' left can result in sign
extension errors, since the C integer promotion rules means that the
unsigned char/short will get implicitly promoted to a signed 'int' due to
the shift (or due to other operations).
This normally doesn't matter, but if you shift things up sufficiently, it
will now set the sign bit in 'int', and a subsequent cast to a bigger type
(eg 'long' or 'unsigned long') will now sign-extend the value despite the
original expression being unsigned.
One example of this would be something like
unsigned long size;
unsigned char c;
size += c << 24;
where despite all the variables being unsigned, 'c << 24' ends up being a
signed entity, and will get sign-extended when then doing the addition in
an 'unsigned long' type.
Since git uses 'unsigned char' pointers extensively, we actually have this
bug in a couple of places.
I may have missed some, but this is the result of looking at
git grep '[^0-9 ][ ]*<<[ ][a-z]' -- '*.c' '*.h'
git grep '<<[ ]*24'
which catches at least the common byte cases (shifting variables by a
variable amount, and shifting by 24 bits).
I also grepped for just 'unsigned char' variables in general, and
converted the ones that most obviously ended up getting implicitly cast
immediately anyway (eg hash_name(), encode_85()).
In addition to just avoiding 'unsigned char', this patch also tries to use
a common idiom for the delta header size thing. We had three different
variations on it: "& 0x7fUL" in one place (getting the sign extension
right), and "& ~0x80" and "& 0x7f" in two other places (not getting it
right). Apart from making them all just avoid using "unsigned char" at
all, I also unified them to then use a simple "& 0x7f".
I considered making a sparse extension which warns about doing implicit
casts from unsigned types to signed types, but it gets rather complex very
quickly, so this is just a hack.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new function will replace "read_sha1_file". This latter function
becoming just a stub to call the former will a NULL "replacement"
argument.
This new function is needed because sometimes we need to use the
replacement sha1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code implementing this mechanism has been copied more-or-less
from the commit graft code.
This mechanism is used in "read_sha1_file". sha1 passed to this
function that match a ref name in "refs/replace/" are replaced by
the sha1 that has been read in the ref.
We "die" if the replacement recursion depth is too high or if we
can't read the replacement object.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/unlink-err:
print unlink(2) errno in copy_or_link_directory
replace direct calls to unlink(2) with unlink_or_warn
Introduce an unlink(2) wrapper which gives warning if unlink failed
* maint:
grep: fix word-regexp colouring
completion: use git rev-parse to detect bare repos
Cope better with a _lot_ of packs
for-each-ref: fix segfault in copy_email
You might end up with a situation where you have tons of pack files, e.g.
when using hg2git. In this situation, all kinds of operations may
end up with a "too many files open" error. Let's recover gracefully from
that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Looks-right-to-me-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/unlink-err:
print unlink(2) errno in copy_or_link_directory
replace direct calls to unlink(2) with unlink_or_warn
Introduce an unlink(2) wrapper which gives warning if unlink failed
Essentially; s/type* /type */ as per the coding guidelines.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps to notice when something's going wrong, especially on
systems which lock open files.
I used the following criteria when selecting the code for replacement:
- it was already printing a warning for the unlink failures
- it is in a function which already printing something or is
called from such a function
- it is in a static function, returning void and the function is only
called from a builtin main function (cmd_)
- it is in a function which handles emergency exit (signal handlers)
- it is in a function which is obvously cleaning up the lockfiles
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Unreliable hardlinks" is a misleading description for what is happening.
So rename it to something less misleading.
Suggested by Linus Torvalds.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that accessing NTFS partitions with ufsd (at least on my EeePC)
has an unnerving bug: if you link() a file and unlink() it right away,
the target of the link() will have the correct size, but consist of NULs.
It seems as if the calls are simply not serialized correctly, as single-stepping
through the function move_temp_to_file() works flawlessly.
As ufsd is "Commertial software" (sic!), I cannot fix it, and have to work
around it in Git.
At the same time, it seems that this fixes msysGit issues 222 and 229 to
assume that Windows cannot handle link() && unlink().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/shared-literally:
t1301: loosen test for forced modes
set_shared_perm(): sometimes we know what the final mode bits should look like
move_temp_to_file(): do not forget to chmod() in "Coda hack" codepath
Move chmod(foo, 0444) into move_temp_to_file()
"core.sharedrepository = 0mode" should set, not loosen
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
Conflicts:
t/t7700-repack.sh
adjust_shared_perm() first obtains the mode bits from lstat(2), expecting
to find what the result of applying user's umask is, and then tweaks it
as necessary. When the file to be adjusted is created with mkstemp(3),
however, the mode thusly obtained does not have anything to do with user's
umask, and we would need to start from 0444 in such a case and there is no
point running lstat(2) for such a path.
This introduces a new API set_shared_perm() to bypass the lstat(2) and
instead force setting the mode bits to the desired value directly.
adjust_shared_perm() becomes a thin wrapper to the function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now move_temp_to_file() is responsible for doing everything that is
necessary to turn a tempfile in $GIT_DIR into its final form, it must make
sure "Coda hack" codepath correctly makes the file read-only.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing out a loose object or a pack (index), move_temp_to_file() is
called to finalize the resulting file. These files (loose files and packs)
should all have permission mode 0444 (modulo adjust_shared_perm()).
Therefore, instead of doing chmod(foo, 0444) explicitly from each callsite
(or even forgetting to chmod() at all), do the chmod() call from within
move_temp_to_file().
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the behaviour of octal notation to how it is defined in the
documentation, while keeping the traditional "loosen only" semantics
intact for "group" and "everybody".
Three main points of this patch are:
- For an explicit octal notation, the internal shared_repository variable
is set to a negative value, so that we can tell "group" (which is to
"OR" in 0660) and 0660 (which is to "SET" to 0660);
- git-init did not set shared_repository variable early enough to affect
the initial creation of many files, notably copied templates and the
configuration. We set it very early when a command-line option
specifies a custom value.
- Many codepaths create files inside $GIT_DIR by various ways that all
involve mkstemp(), and then call move_temp_to_file() to rename it to
its final destination. We can add adjust_shared_perm() call here; for
the traditional "loosen-only", this would be a no-op for many codepaths
because the mode is already loose enough, but with the new behaviour it
makes a difference.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Increase the size of the die/warning buffer to avoid truncation
close_sha1_file(): make it easier to diagnose errors
avoid possible overflow in delta size filtering computation
A bug report with "unable to write sha1 file" made us realize that we do
not have enough information to guess why close() is failing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option to pack-objects/rev-list was created to improve the -A and -a
options of repack. It was found to be lacking in that it did not provide
the ability to differentiate between local and non-local kept packs, and
found to be unnecessary since objects residing in local kept packs can be
filtered out by the --honor-pack-keep option.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-1.6.0-keep-pack:
is_kept_pack(): final clean-up
Simplify is_kept_pack()
Consolidate ignore_packed logic more
has_sha1_kept_pack(): take "struct rev_info"
has_sha1_pack(): refactor "pretend these packs do not exist" interface
git-repack: resist stray environment variable
Now is_kept_pack() is just a member lookup into a structure, we can write
it as such.
Also rewrite the sole caller of has_sha1_kept_pack() to switch on the
criteria the callee uses (namely, revs->kept_pack_only) between calling
has_sha1_kept_pack() and has_sha1_pack(), so that these two callees do not
have to take a pointer to struct rev_info as an argument.
This removes the header file dependency issue temporarily introduced by
the earlier commit, so we revert changes associated to that as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes --unpacked=<packfile> parameter from the revision parser, and
rewrites its use in git-repack to pass a single --kept-pack-only option
instead.
The new --kept-pack-only option means just that. When this option is
given, is_kept_pack() that used to say "not on the --unpacked=<packfile>
list" now says "the packfile has corresponding .keep file".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors three loops that check if a given packfile is on the
ignore_packed list into a function is_kept_pack(). The function returns
false for a pack on the list, and true for a pack not on the list, because
this list is solely used by "git repack" to pass list of packfiles that do
not have corresponding .keep files, i.e. a packfile not on the list is
"kept".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its "ignore_packed" parameter always comes from struct rev_info. This
patch makes the function take a pointer to the surrounding structure, so
that the refactoring in the next patch becomes easier to review.
There is an unfortunate header file dependency and the easiest workaround
is to temporarily move the function declaration from cache.h to
revision.h; this will be moved back to cache.h once the function loses
this "ignore_packed" parameter altogether in the later part of the
series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the callers of this function except only one pass NULL to its last
parameter, ignore_packed.
Introduce has_sha1_kept_pack() function that has the function signature
and the semantics of this function, and convert the sole caller that does
not pass NULL to call this new function.
All other callers and has_sha1_pack() lose the ignore_packed parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare for 1.6.1.4.
Make repack less likely to corrupt repository
fast-export: ensure we traverse commits in topological order
Clear the delta base cache if a pack is rebuilt
Conflicts:
RelNotes
* maint-1.6.0:
Make repack less likely to corrupt repository
fast-export: ensure we traverse commits in topological order
Clear the delta base cache if a pack is rebuilt
There is some risk that re-opening a regenerated pack file with
different offsets could leave stale entries within the delta base
cache that could be matched up against other objects using the same
"struct packed_git*" and pack offset.
Throwing away the entire delta base cache in this case is safer,
as we don't have to worry about a recycled "struct packed_git*"
matching to the wrong base object, resulting in delta apply
errors while unpacking an object.
Suggested-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we may reuse the same memory address for a totally
different "struct packed_git", and a previously cached object from
the prior occupant might be returned when trying to unpack an object
from the new pack.
Found-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The size of the content we are adding may be larger than
2.1G (i.e., "git add gigantic-file"). Most of the code-path
to do so uses size_t or unsigned long to record the size,
but write_loose_object uses a signed int.
On platforms where "int" is 32-bits (which includes x86_64
Linux platforms), we end up passing malloc a negative size.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is only used from "sha1_file.c".
And as we want to add a "replace_object" hook in "read_sha1_file",
we must not let people bypass the hook using something other than
"read_sha1_file".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
R. Tyler Ballance reported a mysterious transient repository corruption;
after much digging, it turns out that we were not catching and reporting
memory allocation errors from some calls we make to zlib.
This one _just_ wraps things; it doesn't do the "retry on low memory
error" part, at least not yet. It is an independent issue from the
reporting. Some of the errors are expected and passed back to the caller,
but we die when zlib reports it failed to allocate memory for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes us able to properly index symlinks even on filesystems where
st_size doesn't match the true size of the link.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Especially on Windows where an opened file cannot be replaced, make
sure pack-objects always close packs it is about to replace. Even on
non Windows systems, this could save potential bad results if ever
objects were to be read from the new pack file using offset from the old
index.
This should fix t5303 on Windows.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Tested-by: Johannes Sixt <j6t@kdbg.org> (MinGW)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-keep-pack:
repack: only unpack-unreachable if we are deleting redundant packs
t7700: test that 'repack -a' packs alternate packed objects
pack-objects: extend --local to mean ignore non-local loose objects too
sha1_file.c: split has_loose_object() into local and non-local counterparts
t7700: demonstrate mishandling of loose objects in an alternate ODB
builtin-gc.c: use new pack_keep bitfield to detect .keep file existence
repack: do not fall back to incremental repacking with [-a|-A]
repack: don't repack local objects in packs with .keep file
pack-objects: new option --honor-pack-keep
packed_git: convert pack_local flag into a bitfield and add pack_keep
t7700: demonstrate mishandling of objects in packs with a .keep file
Johan Herland
Christian Couder
Vicent Marti
Jonathan Nieder
Junio C Hamano
Nguyễn Thái Ngọc Duy
Jeff King
Brandon Casey
Ramsay Jones
Thomas Rast
Felipe Contreras
Thomas Rast
Steven Walter
Michael Haggerty
Joachim Schmitz
Heiko Voigt
Pete Wyckoff
Matthieu Moy
Ævar Arnfjörð Bjarmason
Ramkumar Ramachandra
Hui Wang
Roberto Tyley
Jim Meyering
Shawn O. Pearce
Björn Steinbrink
Dmitry Potapov
Nicolas Pitre
Ilari Liusvaara
Linus Torvalds
Pierre Habouzit
Johannes Schindelin
Alex Riesen
Brandon Casey
Nicolas Pitre