"git format-patch" can take a set of configured format.notes values
to specify which notes refs to use in the log message part of the
output. The behaviour of this was not consistent with multiple
--notes command line options, which has been corrected.
* dl/format-patch-notes-config-fixup:
notes.h: fix typos in comment
notes: break set_display_notes() into smaller functions
config/format.txt: clarify behavior of multiple format.notes
format-patch: move git_config() before repo_init_revisions()
format-patch: use --notes behavior for format.notes
notes: extract logic into set_display_notes()
notes: create init_display_notes() helper
notes: rename to load_display_notes()
In 1d7297513d (notes: break set_display_notes() into smaller functions,
2019-12-11), we introduced a comment which had a couple of typos. In the
first typo, we referenced 'enable_default_display_notes' instead of
'enable_ref_display_notes'. In the second typo, we wrote "is a points to"
instead of "is a pointer to". Correct both of these typos.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8164c961e1 (format-patch: use --notes behavior for format.notes,
2019-12-09), we introduced set_display_notes() which was a monolithic
function with three mutually exclusive branches. Break the function up
into three small and simple functions that each are only responsible for
one task.
This family of functions accepts an `int *show_notes` instead of
returning a value suitable for assignment to `show_notes`. This is for
two reasons. First of all, this guarantees that the external
`show_notes` variable changes in lockstep with the
`struct display_notes_opt`. Second, this prompts future developers to be
careful about doing something meaningful with this value. In fact, a
NULL check is intentionally omitted because causing a segfault here
would tell the future developer that they are meant to use the value for
something meaningful.
One alternative was making the family of functions accept a
`struct rev_info *` instead of the `struct display_notes_opt *`, since
the former contains the `show_notes` field as well. This does not work
because we have to call git_config() before repo_init_revisions().
However, if we had a `struct rev_info`, we'd need to initialize it before
it gets assigned values from git_config(). As a result, we break the
circular dependency by having standalone `int show_notes` and
`struct display_notes_opt notes_opt` variables which temporarily hold
values from git_config() until the values are copied over to `rev`.
To implement this change, we need to get a pointer to
`rev_info::show_notes`. Unfortunately, this is not possible with
bitfields and only direct-assignment is possible. Change
`rev_info::show_notes` to a non-bitfield int so that we can get its
address.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of open coding the logic that tweaks the variables in
`struct display_notes_opt` within handle_revision_opt(), abstract away the
logic into set_display_notes() so that it can be reused.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently open code the initialization for revs->notes_opt. Abstract
this away into a helper function so that the logic can be reused in a
future commit.
This is slightly wasteful as we memset the struct twice but this is only
run once so it shouldn't have any major effect.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the function comment, init_display_notes() was supposed to
"Load the notes machinery for displaying several notes trees." Rename
this function to load_display_notes() so that its use is more accurately
represented.
This is done because, in a future commit, we will reuse the name
init_display_notes().
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'flags' parameter was replaced by 'raw' in commit:
76141e2e62 ("format_note(): simplify API", 2012-10-17)
Signed-off-by: Chris Mayo <aklhfex@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I looped over the toplevel header files, creating a temporary two-line C
program for each consisting of
#include "git-compat-util.h"
#include $HEADER
This patch is the result of manually fixing errors in compiling those
tiny programs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the definition and declaration of write_notes_tree to
struct object_id and adjust usage of this function.
Additionally, improve style of small part of this function, as old
formatting made it hard to understand at glance what this part of
code is doing.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the definition and declarations of combine_notes_* functions
to struct object_id and adjust usage of these functions.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert add_note, get_note, and copy_note to take struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make get_note return a pointer to a const struct object_id. Add a
defensive check to ensure we don't accidentally dereference a NULL
pointer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert for_each_note and each of the callbacks to use struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git notes merge" used to limit the source of the merged notes tree
to somewhere under refs/notes/ hierarchy, which was too limiting
when inventing a workflow to exchange notes with remote
repositories using remote-tracking notes trees (located in e.g.
refs/remote-notes/ or somesuch).
* jk/notes-merge-from-anywhere:
notes: allow merging from arbitrary references
Create a new expansion function, expand_loose_notes_ref which will first
check whether the ref can be found using get_sha1. If it can't be found
then it will fallback to using expand_notes_ref. The content of the
strbuf will not be changed if the notes ref can be located using
get_sha1. Otherwise, it may be updated as done by expand_notes_ref.
Since we now support merging from non-notes refs, remove the test case
associated with that behavior. Add a test case for merging from a
non-notes ref.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
init_notes() is the main point of entry to the notes API. It ensures
that the input can be used as ref, because it needs a ref to update to
store notes tree after modifying it.
There however are many use cases where notes tree is only read, e.g.
"git log --notes=...". Any notes-shaped treeish could be used for such
purpose, but it is not allowed due to existing restriction.
Allow treeish expressions to be used in the case the notes tree is going
to be used without write "permissions". Add a flag to distinguish
whether the notes tree is intended to be used read-only, or will be
updated.
With this change, operations that use notes read-only can be fed any
notes-shaped tree-ish can be used, e.g. git log --notes=notes@{1}.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We either stuff the notes message without modification for %N
userformat, or format it for human consumption. Using two bits
is an overkill that does not benefit anybody.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for more notes-related revision
command-line options.
The "suppress_default_notes" option is renamed to
"use_default_notes", and is now a tri-state with values less
than one indicating "not set". If the value is "not set",
then we show default refs if and only if no other refs were
given.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to use an extra pointer, which just ends up
leaking memory. The fact that the list is empty tells us the
same thing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is useful for other commands besides "git
notes" which want to let users refer to notes by their
shorthand name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/notes-merge: (23 commits)
Provide 'git merge --abort' as a synonym to 'git reset --merge'
cmd_merge(): Parse options before checking MERGE_HEAD
Provide 'git notes get-ref' to easily retrieve current notes ref
git notes merge: Add testcases for merging notes trees at different fanouts
git notes merge: Add another auto-resolving strategy: "cat_sort_uniq"
git notes merge: --commit should fail if underlying notes ref has moved
git notes merge: List conflicting notes in notes merge commit message
git notes merge: Manual conflict resolution, part 2/2
git notes merge: Manual conflict resolution, part 1/2
Documentation: Preliminary docs on 'git notes merge'
git notes merge: Add automatic conflict resolvers (ours, theirs, union)
git notes merge: Handle real, non-conflicting notes merges
builtin/notes.c: Refactor creation of notes commits.
git notes merge: Initial implementation handling trivial merges only
builtin/notes.c: Split notes ref DWIMmery into a separate function
notes.c: Use two newlines (instead of one) when concatenating notes
(trivial) t3303: Indent with tabs instead of spaces for consistency
notes.h/c: Propagate combine_notes_fn return value to add_note() and beyond
notes.h/c: Allow combine_notes functions to remove notes
notes.c: Reorder functions in preparation for next commit
...
Conflicts:
builtin.h
This new strategy is similar to "concatenate", but in addition to
concatenating the two note candidates, this strategy sorts the resulting
lines, and removes duplicate lines from the result. This is equivalent to
applying the "cat | sort | uniq" shell pipeline to the two note candidates.
This strategy is useful if the notes follow a line-based format where one
wants to avoid duplicate lines in the merge result.
Note that if either of the note candidates contain duplicate lines _prior_
to the merge, these will also be removed by this merge strategy.
The patch also contains tests and documentation for the new strategy.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combine_notes_fn functions uses a non-zero return value to indicate
failure. However, this return value was converted to a call to die()
in note_tree_insert().
Instead, propagate this return value out to add_note(), and return it
from there to enable the caller to handle errors appropriately.
Existing add_note() callers are updated to die() upon failure, thus
preserving the current behaviour. The only exceptions are copy_note()
and notes_cache_put() where we are able to propagate the add_note()
return value instead.
This patch has been improved by the following contributions:
- Jonathan Nieder: Future-proof by always checking add_note() return value
- Jonathan Nieder: Improve clarity of final if-condition in note_tree_insert()
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow combine_notes functions to request that a note be removed, by setting
the resulting note SHA1 to null_sha1 (0000000...).
For consistency, also teach note_tree_insert() to skip insertion of an empty
note (a note with entry->val_sha1 equal to null_sha1) when there is no note
to combine it with.
In general, an empty note (null_sha1) is treated identically to no note at
all, but when adding an empty note where there already exists a non-empty
note, we allow the combine_notes function to potentially record a new/changed
note. Document this behaviour, and clearly specify how combine_notes functions
are expected to handle null_sha1 in input.
Before this patch, storing null_sha1s in the notes tree were silently allowed,
causing an invalid notes tree (referring to blobs with null_sha1) to be
produced by write_notes_tree().
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend remove_note() in the notes API to return whether or not a note was
actually removed. Use this in 'git notes remove' to skip the creation of
a notes commit when no notes were actually removed.
Also add a test illustrating the change in behavior.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
msvc: Fix some compiler warnings
Documentation: grep: fix asciidoc problem with --
msvc: Fix some "expr evaluates to function" compiler warnings
In particular, the following warning is issued while compiling
notes.c:
notes.c(927) : warning C4550: expression evaluates to a \
function which is missing an argument list
along with identical warnings on lines 928, 1016 and 1017.
In order to suppress the warning, we change the definition of
combine_notes_fn, so that the symbol type is an (explicit)
"pointer to function ...". As a result, several other
declarations need some minor fix-up to take account of the
new typedef.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce -n and -v options for "git notes prune" in complete analogy to
"git prune" so that one can check for dangling notes easily.
The output is a list of names of objects whose notes would be resp.
are removed so that one can check the object ("git show sha1") as well as
the note ("git notes show sha1").
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The IRIX MIPSPro compiler complains like this:
cc-1107 c99: WARNING File = notes.h, Line = 215
A signed bit field has a length of 1 bit.
int suppress_default_notes:1;
^
'unsigned' is what was intended, so lets make it so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the notes copying is a bit wasteful since it always creates
new trees, even if no notes were copied at all.
Teach add_note() and remove_note() to flag the affected notes tree as
changed ('dirty'). Then teach builtin/notes.c to use this knowledge
and avoid committing trees that weren't changed.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This implements a mass-copy command that takes a sequence of lines in
the format
<from-sha1> SP <to-sha1> [ SP <rest> ] LF
on stdin, and copies each <from-sha1>'s notes to the <to-sha1>. The
<rest> is ignored. The intent, of course, is that this can read the
same input that the 'post-rewrite' hook gets.
The copy_note() function is exposed for everyone's and in particular
the next commit's use.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, you can set notes.displayRef to a glob that points at
your favourite notes refs, e.g.,
[notes]
displayRef = refs/notes/*
Then git-log and friends will show notes from all trees.
Thanks to Junio C Hamano for lots of feedback, which greatly
influenced the design of the entire series and this commit in
particular.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an object is made unreachable by Git, any notes that annotate that object
are not automagically made unreachable, since all notes are always trivially
reachable from a notes ref. In order to remove notes for non-existing objects,
we therefore need to add functionality for traversing the notes tree and
explicitly removing references to notes that annotate non-reachable objects.
Thus the notes objects themselves also become unreachable, and are removed
by a later garbage collect.
prune_notes() performs this traversal (by using for_each_note() internally),
and removes the notes in question from the notes tree.
Note that the effect of prune_notes() is not persistent unless a subsequent
call to write_notes_tree() is made.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The note tree structure allows for non-note entries to coexist with note
entries in a notes tree. Although we certainly expect there to be very
few non-notes in a notes tree, we should still support them to a certain
degree.
This patch teaches the notes code to preserve non-notes when updating the
notes tree with write_notes_tree(). Non-notes are not affected by fanout
restructuring.
For non-notes to be handled correctly, we can no longer allow subtree
entries that do not match the fanout structure produced by the notes code
itself. This means that fanouts like 4/36, 6/34, 8/32, 4/4/32, etc. are
no longer recognized as note subtrees; only 2-based fanouts are allowed
(2/38, 2/2/36, 2/2/2/34, etc.). Since the notes code has never at any point
_produced_ non-2-based fanouts, it is highly unlikely that this change will
cause problems for anyone.
The patch also adds some tests verifying the correct handling of non-notes
in a notes tree.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding a note to an object that already has an existing note, the
current solution is to concatenate the contents of the two notes. However,
the caller may instead wish to _overwrite_ the existing note with the new
note, or maybe even _ignore_ the new note, and keep the existing one. There
might also be other ways of combining notes that are only known to the
caller.
Therefore, instead of unconditionally concatenating notes, we let the caller
specify how to combine notes, by passing in a pointer to a function for
combining notes. The caller may choose to implement its own function for
notes combining, but normally one of the following three conveniently
supplied notes combination functions will be sufficient:
- combine_notes_concatenate() combines the two notes by appending the
contents of the new note to the contents of the existing note.
- combine_notes_overwrite() replaces the existing note with the new note.
- combine_notes_ignore() keeps the existing note, and ignores the new note.
A combine_notes function can be passed to init_notes() to choose a default
combine_notes function for that notes tree. If NULL is given, the notes tree
falls back to combine_notes_concatenate() as the ultimate default.
A combine_notes function can also be passed directly to add_note(), to
control the notes combining behaviour for a note addition in particular.
If NULL is passed, the combine_notes function registered for the given
notes tree is used.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new struct notes_tree encapsulates access to a specific notes tree.
It is provided to allow callers to make use of several different notes trees
simultaneously.
A struct notes_tree * parameter is added to every function in the notes API.
In all cases, NULL can be passed, in which case the fallback "default" notes
tree (default_notes_tree) is used.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Uses for_each_note() to traverse the notes tree, and produces tree
objects on the fly representing the "on-disk" version of the notes
tree with appropriate fanout.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes a first attempt at creating an optimal fanout scheme (which
is calculated on-the-fly, while traversing).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created by a simple cleanup and rename of lookup_notes().
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes adding internal functions for maintaining a healthy notes tree
structure after removing individual notes.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created by a simple refactoring of initialize_notes().
Also add a new 'flags' parameter, which is a bitwise combination of notes
initialization flags. For now, there is only one flag - NOTES_INIT_EMPTY -
which indicates that the notes tree should not auto-load the contents of
the given (or default) notes ref, but rather should leave the notes tree
initialized to an empty state. This will become useful in the future when
manipulating the notes tree through the notes API.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is really no reason why only commit objects can be annotated. By
changing the struct commit parameter to get_commit_notes() into a sha1 we
gain the ability to annotate any object type. To reflect this in the function
naming as well, we rename get_commit_notes() to format_note().
This patch also fixes comments and variable names throughout notes.c as a
consequence of the removal of the unnecessary 'commit' restriction.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to be rude to memory-concious callers...
This patch has been improved by the following contributions:
- Junio C Hamano: avoid old-style declaration
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the following flags to get_commit_notes() for adjusting the
format of the produced note string:
- NOTES_SHOW_HEADER: Print "Notes:" line before the notes contents
- NOTES_INDENT: Indent notes contents by 4 spaces
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Denton Liu
Chris Mayo
Elijah Newren
Patryk Obara
brian m. carlson
Jacob Keller
Mike Hommey
Ondřej Bílka
Jeff King
Johan Herland
Ramsay Jones
Michael J Gruber
Brandon Casey
Thomas Rast