Maintaining an array of hashes is easier using sha1_array than
open-coding it. This patch also fixes a leak of the SHA1 array
in diff_tree_combined_merge().
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the option -W/--function-context to git diff. It is similar to
the same option of git grep and expands the context of change hunks
so that the whole surrounding function is shown. This "natural"
context can allow changes to be understood better.
Note: GNU patch doesn't like diffs generated with the new option;
it seems to expect context lines to be the same before and after
changes. git apply doesn't complain.
This implementation has the same shortcoming as the one in grep,
namely that there is no way to explicitly find the end of a
function. That means that a few lines of extra context are shown,
right up to the next recognized function begins. It's already
useful in its current form, though.
The function get_func_line() in xdiff/xemit.c is extended to work
forward as well as backward to find post-context as well as
pre-context. It returns the position of the first found matching
line. The func_line parameter is made optional, as we don't need
it for -W.
The enhanced function is then used in xdl_emit_diff() to extend
the context as needed. If the added context overlaps with the
next change, it is merged into the current hunk.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Conflicts:
builtin/commit.c
parse-options.c
This lets us store more than just a bit flag for whether we
want color; we can also store whether we want automatic
colors. This can be useful for making the automatic-color
decision closer to the point of use.
This mostly just involves replacing DIFF_OPT_* calls with
manipulations of the flag. The biggest exception is that
calls to DIFF_OPT_TST must check for "o->use_color > 0",
which lets an "unknown" value (i.e., the default) stay at
"no color". In the previous code, a value of "-1" was not
propagated at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the "do not stop feeding the backend early" logic into a small
helper function and use it in both run_diff_files() and diff_tree() that
has the stop-early optimization. We may later add other types of diffcore
transformation that require to look at the whole result like diff-filter
does, and having the logic in a single place is essential for longer term
maintainability.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often one is interested in the full --stat output only for commits which
change a few files, but not others, because larger restructuring gives a
--stat which fills a few screens.
Introduce a new option --stat-count=<count> which limits the --stat output
to the first <count> lines, followed by a "..." line. It can
also be given as the third parameter in
--stat=<width>,<name-width>,<count>.
Also, the unstuck form is supported analogous to the other two stat
parameters.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/dirstat-lines:
Mark dirstat error messages for translation
Improve error handling when parsing dirstat parameters
New --dirstat=lines mode, doing dirstat analysis based on diffstat
Allow specifying --dirstat cut-off percentage as a floating point number
Add config variable for specifying default --dirstat behavior
Refactor --dirstat parsing; deprecate --cumulative and --dirstat-by-file
Make --dirstat=0 output directories that contribute < 0.1% of changes
Add several testcases for --dirstat and friends
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
This patch adds an alternative implementation of show_dirstat(), called
show_dirstat_by_line(), which uses the more expensive diffstat analysis
(as opposed to show_dirstat()'s own (relatively inexpensive) analysis)
to derive the numbers from which the --dirstat output is computed.
The alternative implementation is controlled by the new "lines" parameter
to the --dirstat option (or the diff.dirstat config variable).
For binary files, the diffstat analysis counts bytes instead of lines,
so to prevent binary files from dominating the dirstat results, the
byte counts for binary files are divided by 64 before being compared to
their textual/line-based counterparts. This is a stupid and ugly - but
very cheap - heuristic.
In linux-2.6.git, running the three different --dirstat modes:
time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null
vs.
time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null
vs.
time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null
yields the following average runtimes on my machine:
- "changes" (default): ~6.0 s
- "lines": ~9.6 s
- "files": ~0.1 s
So, as expected, there's a considerable performance hit (~60%) by going
through the full diffstat analysis as compared to the default "changes"
analysis (obviously, "files" is much faster than both). As such, the
"lines" mode is probably only useful if you really need the --dirstat
numbers to be consistent with the numbers returned from the other
--*stat options.
The patch also includes documentation and tests for the new dirstat mode.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only the first digit after the decimal point is kept, as the dirstat
calculations all happen in permille.
Selftests verifying floating-point percentage input has been added.
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e9c8409 (diff-index --cached --raw: show tree entry on the LHS for
unmerged entries., 2007-01-05) added a <mode, object name> pair as
parameters to this function, to store them in the pre-image side of an
unmerged file pair. Now the function is fixed to return the filepair it
queued, we can make the caller on the special case codepath to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying diff_queue() returns diff_filepair so that the caller can
further add information to it, and the helper function diff_unmerge()
utilizes the feature itself, but does not expose it to its callers, which
was kind of selfish.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reviewing a patch while concentrating primarily on the text after
then change, wading through pages of deleted text involves a cognitive
burden.
Introduce the -D option that omits the preimage text from the patch output
for deleted files. When used with -B (represent total rewrite as a single
wholesale deletion followed by a single wholesale addition), the preimage
text is also omitted.
To prevent such a patch from being applied by mistake, the output is
designed not to be usable by "git apply" (or GNU "patch"); it is strictly
for human consumption.
It of course is possible to "apply" such a patch by hand, as a human can
read the intention out of such a patch. It however is impossible to apply
such a patch even manually in reverse, as the whole point of this option
is to omit the information necessary to do so from the output.
Initial request by Mart Sõmermaa, documentation and tests helped by
Michael J Gruber.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are too many paths in the project, the number of rename source
candidates "git diff -C -C" finds will exceed the rename detection limit,
and no inexact rename detection is performed. We however could fall back
to "git diff -C" if the number of modified paths is sufficiently small.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We might spend many seconds doing inexact rename detection
with no output. It's nice to let the user know that
something is actually happening.
This patch adds the infrastructure, but no callers actually
turn on progress reporting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The warning is generated deep in the diffcore code, which
means that it will come first, followed possibly by a spew
of conflicts, making it hard to see.
Instead, let's have diffcore pass back the information about
how big the rename limit would needed to have been, and then
the caller can provide a more appropriate message (and at a
more appropriate time).
No refactoring of other non-merge callers is necessary,
because nobody else was even using the warn_on_rename_limit
feature.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recursive merge strategy turns on rename detection but leaves the
rename threshold at the default. Add a strategy option to allow the user
to specify a rename threshold to use.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "-G<regexp>" that is similar to "-S<regexp> --pickaxe-regexp" to the
"git diff" family of commands. This limits the diff queue to filepairs
whose patch text actually has an added or a deleted line that matches the
given regexp. Unlike "-S<regexp>", changing other parts of the line that
has a substring that matches the given regexp IS counted as a change, as
such a change would appear as one deletion followed by one addition in a
patch text.
Unlike -S (pickaxe) that is intended to be used to quickly detect a commit
that changes the number of occurrences of hits between the preimage and
the postimage to serve as a part of larger toolchain, this is meant to be
used as the top-level Porcelain feature.
The implementation unfortunately has to run "diff" twice if you are
running "log" family of commands to produce patches in the final output
(e.g. "git log -p" or "git format-patch"). I think we _could_ cache the
result in-core if we wanted to, but that would require larger surgery to
the diffcore machinery (i.e. adding an extra pointer in the filepair
structure to keep a pointer to a strbuf around, stuff the textual diff to
the strbuf inside diffgrep_consume(), and make use of it in later stages
when it is available) and it may not be worth it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/shortopt-detached:
log: parse separate option for --glob
log: parse separate options like git log --grep foo
diff: parse separate options --stat-width n, --stat-name-width n
diff: split off a function for --stat-* option parsing
diff: parse separate options like -S foo
Conflicts:
revision.c
* jc/maint-follow-rename-fix:
log: test for regression introduced in v1.7.2-rc0~103^2~2
diff --follow: do call diffcore_std() as necessary
diff --follow: do not waste cycles while recursing
Usually, diff frontends populate the output queue with filepairs without
any rename information and call diffcore_std() to sort the renames out.
When --follow is in effect, however, diff-tree family of frontend has a
hack that looks like this:
diff-tree frontend
-> diff_tree_sha1()
. populate diff_queued_diff
. if --follow is in effect and there is only one change that
creates the target path, then
-> try_to_follow_renames()
-> diff_tree_sha1() with no pathspec but with -C
-> diffcore_std() to find renames
. if rename is found, tweak diff_queued_diff and put a
single filepair that records the found rename there
-> diffcore_std()
. tweak elements on diff_queued_diff by
- rename detection
- path ordering
- pickaxe filtering
We need to skip parts of the second call to diffcore_std() that is related
to rename detection, and do so only when try_to_follow_renames() did find
a rename. Earlier 1da6175 (Make diffcore_std only can run once before a
diff_flush, 2010-05-06) tried to deal with this issue incorrectly; it
unconditionally disabled any second call to diffcore_std().
This hopefully fixes the breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "ignore" config option controls the default behavior for "git
status" and the diff family. It specifies under what circumstances they
consider submodules as modified and can be set separately for each
submodule.
The command line option "--ignore-submodules=" has been extended to accept
the new parameter "none" for both status and diff.
Users that chose submodules to get rid of long work tree scanning times
might want to set the "dirty" option for those submodules. This brings
back the pre 1.7.0 behavior, where submodule work trees were never
scanned for modifications. By using "--ignore-submodules=none" on the
command line the status and diff commands can be told to do a full scan.
This option can be set to the following values (which have the same name
and meaning as for the "--ignore-submodules" option of status and diff):
"all": All changes to the submodule will be ignored.
"dirty": Only differences of the commit recorded in the superproject and
the submodules HEAD will be considered modifications, all changes
to the work tree of the submodule will be ignored. When using this
value, the submodule will not be scanned for work tree changes at
all, leading to a performance benefit on large submodules.
"untracked": Only untracked files in the submodules work tree are ignored,
a changed HEAD and/or modified files in the submodule will mark it
as modified.
"none" (which is the default): Either untracked or modified files in a
submodules work tree or a difference between the subdmodules HEAD
and the commit recorded in the superproject will make it show up
as changed. This value is added as a new parameter for the
"--ignore-submodules" option of the diff family and "git status"
so the user can override the settings in the configuration.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the option parsing logic in revision.c to accept separate forms
like `-S foo' in addition to `-Sfoo'. The rest of git already accepted
this form, but revision.c still used its own option parsing.
Short options affected are -S<string>, -l<num> and -O<orderfile>, for
which an empty string wouldn't make sense, hence -<option> <arg> isn't
ambiguous.
This patch does not handle --stat-name-width and --stat-width, which are
special-cases where diff_long_opt do not apply. They are handled in a
separate patch to ease review.
Original patch by Matthieu Moy, plus refactoring by Jonathan Nieder.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
The textconv functionality allows one to convert a file into text before
running diff. But this functionality can be useful to other features
such as blame.
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callback can be used to add some prefix string to each line of
diff output.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch at least IBM VisualAge C 5.0 (I have 5.0.2) on AIX
5.1 fails to compile git.
enum style is inconsistent already, with some enums declared on one
line, some over 3 lines with the enum values all on the middle line,
sometimes with 1 enum value per line... and independently of that the
trailing comma is sometimes present and other times absent, often
mixing with/without trailing comma styles in a single file, and
sometimes in consecutive enum declarations.
Clearly, omitting the comma is the more portable style, and this patch
changes all enum declarations to use the portable omitted dangling
comma style consistently.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the --color-words engine a more general interface that
supports two new modes:
* --word-diff=plain, inspired by the 'wdiff' utility (most similar to
'wdiff -n <old> <new>'): uses delimiters [-removed-] and {+added+}
* --word-diff=porcelain, which generates an ad-hoc machine readable
format:
- each diff unit is prefixed by [-+ ] and terminated by newline as
in unified diff
- newlines in the input are output as a line consisting only of a
tilde '~'
Both of these formats still support color if it is enabled, using it
to highlight the differences. --color-words becomes a synonym for
--word-diff=color, which is the color-only format. Also adds some
compatibility/convenience options.
Thanks to Junio C Hamano and Miles Bader for good ideas.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1.7.0 submodules are considered dirty when they contain untracked
files. But when git status is called with the "-uno" option, the user
asked to ignore untracked files, so they must be ignored in submodules
too. To achieve this, the new flag DIFF_OPT_IGNORE_UNTRACKED_IN_SUBMODULES
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1.7.0 there are three reasons a submodule is considered modified
against the work tree: It contains new commits, modified content or
untracked content. Lets show all reasons in the long format of git status,
so the user can better asses the nature of the modification. This change
does not affect the short and porcelain formats.
Two new members are added to "struct wt_status_change_data" to store the
information gathered by run_diff_files(). wt-status.c uses the new flag
DIFF_OPT_DIRTY_SUBMODULES to tell diff-lib.c it wants to get detailed
dirty information about submodules.
A hint line for submodules is printed in the dirty header when dirty
submodules are present.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fix-tree-walk:
read-tree --debug-unpack
unpack-trees.c: look ahead in the index
unpack-trees.c: prepare for looking ahead in the index
Aggressive three-way merge: fix D/F case
traverse_trees(): handle D/F conflict case sanely
more D/F conflict tests
tests: move convenience regexp to match object names to test-lib.sh
Conflicts:
builtin-read-tree.c
unpack-trees.c
unpack-trees.h
In the worst case is_submodule_modified() got called three times for
each submodule. The information we got from scanning the whole
submodule tree the first time can be reused instead.
New parameters have been added to diff_change() and diff_addremove(),
the information is stored in a new member of struct diff_filespec. Its
value is then reused instead of calling is_submodule_modified() again.
When no explicit "-dirty" is needed in the output the call to
is_submodule_modified() is not necessary when the submodules HEAD
already disagrees with the ref of the superproject, as this alone
marks it as modified. To achieve that, get_stat_data() got an extra
argument.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the traversal of index be in sync with the tree traversal.
When unpack_callback() is fed a set of tree entries from trees, it
inspects the name of the entry and checks if the an index entry with
the same name could be hiding behind the current index entry, and
(1) if the name appears in the index as a leaf node, it is also
fed to the n_way_merge() callback function;
(2) if the name is a directory in the index, i.e. there are entries in
that are underneath it, then nothing is fed to the n_way_merge()
callback function;
(3) otherwise, if the name comes before the first eligible entry in the
index, the index entry is first unpacked alone.
When traverse_trees_recursive() descends into a subdirectory, the
cache_bottom pointer is moved to walk index entries within that directory.
All of these are omitted for diff-index, which does not even want to be
fed an index entry and a tree entry with D/F conflicts.
This fixes 3-way read-tree and exposes a bug in other parts of the system
in t6035, test #5. The test prepares these three trees:
O = HEAD^
100644 blob e69de29bb2 a/b-2/c/d
100644 blob e69de29bb2 a/b/c/d
100644 blob e69de29bb2 a/x
A = HEAD
100644 blob e69de29bb2 a/b-2/c/d
100644 blob e69de29bb2 a/b/c/d
100644 blob 587be6b4c3f93f93c489c0111bba5596147a26cb a/x
B = master
120000 blob a36b77384451ea1de7bd340ffca868249626bc52 a/b
100644 blob e69de29bb2 a/b-2/c/d
100644 blob e69de29bb2 a/x
With a clean index that matches HEAD, running
git read-tree -m -u --aggressive $O $A $B
now yields
120000 a36b77384451ea1de7bd340ffca868249626bc52 3 a/b
100644 e69de29bb2 0 a/b-2/c/d
100644 e69de29bb2 1 a/b/c/d
100644 e69de29bb2 2 a/b/c/d
100644 587be6b4c3f93f93c489c0111bba5596147a26cb 0 a/x
which is correct. "master" created "a/b" symlink that did not exist,
and removed "a/b/c/d" while HEAD did not do touch either path.
Before this series, read-tree did not notice the situation and resolved
addition of "a/b" and removal of "a/b/c/d" independently. If A = HEAD had
another path "a/b/c/e" added, this merge should conflict but instead it
silently resolved "a/b" and then immediately overwrote it to add
"a/b/c/e", which was quite bogus.
Tests in t1012 start to work with this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/1.7.0-diff-whitespace-only-status:
diff.c: fix typoes in comments
Make test case number unique
diff: Rename QUIET internal option to QUICK
diff: change semantics of "ignore whitespace" options
Conflicts:
diff.h
Inspired by the coloring of quilt.
Introduce a separate color and paint the hunk comment part, i.e. the name
of the function, in a separate color "diff.func" (defaults to plain).
Whitespace between hunk header and hunk comment is printed in plain color.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you use the option --submodule=log you can see the submodule
summaries inlined in the diff, instead of not-quite-helpful SHA-1 pairs.
The format imitates what "git submodule summary" shows.
To do that, <path>/.git/objects/ is added to the alternate object
databases (if that directory exists).
This option was requested by Jens Lehmann at the GitTogether in Berlin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option "QUIET" primarily meant "find if we have _any_ difference as
quick as possible and report", which means we often do not even have to
look at blobs if we know the trees are different by looking at the higher
level (e.g. "diff-tree A B"). As a side effect, because there is no point
showing one change that we happened to have found first, it also enables
NO_OUTPUT and EXIT_WITH_STATUS options, making the end result look quiet.
Rename the internal option to QUICK to reflect this better; it also makes
grepping the source tree much easier, as there are other kinds of QUIET
option everywhere.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, the --ignore-whitespace* options have merely meant to tell
the diff output routine that some class of differences are not worth
showing in the textual diff output, so that the end user has easier time
to review the remaining (presumably more meaningful) changes. These
options never affected the outcome of the command, given as the exit
status when the --exit-code option was in effect (either directly or
indirectly).
When you have only whitespace changes, however, you might expect
git diff -b --exit-code
to report that there is _no_ change with zero exit status.
Change the semantics of --ignore-whitespace* options to mean more than
"omit showing the difference in text".
The exit status, when --exit-code is in effect, is computed by checking if
we found any differences at the path level, while diff frontends feed
filepairs to the diffcore engine. When "ignore whitespace" options are in
effect, we defer this determination until the very end of diffcore
transformation. We simply do not know until the textual diff is
generated, which comes very late in the pipeline.
When --quiet is in effect, various diff frontends optimize by breaking out
early from the loop that enumerates the filepairs, when we find the first
path level difference; when --ignore-whitespace* is used the above change
automatically disables this optimization.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
index_is_dirty() in builtin-revert.c checks if the index is dirty.
This patch generalizes this function to check if the index differs
from a revision, i.e. the former index_is_dirty() behavior can now be
achieved by index_differs_from("HEAD", 0).
The second argument "diff_flags" allows to set further diff option
flags like DIFF_OPT_IGNORE_SUBMODULES. See DIFF_OPT_* macros in diff.h
for a list.
index_differs_from() seems to be useful for more than builtin-revert.c,
so it is moved into diff-lib.c and also used in builtin-commit.c.
Yet to mention:
- "rev.abbrev = 0;" can be safely removed.
This has no impact on performance or functioning of neither
setup_revisions() nor run_diff_index().
- rev.pending.objects is free()d because this fixes a leak.
(Also see 295dd2ad "Fix memory leak in traverse_commit_list")
Mentored-by: Daniel Barkalow <barkalow@iabervon.org>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some applications, words are not delimited by white space. To
allow for that, you can specify a regular expression describing
what makes a word with
git diff --color-words='[A-Za-z0-9]+'
Note that words cannot contain newline characters.
As suggested by Thomas Rast, the words are the exact matches of the
regular expression.
Note that a regular expression beginning with a '^' will match only
a word at the beginning of the hunk, not a word at the beginning of
a line, and is probably not what you want.
This commit contains a quoting fix by Thomas Rast.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge two hunks if there is only the specified number of otherwise unshown
context between them. For --inter-hunk-context=1, the resulting patch has
the same number of lines but shows uninterrupted context instead of a
context header line in between.
Patches generated with this option are easier to read but are also more
likely to conflict if the file to be patched contains other changes.
This patch keeps the default for this option at 0. It is intended to just
make the feature available in order to see its advantages and downsides.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Diffs that have been produced with textconv almost certainly
cannot be applied, so we want to be careful not to generate
them in things like format-patch.
This introduces a new diff options, ALLOW_TEXTCONV, which
controls this behavior. It is off by default, but is
explicitly turned on for the "log" family of commands, as
well as the "diff" porcelain (but not diff-* plumbing).
Because both text conversion and external diffing are
controlled by these diff options, we can get rid of the
"plumbing versus porcelain" distinction when reading the
config. This was an attempt to control the same thing, but
suffered from being too coarse-grained.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option --dirstat-by-file is the same as --dirstat, but it
counts "impacted files" instead of "impacted lines" (lines that are
added or removed).
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option used to be implemented as if it is a totally independent one,
but "git diff --cumulative" would not mean anything without "--dirstat".
This makes --cumulative imply --dirstat.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With a new configuration "diff.mnemonicprefix", "git diff" shows the
differences between various combinations of preimage and postimage trees
with prefixes different from the standard "a/" and "b/". Hopefully this
will make the distinction stand out for some people.
"git diff" compares the (i)ndex and the (w)ork tree;
"git diff HEAD" compares a (c)ommit and the (w)ork tree;
"git diff --cached" compares a (c)ommit and the (i)ndex;
"git-diff HEAD:file1 file2" compares an (o)bject and a (w)ork tree entity;
"git diff --no-index a b" compares two non-git things (1) and (2).
Because these mnemonics now have meanings, they are swapped when reverse
diff is in effect and this feature is enabled.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If PATH_MAX on your system is smaller than a path stored, it may cause
buffer overflow and stack corruption in diff_addremove() and diff_change()
functions when running git-diff
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/diff-no-no-index:
git diff --no-index: default to page like other diff frontends
git-diff: allow --no-index semantics a bit more
"git diff": do not ignore index without --no-index
diff-files: do not play --no-index games
tests: do not use implicit "git diff --no-index"
Even if "foo" and/or "bar" does not exist in index, "git diff foo bar"
should not change behaviour drastically from "git diff foo bar baz" or
"git diff foo". A feature that "sometimes works and is handy" is an
unreliable cute hack.
"git diff foo bar" outside a git repository continues to work as a more
colourful alternative to "diff -u" as before.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option --ignore-submodules can now be used to ignore changes in
submodules.
Why? Sometimes it is not interesting when a submodule changed.
For example, when reordering some commits in the superproject, a dirty
submodule is usually totally uninteresting. So we will use this option
in git-rebase to test for a dirty working tree.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many cases, the warning ends up as clutter, because the
diff is being done "behind the scenes" from the user (e.g.,
when generating a commit diffstat), and whether we show
renames or not is not particularly interesting to the user.
However, in the case of a merge (which is what motivated the
warning in the first place), it is a useful hint as to why a
merge with renames might have failed.
This patch makes the warning optional based on the code
calling into diffcore. We default to not showing the
warning, but turn it on for merges.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables were made unnecessary by commit
3969cf7db1.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds --relative option to the diff family. When you start
from a subdirectory:
$ git diff --relative
shows only the diff that is inside your current subdirectory,
and without $prefix part. People who usually live in
subdirectories may like it.
There are a few things I should also mention about the change:
- This works not just with diff but also works with the log
family of commands, but the history pruning is not affected.
In other words, if you go to a subdirectory, you can say:
$ git log --relative -p
but it will show the log message even for commits that do not
touch the current directory. You can limit it by giving
pathspec yourself:
$ git log --relative -p .
This originally was not a conscious design choice, but we
have a way to affect diff pathspec and pruning pathspec
independently. IOW "git log --full-diff -p ." tells it to
prune history to commits that affect the current subdirectory
but show the changes with full context. I think it makes
more sense to leave pruning independent from --relative than
the obvious alternative of always pruning with the current
subdirectory, which would break the symmetry.
- Because this works also with the log family, you could
format-patch a single change, limiting the effect to your
subdirectory, like so:
$ cd gitk-git
$ git format-patch -1 --relative 911f1eb
But because that is a special purpose usage, this option will
never become the default, with or without repository or user
preference configuration. The risk of producing a partial
patch and sending it out by mistake is too great if we did
so.
- This is inherently incompatible with --no-index, which is a
bolted-on hack that does not have much to do with git
itself. I didn't bother checking and erroring out on the
combined use of the options, but probably I should.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a new form of overview diffstat output, doing something that I
have occasionally ended up doing manually (and badly, because it's
actually pretty nasty to do), and that I think is very useful for an
project like the kernel that has a fairly deep and well-separated
directory structure with semantic meaning.
What I mean by that is that it's often interesting to see exactly which
sub-directories are impacted by a patch, and to what degree - even if you
don't perhaps care so much about the individual files themselves.
What makes the concept more interesting is that the "impact" is often
hierarchical: in the kernel, for example, something could either have a
very localized impact to "fs/ext3/" and then it's interesting to see that
such a patch changes mostly that subdirectory, but you could have another
patch that changes some generic VFS-layer issue which affects _many_
subdirectories that are all under "fs/", but none - or perhaps just a
couple of them - of the individual filesystems are interesting in
themselves.
So what commonly happens is that you may have big changes in a specific
sub-subdirectory, but still also significant separate changes to the
subdirectory leading up to that - maybe you have significant VFS-level
changes, but *also* changes under that VFS layer in the NFS-specific
directories, for example. In that case, you do want the low-level parts
that are significant to show up, but then the insignificant ones should
show up as under the more generic top-level directory.
This patch shows all of that with "--dirstat". The output can be either
something simple like
commit 81772fe...
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Sun Feb 10 23:57:36 2008 +0100
x86: remove over noisy debug printk
pageattr-test.c contains a noisy debug printk that people reported.
The condition under which it prints (randomly tapping into a mem_map[]
hole and not being able to c_p_a() there) is valid behavior and not
interesting to report.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
100.0% arch/x86/mm/
or something much more complex like
commit e231c2e...
Author: David Howells <dhowells@redhat.com>
Date: Thu Feb 7 00:15:26 2008 -0800
Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p)
20.5% crypto/
7.6% fs/afs/
7.6% fs/fuse/
7.6% fs/gfs2/
5.1% fs/jffs2/
5.1% fs/nfs/
5.1% fs/nfsd/
7.6% fs/reiserfs/
15.3% fs/
7.6% net/rxrpc/
10.2% security/keys/
where that latter example is an example of significant work in some
individual fs/*/ subdirectories (like the patches to reiserfs accounting
for 7.6% of the whole), but then discounting those individual filesystems,
there's also 15.3% other "random" things that weren't worth reporting on
their oen left over under fs/ in general (either in that directory itself,
or in subdirectories of fs/ that didn't have enough changes to be reported
individually).
I'd like to stress that the "15.3% fs/" mentioned above is the stuff that
is under fs/ but that was _not_ significant enough to report on its own.
So the above does _not_ mean that 15.3% of the work was under fs/ per se,
because that 15.3% does *not* include the already-reported 7.6% of afs,
7.6% of fuse etc.
If you want to enable "cumulative" directory statistics, you can use the
"--cumulative" flag, which adds up percentages recursively even when
they have been already reported for a sub-directory. That cumulative
output is disabled if *all* of the changes in one subdirectory come from
a deeper subdirectory, to avoid repeating subdirectories all the way to
the root.
For an example of the cumulative reporting, the above commit becomes
commit e231c2e...
Author: David Howells <dhowells@redhat.com>
Date: Thu Feb 7 00:15:26 2008 -0800
Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p)
20.5% crypto/
7.6% fs/afs/
7.6% fs/fuse/
7.6% fs/gfs2/
5.1% fs/jffs2/
5.1% fs/nfs/
5.1% fs/nfsd/
7.6% fs/reiserfs/
61.5% fs/
7.6% net/rxrpc/
10.2% security/keys/
in which the commit percentages now obviously add up to much more than
100%: now the changes that were already reported for the sub-directories
under fs/ are then cumulatively included in the whole percentage of fs/
(ie now shows 61.5% as opposed to the 15.3% without the cumulative
reporting).
The default reporting limit has been arbitrarily set at 3%, which seems
to be a pretty good cut-off, but you can specify the cut-off manually by
giving it as an option parameter (eg "--dirstat=5" makes the cut-off be
at 5% instead)
NOTE! The percentages are purely about the total lines added and removed,
not anything smarter (or dumber) than that. Also note that you should not
generally expect things to add up to 100%: not only does it round down, we
don't report leftover scraps (they add up to the top-level change count,
but we don't even bother reporting that, it only reports subdirectories).
Quite frankly, as a top-level manager this is really convenient for me,
but it's going to be very boring for git itself since there are few
subdirectories. Also, don't expect things to make tons of sense if you
combine this with "-M" and there are cross-directory renames etc.
But even for git itself, you can get some fun statistics. Try out
git log --dirstat
and see the occasional mentions of things like Documentation/, git-gui/,
gitweb/ and gitk-git/. Or try out something like
git diff --dirstat v1.5.0..v1.5.4
which does kind of git an overview that shows *something*. But in general,
the output is more exciting for big projects with deeper structure, and
doing a
git diff --dirstat v2.6.24..v2.6.25-rc1
on the kernel is what I actually wrote this for!
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff porcelain uses git_diff_ui_config to set
porcelain-ish config options, like automatically turning on
color. The plumbing specifically avoids calling this
function, since it doesn't want things like automatic color
or rename detection.
However, some diff options should be set for both plumbing
and porcelain. For example, one can still turn on color in
git-diff-files using the --color command line option. This
means we want the color config from color.diff.* (so that
once color is on, we use the user's preferred scheme), but
_not_ the color.diff variable.
We split the diff config into "ui" and "basic", where
"basic" is suitable for use by plumbing (so _most_ things
affecting the output should still go into the "ui" part).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new options "--src-prefix=<prefix>", "--dst-prefix=<prefix>"
and "--no-prefix", you can now control the path prefixes of the diff
machinery. These used to by hardwired to "a/" for the source prefix
and "b/" for the destination prefix.
Initial patch by Pascal Obry. Sane option names suggested by Linus.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason --exit-code and --check-diff must be mutually
exclusive, so assign different bits to different results and allow them
to be returned from the command. Introduce diff_result_code() to factor
out the common code to decide final status code based on diffopt
settings and use it everywhere.
Update tests to match the above fix.
Turning pager off when "diff --check" is used is a regression.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff" has a --check option that can be used to check for whitespace
problems but it only reported by printing warnings to the
console.
Now when the --check option is used we give a non-zero exit status,
making "git diff --check" nicer to use in scripts and hooks.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/diffopts:
Reorder diff_opt_parse options more logically per topics.
Make the diff_options bitfields be an unsigned with explicit masks.
Use OPT_BIT in builtin-pack-refs
Use OPT_BIT in builtin-for-each-ref
Use OPT_SET_INT and OPT_BIT in builtin-branch
parse-options new features.
reverse_diff was a bit-value in disguise, it's merged in the flags now.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier in commit 0781b8a9b2
(add_file_to_index: skip rehashing if the cached stat already
matches), add_file_to_index() were taught not to re-add the path
if it already matches the index.
The change meant well, but was not executed quite right. It
used ie_modified() to see if the file on the work tree is really
different from the index, and skipped adding the contents if the
function says "not modified".
This was wrong. There are three possible comparison results
between the index and the file in the work tree:
- with lstat(2) we _know_ they are different. E.g. if the
length or the owner in the cached stat information is
different from the length we just obtained from lstat(2), we
can tell the file is modified without looking at the actual
contents.
- with lstat(2) we _know_ they are the same. The same length,
the same owner, the same everything (but this has a twist, as
described below).
- we cannot tell from lstat(2) information alone and need to go
to the filesystem to actually compare.
The last case arises from what we call 'racy git' situation,
that can be caused with this sequence:
$ echo hello >file
$ git add file
$ echo aeiou >file ;# the same length
If the second "echo" is done within the same filesystem
timestamp granularity as the first "echo", then the timestamp
recorded by "git add" and the timestamp we get from lstat(2)
will be the same, and we can mistakenly say the file is not
modified. The path is called 'racily clean'. We need to
reliably detect racily clean paths are in fact modified.
To solve this problem, when we write out the index, we mark the
index entry that has the same timestamp as the index file itself
(that is the time from the point of view of the filesystem) to
tell any later code that does the lstat(2) comparison not to
trust the cached stat info, and ie_modified() then actually goes
to the filesystem to compare the contents for such a path.
That's all good, but it should not be used for this "git add"
optimization, as the goal of "git add" is to actually update the
path in the index and make it stat-clean. With the false
optimization, we did _not_ cause any data loss (after all, what
we failed to do was only to update the cached stat information),
but it made the following sequence leave the file stat dirty:
$ echo hello >file
$ git add file
$ echo hello >file ;# the same contents
$ git add file
The solution is not to use ie_modified() which goes to the
filesystem to see if it is really clean, but instead use
ie_match_stat() with "assume racily clean paths are dirty"
option, to force re-adding of such a path.
There was another problem with "git add -u". The codepath
shares the same issue when adding the paths that are found to be
modified, but in addition, it asked "git diff-files" machinery
run_diff_files() function (which is "git diff-files") to list
the paths that are modified. But "git diff-files" machinery
uses the same ie_modified() call so that it does not report
racily clean _and_ actually clean paths as modified, which is
not what we want.
The patch allows the callers of run_diff_files() to pass the
same "assume racily clean paths are dirty" option, and makes
"git-add -u" codepath to use that option, to discover and re-add
racily clean _and_ actually clean paths.
We could further optimize on top of this patch to differentiate
the case where the path really needs re-adding (i.e. the content
of the racily clean entry was indeed different) and the case
where only the cached stat information needs to be refreshed
(i.e. the racily clean entry was actually clean), but I do not
think it is worth it.
This patch applies to maint and all the way up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ce_match_stat() can be told:
(1) to ignore CE_VALID bit (used under "assume unchanged" mode)
and perform the stat comparison anyway;
(2) not to perform the contents comparison for racily clean
entries and report mismatch of cached stat information;
using its "option" parameter. Give them symbolic constants.
Similarly, run_diff_files() can be told not to report anything
on removed paths. Also give it a symbolic constant for that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we compare two non-tracked files, or explicitly
specify --no-index, the suggestion to run git-status
is not helpful.
The patch adds a new diff_options bitfield member, no_index, that
is used instead of the special value of -2 of the rev_info field
max_count to indicate that the index is not to be used. This makes
it possible to pass that flag down to diffcore_skip_stat_unmatch(),
which only has one diff_options parameter.
This could even become a cleanup if we removed all assignments of
max_count to a value of -2 (viz. replacement of a magic value with
a self-documenting field name) but I didn't dare to do that so late
in the rc game..
The no_index bit, if set, then tells diffcore_skip_stat_unmatch()
to not account for any skipped stat-mismatches, which avoids the
suggestion to run git-status.
Signed-off-by: Rene Scharfe <rene.scharfe@lsfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After starting to edit a working tree file but later when your edit ends
up identical to the original (this can also happen when you ran a
wholesale regexp replace with something like "perl -i" that does not
actually modify many of the paths), "git diff" between the index and the
working tree outputs many "empty" diffs that show "diff --git" headers
and nothing else, because these paths are stat-dirty. While it was a
way to warn the user that the earlier action of the user made the index
ineffective as an optimization mechanism, it was felt too loud for the
purpose of warning even to experienced users, and also resulted in
confusing people new to git.
This replaces the "empty" diffs with a single warning message at the
end. Having many such paths hurts performance, and you can run
"git-update-index --refresh" to update the lstat(2) information recorded
in the index in such a case. "git-status" does so as a side effect, and
that is more familiar to the end-user, so we recommend it to them.
The change affects only "git diff" that outputs patch text, because that
is where the annoyance of too many "empty" diff is most strongly felt,
and because the warning message can be safely ignored by downstream
tools without getting mistaken as part of the patch. For the low-level
"git diff-files" and "git diff-index", the traditional behaviour is
retained.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ok, I've really held off doing this too damn long, because I'm lazy, and I
was always hoping that somebody else would do it.
But no, people keep asking for it, but nobody actually did anything, so I
decided I might as well bite the bullet, and instead of telling people
they could add a "--follow" flag to "git log" to do what they want to do,
I decided that it looks like I just have to do it for them..
The code wasn't actually that complicated, in that the diffstat for this
patch literally says "70 insertions(+), 1 deletions(-)", but I will have
to admit that in order to get to this fairly simple patch, you did have to
know and understand the internal git diff generation machinery pretty
well, and had to really be able to follow how commit generation interacts
with generating patches and generating the log.
So I suspect that while I was right that it wasn't that hard, I might have
been expecting too much of random people - this patch does seem to be
firmly in the core "Linus or Junio" territory.
To make a long story short: I'm sorry for it taking so long until I just
did it.
I'm not going to guarantee that this works for everybody, but you really
can just look at the patch, and after the appropriate appreciative noises
("Ooh, aah") over how clever I am, you can then just notice that the code
itself isn't really that complicated.
All the real new code is in the new "try_to_follow_renames()" function. It
really isn't rocket science: we notice that the pathname we were looking
at went away, so we start a full tree diff and try to see if we can
instead make that pathname be a rename or a copy from some other previous
pathname. And if we can, we just continue, except we show *that*
particular diff, and ever after we use the _previous_ pathname.
One thing to look out for: the "rename detection" is considered to be a
singular event in the _linear_ "git log" output! That's what people want
to do, but I just wanted to point out that this patch is *not* carrying
around a "commit,pathname" kind of pair and it's *not* going to be able to
notice the file coming from multiple *different* files in earlier history.
IOW, if you use "git log --follow", then you get the stupid CVS/SVN kind
of "files have single identities" kind of semantics, and git log will just
pick the identity based on the normal move/copy heuristics _as_if_ the
history could be linearized.
Put another way: I think the model is broken, but given the broken model,
I think this patch does just about as well as you can do. If you have
merges with the same "file" having different filenames over the two
branches, git will just end up picking _one_ of the pathnames at the point
where the newer one goes away. It never looks at multiple pathnames in
parallel.
And if you understood all that, you probably didn't need it explained, and
if you didn't understand the above blathering, it doesn't really mtter to
you. What matters to you is that you can now do
git log -p --follow builtin-rev-list.c
and it will find the point where the old "rev-list.c" got renamed to
"builtin-rev-list.c" and show it as such.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enhances the attributes mechanism so that external programs
meant for existing GIT_EXTERNAL_DIFF interface can be specifed
per path.
To configure such a custom diff driver, first define a custom
diff driver in the configuration:
[diff "my-c-diff"]
command = <<your command string comes here>>
Then mark the paths that you want to use this custom driver
using the attribute mechanism.
*.c diff=my-c-diff
The intent of this separation is that the attribute mechanism is
used for specifying the type of the contents, while the
configuration mechanism is used to define what needs to be done
to that type of the contents, which would be specific to both
platform and personal taste.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the command line option 'quiet' to tell 'git diff-*'
that we are not interested in the actual diff contents but only
want to know if there is any change. This option automatically
turns --exit-code on, and turns off output formatting, as it
does not make much sense to show the first hit we happened to
have found.
The --quiet option is silently turned off (but --exit-code is
still in effect, so is silent output) if postprocessing filters
such as pickaxe and diff-filter are used. For all practical
purposes I do not think of a reason to want to use these filters
and not viewing the diff output.
The backends have not been taught about the option with this patch.
That is a topic for later rounds.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This introduces a new command-line option: --exit-code. The diff
programs will return 1 for differences, return 0 for equality, and
something else for errors.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When specifying an absolute path, or a relative path pointing outside
the working tree, do not fail, but roll your own diffopt parsing,
and execute a --no-index diff.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff sets the exit status to 0 when no changes were found, to 1
when changes were found, and 2 means error.
We imitate this to be able to use "git diff" in the test scripts.
(Actually, keeping in line with the rest of git, -1 is returned
on error, which corresponds to an exit status 255).
To find out if the diff is not empty, a member called
"found_changes" was introduced in struct diff_options, which is
set in builtin_diff() and fn_out_consume().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this flag and given two paths, git-diff-files behaves as a GNU diff
lookalike (plus the git goodies like --check, colour, etc.). This flag
is also available in git-diff. It also works outside of a git repository.
In addition, if git-diff{,-files} is called without revision or stage
parameter, and with exactly two paths at least one of which is not tracked,
the default is --no-index.
So, you can now say
git diff /etc/inittab /etc/fstab
and it actually works!
This also unifies the duplicated argument parsing between cmd_diff_files()
and builtin_diff_files().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Warning: this changes the semantics.
This makes "git blame" without any positive rev to start digging
from the working tree copy, which is made into a fake commit
whose sole parent is the HEAD.
It also adds --contents <file> option to pretend as if the
working tree copy has the contents of the named file. You can
use '-' to make the command read from the standard input.
If you want the command to start annotating from the HEAD
commit, you need to explicitly give HEAD parameter.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the way diffcore represents an unmerged pair
somewhat. It used to be that entries with mode=0 on both sides
were used to represent an unmerged pair, but now it has an
explicit flag. This is to allow diff-index --cached to report
the entry from the tree when the path is unmerged in the index.
This is used in updating "git reset <tree> -- <path>" to restore
absense of the path in the index from the tree.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is nicer to let the user know when a commit succeeded all the time,
not only the first time. Also the commit sha1 is much more useful than
the tree sha1 in this case.
This patch also introduces a -q switch to supress this message as well
as the summary of created/deleted files.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The idea is that we are interested in renaming into only one path, so
we do not care about renames that happen elsewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch on top of 'next' makes built-in git-cherry handle root
commits.
It moves the static function log-tree.c::diff_root_tree() to
tree-diff.c and makes it more similar to diff_tree_sha1() by
shuffling around arguments and factoring out the call to
log_tree_diff_flush(). Consequently the name is changed to
diff_root_tree_sha1(). It is a version of diff_tree_sha1() that
compares the empty tree (= root tree) against a single 'real' tree.
This function is then used in get_patch_id() to compute patch IDs
for initial commits instead of SEGFAULTing, as the current code
does if confronted with parentless commits.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/diff-stat:
diff --stat: ensure at least one '-' for deletions, and one '+' for additions
diff --stat=width[,name-width]: allow custom diffstat output width.
diff --stat: color output.
diff --stat: allow custom diffstat output width.
This adds two parameters to "diff --stat".
. --stat-width=72 tells that the page should fit on 72-column output.
. --stat-name-width=30 tells that the filename part is limited
to 30 columns.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds DIFF_WHITESPACE color class (default = reverse red) to
colored diff output to let you catch common whitespace errors.
- trailing whitespaces at the end of line
- a space followed by a tab in the indent
Signed-off-by: Junio C Hamano <junkio@cox.net>
Users can request the DIFF_FORMAT_CALLBACK output format to get a callback
consisting of the whole diff_queue_struct.
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this option, the changed words are shown inline. For example,
if a file containing "This is foo" is changed to "This is bar", the diff
will now show "This is " in plain text, "foo" in red, and "bar" in green.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When paging through the output of git-whatchanged, the color cues help to
visually navigate within a diff. However, it is difficult to notice when a
new commit starts, because the commit and log are shown in the "normal"
color. This patch colorizes the 'commit' line, customizable through
diff.colors.commit and defaulting to yellow.
As a side effect, some of the diff color engine (slot enum, get_color) has
become accessible outside of diff.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The Porcelainish has become so much usable as the UI that there
is not much reason people should be using the core programs by
hand anymore. At this point we are better off making the
behaviour of the core programs predictable by keeping them
unaffected by the configuration variables. Otherwise they will
become very hard to use as reliable building blocks.
For example, "git-commit -a" internally uses git-diff-files to
figure out the set of paths that need to be updated in the
index, and we should never allow diff.renames that happens to be
in the configuration to interfere (or slow down the process).
The UI level configuration such as showing renamed diff and
coloring are still honored by the Porcelainish ("git log" family
and "git diff"), but not by the core anymore.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add new item text to struct diff_options.
If set then do not try to detect binary files.
Signed-off-by: Stephan Feder <sf@b-i-t.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* th/diff:
builtin-diff: turn recursive on when defaulting to --patch format.
t4013: note improvements brought by the new output code.
t4013: add format-patch tests.
format-patch: fix diff format option implementation
combine-diff.c: type sanity.
t4013 test updates for new output code.
Fix some more diff options changes.
Fix diff-tree -s
log --raw: Don't descend into subdirectories by default
diff-tree: Use ---\n as a message separator
Print empty line between raw, stat, summary and patch
t4013: add more tests around -c and --cc
whatchanged: Default to DIFF_FORMAT_RAW
Don't xcalloc() struct diffstat_t
Add msg_sep to diff_options
DIFF_FORMAT_RAW is not default anymore
Set default diff output format after parsing command line
Make --raw option available for all diff commands
Merge with_raw, with_stat and summary variables to output_format
t4013: add tests for diff/log family output options.
Add msg_sep variable to struct diff_options. msg_sep is printed after
commit message. Default is "\n", format-patch sets it to "---\n".
This also removes the second argument from show_log() because all
callers derived it from the first argument:
show_log(rev, rev->loginfo, ...
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
DIFF_FORMAT_* are now bit-flags instead of enumerated values.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Call it like this:
unsigned char id[20];
if (diff_flush_patch_id(diff_options, id))
printf("And the patch id is: %s\n", sha1_to_hex(id));
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds -b (--ignore-space-change) and -w (--ignore-all-space) flags to
diff. The main part of the patch is teaching libxdiff about it.
[jc: renamed xdl_line_match() to xdl_recmatch() since the former is used
for different purposes in xpatchi.c which is in the parts of the upstream
source we do not use.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch is a slightly adjusted version of Junio's patch:
http://www.gelato.unsw.edu.au/archives/git/0604/19354.html
However, instead of using a config variable, this patch makes it available
as a diff option.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch touches a couple of files, because it adds options to print a
custom text just after the subject of a commit, and just after the
diffstat.
[jc: made "many dashes" used as the boundary leader into a single
variable, to reduce the possibility of later tweaks to miscount the
number of dashes to break it.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Actually, it is a diff option now, so you can say
git diff --check
to ask if what you are about to commit is a good patch.
[jc: this also would work for fmt-patch, but the point is that
the check is done before making a commit. format-patch is run
from an already created commit, and that is too late to catch
whitespace damaged change.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove the need to pipe git diff through git apply to
get the extended headers summary.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to parse "-U" and "--unified" as part of the GIT_DIFF_OPTS
environment variable, but strangely enough we would _not_ parse them as
part of the normal diff command line (where we only accepted "-u").
This adds parsing of -U and --unified, both with an optional numeric
argument. So now you can just say
git diff --unified=5
to get a unified diff with a five-line context, instead of having to do
something silly like
GIT_DIFF_OPTS="--unified=5" git diff -u
(that silly format does continue to still work, of course).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the user interface and generated diff data format.
* "diff --binary" is used to signal that we want an e-mailable
binary patch. It implies --full-index and -p.
* "apply --allow-binary-replacement" acquired a short synonym
"apply --binary".
* After the "GIT binary patch\n" header line there is a token
to record which binary patch mechanism was used, so that we
can extend it later. Currently there are two mechanisms
defined: "literal" and "delta". The former records the
deflated postimage and the latter records the deflated delta
from the preimage to postimage.
For purely implementation convenience, I added the deflated
length after these "literal/delta" tokens (otherwise the
decoding side needs to guess and reallocate the buffer while
inflating). Improvement patches are very welcomed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git diff(n)" without --base, --ours, etc. defaults to --cc,
which usually is the same as -p unless you are in the middle of
a conflicted merge, just like the shell script version.
"git diff(n) blobA blobB path" complains and dies.
"git diff(n) tree0 tree1 tree2...treeN" does combined diff that
shows a merge of tree1..treeN to result in tree0.
Giving "-c" option to any command that defaults to "--cc" turns
off dense-combined flag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
"diff-index -m" does not mean "do not ignore merges", but means
"pretend missing files match the index".
The previous round tried to address this, but failed because
setup_revisions() ate "-m" flag before the caller had a chance
to intervene.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The second installment to libify diff brothers. The pathname
arguments are checked more strictly than before because we now
use the revision.c::setup_revisions() infrastructure.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is the first installment to libify diff brothers.
The updated diff-files uses revision.c::setup_revisions()
infrastructure to parse its command line arguments, which means
the pathname arguments are checked more strictly than before.
The tests are adjusted to separate possibly missing paths from
the rest of arguments with double-dashes, to show the kosher
way.
As Linus pointed out, renaming diff.c to diff-lib.c was simply
stupid, so I am renaming it back. The new diff-lib.c is to
contain pieces extracted from diff brothers.
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Sun, 16 Apr 2006, Junio C Hamano wrote:
>
> In the mid-term, I am hoping we can drop the generate_header()
> callchain _and_ the custom code that formats commit log in-core,
> found in cmd_log_wc().
Ok, this was nastier than expected, just because the dependencies between
the different log-printing stuff were absolutely _everywhere_, but here's
a patch that does exactly that.
The patch is not very easy to read, and the "--patch-with-stat" thing is
still broken (it does not call the "show_log()" thing properly for
merges). That's not a new bug. In the new world order it _should_ do
something like
if (rev->logopt)
show_log(rev, rev->logopt, "---\n");
but it doesn't. I haven't looked at the --with-stat logic, so I left it
alone.
That said, this patch removes more lines than it adds, and in particular,
the "cmd_log_wc()" loop is now a very clean:
while ((commit = get_revision(rev)) != NULL) {
log_tree_commit(rev, commit);
free(commit->buffer);
commit->buffer = NULL;
}
so it doesn't get much prettier than this. All the complexity is entirely
hidden in log-tree.c, and any code that needs to flush the log literally
just needs to do the "if (rev->logopt) show_log(...)" incantation.
I had to make the combined_diff() logic take a "struct rev_info" instead
of just a "struct diff_options", but that part is pretty clean.
This does change "git whatchanged" from using "diff-tree" as the commit
descriptor to "commit", and I changed one of the tests to reflect that new
reality. Otherwise everything still passes, and my other tests look fine
too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this option, git prepends a diffstat in front of the patch.
Since I really, really do not know what a diffstat of a combined diff
("merge diff") should look like, the diffstat is not generated for these.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now, you can say "git diff --stat" (to get an idea how many changes are
uncommitted), or "git log --stat".
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The way tree-diff was set up assumed we would use only one set
of pathspec during the entire life of the program. Move the
pathspec related static variables out to diff_options structure
so that we can filter commits with one set of paths while show
the actual diffs using different set of paths.
I suspect this breaks blame.c, and makes "git log paths..." to
default to the --full-diff, the latter of which is dealt with
the next commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Nobody except diff-stages used it -- the callers instead filtered
the input to diffcore themselves. Make diff-stages do that as
well and retire diffcore-pathspec.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-diff-* --pickaxe-regex will change the -S pickaxe to match
POSIX extended regular expressions instead of fixed strings.
The regex.h library is a rather stupid interface and I like pcre too, but
with any luck it will be everywhere we will want to run Git on, it being
POSIX.2 and all. I'm not sure if we can expect platforms like AIX to
conform to POSIX.2 or if win32 has regex.h. We might add a flag to
Makefile if there is a portability trouble potential.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Introduce tree-walk.[ch] and move "struct tree_desc" and
associated functions from various places.
Rename DIFF_FILE_CANON_MODE(mode) macro to canon_mode(mode) and
move it to cache.h. This macro returns the canonicalized
st_mode value in the host byte order for files, symlinks and
directories -- to be compared with a tree_desc entry.
create_ce_mode(mode) in cache.h is similar but is intended to be
used for index entries (so it does not work for directories) and
returns the value in the network byte order.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This shows "new file mode XXXX" and "deleted file mode XXXX"
lines like two-way diff-patch output does, by checking the
status from each parent.
The diff-raw output for combined diff is made a bit uglier by
showing diff status letters with each parent. While most of the
case you would see "MM" in the output, an Evil Merge that
touches a path that was added by inheriting from one parent is
possible and it would be shown like these:
$ git-diff-tree --abbrev -c HEAD
2d7ca89675eb8888b0b88a91102f096d4471f09f
::000000 000000 100644 0000000... 0000000... 31dd686... AA b
::000000 100644 100644 0000000... 6c884ae... c6d4fa8... AM d
::100644 100644 100644 4f7cbe7... f8c295c... 19d5d80... RR e
Signed-off-by: Junio C Hamano <junkio@cox.net>
This way, diff-files can make use of it. Also implement the
full suite of what diff_flush_raw() supports just for
consistency. With this, 'diff-tree -c -r --name-status' would
show what is expected.
There is no way to get the historical output (useful for
debugging and low-level Plumbing work) anymore, so tentatively
it makes '-m' to mean "do not combine and show individual diffs
with parents".
diff-files matches diff-tree to produce raw output for -c. For
textual combined diff, use -p -c.
Signed-off-by: Junio C Hamano <junkio@cox.net>
NOTE! This makes "-c" be the default, which effectively means that merges
are never ignored any more, and "-m" is a no-op. So it changes semantics.
I would also like to make "--cc" the default if you do patches, but didn't
actually do that.
The raw output format is not wonderfully pretty, but it's distinguishable
from a "normal patch" in that a normal patch with just one parent has just
one colon at the beginning, while a multi-parent raw diff has <n> colons
for <n> parents.
So now, in the kernel, when you do
git-diff-tree cce0cac125623f9b68f25dd1350f6d616220a8dd
(to see the manual ARM merge that had a conflict in arch/arm/Kconfig), you
get
cce0cac125623f9b68f25dd1350f6d616220a8dd
::100644 100644 100644 4a63a8e2e45247a11c068c6ed66c6e7aba29ddd9 77eee38762d69d3de95ae45dd9278df9b8225e2c 2f61726d2f4b636f6e66696700dbf71a59dad287 arch/arm/Kconfig
ie you see two colons (two parents), then three modes (parent modes
followed by result mode), then three sha1s (parent sha1s followed by
result sha1).
Which is pretty close to the normal raw diff output.
Cool/stupid exercise:
$ git-whatchanged | grep '^::' | cut -f2- | sort |
uniq -c | sort -n | less -S
will show which files have needed the most file-level merge conflict
resolution. Useful? Probably not. But kind of interesting.
For the kernel, it's
....
10 arch/ia64/Kconfig
11 drivers/scsi/Kconfig
12 drivers/net/Makefile
17 include/linux/libata.h
18 include/linux/pci_ids.h
23 drivers/net/Kconfig
24 drivers/scsi/libata-scsi.c
28 drivers/scsi/libata-core.c
43 MAINTAINERS
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have operations to "extract" and "update" a "struct tree_desc", but we
only used them in tree-diff.c and they were static to that file.
But other tree traversal functions can use them to their advantage
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The minimum length of abbreviated object name was hardcoded in
different places to be 4, risking inconsistencies in the future.
Also there were three different "default abbreviation
precision". Use two C preprocessor symbols to clean up this
mess.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This ports the "combined diff" to diff-files so that differences
to the working tree files since stage 2 and stage 3 are shown
the same way as combined diff output from diff-tree for the
merge commit would be shown if the current working tree files
are committed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Building on the previous '-c' (combined) option, '--cc' option
squelches the output further by omitting hunks that consist of
difference with solely one parent.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new option '-c' to diff-tree changes the way a merge commit is
displayed when generating a patch output. It shows a "combined
diff" (hence the option letter 'c'), which looks like this:
$ git-diff-tree --pretty -c -p fec9ebf1 | head -n 18
diff-tree fec9ebf... (from parents)
Merge: 0620db3... 8a263ae...
Author: Junio C Hamano <junkio@cox.net>
Date: Sun Jan 15 22:25:35 2006 -0800
Merge fixes up to GIT 1.1.3
diff --combined describe.c
@@@ +98,7 @@@
return (a_date > b_date) ? -1 : (a_date == b_date) ? 0 : 1;
}
- static void describe(char *arg)
- static void describe(struct commit *cmit, int last_one)
++ static void describe(char *arg, int last_one)
{
+ unsigned char sha1[20];
+ struct commit *cmit;
There are a few things to note about this feature:
- The '-c' option implies '-p'. It also implies '-m' halfway
in the sense that "interesting" merges are shown, but not all
merges.
- When a blob matches one of the parents, we do not show a diff
for that path at all. For a merge commit, this option shows
paths with real file-level merge (aka "interesting things").
- As a concequence of the above, an "uninteresting" merge is
not shown at all. You can use '-m' in addition to '-c' to
show the commit log for such a merge, but there will be no
combined diff output.
- Unlike "gitk", the output is monochrome.
A '-' character in the nth column means the line is from the nth
parent and does not appear in the merge result (i.e. removed
from that parent's version).
A '+' character in the nth column means the line appears in the
merge result, and the nth parent does not have that line
(i.e. added by the merge itself or inherited from another
parent).
The above example output shows that the function signature was
changed from either parents (hence two "-" lines and a "++"
line), and "unsigned char sha1[20]", prefixed by a " +", was
inherited from the first parent.
The code as sent to the list was buggy in few corner cases,
which I have fixed since then.
It does not bother to keep track of and show the line numbers
from parent commits, which it probably should.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When I show transcripts to explain how something works, I often
find myself hand-editing the diff-raw output to shorten various
object names in the output.
This adds --abbrev option to the diff family, which shortens
diff-raw output and diff-tree commit id headers.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise we would end up linking all the unneeded stuff into git-daemon
only to link with git_default_config.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new option, --full-index, is introduced to diff family. This
causes the full object name of pre- and post-images to appear on
the index line of patch formatted output, to be used in
conjunction with --allow-binary-replacement option of git-apply.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update docs and usages regarding '-r' recursive option for git-diff-tree.
Remove '-r' from common diff options, mention it only for git-diff-tree.
Remove one extraneous use of '-r' with git-diff-files in get-merge.sh.
Sync the synopsis and usage string for git-diff-tree.
Signed-off-by: Chris Shoemaker <c.shoemaker at cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes the tree diff functionality independent of the "git-diff-tree"
program, by splitting the core functionality up into a library file.
This will be needed for when we teach git-rev-list to only follow a
specified set of pathnames, rather than the global revision history.
Most of it is a fairly straightforward code move, but it also involves
some calling convention cleanup, and moving some of the static variables
from diff-tree.c into the options structure.
The actual tree change callback routines also become paramterized by the
diff_options structure, allowing the library functionality to do something
else than just show the diff on stdout.
Right now the only user of this functionality remains git-diff-tree
itself.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we updated the marker for new files from 'N' to 'A', we forgot to
notice that the letter is already taken by the All-Or-None mark.
Change the All-Or-None marker to '*' to resolve this conflict.
git-diff-tree -r --diff-filter='R*' -M
shows all the changes (not just renames) that are contained in commits
that have renames, in comparison with:
git-diff-tree -r --diff-filter='R' -M
shows the same set of changes but the diff output are limited only to
renaming changes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When many paths are modified, rename detection takes a lot of time.
The new option -l<num> can be used to disable rename detection when
more than <num> paths are possibly created as renames.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a long overdue clean-up to the code for parsing and passing
diff options. It also tightens some constness issues.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The textual diff generation with built-in '-p' in diff-* brothers has
proven to be useful enough that git-diff-helper outlived its usefulness.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Both Cogito and StGIT prefer to see 'A' for new files. The
current 'N' is visually harder to distinguish from 'M', which is
used for modified files. Prepare the internals to use symbolic
constants to make the change easier.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes the separate "formats" for name and name-with-zero-
termination.
It also removes the difference between HUMAN and MACHINE formats, and
they both become DIFF_FORMAT_RAW, with the difference being just in the
line and inter-filename termination.
It also makes the code easier to understand.
I got tired of maintaining almost duplicated descriptions in
diff-* brothers, both in usage string and documentation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Porcelain layers often want to find only names of changed files,
and even with diff-raw output format they end up having to pick
out only the filename. Support --name-only (and --name-only-z
for xargs -0 and cpio -0 users that want to treat filenames with
embedded newlines sanely) flag to help them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a halfway between debugging aid and a helper to write an
ultra-smart merge scripts. The new option takes a string that
consists of a list of "status" letters, and limits the diff
output to only those classes of changes, with two exceptions:
- A broken pair (aka "complete rewrite"), does not match D
(deleted) or N (created). Use B to look for them.
- The letter "A" in the diff-filter string does not match
anything itself, but causes the entire diff that contains
selected patches to be output (this behaviour is similar to
that of --pickaxe-all for the -S option).
For example,
$ git-rev-list HEAD |
git-diff-tree --stdin -s -v -B -C --diff-filter=BCR
shows a list of commits that have complete rewrite, copy, or
rename.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch updates diff documentation and usage strings:
- clarify the semantics of -R. It is not "output in reverse";
rather, it is "I will feed diff backwards". Semantically
they are different when -C is involved.
- describe -O in usage strings of diff-* brothers. It was
implemented, documented but not described in usage text.
Also it adds -O to diff-helper. Like -S (and unlike -M/-C/-B),
this option can work on sanitized diff-raw output produced by
the diff-* brothers. While we are at it, the call it makes to
diffcore is cleaned up to use the diffcore_std() like everybody
else, and the declaration for the low level diffcore routines
are moved from diff.h (public) to diffcore.h (private between
diff.c and diffcore backends).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The core GIT repository has trees that record regular file mode
in 0664 instead of normalized 0644 pattern. Comparing such a
tree with another tree that records the same file in 0644
pattern without content changes with git-diff-tree causes it to
feed otherwise unmodified pairs to the diff_change() routine,
which triggers a sanity check routine and barfs. This patch
fixes the problem, along with the fix to another caller that
uses unnormalized mode bits to call diff_change() routine in a
similar way.
Without this patch, you will see "fatal error" from diff-tree
when you run git-deltafy-script on the core GIT repository
itself.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A new diffcore filter diffcore-order is introduced. This takes
a text file each of whose line is a shell glob pattern. Patches
that match a glob pattern on an earlier line in the file are
output before patches that match a later line, and patches that
do not match any glob pattern are output last.
A typical orderfile for git project probably should look like
this:
README
Makefile
Documentation
*.h
*.c
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The three diff-* brothers had a sequence of calls into diffcore
that were almost identical. Introduce a new diffcore_std()
function that takes all the necessary arguments to consolidate
it. This will make later enhancements and changing the order of
diffcore application simpler.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This attempts to optimize "diff-tree -[CM] --stdin", which
compares successible tree pairs. This optimization does not
make much sense for other commands in the diff-* brothers.
When reading from --stdin and using rename/copy detection, the
patch makes diff-tree to read the current index file first.
This is done to reuse the optimization used by diff-cache in the
non-cached case. Similarity estimator can avoid expanding a
blob if the index says what is in the work tree has an exact
copy of that blob already expanded.
Another optimization the patch makes is to check only file sizes
first to terminate similarity estimation early. In order for
this to work, it needs a way to tell the size of the blob
without expanding it. Since an obvious way of doing it, which
is to keep all the blobs previously used in the memory, is too
costly, it does so by keeping the filesize for each object it
has already seen in memory.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When --pickaxe-all is given in addition to -S, pickaxe shows the
entire diffs contained in the changeset, not just the diffs for
the filepair that touched the sought-after string. This is
useful to see the changes in context.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This changes the argument of diff_setup() from an integer that
says if we are feeding reversed diff to a bitmask, so that later
global options can be added more easily.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
For later stages to reorder patches, pruning logic and rename detection
logic should not decide which delete to discard (because another entry
said it will take over the file as a rename) until the very end.
Also fix some tests that were assuming the earlier "last one is rename
or keep everything else is copy" semantics of diff-raw format, which no
longer is true.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This changes the diff-raw format again, following the mailing
list discussion. The new format explicitly expresses which one
is a rename and which one is a copy.
The documentation and tests are updated to match this change.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This moves the path selection logic from individual programs to a new
diffcore transformer (diff-tree still needs to have its own for
performance reasons). Also the header printing code in diff-tree was
tweaked not to produce anything when pickaxe is in effect and there is
nothing interesting to report. An interesting example is the following
in the GIT archive itself:
$ git-whatchanged -p -C -S'or something in a real script'
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update the diff-raw format as Linus and I discussed, except that
it does not use sequence of underscore '_' letters to express
nonexistence. All '0' mode is used for that purpose instead.
The new diff-raw format can express rename/copy, and the earlier
restriction that -M and -C _must_ be used with the patch format
output is no longer necessary. The patch makes -M and -C flags
independent of -p flag, so you need to say git-whatchanged -M -p
to get the diff/patch format.
Updated are both documentations and tests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This does not actually supress the extra headers when pickaxe is
used, but prepares enough support for diff-tree to implement it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This steals the "pickaxe" feature from JIT and make it available
to the bare Plumbing layer. From the command line, the user
gives a string he is intersted in.
Using the diff-core infrastructure previously introduced, it
filters the differences to limit the output only to the diffs
between <src> and <dst> where the string appears only in one but
not in the other. For example:
$ ./git-rev-list HEAD | ./git-diff-tree -Sdiff-tree-helper --stdin -M
would show the diffs that touch the string "diff-tree-helper".
In real software-archaeologist application, you would typically
look for a few to several lines of code and see where that code
came from.
The "pickaxe" module runs after "rename/copy detection" module,
so it even crosses the file rename boundary, as the above
example demonstrates.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This cleans up the way calls are made into the diff core from diff-tree
family and diff-helper. Earlier, these programs had "if
(generating_patch)" sprinkled all over the place, but those ugliness are
gone and handled uniformly from the diff core, even when not generating
patch format.
This also allowed diff-cache and diff-files to acquire -R
(reverse) option to generate diff in reverse. Users of
diff-tree can swap two trees easily so I did not add -R there.
[ Linus' note: I'll add -R to "diff-tree" too, since a "commit
diff" doesn't have another tree to switch around: the other
tree is always the parent(s) of the commit ]
Also -M<digits-as-mantissa> suggestion made by Linus has been
implemented.
Documentation updates are also included.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This rips out the rename detection engine from diff-helper and moves it
to the diff core, and updates the internal calling convention used by
diff-tree family into the diff core. In order to give the same option
name to diff-tree family as well as to diff-helper, I've changed the
earlier diff-helper '-r' option to '-M' (stands for Move; sorry but the
natural abbreviation 'r' for 'rename' is already taken for 'recursive').
Although I did a fair amount of test with the git-diff-tree with
existing rename commits in the core GIT repository, this should still be
considered beta (preview) release. This patch depends on the diff-delta
infrastructure just committed.
This implements almost everything I wanted to see in this series of
patch, except a few minor cleanups in the calling convention into diff
core, but that will be a separate cleanup patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds a framework and a stub implementation of rename
detection to diff-helper program.
The current stub code is just enough to detect pure renames in
diff-tree output and not fancier. The plan is perhaps to use
the same delta code when Nico's delta storage patch is merged
for similarity evaluation purposes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It used to be that diff-tree needed helper support to parse its
raw output to generate diffs, but these days git-diff-* family
produces the same output and the helper is not tied to diff-tree
anymore. Drop "tree" from its name.
This commit is done separately to record just the rename and no
file content changes. The changes in the renamed files are recorded
in the next commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Bundled with the changes in the unrenamed files.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
This patch optimizes "diff-cache -p --cached" by avoiding to
inflate blobs into temporary files when the blob recorded in the
cache matches the corresponding file in the work tree. The file
in the work tree is passed as the comparison source in such a
case instead.
This optimization kicks in only when we have already read the
cache this optimization and this is deliberate. Especially,
diff-tree does not use this code, because changes are contained
in small number of files relative to the project size most of
the time, and reading cache is so expensive for a large project
that the cost of reading it outweighs the savings by not
inflating blobs.
Also this patch cleans up the structure passed from diff clients
by removing one unused structure member.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This introduces three public functions for diff-cache and friends can
use to call out to the GIT_EXTERNAL_DIFF program when they wish to.
A normal "add/remove/change" entry is turned into 7-parameter process
invocation of GIT_EXTERNAL_DIFF program as before. In addition, the
program can now be called with a single parameter when diff-cache and
friends want to report an unmerged path.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This reworks the diff-tree-helper and show-diff to further make external
diff command interface simpler.
These commands now honor GIT_EXTERNAL_DIFF environment variable which
can point at an arbitrary program that takes 7 parameters:
name file1 file1-sha1 file1-mode file2 file2-sha1 file2-mode
The parameters for an external diff command are as follows:
name this invocation of the command is to emit diff
for the named cache/tree entry.
file1 pathname that holds the contents of the first
file. This can be a file inside the working
tree, or a temporary file created from the blob
object, or /dev/null. The command should not
attempt to unlink it -- the temporary is
unlinked by the caller.
file1-sha1 sha1 hash if file1 is a blob object, or "."
otherwise.
file1-mode mode bits for file1, or "." for a deleted file.
If GIT_EXTERNAL_DIFF environment variable is not set, the
default is to invoke diff with the set of parameters old
show-diff used to use. This built-in implementation honors the
GIT_DIFF_CMD and GIT_DIFF_OPTS environment variables as before.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With this patch, the non-core'ish part of show-diff command that
invokes an external "diff" comand to obtain patches is split
into a separate file. The next patch will introduce a new
command, diff-tree-helper, which uses this common diff interface
to format diff-tree and diff-cache output into a patch form.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
René Scharfe
Junio C Hamano
Jeff King
Michael J Gruber
Johan Herland
Nguyễn Thái Ngọc Duy
Kevin Ballard
Jens Lehmann
Matthieu Moy
Axel Bonnet
Bo Yang
Gary V. Vaughan
Thomas Rast
Bert Wesarg
Johannes Schindelin
Keith Cascio
Stephan Beyer
Shawn O. Pearce
Heikki Orsila
Dmitry Potapov
Adam Simpkins
Daniel Barkalow
Matthias Kestenholz
Linus Torvalds
Wincent Colaiuta
Pierre Habouzit
Junio C Hamano
Alex Riesen
Nicolas Pitre
Stephan Feder
Timo Hirvonen
Sean
Linus Torvalds
Petr Baudis
Chris Shoemaker
Linus Torvalds