The JUnit XML format lends itself to be presented in a powerful UI,
where you can drill down to the information you are interested in very
quickly.
For test failures, this usually means that you want to see the detailed
trace of the failing tests.
With Travis CI, we passed the `--verbose-log` option to get those
traces. However, that seems excessive, as we do not need/use the logs in
almost all of those cases: only when a test fails do we have a way to
include the trace.
So let's do something different when using Azure DevOps: let's run all
the tests with `--quiet` first, and only if a failure is encountered,
try to trace the commands as they are executed.
Of course, we cannot turn on `--verbose-log` after the fact. So let's
just re-run the test with all the same options, adding `--verbose-log`.
And then munging the output file into the JUnit XML on the fly.
Note: there is an off chance that re-running the test in verbose mode
"fixes" the failures (and this does happen from time to time!). That is
a possibility we should be able to live with. Ideally, we would label
this as "Passed upon rerun", and Azure Pipelines even know about that
outcome, but it is not available when using the JUnit XML format for
now:
https://github.com/Microsoft/azure-pipelines-agent/blob/master/src/Agent.Worker/TestResults/JunitResultReader.cs
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will come in handy when publishing the results of Git's test suite
during an automated Azure DevOps run.
Note: we need to make extra sure that invalid UTF-8 encoding is turned
into valid UTF-8 (using the Replacement Character, \uFFFD) because
t9902's trace contains such invalid byte sequences, and the task in the
Azure Pipeline that uploads the test results would refuse to do anything
if it was asked to parse an .xml file with invalid UTF-8 in it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately, we have a few flaky tests, whose failures tend to be
hard to reproduce. We've found that the best we can do to reproduce
such a failure is to run the test script repeatedly while the machine
is under load, and wait in the hope that the load creates enough
variance in the timing of the test's commands that a failure is
evenually triggered. I have a command to do that, and I noticed that
two other contributors have rolled their own scripts to do the same,
all choosing slightly different approaches.
To help reproduce failures in flaky tests, introduce the '--stress'
option to run a test script repeatedly in multiple parallel jobs until
one of them fails, thereby using the test script itself to increase
the load on the machine.
The number of parallel jobs is determined by, in order of precedence:
the number specified as '--stress=<N>', or the value of the
GIT_TEST_STRESS_LOAD environment variable, or twice the number of
available processors (as reported by the 'getconf' utility), or 8.
Make '--stress' imply '--verbose -x --immediate' to get the most
information about rare failures; there is really no point in spending
all the extra effort to reproduce such a failure, and then not know
which command failed and why.
To prevent the several parallel invocations of the same test from
interfering with each other:
- Include the parallel job's number in the name of the trash
directory and the various output files under 't/test-results/' as
a '.stress-<Nr>' suffix.
- Add the parallel job's number to the port number specified by the
user or to the test number, so even tests involving daemons
listening on a TCP socket can be stressed.
- Redirect each parallel test run's verbose output to
't/test-results/$TEST_NAME.stress-<nr>.out', because dumping the
output of several parallel running tests to the terminal would
create a big ugly mess.
For convenience, print the output of the failed test job at the end,
and rename its trash directory to end with the '.stress-failed'
suffix, so it's easy to find in a predictable path (OTOH, all absolute
paths recorded in the trash directory become invalid; we'll see
whether this causes any issues in practice). If, in an unlikely case,
more than one jobs were to fail nearly at the same time, then print
the output of all failed jobs, and rename the trash directory of only
the last one (i.e. with the highest job number), as it is the trash
directory of the test whose output will be at the bottom of the user's
terminal.
Based on Jeff King's 'stress' script.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A later patch in this series will need to know the path to the trash
directory early in 'test-lib.sh', but $TRASH_DIRECTORY is set much
later.
Set $TRASH_DIRECTORY earlier, where the other test-specific path
variables are set.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two places where we strip off any leading path components
and the '.sh' suffix from the test script's pathname, and there are
four places where we construct the name of the 't/test-results'
directory or the name of various test-specific files in there. The
last patch in this series will add even more.
Factor these out into helper variables to avoid repeating ourselves.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'test-lib.sh' looks for the presence of certain options like '--tee'
and '--verbose-log', so it can execute the test script again to save
its standard output and error. It looks for '--valgrind' as well, to
set up some Valgrind-specific stuff. These all happen before the
actual option parsing loop, and the conditions looking for these
options look a bit odd, too. They are not completely correct, either,
because in a bogus invocation like './t1234-foo.sh -r --tee' they
recognize '--tee', although it should be handled as the required
argument of the '-r' option. This patch series will add two more
options to look out for early, and, in addition, will have to extract
these options' stuck arguments (i.e. '--opt=arg') as well.
So let's move the option parsing loop and the couple of related
conditions following it earlier in 'test-lib.sh', before the place
where the test script is executed again for '--tee' and its friends.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'test-lib.sh' looks for the presence of certain options like '--tee'
and '--verbose-log', so it can execute the test script again to save
its standard output and error, and to do so it needs the original
command line options the test was invoked with.
The next patch is about to move the option parsing loop earlier in
'test-lib.sh', but it is implemented using 'shift' in a while loop,
effecively destroying "$@" by the end of the option parsing. Not
good.
As a preparatory step, turn that option parsing loop into a 'for opt
in "$@"' loop to preserve "$@" intact while iterating over the
options, and taking extra care to handle the '-r' option's required
argument (or the lack thereof).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of our test scripts, 't1510-repo-setup.sh' [1], still can't be
reliably run with '-x' tracing enabled, unless it's executed with a
Bash version supporting BASH_XTRACEFD (since v4.1). We have a lengthy
condition to check the version of the shell running the test script,
and disable tracing if it's not executed with a suitable Bash version
[2].
Move this check out from the option parsing loop, so other options can
imply '-x' by setting 'trace=t', without missing this Bash version
check.
[1] 5827506928 (t1510-repo-setup: mark as untraceable with '-x',
2018-02-24)
[2] 5fc98e79fc (t: add means to disable '-x' tracing for individual
test scripts, 2018-02-24)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now if a test script receives SIGTERM or SIGHUP (e.g., because a
test was hanging and the user 'kill'-ed it or simply closed the
terminal window the test was running in), the shell exits immediately.
This can be annoying if the test script did any global setup, like
starting apache or git-daemon, as it will not have an opportunity to
clean up after itself. A subsequent run of the test won't be able to
start its own daemon, and will either fail or skip the tests.
Instead, let's trap SIGTERM and SIGHUP as well to make sure we do a
clean shutdown, and just chain it to a normal exit (which will trigger
any cleanup).
This patch follows suit of da706545f7 (t: translate SIGINT to an exit,
2015-03-13), and even stole its commit message as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of our test scripts, 't1510-repo-setup.sh' [1], still can't be
reliably run with '-x' tracing enabled, unless it's executed with a
Bash version supporting BASH_XTRACEFD (since v4.1). We have a lengthy
condition to check the version of the shell running the test script,
and disable tracing if it's not executed with a suitable Bash version
[2].
This condition uses non-portable shell array accesses to easily get
Bash's major and minor version number. This didn't seem to be
problematic, because the simple commands expanding those array
accesses are only executed when the test script is actually run with
Bash. When run with Dash, the only shell I have at hand that doesn't
support shell arrays, there are no issues, as it apparently skips
right over the non-executed simple commands without noticing the
non-supported constructs.
Alas, it has been reported that NetBSD's /bin/sh does complain about
them:
./test-lib.sh: 327: Syntax error: Bad substitution
where line 327 contains the first ${BASH_VERSINFO[0]} array access.
To my understanding both shells are right and conform to POSIX,
because the standard allows both behaviors by stating the following
under '2.8.1 Consequences of Shell Errors' [3]:
"An expansion error is one that occurs when the shell expansions
define in wordexp are carried out (for example, "${x!y}", because
'!' is not a valid operator); an implementation may treat these as
syntax errors if it is able to detect them during tokenization,
rather than during expansion."
Avoid this issue with NetBSD's /bin/sh (and potentially with other,
less common shells) by hiding the shell array syntax behind 'eval'
that is only executed with Bash.
[1] 5827506928 (t1510-repo-setup: mark as untraceable with '-x',
2018-02-24)
[2] 5fc98e79fc (t: add means to disable '-x' tracing for individual
test scripts, 2018-02-24)
[3] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_08_01
Reported-by: Max Kirillov <max@max630.net>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the functions in our test library check that they were invoked
properly with conditions like this:
test "$#" = 2 ||
error "bug in the test script: not 2 parameters to test-expect-success"
If this particular condition is triggered, then 'error' will abort the
whole test script with a bold red error message [1] right away.
However, under certain circumstances the test script will be aborted
completely silently, namely if:
- a similar condition in a test helper function like
'test_line_count' is triggered,
- which is invoked from the test script's "main" shell [2],
- and the test script is run manually (i.e. './t1234-foo.sh' as
opposed to 'make t1234-foo.sh' or 'make test') [3]
- and without the '--verbose' option,
because the error message is printed from within 'test_eval_', where
standard output is redirected either to /dev/null or to a log file.
The only indication that something is wrong is that not all tests in
the script are executed and at the end of the test script's output
there is no "# passed all N tests" message, which are subtle and can
easily go unnoticed, as I had to experience myself.
Send these "bug in the test script" error messages directly to the
test scripts standard error and thus to the terminal, so those bugs
will be much harder to overlook. Instead of updating all ~20 such
'error' calls with a redirection, let's add a BUG() function to
'test-lib.sh', wrapping an 'error' call with the proper redirection
and also including the common prefix of those error messages, and
convert all those call sites [4] to use this new BUG() function
instead.
[1] That particular error message from 'test_expect_success' is
printed in color only when running with or without '--verbose';
with '--tee' or '--verbose-log' the error is printed without
color, but it is printed to the terminal nonetheless.
[2] If such a condition is triggered in a subshell of a test, then
'error' won't be able to abort the whole test script, but only the
subshell, which in turn causes the test to fail in the usual way,
indicating loudly and clearly that something is wrong.
[3] Well, 'error' aborts the test script the same way when run
manually or by 'make' or 'prove', but both 'make' and 'prove' pay
attention to the test script's exit status, and even a silently
aborted test script would then trigger those tools' usual
noticable error messages.
[4] Strictly speaking, not all those 'error' calls need that
redirection to send their output to the terminal, see e.g.
'test_expect_success' in the opening example, but I think it's
better to be consistent.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the "test installed Git" mode of our test suite to work better.
* js/test-git-installed:
tests: explicitly use `git.exe` on Windows
tests: do not require Git to be built when testing an installed Git
t/lib-gettext: test installed git-sh-i18n if GIT_TEST_INSTALLED is set
tests: respect GIT_TEST_INSTALLED when initializing repositories
tests: fix GIT_TEST_INSTALLED's PATH to include t/helper/
Our testing framework uses a special i18n "poisoned localization"
feature to find messages that ought to stay constant but are
incorrectly marked to be translated. This feature has been made
into a runtime option (it used to be a compile-time option).
* ab/dynamic-gettext-poison:
Makefile: ease dynamic-gettext-poison transition
i18n: make GETTEXT_POISON a runtime option
On Windows, when we refer to `/an/absolute/path/to/git`, it magically
resolves `git.exe` at that location. Except if something of the name
`git` exists next to that `git.exe`. So if we call `$BUILD_DIR/git`, it
will find `$BUILD_DIR/git.exe` *only* if there is not, say, a directory
called `$BUILD_DIR/git`.
Such a directory, however, exists in Git for Windows when building with
Visual Studio (our Visual Studio project generator defaults to putting
the build files into a directory whose name is the base name of the
corresponding `.exe`).
In the bin-wrappers/* scripts, we already take pains to use `git.exe`
rather than `git`, as this could pick up the wrong thing on Windows
(i.e. if there exists a `git` file or directory in the build directory).
Now we do the same in the tests' start-up code.
This also helps when testing an installed Git, as there might be even
more likely some stray file or directory in the way.
Note: the only way we can record whether the `.exe` suffix is by writing
it to the `GIT-BUILD-OPTIONS` file and sourcing it at the beginning of
`t/test-lib.sh`. This is not a requirement introduced by this patch, but
we move the call to be able to use the `$X` variable that holds the file
extension, if any.
Note also: the many, many calls to `git this` and `git that` are
unaffected, as the regular PATH search will find the `.exe` files on
Windows (and not be confused by a directory of the name `git` that is
in one of the directories listed in the `PATH` variable), while
`/path/to/git` would not, per se, know that it is looking for an
executable and happily prefer such a directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We really only need the test helpers to be built in the worktree in that
case, but that is not what we test for.
On the other hand it is a perfect opportunity to verify that
`GIT_TEST_INSTALLED` points to a working Git.
So let's test the appropriate Git executable. While at it, also adjust
the error message in the `GIT_TEST_INSTALLED` case.
This patch is best viewed with `-w --patience`.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We really need to be able to find the test helpers... Really. This
change was forgotten when we moved the test helpers into t/helper/
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation to the day when we can deprecate and remove the
"rebase -p", make sure we can skip and later remove tests for
it.
* js/rebase-p-tests:
tests: optionally skip `git rebase -p` tests
t3418: decouple test cases from a previous `rebase -p` test case
t3404: decouple some test cases from outcomes of previous test cases
Change the GETTEXT_POISON compile-time + runtime GIT_GETTEXT_POISON
test parameter to only be a GIT_TEST_GETTEXT_POISON=<non-empty?>
runtime parameter, to be consistent with other parameters documented
in "Running tests with special setups" in t/README.
When I added GETTEXT_POISON in bb946bba76 ("i18n: add GETTEXT_POISON
to simulate unfriendly translator", 2011-02-22) I was concerned with
ensuring that the _() function would get constant folded if NO_GETTEXT
was defined, and likewise that GETTEXT_POISON would be compiled out
unless it was defined.
But as the benchmark in my [1] shows doing a one-off runtime
getenv("GIT_TEST_[...]") is trivial, and since GETTEXT_POISON was
originally added the GIT_TEST_* env variables have become the common
idiom for turning on special test setups.
So change GETTEXT_POISON to work the same way. Now the
GETTEXT_POISON=YesPlease compile-time option is gone, and running the
tests with GIT_TEST_GETTEXT_POISON=[YesPlease|] can be toggled on/off
without recompiling.
This allows for conditionally amending tests to test with/without
poison, similar to what 859fdc0c3c ("commit-graph: define
GIT_TEST_COMMIT_GRAPH", 2018-08-29) did for GIT_TEST_COMMIT_GRAPH. Do
some of that, now we e.g. always run the t0205-gettext-poison.sh test.
I did enough there to remove the GETTEXT_POISON prerequisite, but its
inverse C_LOCALE_OUTPUT is still around, and surely some tests using
it can be converted to e.g. always set GIT_TEST_GETTEXT_POISON=.
Notes on the implementation:
* We still compile a dedicated GETTEXT_POISON build in Travis
CI. Perhaps this should be revisited and integrated into the
"linux-gcc" build, see ae59a4e44f ("travis: run tests with
GIT_TEST_SPLIT_INDEX", 2018-01-07) for prior art in that area. Then
again maybe not, see [2].
* We now skip a test in t0000-basic.sh under
GIT_TEST_GETTEXT_POISON=YesPlease that wasn't skipped before. This
test relies on C locale output, but due to an edge case in how the
previous implementation of GETTEXT_POISON worked (reading it from
GIT-BUILD-OPTIONS) wasn't enabling poison correctly. Now it does,
and needs to be skipped.
* The getenv() function is not reentrant, so out of paranoia about
code of the form:
printf(_("%s"), getenv("some-env"));
call use_gettext_poison() in our early setup in git_setup_gettext()
so we populate the "poison_requested" variable in a codepath that's
won't suffer from that race condition.
* We error out in the Makefile if you're still saying
GETTEXT_POISON=YesPlease to prompt users to change their
invocation.
* We should not print out poisoned messages during the test
initialization itself to keep it more readable, so the test library
hides the variable if set in $GIT_TEST_GETTEXT_POISON_ORIG during
setup. See [3].
See also [4] for more on the motivation behind this patch, and the
history of the GETTEXT_POISON facility.
1. https://public-inbox.org/git/871s8gd32p.fsf@evledraar.gmail.com/
2. https://public-inbox.org/git/20181102163725.GY30222@szeder.dev/
3. https://public-inbox.org/git/20181022202241.18629-2-szeder.dev@gmail.com/
4. https://public-inbox.org/git/878t2pd6yu.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our test scripts can now take the '-V' option as a synonym for the
'--verbose-log' option.
* sg/test-verbose-log:
test-lib: introduce the '-V' short option for '--verbose-log'
The `--preserve-merges` mode of the `rebase` command is slated to be
deprecated soon, as the more powerful `--rebase-merges` mode is
available now, and the latter was designed with the express intent to
address the shortcomings of `--preserve-merges`' design (e.g. the
inability to reorder commits in an interactive rebase).
As such, we will eventually even remove the `--preserve-merges` support,
and along with it, its tests.
In preparation for this, and also to allow the Windows phase of our
automated tests to save some well-needed time when running the test
suite, this commit introduces a new prerequisite REBASE_P, which can be
forced to being unmet by setting the environment variable
`GIT_TEST_SKIP_REBASE_P` to any non-empty string.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'--verbose-log' is one of the most useful and thus most frequently
used test options, but due to its length it's a pain to type on the
command line.
Let's introduce the corresponding short option '-V' to save some
keystrokes.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some environment variables that control the runtime options of Git
used during tests are getting renamed for consistency.
* bp/rename-test-env-var:
t0000: do not get self-test disrupted by environment warnings
preload-index: update GIT_FORCE_PRELOAD_TEST support
read-cache: update TEST_GIT_INDEX_VERSION support
fsmonitor: update GIT_TEST_FSMONITOR support
preload-index: use git_env_bool() not getenv() for customization
t/README: correct spelling of "uncommon"
The test framework test-lib.sh itself would want to give warnings
and hints, e.g. when it sees a deprecated environment variable is in
use that we want to encourage users to migrate to another variable.
The self-test of test framework done in t0000 however do not expect
to see these warnings and hints, so depending on the settings of
environment variables, a running test may or may not produce these
messages to the standard error output, breaking the expectations of
self-test test framework does on itself. Here is what we see:
$ TEST_GIT_INDEX_VERSION=4 sh t0000-basic.sh -i -v
...
'err' is not empty, it contains:
warning: TEST_GIT_INDEX_VERSION is now GIT_TEST_INDEX_VERSION
hint: set GIT_TEST_INDEX_VERSION too during the transition period
not ok 5 - pretend we have a fully passing test suite
The following quick attempt to work it around does not work, because
some tests in t0000 do want to see expected errors from the test
framework itself.
t/t0000-basic.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh
index 850f651e4e..88c6ed4696 100755
--- a/t/t0000-basic.sh
+++ b/t/t0000-basic.sh
@@ -88,7 +88,7 @@ _run_sub_test_lib_test_common () {
'
# Point to the t/test-lib.sh, which isn't in ../ as usual
- . "\$TEST_DIRECTORY"/test-lib.sh
+ . "\$TEST_DIRECTORY"/test-lib.sh >/dev/null 2>&1
EOF
cat >>"$name.sh" &&
chmod +x "$name.sh" &&
There are a few possible ways to work this around:
* We could strip the warning: and hint: unconditionally from the
error output before the error messages are checked in the
self-test (helper functions check_sub_test_lib_test_err and
check_sub_test_lib_test); the problem with this approach is that
it will make it impossible to write self-tests to ensure that
right warnings and hints are given.
* We could force a sane environment settings before the test helper
_run_sub_test_lib_test_common dot-sources test-lib.sh; the
problem with this approach is that _run_sub_test_lib_test_common
now needs to be aware of what pairs of environment variables are
checked in test-lib.sh using check_var_migration helper.
The final patch I came up with is probably the solution that is
least bad. Set a variable to tell test-lib.sh that we are running
a self-test, so that various pieces in test-lib.sh can react to keep
the output stable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename GIT_FORCE_PRELOAD_TEST to GIT_TEST_PRELOAD_INDEX for consistency with
the other GIT_TEST_ special setups and properly document its use.
Add logic in t/test-lib.sh to give a warning when the old variable is set to
let people know they need to update their environment to use the new
variable.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename TEST_GIT_INDEX_VERSION to GIT_TEST_INDEX_VERSION for consistency with
the other GIT_TEST_ special setups and properly document its use.
Add logic in t/test-lib.sh to give a warning when the old variable is set to
let people know they need to update their environment to use the new
variable.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename GIT_FSMONITOR_TEST to GIT_TEST_FSMONITOR for consistency with the
other GIT_TEST_ special setups and properly document its use.
Add logic in t/test-lib.sh to give a warning when the old variable is set to
let people know they need to update their environment to use the new
variable.
Remove the outdated instructions on how to run the test suite utilizing
fsmonitor now that it is properly documented in t/README.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unpack_trees() API used in checking out a branch and merging
walks one or more trees along with the index. When the cache-tree
in the index tells us that we are walking a tree whose flattened
contents is known (i.e. matches a span in the index), as linearly
scanning a span in the index is much more efficient than having to
open tree objects recursively and listing their entries, the walk
can be optimized, which is done in this topic.
* nd/unpack-trees-with-cache-tree:
Document update for nd/unpack-trees-with-cache-tree
cache-tree: verify valid cache-tree in the test suite
unpack-trees: add missing cache invalidation
unpack-trees: reuse (still valid) cache-tree from src_index
unpack-trees: reduce malloc in cache-tree walk
unpack-trees: optimize walking same trees with cache-tree
unpack-trees: add performance tracing
trace.h: support nested performance tracing
The "head -c BYTES" option is non-portable (not in POSIX[1]). Change
such invocations to use the test_copy_bytes wrapper added in
48860819e8 ("t9300: factor out portable "head -c" replacement",
2016-06-30).
This fixes a test added in 9d2e330b17 ("ewah_read_mmap: bounds-check
mmap reads", 2018-06-14), which has been breaking
t5310-pack-bitmaps.sh on OpenBSD since 2.18.0. The OpenBSD ports
already have a similar workaround after their upgrade to 2.18.0[2].
I have not tested this on IRIX, but according to 4de0bbd898 ("t9300:
use perl "head -c" clone in place of "dd bs=1 count=16000" kluge",
2010-12-13) this invocation would have broken things there too.
Also, change a valgrind-specific codepath in test-lib.sh to use this
wrapper. Given where valgrind runs I don't think this would ever
become a portability issue in practice, but it's easier to just use
the wrapper than introduce some exception for the "make test-lint"
check being added here.
1. http://pubs.opengroup.org/onlinepubs/9699919799/utilities/head.html
2. 08d5d82eae (diff-f7d3c4fabeed1691620d608f1534f5e5)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test prerequisite defined by various test scripts with slightly
different semantics has been consolidated into a single copy and
made into a lazily defined one.
* wc/make-funnynames-shared-lazy-prereq:
t: factor out FUNNYNAMES as shared lazy prereq
This makes sure that cache-tree is consistent with the index. The main
purpose is to catch potential problems by saving the index in
unpack_trees() but the line in write_index() would also help spot
missing invalidation in other code.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A fair number of tests need to check that the filesystem supports file
names including "funny" characters, like newline, tab, and double-quote.
Jonathan Nieder suggested that this be extracted into a lazy prereq in
the top-level `test-lib.sh`. This patch effects that change.
The FUNNYNAMES prereq now uniformly requires support for newlines, tabs,
and double-quotes in filenames. This very slightly decreases the power
of some tests, which might have run previously on a system that supports
(e.g.) newlines and tabs but not double-quotes, but now will not. This
seems to me like an acceptable tradeoff for consistency.
One test (`t/t9902-completion.sh`) defined FUNNYNAMES to further require
the separators \034 through \037, the test for which was implemented
using the Bash-specific $'\034' syntax. I've elected to leave this one
as is, renaming it to FUNNIERNAMES.
After this patch, `git grep 'test_\(set\|lazy\)_prereq.*FUNNYNAMES'` has
only one result.
Signed-off-by: William Chargin <wchargin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option detects broken &&-chains by forcing the test to
exit early (as the very first step) with a sentinel value. If that
sentinel is the test's overall exit code, then the &&-chain is intact;
if not, then the chain is broken. Unfortunately, this detection does not
extend to &&-chains within subshells even when the subshell itself is
properly linked into the outer &&-chain.
Address this shortcoming by feeding the body of the test to a
lightweight "linter" which can peer inside subshells and identify broken
&&-chains by pure textual inspection. Although the linter does not
actually parse shell scripts, it has enough knowledge of shell syntax to
reliably deal with formatting style variations (as evolved over the
years) and to avoid being fooled by non-shell content (such as inside
here-docs and multi-line strings). It recognizes modern subshell
formatting:
statement1 &&
(
statement2 &&
statement3
) &&
statement4
as well as old-style:
statement1 &&
(statement2 &&
statement3) &&
statement4
Heuristics are employed to properly identify the extent of a subshell
formatted in the old-style since a number of legitimate constructs may
superficially appear to close the subshell even though they don't. For
example, it understands that neither "x=$(command)" nor "case $x in *)"
end a subshell, despite the ")" at the end of line.
Due to limitations of the tool used ('sed') and its inherent
line-by-line processing, only subshells one level deep are handled, as
well as one-liner subshells one level below that. Subshells deeper than
that or multi-line subshells at level two are passed through as-is, thus
&&-chains in their bodies are not checked.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests hardcode the raw object names, which would change once
we migrate away from SHA-1. While some of them must test against
exact object names, most of them do not have to use hardcoded
constants in the test. The latter kind of tests have been updated
to test the moral equivalent of the original without hardcoding the
actual object names.
* bc/hash-independent-tests: (28 commits)
t5300: abstract away SHA-1-specific constants
t4208: abstract away SHA-1-specific constants
t4045: abstract away SHA-1-specific constants
t4042: abstract away SHA-1-specific constants
t4205: sort log output in a hash-independent way
t/lib-diff-alternative: abstract away SHA-1-specific constants
t4030: abstract away SHA-1-specific constants
t4029: abstract away SHA-1-specific constants
t4029: fix test indentation
t4022: abstract away SHA-1-specific constants
t4020: abstract away SHA-1-specific constants
t4014: abstract away SHA-1-specific constants
t4008: abstract away SHA-1-specific constants
t4007: abstract away SHA-1-specific constants
t3905: abstract away SHA-1-specific constants
t3702: abstract away SHA-1-specific constants
t3103: abstract away SHA-1-specific constants
t2203: abstract away SHA-1-specific constants
t: skip pack tests if not using SHA-1
t4044: skip test if not using SHA-1
...
A test to see if the filesystem normalizes UTF-8 filename has been
updated to check what we need to know in a more direct way, i.e. a
path created in NFC form can be accessed with NFD form (or vice
versa) to cope with APFS as well as HFS.
* tb/test-apfs-utf8-normalization:
test: correct detection of UTF8_NFD_TO_NFC for APFS
Currently we have a variable, $_x40, which contains a regex that matches
a full 40-character hex constant. However, with NewHash, we'll have
object IDs that are longer than 40 characters. In such a case, $_x40
will be a confusing name. Create a $OID_REGEX variable which will
always reflect a regex matching the appropriate object ID, regardless of
the length of the current hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we have a variable, $_z40, which contains the all-zero object
ID. However, with NewHash, we'll have an all-zero object ID which is
longer than 40 hex characters. In such a case, $_z40 will be a
confusing name. Create a $ZERO_OID variable which will always reflect
the all-zeros object ID, regardless of the length of the current hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some basic tests in our codebase that test that we get fixed
SHA-1 values. These are valuable because they make sure that our SHA-1
implementation is free of bugs, but obviously these tests will fail with
a different hash.
There are also tests which intentionally produce objects that have
collisions when truncated to a certain length to test our handling of
these cases. These tests, too, will fail with a different hash.
Add an SHA1 prerequisite to annotate both of these types of tests and
disable them when we're using a different hash. In the future, we will
create versions of these tests which handle both SHA-1 and NewHash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On HFS (which is the default Mac filesystem prior to High Sierra),
unicode names are "decomposed" before recording.
On APFS, which appears to be the new default filesystem in Mac OS High
Sierra, filenames are recorded as specified by the user.
APFS continues to allow the user to access it via any name
that normalizes to the same thing.
This difference causes t0050-filesystem.sh to fail two tests.
Improve the test for a NFD/NFC in test-lib.sh:
Test if the same file can be reached in pre- and decomposed unicode.
Reported-By: Elijah Newren <newren@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Tested-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible to have libcurl installed but not the curl
command-line utility. The latter is not generally needed for
Git's http support, but we use it in t5561 for basic tests
of http-backend's functionality. Let's detect when it's
missing and skip this test.
Note that we can't mark the individual tests with the CURL
prerequisite. They're in a shared t556x_common that uses the
GET and POST functions as a level of indirection, and it's
only our implementations of those functions in t5561 that
requires curl. It's not a problem, though, as literally
every test in the script would depend on the prerequisite
anyway.
Reported-by: Jens Krüger <Jens.Krueger@frm2.tum.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running test scripts under -x option of the shell is often not a
useful way to debug them, because the error messages from the
commands tests try to capture and inspect are contaminated by the
tracing output by the shell. An earlier work done to make it more
pleasant to run tests under -x with recent versions of bash is
extended to cover posix shells that do not support BASH_XTRACEFD.
* sg/test-x:
travis-ci: run tests with '-x' tracing
t/README: add a note about don't saving stderr of compound commands
t1510-repo-setup: mark as untraceable with '-x'
t9903-bash-prompt: don't check the stderr of __git_ps1()
t5570-git-daemon: don't check the stderr of a subshell
t5526: use $TRASH_DIRECTORY to specify the path of GIT_TRACE log file
t5500-fetch-pack: don't check the stderr of a subshell
t3030-merge-recursive: don't check the stderr of a subshell
t1507-rev-parse-upstream: don't check the stderr of a shell function
t: add means to disable '-x' tracing for individual test scripts
t: prevent '-x' tracing from interfering with test helpers' stderr
The previous patch resolved most of the test failures caused by
running our test suite with '-x' tracing and /bin/sh, and the
following patches in this series will resolve almost all of the
remaining failures. Unfortunately, not yet all.
Add means to disable '-x' tracing for individual test scripts by
setting the $test_untraceable variable to a non-empty value in the
test script before sourcing 'test-lib.sh'. However, since '-x'
tracing is not an issue with recent Bash versions supporting
BASH_XTRACEFD, i.e. v4.1 and later, don't disable tracing when the
test script is run with such a Bash version even when
$test_untraceable is set.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test fixes.
* sg/test-i18ngrep:
t: make 'test_i18ngrep' more informative on failure
t: validate 'test_i18ngrep's parameters
t: move 'test_i18ncmp' and 'test_i18ngrep' to 'test-lib-functions.sh'
t5536: let 'test_i18ngrep' read the file without redirection
t5510: consolidate 'grep' and 'test_i18ngrep' patterns
t4001: don't run 'git status' upstream of a pipe
t6022: don't run 'git merge' upstream of a pipe
t5812: add 'test_i18ngrep's missing filename parameter
t5541: add 'test_i18ngrep's missing filename parameter
git respects XDG_CACHE_HOME for the credential cache. So, we should
unset XDG_CACHE_HOME for the test environment, lest a user's custom one
cause failure in the test.
For example, t/t0301-credential-cache.sh expects a default directory
to be used if it hasn't explicitly set XDG_CACHE_HOME.
Signed-off-by: Genki Sky <sky@genki.is>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More tests for wildmatch functions.
* ab/wildmatch-tests:
wildmatch test: mark test as EXPENSIVE_ON_WINDOWS
test-lib: add an EXPENSIVE_ON_WINDOWS prerequisite
wildmatch test: create & test files on disk in addition to in-memory
wildmatch test: perform all tests under all wildmatch() modes
wildmatch test: use test_must_fail, not ! for test-wildmatch
wildmatch test: remove dead fnmatch() test code
wildmatch test: use a paranoia pattern from nul_match()
wildmatch test: don't try to vertically align our output
wildmatch test: use more standard shell style
wildmatch test: indent with tabs, not spaces
Johannes Schindelin
SZEDER Gábor
Junio C Hamano
Ævar Arnfjörð Bjarmason
Ben Peart
Nguyễn Thái Ngọc Duy
William Chargin
Eric Sunshine
brian m. carlson
Torsten Bögershausen
Jeff King
Genki Sky