Include the gitweb/Makefile in the top-level Makefile rather than
calling it as a sub-Makefile. As noted in the thread starting at at
[1] (in particular [2]) we'll pay a high cost on NOOP runs of "make"
just to figure out that we have nothing to do for "make gitweb".
The "gitweb" script also isn't maintained out-of-tree, unlike
"gitk-git" or "git-gui", which both have their own "Makefile". Other
parts of it are already integrated into our main Makefiles, e.g. the
documentation is built by Documentation/Makefile since
07ea4df278 (gitweb: Add gitweb(1) manpage for gitweb itself,
2011-10-16).
1. https://lore.kernel.org/git/20220525205651.825669-1-szeder.dev@gmail.com/
2. https://lore.kernel.org/git/220526.86k0a96sv2.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the special "test" targets for gitweb added in
958a846721 (gitweb/Makefile: Add 'test' and 'test-installed' targets,
2010-09-26). Unlike e.g. "contrib/scalar" and "contrib/subtree" the
"gitweb" tests themselves live in our top-level t/ directory.
It therefore doesn't make sense to maintain this indirection, no more
than it would to have a "git-send-email-test". By dropping it we'll
also free other tests to use the t95*.sh prefix.
These removed targets are unlikely to be used by anyone, and to the
extent that they are we can easily use an invocation like this
instead:
make test T='t[0-9]*gitweb*.sh'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the "gitweb/Makefile" was split out from the top-level Makefile
in 62331ef163 (gitweb: Makefile improvements, 2010-01-30) we've kept
the inter-dependencies between the two, and worse have dealt with a
lot of duplication as a result.
In preparation for merging the two again add a MAK_DIR_GITWEB variable
to various rules in it. This will allow us to set this variable to
"gitweb/" as we include it in the top-level Makefile, which will
minimize the size of the subsequent diff.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the variable definitions for the $(GITWEB_CSS) and $(GITWEB_JS)
so that we have a clear separation between what we use as "in" files,
v.s. our "min" files. We can now make the appending to $(GITWEB_FILES)
unconditional, since $(GITWEB_{JS,CSS}) is either the "min" or
non-"min" version. This reduces the duplication within the file.
While we're at it let's initialize "GITWEB_JSLIB_FILES" as we normally
do with such variables.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Declare the targets that the "all" target depends on with a new
$(GITWEB_ALL) variable. This will help to reduce churn in subsequent
commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the '.PHONY' definition so that it's split up and accompanies the
relevant as they're defined. This will make a subsequent diff smaller
as we'll remove some of these, and won't need to re-edit the
now-removed '.PHONY' line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "say" function, with various rewrites of the remaining
git-*.sh code to C and the preceding change to have git-submodule.sh
stop using the GIT_QUIET variable there were only four uses in
git-subtree.sh. Let's have it use an "arg_quiet" variable instead, and
move the "say" function over to it.
The only other use was a trivial message in git-instaweb.sh, since it
has never supported the --quiet option (or similar) that code added in
0b624b4cee (instaweb: restart server if already running, 2009-11-22)
can simply use "echo" instead.
The remaining in-tree hits from "say" are all for the sibling function
defined in t/test-lib.sh. It's safe to remove this function since it
has never been documented in Documentation/git-sh-setup.txt.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the use of the "$GIT_QUIET" variable in favor of our own
"$quiet", ever since b3c5f5cb04 (submodule: move core cmd_update()
logic to C, 2022-03-15) we have not used the "say" function in
git-sh-setup.sh, which is the only thing that's affected by using
"GIT_QUIET".
We still want to support --quiet for our own use though, but let's use
our own variable for that. Now it's obvious that we only care about
passing "--quiet" to "git submodule--helper", and not to change the
output of any "say" invocation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow-up on the preceding commit which taught "git submodule--helper
update" to understand "--merge", "--checkout" and "--rebase" and use
those options instead of "--update=(rebase|merge|checkout|none)" when
the command invokes itself.
Unlike the preceding change this isn't strictly necessary to
eventually change "git-submodule.sh" so that it invokes "git
submodule--helper update" directly, but let's remove this
inconsistency in the command-line interface. We shouldn't need to
carry special synonyms for existing options in "git submodule--helper"
when that command can use the primary documented names instead.
But, as seen in the post-image this makes the control flow within
"builtin/submodule--helper.c" simpler, we can now write directly to
the "update_default" member of "struct update_data" when parsing the
options in "module_update()".
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Understand --checkout, --merge and --rebase synonyms for
--update={checkout,merge,rebase}, as well as the short options that
'git submodule' itself understands.
This removes a difference between the CLI API of "git submodule" and
"git submodule--helper", making it easier to make the latter an alias
for the former. See 48308681b0 (git submodule update: have a
dedicated helper for cloning, 2016-02-29) for the initial addition of
--update.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the user-facing "git submodule--helper" commands so that
they'll report their name as being "git submodule". To a user these
commands are internal implementation details, and it doesn't make
sense to emit usage about an internal helper when "git submodule" is
invoked with invalid options.
Before this we'd emit e.g.:
$ git submodule absorbgitdirs --blah
error: unknown option `blah'
usage: git submodule--helper absorbgitdirs [<options>] [<path>...]
[...]
And:
$ git submodule set-url -- --
usage: git submodule--helper set-url [--quiet] <path> <newurl>
[...]
Now we'll start with "usage: git submodule [...]" in both of those
cases. This change does not alter the "list", "name", "clone",
"config" and "create-branch" commands, those are internal-only (as an
aside; their usage info should probably invoke BUG(...)). This only
changes the user-facing commands.
The "status", "deinit" and "update" commands are not included in this
change, because their usage information already used "submodule"
rather than "submodule--helper".
I don't think it's currently possible to emit some of this usage
information in practice, as git-submodule.sh will catch unknown
options, and e.g. it doesn't seem to be possible to get "add" to emit
its usage information from "submodule--helper".
Though that change may be superfluous now, it's also harmless, and
will allow us to eventually dispatch further into "git
submodule--helper" from git-submodule.sh, while emitting the correct
usage output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "absorb-git-dirs" subcommand to "absorbgitdirs", which is
what the "git submodule" command itself has called it since the
subcommand was implemented in f6f8586140 (submodule: add
absorb-git-dir function, 2016-12-12).
Having these two be different will make it more tedious to dispatch to
eventually dispatch "git submodule--helper" directly, as we'd need to
retain this name mapping. So let's get rid of this needless
inconsistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e84c3cf3dc (git-submodule.sh: accept verbose flag in cmd_update to
be non-quiet, 2018-08-14) the "git submodule update" sub-command was
made to understand "-v", but the option was never documented.
The only in-tree user has been this test added in
3ad0401e9e (submodule update: silence underlying merge/rebase with
"--quiet", 2020-09-30), it wasn't per-se testing --quiet, but fixing a
bug in e84c3cf3dc3: It used to set "GIT_QUIET=0" instead of unsetting
it on "-v", and thus we'd end up passing "--quiet" to "git
submodule--helper" on "-v", since the "--quiet" option was passed
using the ${parameter:+word} construct.
Furthermore, even if someone had used the "-v" option they'd only be
getting the default output. Our default in both git-submodule.sh and
"git submodule--helper" has been to be "verbose", so the only way this
option could have matter is if it were used as e.g.:
git submodule --quiet update -v [...]
I.e. to undo the effect of a previous "--quiet" on the command-line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust code added in 0060fd1511 (clone --recurse-submodules: prevent
name squatting on Windows, 2019-09-12) to have the internal
--require-init option imply --init, rather than having
"git-submodule.sh" add it implicitly.
This change doesn't make any difference now, but eliminates another
special-case where "git submodule--helper update"'s behavior was
different from "git submodule update". This will make it easier to
eventually replace the cmd_update() function in git-submodule.sh.
We'll still need to keep the distinction between "--init" and
"--require-init" in git-submodule.sh. Once cmd_update() gets
re-implemented in C we'll be able to change variables and other code
related to that, but not yet.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 5c08dbbdf1 (git-submodule: fix subcommand parser, 2008-01-15) the
"--branch" option was supported as an option to "git submodule"
itself, i.e. "git submodule --branch" as a side-effect of its
implementation.
Then in b57e8119e6 (submodule: teach set-branch subcommand,
2019-02-08) when the "set-branch" subcommand was added the assertion
that we shouldn't have "--branch" anywhere except as an argument to
"add" and "set-branch" was copy/pasted from the adjacent check for
"--cache" added (or rather modified) in 496eeeb19b (git-submodule.sh:
avoid "test <cond> -a/-o <cond>", 2014-06-10).
But there's been a logic error in that check, which at a glance looked
like it should be supporting:
git submodule --branch <branch> (add | set-branch) [<options>]
But due to "||" in the condition (as opposed to "&&" for "--cache") if
we have "--branch" here already we'll emit usage, even for "add" and
"set-branch".
So in addition to never having documented this form, it hasn't worked
since b57e8119e6 was released with v2.22.0.
So it's safe to remove this code. I.e. we don't want to support the
form noted above, but only:
git submodule (add | set-branch) --branch <branch> [<options>]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the assignment of "$1" to the "$cached" variable. As seen in
the initial implementation in 70c7ac22de (Add git-submodule command,
2007-05-26) we only need to keep track of if we've seen the --cached
option, not save the "--cached" string for later use.
In 28f9af5d25 (git-submodule summary: code framework, 2008-03-11)
"$1" was assigned to it, but since there was no reason to do so let's
stop doing it. This trivial change will make it easier to reason about
an eventual change that'll remove the cmd_summary() function in favor
of dispatching to "git submodule--helper summary" directly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the $prefix variable which isn't used anymore, and hasn't been
since b3c5f5cb04 (submodule: move core cmd_update() logic to C,
2022-03-15).
Before that we'd use it to invoke "git submodule--helper" with the
"--recursive-prefix" option, but since b3c5f5cb04 that "git
submodule--helper" option is only used when it invokes itself.
So the "--recursive-prefix" option is still in use, but at this point
only when the helper invokes itself during submodule recursion. See
the "--recursive-prefix" option added in
c51f8f94e5 (submodule--helper: run update procedures from C,
2021-08-24).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sanitize_submodule_env() function was last used before
b3c5f5cb04 (submodule: move core cmd_update() logic to C,
2022-03-15), let's remove it.
This also allows us to remove clear_local_git_env() from
git-sh-setup.sh. That function hasn't been documented in
Documentation/git-sh-setup.sh, and since 14111fc492 (git: submodule
honor -c credential.* from command line, 2016-02-29) it had only been
used in the sanitize_submodule_env() function being removed here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The contrib/vscode/init.sh script initializes the .vscode directory with
some helpful metadata so VS Code handles Git code better.
One big issue that VS Code has is detecting the tab width based on file
type. ".txt" files were not covered by this script before, so add them
with the appropriate tab widths. This prevents inserting spaces instead
of tabs and keeps the tab width to eight instead of four or two.
While we are here, remove the "editor.wordWrap" settings. The editor's
word wrap is only cosmetic: it does not actually insert newlines when
your typing goes over the column limit. This can make it appear like you
have properly wrapped code, but it is incorrect. Further, existing code
that is over the column limit is wrapped even if your editor window is
wider than the limit. This can make reading such code more difficult.
Without these lines, VS Code renders the lines accurately, without
"ghost" newlines.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
43966ab315 (revert: optionally refer to commit in the "reference"
format, 2022-05-26) added the documentation file config/revert.txt.
Actually include it in config.txt.
Make is used with a bare infinitive after the object; remove the "to".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Run msgmerge with --no-location to drop file locations to decrease the
size of future patches. Also removed old translations.
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Commit 7281c196b1 (transfer doc: move fetch.credentialsInUrl to
"transfer" config namespace, 2022-06-15) propagates a typo from
6dcbdc0d66 (remote: create fetch.credentialsInUrl config, 2022-06-06),
where "other" is misspelled as "oher". Fix the typo accordingly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation explained the conversion from remote branch path to
local tracking ref path for @{push}, but not for @{upstream}.
Add the explanation to @{upstream}, and reference it in @{push} to avoid
undue repetition.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.35:
Git 2.35.4
Git 2.34.4
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.34:
Git 2.34.4
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.33:
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.32:
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.31:
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.30:
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
8959555cee (setup_git_directory(): add an owner check for the top-level
directory, 2022-03-02), adds a function to check for ownership of
repositories using a directory that is representative of it, and ways to
add exempt a specific repository from said check if needed, but that
check didn't account for owership of the gitdir, or (when used) the
gitfile that points to that gitdir.
An attacker could create a git repository in a directory that they can
write into but that is owned by the victim to work around the fix that
was introduced with CVE-2022-24765 to potentially run code as the
victim.
An example that could result in privilege escalation to root in *NIX would
be to set a repository in a shared tmp directory by doing (for example):
$ git -C /tmp init
To avoid that, extend the ensure_valid_ownership function to be able to
check for all three paths.
This will have the side effect of tripling the number of stat() calls
when a repository is detected, but the effect is expected to be likely
minimal, as it is done only once during the directory walk in which Git
looks for a repository.
Additionally make sure to resolve the gitfile (if one was used) to find
the relevant gitdir for checking.
While at it change the message printed on failure so it is clear we are
referring to the repository by its worktree (or gitdir if it is bare) and
not to a specific directory.
Helped-by: Junio C Hamano <junio@pobox.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Ævar Arnfjörð Bjarmason
Glen Choo
Derrick Stolee
Junio C Hamano
René Scharfe
Peter Krefting
Dimitriy Ryazantcev
Jiang Xin
Yi-Jyun Pan
Tran Ngoc Quan
Jean-Noël Avila
Jordi Mas
Taylor Blau
Tao Klerks
Johannes Schindelin
Carlo Marcelo Arenas Belón