Abandoning an already applied change in "git rebase -i" with
"--continue" left CHERRY_PICK_HEAD and confused later steps.
* js/rebase-i-clean-up-upon-continue-to-skip:
rebase -i: do not leave a CHERRY_PICK_HEAD file behind
t3404: demonstrate CHERRY_PICK_HEAD bug
When skipping commits whose changes were already applied via `git rebase
--continue`, we need to clean up said file explicitly.
The same is not true for `git rebase --skip` because that will execute
`git reset --hard` as part of the "skip" handling in git-rebase.sh, even
before git-rebase--interactive.sh is called.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rev-list's --cherry option does not detect that a patch has already
been applied upstream, an interactive rebase would offer to reapply it and
consequently stop at that patch with a failure, mentioning that the diff
is empty.
Traditionally, a `git rebase --continue` simply skips the commit in such a
situation.
However, as pointed out by Gábor Szeder, this leaves a CHERRY_PICK_HEAD
behind, making the Git prompt believe that a cherry pick is still going
on. This commit adds a test case demonstrating this bug.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" moved the "current" command from "todo" to "done" a
bit too prematurely, losing a step when a "pick" did not even start.
* ph/rebase-i-redo:
rebase -i: redo tasks that die during cherry-pick
When rebase--interactive processes a task, it removes the item from
the todo list and appends it to another list of executed tasks. If a
pick (this includes squash and fixup) fails before the index has
recorded the changes, take the corresponding item and put it on the todo
list again. Otherwise, the changes introduced by the scheduled commit
would be lost.
That kind of decision is possible since the cherry-pick command
signals why it failed to apply the changes of the given commit. Either
the changes are recorded in the index using a conflict (return value 1)
and rebase does not continue until they are resolved or the changes
are not recorded in the index (return value neither 0 nor 1) and
rebase has to try again with the same task.
Add a test cases for regression testing to the "rebase-interactive"
test suite.
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Signed-off-by: Phil Hord <hordp@cisco.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" recently started to include the number of
commits in the insn sheet to be processed, but on a platform
that prepends leading whitespaces to "wc -l" output, the numbers
are shown with extra whitespaces that aren't necessary.
* es/rebase-i-count-todo:
rebase-interactive: re-word "item count" comment
rebase-interactive: suppress whitespace preceding item count
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are tests which are missing a link in their &&-chain,
but in a way that probably does not effect the outcome of
the test. Most of these are of the form:
some_cmd >actual
test_cmp expect actual
The main point of the test is to verify the output, and a
failure in some_cmd would probably be noticed by bogus
output. But it is good for the tests to also confirm that
"some_cmd" does not die unexpectedly after producing its
output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" recently started to include the number of
commits in the insn sheet to be processed, but on a platform
that prepends leading whitespaces to "wc -l" output, the numbers
are shown with extra whitespaces that aren't necessary.
* es/rebase-i-count-todo:
rebase-interactive: re-word "item count" comment
rebase-interactive: suppress whitespace preceding item count
97f05f43 (Show number of TODO items for interactive rebase, 2014-12-10)
taught rebase-interactive to compute an item count with 'wc -l' and
display it in the instruction list comments:
# Rebase 46640c6..5568fd5 onto 46640c6 (4 TODO item(s))
On Mac OS X, however, it renders as:
# Rebase 46640c6..5568fd5 onto 46640c6 ( 4 TODO item(s))
since 'wc -l' indents its output with leading spaces. Fix this.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In earlier days, the abbreviated commit object name shown to the end
users were generated with hardcoded --abbrev=7; 56895038 (rebase
-i: respect core.abbrev, 2013-09-28) tried to make it honor the user
specified core.abbrev, but it missed the very initial invocation of
the editor.
These days, we try to use the full 40-hex object names internally to
avoid ambiguity that can arise after rebase starts running. Newly
created objects during the rebase may share the same prefix with
existing commits listed in the insn sheet. These object names are
shortened just before invoking the sequence editor to present the
insn sheet to the end user, and then expanded back to full object
names when the editor returns.
But the code still used the shortened names when preparing the insn
sheet for the very first time, resulting "7 hexdigits or more"
output to the user. Change the code to use full 40-hex commit
object names from the very beginning to make things more uniform.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's some special code in rebase -i to deal
with --keep-empty.
Add test for this combination.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ordinarily, we would say "VAR=VAL command" to execute a tested
command with environment variable(s) set only for that command.
This however does not work if 'command' is a shell function (most
notably 'test_must_fail'); the result of the assignment is retained
and affects later commands.
To avoid this, we used to assign and export environment variables
and run such a test in a subshell, like so:
(
VAR=VAL && export VAR &&
test_must_fail git command to be tested
)
But with "env" utility, we should be able to say:
test_must_fail env VAR=VAL git command to be tested
which is much shorter and easier to read.
Signed-off-by: David Tran <unsignedzero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit object names in the insn sheet that was prepared at the
beginning of "rebase -i" session can become ambiguous as the
rebasing progresses and the repository gains more commits. Make
sure the internal record is kept with full 40-hex object names.
* es/rebase-i-no-abbrev:
rebase -i: fix short SHA-1 collision
t3404: rebase -i: demonstrate short SHA-1 collision
t3404: make tests more self-contained
The 'todo' sheet for interactive rebase shows abbreviated SHA-1's and
then performs its operations upon those shortened values. This can lead
to an abort if the SHA-1 of a reworded or edited commit is no longer
unique within the abbreviated SHA-1 space and a subsequent SHA-1 in the
todo list has the same abbreviated value.
For example:
edit f00dfad first
pick badbeef second
If, after editing, the new SHA-1 of "first" also has prefix badbeef,
then the subsequent 'pick badbeef second' will fail since badbeef is no
longer a unique SHA-1 abbreviation:
error: short SHA1 badbeef is ambiguous.
fatal: Needed a single revision
Invalid commit name: badbeef
Fix this problem by expanding the SHA-1's in the todo list before
performing the operations.
[es: also collapse & expand SHA-1's for --edit-todo; respect
core.commentchar in transform_todo_ids(); compose commit message]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'todo' sheet for interactive rebase shows abbreviated SHA-1's and
then performs its operations upon those shortened values. This can lead
to an abort if the SHA-1 of a reworded or edited commit is no longer
unique within the abbreviated SHA-1 space and a subsequent SHA-1 in the
todo list has the same abbreviated value.
For example:
edit f00dfad first
pick badbeef second
If, after editing, the new SHA-1 of "first" also has prefix badbeef,
then the subsequent 'pick badbeef second' will fail since badbeef is no
longer a unique SHA-1 abbreviation:
error: short SHA1 badbeef is ambiguous.
fatal: Needed a single revision
Invalid commit name: badbeef
Demonstrate this problem with a couple of specially crafted commits
which initially have distinct abbreviated SHA-1's, but for which the
abbreviated SHA-1's collide after a simple rewording of the first
commit's message.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As its very first action, t3404 installs (via set_fake_editor) a
specialized $EDITOR which simplifies automated 'rebase -i' testing. Many
tests rely upon this setting, thus tests which need a different editor
must take extra care upon completion to restore $EDITOR in order to
avoid breaking following tests. This places extra burden upon such tests
and requires that they undesirably have extra knowledge about
surrounding tests. Ease this burden by having each test install the
$EDITOR it requires, rather than relying upon a global setting.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some implementations of 'echo' (e.g. dash's built-in) interpret
backslash sequences in their arguments.
This triggered at least one bug: the error message of "rebase -i" was
turning \t in commit messages into actual tabulations. There may be
others.
Using "printf '%s\n'" instead avoids this bad behavior, and is the form
used by the "say" function.
Noticed-by: David Kastrup <dak@gnu.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase [-i]" used to leave just "rebase" as its reflog message
for some operations. This rewords them to be more informative.
* rr/rebase-reflog-message-reword:
rebase -i: use a better reflog message
rebase: use a better reflog message
Merge strategy and its options can be specified in `git rebase`,
but with `--interactive`, they were completely ignored.
Signed-off-by: Arnaud Fontaine <arnau@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow various commit objects to be given to "git rebase" by ':/look
for this string' syntax, e.g. "git rebase --onto ':/there'".
* rr/rebase-sha1-by-string-query:
rebase: use peel_committish() where appropriate
sh-setup: add new peel_committish() helper
t/rebase: add failing tests for a peculiar revision
Now that the "checkout" invoked internally from "rebase -i" knows to
honor GIT_REFLOG_ACTION, we can start to use it to write a better
reflog message when "rebase anotherbranch", "rebase --onto branch",
etc. internally checks out the new fork point. We will write:
rebase -i: checkout master
instead of the old
rebase -i
As all the calls git-rebase--interactive make to underlying git
commands that leave reflog messages are preceded by the internal
comment_for_reflog helper function, which uses the original value of
the GIT_REFLOG_ACTION variable it saw when it first started, the new
assignments to GIT_REFLOG_ACTION actively contaminate the value of
the variable, knowing that it will be reset to a sane value before
it is used again. This does not generally hold true but it should
suffice for now.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mz/rebase-tests:
rebase topology tests: fix commit names on case-insensitive file systems
tests: move test for rebase messages from t3400 to t3406
t3406: modernize style
add tests for rebasing merged history
add tests for rebasing root
add tests for rebasing of empty commits
add tests for rebasing with patch-equivalence present
add simple tests of consistency across rebase types
The revisions specified on the command-line as <onto> and <upstream>
arguments could be of the form :/quuxery; so, use peel_committish() to
resolve them. The failing tests in t/rebase and t/rebase-interactive
now pass.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following commands fail, even if :/quuxery and :/foomery resolve to
perfectly valid commits:
$ git rebase [-i] --onto :/quuxery :/foomery
This is because rebase [-i] attempts to rev-parse ${REV}^0 to verify
that the given revision resolves to a commit. Add tests to document
these failures.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Tests are modified to assume correct (default) configuration at entry,
and to reset the modified configuration variables at the end.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit eff80a9 (Allow custom "comment char") introduced a custom comment
character for commit messages but did not teach git-rebase--interactive
to use it.
Change git-rebase--interactive to read core.commentchar and use its
value when generating commit messages and for the command list.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A function for checking that two given parameters refer to the same
revision was defined in several places, so move the definition to
test-lib-functions.sh instead.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach an option to edit the insn sheet to "git rebase -i".
* aw/rebase-i-edit-todo:
rebase -i: suggest using --edit-todo to fix an unknown instruction
rebase -i: Add tests for "--edit-todo"
rebase -i: Teach "--edit-todo" action
rebase -i: Refactor help messages for todo file
rebase usage: subcommands can not be combined with -i
When the todo sheet of interactive rebase instructs to run a non-existing
command, the operation stops with the following error:
Execution failed: no-such
You can fix the problem, and then run
git rebase --continue
fatal: 'rebase' appears to be a git command, but we were not
able to execute it. Maybe git-rebase is broken?
The reason is that the shell that attempted to run the command exits with
code 127. rebase--interactive just forwards this code to the caller (the
git wrapper). But our smart run-command infrastructure detects this
special exit code and turns it into ENOENT, which in turn is interpreted
by the git wrapper as if the external command that it just executed did
not exist. This is finally translated to the misleading last two lines in
error message cited above.
Fix it by translating the error code before it is forwarded.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add i18n support for scripted Porcelains, and mark strings in
merge(-recursive), am, and rebase for i18n.
* jx/i18n-1.7.11:
i18n: merge-recursive: mark strings for translation
Remove dead code which contains bad gettext block
i18n: am: mark more strings for translation
rebase: remove obsolete and unused LONG_USAGE which breaks xgettext
i18n: Rewrite gettext messages start with dash
i18n: rebase: mark messages for translation
i18n: New keywords for xgettext extraction from sh
Gettext message in a shell script should not start with '-', one
workaround is adding '--' between gettext and the message, like:
gettext -- "--exec option ..."
But due to a bug in the xgettext extraction, xgettext can not
extract the actual message for this case. Rewriting the message
is a simpler and better solution.
Reported-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a bug with git rebase -i --root when a fixup or squash line is
applied to the new root. We attempt to amend the commit onto which they
apply with git reset --soft HEAD^ followed by a normal commit. Unlike a
real commit --amend, this sequence will fail against a root commit as it
has no parent.
Fix rebase -i to use commit --amend for fixup and squash instead, and
add a test for the case of a fixup of the root commit.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase [-i] --root $tip" can now be used to rewrite all the
history down to the root.
* cw/rebase-i-root:
t3404: make test 57 work with dash and others
Add tests for rebase -i --root without --onto
rebase -i: support --root without --onto
The construct
VAR=value test_must_fail command args
works only for some shells (such as bash) but not others (such as dash)
because VAR=value does not end up in the environment for command when it
is called by the shell function test_must_fail. That is why we explicitly
set and export variable in a subshell, i.e.
(
VAR=value &&
export VAR &&
test_must_fail command args
)
in most places already, bar the newly introduced 57 from b64b7fe
(Add tests for rebase -i --root without --onto, 2012-06-26).
Make test 57 use that construct also.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test for likely breakages in t3404, including successful reordering of
non-conflicting changes with a new root, correct preservation of commit
message and author in a root commit when it is squashed with the
sentinel, and presence of the sentinel following a conflicting
cherry-pick of a new root.
Remove test_must_fail for git rebase --root without --onto from t3412 as
this case will now be successfully handled by an implicit git rebase -i.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During an interactive rebase session, it is sometimes desirable to
run tests on each commit in the resulting history. This can be done
by adding "exec <test command>" when editing the insn sheet, but the
command used for testing is often the same for all resulting commits.
By passing "--exec <cmd>" from the command line, automatically add
these "exec" lines after each commit in the final history. To work
well with the --autosquash option, these are added at the end of
each run of "fixup" and "squash".
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Jens Lehmann (1) and Johannes Sixt (1)
* maint:
Consistently use "superproject" instead of "supermodule"
t3404: begin "exchange commits with -p" test with correct preconditions
The test case shows a bug in 'rebase -p', but even if the bug were fixed
the test would fail because it did not ensure that the preconditions match
the postconditions that were checked. Insert the suitable 'git checkout'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Number of columns required for change counts is now computed based on
the maximum number of changed lines instead of being fixed. This means
that usually a few more columns will be available for the filenames
and the graph.
The graph width logic is also modified to include enough space for
"Bin XXX -> YYY bytes".
If changes to binary files are mixed with changes to text files,
change counts are padded to take at least three columns. And the other
way around, if change counts require more than three columns, then
"Bin"s are padded to align with the change count. This way, the +-
part starts in the same column as "XXX -> YYY" part for binary files.
This makes the graph easier to parse visually thanks to the empty
column. This mimics the layout of diff --stat before this change.
Tests and the tutorial are updated to reflect the new --stat output.
This means either the removal of extra padding and/or the addition of
up to three extra characters to truncated filenames. One test is added
to check the graph alignment when a binary file change and text file
change of more than 999 lines are committed together.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-rebase--interactive stops due to a conflict and the only change
to be committed is in a submodule, the test for whether there is
anything to be committed ignores the staged submodule change. This
leads rebase to skip creating the commit for the change.
While unstaged submodule changes should be ignored to avoid needing to
update submodules during a rebase, it is safe to remove the
--ignore-submodules option to diff-index because --cached ensures that
it is only checking the index. This was discussed in [1] and a test is
included to ensure that unstaged changes are still ignored correctly.
[1] http://thread.gmane.org/gmane.comp.version-control.git/188713
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After an "exec false" stops the rebase and gives the control back to
the user, if changes are added to the index, "rebase --continue" fails
with this message, which may technically be correct, but does not point
at the real problem:
.../git-rebase--interactive: line 774: .../.git/rebase-merge/author-script: No such file or directory
We could try auto-amending HEAD, but this goes against the logic of
.git/rebase-merge/author-script (see also the testcase 'auto-amend only
edited commits after "edit"' in t3404-rebase-interactive.sh) to
auto-amend something the user hasn't explicitely asked to edit.
Instead of doing anything automatically, detect the situation and give a
clean error message. While we're there, also clarify the error message in
case '. "$author_script"' fails, which now corresponds to really weird
senario where the author script exists but can't be read.
Test-case-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider this graph:
D---E (topic, HEAD)
/ /
A---B---C (master)
\
F (topic2)
and the following three commands:
1. git rebase -i -p A
2. git rebase -i -p --onto F A
3. git rebase -i -p B
Currently, (1) and (2) will pick B, D, C, and E onto A and F,
respectively. However, (3) will only pick D and E onto B, but not C,
which is inconsistent with (1) and (2). As a result, we cannot modify C
during the interactive-rebase.
The current behavior also creates a bug if we do:
4. git rebase -i -p C
In (4), E is never picked. And since interactive-rebase resets "HEAD"
to "onto" before picking any commits, D and E are lost after the
interactive-rebase.
This patch fixes the inconsistency and bug by ensuring that all children
of upstream are always picked. This essentially reverts the commit:
d80d6bc146
When compiling the todo list, commits reachable from "upstream" should
never be skipped under any conditions. Otherwise, we lose the ability
to modify them like (3), and create a bug like (4).
Two of the tests contain a scenario like (3). Since the new behavior
added more commits for picking, these tests need to be updated to
account for the additional pick lines. A new test has also been added
for (4).
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we finish a rebase, our detached HEAD is at the final
result. We update the original branch ref with this result,
and then point the HEAD symbolic ref at the updated branch.
We write a reflog for the branch update, but not for the
update of HEAD.
Because we're already at the final result on the detached
HEAD, moving to the branch actually doesn't change our
commit sha1 at all. So in that sense, a reflog entry would
be pointless.
However, humans do read reflogs, and an entry saying "rebase
finished: returning to refs/heads/master" can be helpful in
understanding what is going on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Johannes Schindelin
Phil Hord
Jeff King
Eric Sunshine
Kirill A. Shutemov
Michael S. Tsirkin
David Tran
Matthieu Moy
Arnaud Fontaine
Ramkumar Ramachandra
Martin von Zweigbergk
Felipe Contreras
Yann Droneaud
John Keeping
Johannes Sixt
Andrew Wong
Jiang Xin
Chris Webb
Michael J Gruber
Lucien Kong
Zbigniew Jędrzejewski-Szmek