Commits 404ebceda0 ("dir: also check directories for matching
pathspecs", 2019-09-17) and 89a1f4aaf7 ("dir: if our pathspec might
match files under a dir, recurse into it", 2019-09-17) added calls to
match_pathspec() and do_match_pathspec() passing along their pathspec
parameter. Both match_pathspec() and do_match_pathspec() assume the
pathspec argument they are given is non-NULL. It turns out that
unpack-tree.c's verify_clean_subdirectory() calls read_directory() with
pathspec == NULL, and it is possible on case insensitive filesystems for
that NULL to make it to these new calls to match_pathspec() and
do_match_pathspec(). Add appropriate checks on the NULLness of pathspec
to avoid a segfault.
In case the negation throws anyone off (one of the calls was to
do_match_pathspec() while the other was to !match_pathspec(), yet no
negation of the NULLness of pathspec is used), there are two ways to
understand the differences:
* The code already handled the pathspec == NULL cases before this
series, and this series only tried to change behavior when there was
a pathspec, thus we only want to go into the if-block if pathspec is
non-NULL.
* One of the calls is for whether to recurse into a subdirectory, the
other is for after we've recursed into it for whether we want to
remove the subdirectory itself (i.e. the subdirectory didn't match
but something under it could have). That difference in situation
leads to the slight differences in logic used (well, that and the
slightly unusual fact that we don't want empty pathspecs to remove
untracked directories by default).
Denton found and analyzed one issue and provided the patch for the
match_pathspec() call, SZEDER figured out why the issue only reproduced
for some folks and not others and provided the testcase, and I looked
through the remainder of the series and noted the do_match_pathspec()
call that should have the same check.
Co-authored-by: Denton Liu <liu.denton@gmail.com>
Co-authored-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct the pointer arithmetic in adjust_dirname_case() so that it calls
find_dir_entry() with the correct string length. Previously passing in
"dir1/foo" would pass a length of 6 instead of the correct 4. This resulted in
find_dir_entry() never finding the entry and so the subsequent memcpy that would
fold the name to the version with the correct case never executed.
Add a test to validate the corrected behavior with name folding of directories.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the symlink tests check an either-or case using the
"||". This is not wrong, but fools --chain-lint into
thinking the &&-chain is broken (in fact, there is no &&
chain here).
We can solve this by wrapping the "||" inside a {} block.
This is a bit more verbose, but this construct is rare, and
the {} block helps call attention to it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit baa37bff ("mv: allow renaming to fix case on case
insensitive filesystems", 08-05-2014), the 'git mv' command has
been able to rename a file, to one which differs only in case,
on a case insensitive filesystem.
This results in the 'rename (case change)' test, which used to fail
prior to this commit, to now (unexpectedly) pass. Mark this test as
passing.
[jc: Ramsay's tests on Cygwin, Eric's on Mac OS X]
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Tested-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.precomposeunicode was introduced in 76759c7d,
it was set to false on a unicode decomposing file system like HFS+
to be compatible with older versions of Git.
The Mac OS users need to find out that this configuration exist
and change it manually from false to true.
A smoother workflow can be achieved,
so set core.precomposeunicode to true on a decomposing file system.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use one TAB for indentation and remove empty lines
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test case "add (with different case)" indicates a
known breakage when run on a case insensitive file system.
The test is invalid for case sensitive file system, it will always fail.
Check the precondition CASE_INSENSITIVE_FS before running it.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test case has passed since this commit:
commit 0047dd2fd1
Author: Steffen Prohaska <prohaska@zib.de>
Date: Thu May 15 07:19:54 2008 +0200
t0050: Fix merge test on case sensitive file systems
Remove the known breakage by using test_expect_success
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
UTF8 behaviour of the filesystem (conversion from nfd to nfc) plays a
role in several tests and is tested in several tests. Therefore, move
the test from t0050 into the test lib and use the prerequisite in t0050.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike bash and ksh, dash passes through hexadecimal \xcc escapes.
So when run with dash, these tests *pass* (since '\xcc' is a perfectly
reasonable filename) but they are not testing what was intended.
Use octal escapes instead, in the spirit of v1.6.1-rc1~55^2
(2008-11-09).
Reported-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test is to prepare an empty file "camelcase" in the index, remove
and replace it with another file "CamelCase" with "1" as its contents
in the working tree, and add it to the index, in a repository configured
to be case insensitive.
However, the test actually checked ls-files knows about a pathname that
matches "camelcase" case insensitively. It didn't check if the added
contents actually was the updated one.
Mark the test as non-working.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were some uses of 'say' inside test_expect_success. But if the tests
were not run in verbose mode, this message went to /dev/null. Pull them out
of test_expect_success.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".
This is useful to
- make sure the test does not fail because of a signal,
e.g. SIGSEGV, and
- advertise the use of "test_must_fail" for new tests.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a case sensitive filesystem, "git reset --hard" might refuse to
overwrite a file whose name differs only by case, even if
core.ignorecase is set. It is not clear which circumstances cause this
behavior. This commit simply works around the problem by removing
the case changing file before running "git reset --hard".
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add should recognize if a file is added with a different case and add
the file using its original name.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Case insensitive file handling is only active when
core.ignorecase = true. Hence, we need to set it to give the tests
in t0050 a chance to succeed. Setting core.ignorecase explicitly
allows to test some aspects of case handling even on case sensitive file
systems.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Verify if core.ignorecase is automatically set to 'true' during
repository initialization if the file system is case insensitive,
and unset or 'false' otherwise.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older versions of perl (such as 5.005) don't understand -CO, nor
do they understand the "U" pack specifier. Instead of using perl,
let's just printf the binary bytes we are interested in.
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git has difficulties on file systems that do not properly
distinguish case or modify filenames in unexpected ways. The two
major examples are Windows and Mac OS X. Both systems preserve
case of file names but do not distinguish between filenames that
differ only by case. Simple operations such as "git mv" or
"git merge" can fail unexpectedly. In addition, Mac OS X normalizes
unicode, which make git's life even harder.
This commit adds tests that currently fail but should pass if
file system as decribed above are fully supported. The test need
to be run on Windows and Mac X as they already pass on Linux.
Mitch Tishmack is the original author of the tests for unicode
normalization.
[jc: fixed-up so that it will use test_expect_success to test
on sanely behaving filesystems.]
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren
Ben Peart
Jeff King
Ramsay Jones
Torsten Bögershausen
Michael J Gruber
Junio C Hamano
Jonathan Nieder
Johannes Sixt
Nanako Shiraishi
Stephan Beyer
Steffen Prohaska