This is needed because we want to use the
advice.pushnonfastforward variable.
Previously, we would load the config on demand only when we
needed to look at push.default. Which meant that "git push"
would load it, but "git push remote" would not, leading to
differing behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces an earlier patch by Björn Gustavsson,
Message-ID: <4AD75029.1010109@gmail.com>
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git push -h' shows usage text with incomplete list of options and then
has a separate list of options that are supported. Imitate the way other
commands (I looked at 'git diff' for an example) show their options.
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-push is not currently using -n for anything else, and it seems
unlikely we will want to use it to mean anything else in the future,
so add it as an alias for convenience.
Signed-off-by: Nelson Elhage <nelhage@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This message is designed to help new users understand what
has happened when refs fail to push. However, it does not
help experienced users at all, and significantly clutters
the output, frequently dwarfing the regular status table and
making it harder to see.
This patch introduces a general configuration mechanism for
optional messages, with this push message as the first
example.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The extreme raggedness of the right edge make this jarring
to read. Let's re-flow the text to fill the lines in a more
even way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We must use an article when referring to the section
because it is a non-proper noun, and it must be the definite
article because we are referring to a specific section.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
push: point to 'git pull' and 'git push --force' in case of non-fast forward
Documentation: add: <filepattern>... is optional
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
'git push' failing because of non-fast forward is a very common situation,
and a beginner does not necessarily understand "fast forward" immediately.
Add a new section to the git-push documentation and refer them to it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some transports produce output even without "--verbose"
turned on. This provides a way to tell them to be more
quiet (whereas simply redirecting might lose error
messages).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the message said "we will be changing the default in the future, so
this is to warn people who want to keep the current default what to do",
it would have made some sense, but as it stands, the message is merely an
unsolicited advertisement for a new feature, which it is not helpful at
all. Squelch it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --porcelain is used git-push will produce machine-readable output. The
output status line for each ref will be tab-separated and sent to stdout instead
of stderr. The full symbolic names of the refs will be given. For example
$ git push --dry-run --porcelain master :foobar 2>/dev/null \
| perl -pe 's/\t/ TAB /g'
= TAB refs/heads/master:refs/heads/master TAB [up to date]
- TAB :refs/heads/foobar TAB [deleted]
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a config setting remote.$remotename.pushurl which is
used for pushes only. If absent remote.$remotename.url is used for
pushes and fetches as before.
This is useful, for example, in order to do passwordless fetches
(remote update) over the git transport but pushes over ssh.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To give OPT_FILENAME the prefix, we pass the prefix to parse_options()
which passes the prefix to parse_options_start() which sets the prefix
member of parse_opts_ctx accordingly. If there isn't a prefix in the
calling context, passing NULL will suffice.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fg/push-default:
builtin-push.c: Fix typo: "anythig" -> "anything"
Display warning for default git push with no push.default config
New config push.default to decide default behavior for push
Conflicts:
Documentation/config.txt
If a git push without any refspecs is attempted, display a warning.
The current default behavior is to push all matching refspecs, which
may come as a surprise to new users, so the warning shows how
push.default can be configured and what the possible values are.
Traditionalists who wish to keep the current behaviour are also told
how to configure this once and never see the warning again.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git push" is not told what refspecs to push, it pushes all matching
branches to the current remote. For some workflows this default is not
useful, and surprises new users. Some have even found that this default
behaviour is too easy to trigger by accident with unwanted consequences.
Introduce a new configuration variable "push.default" that decides what
action git push should take if no refspecs are given or implied by the
command line arguments or the current remote configuration.
Possible values are:
'nothing' : Push nothing;
'matching' : Current default behaviour, push all branches that already
exist in the current remote;
'tracking' : Push the current branch to whatever it is tracking;
'current' : Push the current branch to a branch of the same name,
i.e. HEAD.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there's no explicitly-named remote, we use the remote specified
for the current branch, which in turn defaults to "origin". But it
this case should require the remote to actually be configured, and not
fall back to the path "origin".
Possibly, the config file's "remote = something" should require the
something to be a configured remote instead of a bare repository URL,
but we actually test with a bare repository URL.
In fetch, we were giving the sensible error message when coming up
with a URL failed, but this wasn't actually reachable, so move that
error up and use it when appropriate.
In push, we need a new error message, because the old one (formerly
unreachable without a lot of help) used the repo name, which was NULL.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Do not use errno when pread() returns 0
git init: --bare/--shared overrides system/global config
git-push.txt: Describe --repo option in more detail
git rm: refresh index before up-to-date check
Fix a few typos in relnotes
The --repo option was described in a way that the reader would have to
assume that it is the same as the <repository> parameter. But it actually
servers a purpose, which is now written down.
Furthermore, the --mirror option was missing from the synopsis.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It may be unclear that --all, --mirror, --tags and/or explicit refspecs
are illegal combinations for git push.
Git was silently failing in these cases, while we can complaint more
properly about it.
Signed-off-by: Marek Zawirski <marek.zawirski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a remote.*.mirror configuration option that,
when set, automatically puts git-push in --mirror mode for that
remote.
Furthermore, the option is set automatically by `git remote
add --mirror'.
The code in remote.c to parse remote.*.skipdefaultupdate
had a subtle problem: a comment in the code indicated that
special care was needed for boolean options, but this care was
not used in parsing the option. Since I was touching related
code, I did this fix too.
[jc: and I further fixed up the "ignore boolean" code.]
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing a refspec like "HEAD", we used to treat it as
"HEAD:HEAD", which didn't work without rewriting. Instead, we should
resolve the ref. If it's a symref, further require it to point to a
branch, to avoid doing anything especially unexpected. Also remove the
rewriting previously added in builtin-push.
Since the code for "HEAD" uses the regular refspec parsing, it
automatically handles "+HEAD" without anything special.
[jc: added a further test to make sure that "remote.*.push = HEAD" works]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing message indicates that an error occured during
push, but it is unclear whether _any_ refs were actually
pushed (even though the status table above shows which were
pushed successfully and which were not, the message "failed
to push" implies a total failure). By indicating that "some
refs" failed, we hopefully indicate to the user that the
table above contains the details.
We could also put in an explicit "see above for details"
message, but it seemed to clutter the output quite a bit
(both on a line of its own, or at the end of the error line,
which inevitably wraps).
This could also be made more fancy if the transport
mechanism passed back more details on how many refs
succeeded and failed:
error: failed to push %d out of %d refs to '%s'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/refspec-match:
refactor fetch's ref matching to use refname_match()
push: use same rules as git-rev-parse to resolve refspecs
add refname_match()
push: support pushing HEAD to real branch name
This teaches "push <remote> HEAD" to resolve HEAD on the local
side to its real branch name, e.g. master, and then act as if
the real branch name was specified. So we have a shorthand for
pushing the current branch. Besides HEAD, no other symbolic ref
is resolved.
Thanks to Daniel Barkalow <barkalow@iabervon.org> for suggesting
this implementation, which is much simpler than the
implementation proposed before.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A --verbose option to push should also be passed to the
transport layer, i.e. git-send-pack, git-http-push.
git push is modified to do so.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtin-fetch topic changed push's handling of --all to setting
the new TRANSPORT_PUSH_ALL flag before starting the push subroutine
for the given transport. Unfortunately not all references within
builtin-push were changed to test this flag therefore allowing push
to incorrectly accept refspecs and --all.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
The default behaviour of git-push is potentially confusing
for new users, since it will push changes that are not on
the current branch. Publishing patches that were still
cooking on a development branch is hard to undo.
It would also be nice to be able to verify the expansion
of refspecs if you've edited them, so that you know
what branches matched on the server.
Adding a --dry-run flag allows the user to experiment
safely and learn how to use git-push properly. Originally
suggested by Steffen Prohaska.
Signed-off-by: Brian Ewins <brian.ewins@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Anyplace we talk about the address of a remote repository we always
refer to it as a URL, especially in the configuration file and
.git/remotes where we call it "remote.$n.url" or start the first
line with "URL:". Calling this value a uri within the internal C
code just doesn't jive well with our commonly accepted terms.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't actually need to know at the time of transport_get if the
caller wants to fetch, push, or do both on the returned object.
It is easier to just delay the initialization of the HTTP walker
until we know we will need it by providing a CURL specific fetch
function in the curl_transport that makes sure the walker instance
is initialized before use.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the code to call push backends into a library that can be
extended to make matching fetch and push decisions based on the URL it
gets, and which could be changed to have built-in implementations
instead of calling external programs.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1) pushes happen less often than fetches, so the bandwidth saving is
much less visible in that case overall.
2) thin packs have to be complemented with missing delta bases to be
valid, so many received thin packs will take more disk space.
3) the bother of repacking should be distributed amongst "clients"
i.e. fetchers and pushers as much as possible, and not the server
being fetched or pushed, to keep disk and CPU usage low on the
server.
This is why a fetch should get thin packs but a push should not.
Both Nico and I have been assuming that --no-thin was the default
behavior of git-push ever since Nico introduced --fix-thin into the
index-pack process, which allowed fetch and receive-pack to avoid
exploding packfiles received during transfer. This patch finally
makes it so.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This means that send-pack and http-push will support pattern refspecs,
so builtin-push.c doesn't have to expand them, and also git push can
just turn --tags into "refs/tags/*", further simplifying
builtin-push.c
check_ref_format() gets a third "conditionally okay" result for
something that's valid as a pattern but not as a particular ref.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This also adds a --remote option to send-pack, which specifies the
configured remote being used. It is provided automatically by
git-push, and must match the url (which is still needed, since there
could be multiple urls).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new parser is different from the one in builtin-push in two ways:
the default is to use the current branch's remote, if there is one,
before "origin"; and config is used in preference to remotes.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When pushing into multiple repositories with git push, via
multiple URL in .git/remotes/$shorthand or multiple url
variables in [remote "$shorthand"] section, we used to stop upon
the first failure. Continue the operation and report the
failure at the end.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This came up on #git when somebody was getting 'unable to create
./objects/tmp_oXXXX' but sweared he had write permission to that
directory. It turned out that the repository URL was changed
and he was accessing a repository he does not have a write
permission anymore.
I am not sure how much this would have helped somebody who
believed he was accessing location when the permission of that
location was changed while he was looking the other way, though.
But giving more information on the error path would be better,
and the next change would be helped with this as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano
Jeff King
Felipe Contreras
Nanako Shiraishi
Nelson Elhage
Matthieu Moy
Larry D'Anna
Michael J Gruber
Stephen Boyd
Kevin Ballard
Finn Arne Gangstad
Daniel Barkalow
Shawn O. Pearce
Johannes Sixt
Marek Zawirski
Michele Ballabio
Stephan Beyer
Paolo Bonzini
Steffen Prohaska
Andy Whitcroft
Brian Ewins
Junio C Hamano