Code clean-up.
* rs/janitorial:
dir: remove unused variable sb
clean: remove unused variable buf
use file_exists() to check if a file exists in the worktree
core.excludesfile (defaulting to $XDG_HOME/git/ignore) is supposed
to be overridden by repository-specific .git/info/exclude file, but
the order was swapped from the beginning. This belatedly fixes it.
* jc/gitignore-precedence:
ignore: info/exclude should trump core.excludesfile
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
t0302: "unreadable" test needs POSIXPERM
t0302: test credential-store support for XDG_CONFIG_HOME
git-credential-store: support XDG_CONFIG_HOME
git-credential-store: support multiple credential files
Teach the codepaths that read .gitignore and .gitattributes files
that these files encoded in UTF-8 may have UTF-8 BOM marker at the
beginning; this makes it in line with what we do for configuration
files already.
* cn/bom-in-gitignore:
attr: skip UTF8 BOM at the beginning of the input file
config: use utf8_bom[] from utf.[ch] in git_parse_source()
utf8-bom: introduce skip_utf8_bom() helper
add_excludes_from_file: clarify the bom skipping logic
dir: allow a BOM at the beginning of exclude files
Since only the xdg excludes file path is required, simplify the code by
replacing use of home_config_paths() with xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$GIT_DIR/info/exclude and core.excludesfile (which falls back to
$XDG_HOME/git/ignore) are both ways to override the ignore pattern
lists given by the project in .gitignore files. The former, which
is per-repository personal preference, should take precedence over
the latter, which is a personal preference default across different
repositories that are accessed from that machine. The existing
documentation also agrees.
However, the precedence order was screwed up between these two from
the very beginning when 896bdfa2 (add: Support specifying an
excludes file with a configuration variable, 2007-02-27) introduced
core.excludesfile variable.
Noticed-by: Yohei Endo <yoheie@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the recent change to ignore the UTF8 BOM at the beginning of
.gitignore files, we now have two codepaths that do such a skipping
(the other one is for reading the configuration files).
Introduce utf8_bom[] constant string and skip_utf8_bom() helper
and teach .gitignore code how to use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the previous step shifts where the "entry" begins, we
still iterate over the original buf[], which may begin with the
UTF-8 BOM we are supposed to be skipping. At the end of the first
line, the code grabs the contents of it starting at "entry", so
there is nothing wrong per-se, but the logic looks really confused.
Instead, move the buf pointer and shrink its size, to truly
pretend that UTF-8 BOM did not exist in the input.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some text editors like Notepad or LibreOffice write an UTF-8 BOM in
order to indicate that the file is Unicode text rather than whatever the
current locale would indicate.
If someone uses such an editor to edit a gitignore file, we are left
with those three bytes at the beginning of the file. If we do not skip
them, we will attempt to match a filename with the BOM as prefix, which
won't match the files the user is expecting.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected call sequence is for the caller to use match_pathspec()
repeatedly on a set of pathspecs, accumulating the "hits" in a
separate array, and then call this function to diagnose a pathspec
that never matched anything, as that can indicate a typo from the
command line, e.g. "git commit Maekfile".
Many builtin commands use this function from builtin/ls-files.c,
which is not a very healthy arrangement. ls-files might have been
the first command to feel the need for such a helper, but the need
is shared by everybody who uses the "match and then report" pattern.
Move it to dir.c where match_pathspec() is defined.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This "stk" shadows the first declaration at the top. There's currently
no bad effect. But let's avoid it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce the use of fixed sized buffer passed to getcwd() calls
by introducing xgetcwd() helper.
* rs/strbuf-getcwd:
use strbuf_add_absolute_path() to add absolute paths
abspath: convert absolute_path() to strbuf
use xgetcwd() to set $GIT_DIR
use xgetcwd() to get the current directory or die
wrapper: add xgetcwd()
abspath: convert real_path_internal() to strbuf
abspath: use strbuf_getcwd() to remember original working directory
setup: convert setup_git_directory_gently_1 et al. to strbuf
unix-sockets: use strbuf_getcwd()
strbuf: add strbuf_getcwd()
Convert several calls of getcwd() and die() to use xgetcwd() instead.
This way we get rid of fixed-size buffers (which can be too small
depending on the used file system) and gain consistent error messages.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a segfault in git-status with long paths on Windows,
where PATH_MAX is only 260.
This also fixes the problem of silently ignoring .gitignore if the
full path exceeds PATH_MAX. Now add_excludes_from_file() will report
if it gets ENAMETOOLONG.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often represent our strings as a counted string, i.e. a pair of
the pointer to the beginning of the string and its length, and the
string may not be NUL terminated to that length.
To compare a pair of such counted strings, unpack-trees.c and
read-cache.c implement their own name_compare() functions
identically. In addition, the cache_name_compare() function in
read-cache.c is nearly identical. The only difference is when one
string is the prefix of the other string, in which case
name_compare() returns -1/+1 to show which one is longer, and
cache_name_compare() returns the difference of the lengths to show
the same information.
Unify these three functions by using the implementation from
cache_name_compare(). This does not make any difference to the
existing and future callers, as they must be paying attention only
to the sign of the returned value (and not the magnitude) because
the original implementations of these two functions return values
returned by memcmp(3) when the one string is not a prefix of the
other string, and the only thing memcmp(3) guarantees its callers is
the sign of the returned value, not the magnitude.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Discard the unnecessary 'nr_spaces' variable, remove 'strlen()' and
improve the 'if' structure. Switch to pointers instead of integers
to control the loop.
Slightly more rare occurrences of 'text \ ' with a backslash
in between spaces are handled correctly. Namely, the code in
7e2e4b37 (dir: ignore trailing spaces in exclude patterns, 2014-02-09)
does not reset 'last_space' when a backslash is encountered and the above
line stays intact as a result.
Add a test at the end of t/t0008-ignores.sh to exhibit this behavior.
Signed-off-by: Pasha Bolokhov <pasha.bolokhov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that it calls a static inline function, it cannot be an inline
definition with external linkage. Remove inline and make it an
external definition.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace open-coded reallocation with ALLOC_GROW() macro.
* dd/use-alloc-grow:
sha1_file.c: use ALLOC_GROW() in pretend_sha1_file()
read-cache.c: use ALLOC_GROW() in add_index_entry()
builtin/mktree.c: use ALLOC_GROW() in append_to_tree()
attr.c: use ALLOC_GROW() in handle_attr_line()
dir.c: use ALLOC_GROW() in create_simplify()
reflog-walk.c: use ALLOC_GROW()
replace_object.c: use ALLOC_GROW() in register_replace_object()
patch-ids.c: use ALLOC_GROW() in add_commit()
diffcore-rename.c: use ALLOC_GROW()
diff.c: use ALLOC_GROW()
commit.c: use ALLOC_GROW() in register_commit_graft()
cache-tree.c: use ALLOC_GROW() in find_subtree()
bundle.c: use ALLOC_GROW() in add_to_ref_list()
builtin/pack-objects.c: use ALLOC_GROW() in check_pbase_path()
We started using wildmatch() in place of fnmatch(3); complete the
process and stop using fnmatch(3).
* nd/no-more-fnmatch:
actually remove compat fnmatch source code
stop using fnmatch (either native or compat)
Revert "test-wildmatch: add "perf" command to compare wildmatch and fnmatch"
use wildmatch() directly without fnmatch() wrapper
Trailing whitespaces in .gitignore files, unless they are quoted for
fnmatch(3), e.g. "path\ ", are warned and ignored.
Strictly speaking, this is a backward incompatible change, but very
unlikely to bite any sane user and adjusting should be obvious and
easy.
* nd/gitignore-trailing-whitespace:
t0008: skip trailing space test on Windows
dir: ignore trailing spaces in exclude patterns
dir: warn about trailing spaces in exclude patterns
This patch activates the DO_MATCH_DIRECTORY code in m_p_i(), which
makes "git diff HEAD submodule/" and "git diff HEAD submodule" produce
the same output. Previously only the version without trailing slash
returns the difference (if any).
That's the effect of new ce_path_match(). dir_path_match() is not
executed by the new tests. And it should not introduce regressions.
Previously if path "dir/" is passed in with pathspec "dir/", they
obviously match. With new dir_path_match(), the path becomes
_directory_ "dir" vs pathspec "dir/", which is not executed by the old
code path in m_p_i(). The new code path is executed and produces the
same result.
The other case is pathspec "dir" and path "dir/" is now turned to
"dir" (with DO_MATCH_DIRECTORY). Still the same result before or after
the patch.
So why change? Because of the next patch about clean.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we do support matching pathspec "foo/" against directory
"foo". That is because match_pathspec() has no way to tell "foo" is a
directory and matching "foo/" against _file_ "foo" is wrong.
The callers can now tell match_pathspec if "foo" is a directory, we
could make an exception for this case. Code is not executed though
because no callers pass the flag yet.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A long time ago, for some reason I was not happy with
match_pathspec(). I created a better version, match_pathspec_depth()
that was suppose to replace match_pathspec()
eventually. match_pathspec() has finally been gone since 6 months
ago. Use the shorter name for match_pathspec_depth().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that we don't use fnmatch() anymore.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up and protection against concurrent write access to the
ref namespace.
* mh/safe-create-leading-directories:
rename_tmp_log(): on SCLD_VANISHED, retry
rename_tmp_log(): limit the number of remote_empty_directories() attempts
rename_tmp_log(): handle a possible mkdir/rmdir race
rename_ref(): extract function rename_tmp_log()
remove_dir_recurse(): handle disappearing files and directories
remove_dir_recurse(): tighten condition for removing unreadable dir
lock_ref_sha1_basic(): if locking fails with ENOENT, retry
lock_ref_sha1_basic(): on SCLD_VANISHED, retry
safe_create_leading_directories(): add new error value SCLD_VANISHED
cmd_init_db(): when creating directories, handle errors conservatively
safe_create_leading_directories(): introduce enum for return values
safe_create_leading_directories(): always restore slash at end of loop
safe_create_leading_directories(): split on first of multiple slashes
safe_create_leading_directories(): rename local variable
safe_create_leading_directories(): add explicit "slash" pointer
safe_create_leading_directories(): reduce scope of local variable
safe_create_leading_directories(): fix format of "if" chaining
If a file or directory that we are trying to remove disappears (e.g.,
because another process has pruned it), do not consider it an error.
However, if REMOVE_DIR_KEEP_TOPLEVEL is set, and the toplevel
directory is missing, then consider it an error (like before).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If opendir() fails on the top-level directory, it makes sense to try
to delete it anyway--but only if the failure was due to EACCES.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
directory_exists_in_index_icase() dangerously assumed that it could
access one character beyond the end of its directory argument, and that
that character would unconditionally be '/'. 2eac2a4c (ls-files -k: a
directory only can be killed if the index has a non-directory,
2013-08-15) added a caller which did not respect this undocumented
assumption, and 680be044 (dir.c::test_one_path(): work around
directory_exists_in_index_icase() breakage, 2013-08-23) added a
work-around which temporarily appends a '/' before invoking
directory_exists_in_index_icase().
Since the dangerous behavior of directory_exists_in_index_icase() has
been eliminated, the work-around is now redundant, so retire it (but not
the tests added by the same commit).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 5102c617 (Add case insensitivity support for directories when using
git status, 2010-10-03) added directories to the name-hash there was
only a single hash table in which both real cache entries and leading
directory prefixes were registered. To distinguish between the two types
of entries, directories were stored with a trailing '/'.
2092678c (name-hash.c: fix endless loop with core.ignorecase=true,
2013-02-28), however, moved directories to a separate hash table
(index_state.dir_hash) but retained the (now) redundant trailing '/',
thus callers continue to bear the burden of ensuring the slash's
presence before searching the index for a directory. Eliminate this
redundancy by storing paths in the dir-hash without the trailing '/'.
An important benefit of this change is that it eliminates undocumented
and dangerous behavior of dir.c:directory_exists_in_index_icase() in
which it assumes not only that it can validly access one character
beyond the end of its incoming directory argument, but also that that
character will unconditionally be a '/'. This perilous behavior was
"tolerated" because the string passed in by its lone caller always had a
'/' in that position, however, things broke [1] when 2eac2a4c (ls-files
-k: a directory only can be killed if the index has a non-directory,
2013-08-15) added a new caller which failed to respect the undocumented
assumption.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/232727
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each caller of index_name_exists() knows whether it is looking for a
directory or a file, and can avoid the unnecessary indirection of
index_name_exists() by instead calling index_dir_exists() or
index_file_exists() directly.
Invoking the appropriate search function explicitly will allow a
subsequent patch to relieve callers of the artificial burden of having
to add a trailing '/' to the pathname given to index_dir_exists().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-files -k" needs to crawl only the part of the working tree
that may overlap the paths in the index to find killed files, but
shared code with the logic to find all the untracked files, which
made it unnecessarily inefficient.
* jc/ls-files-killed-optim:
dir.c::test_one_path(): work around directory_exists_in_index_icase() breakage
t3010: update to demonstrate "ls-files -k" optimization pitfalls
ls-files -k: a directory only can be killed if the index has a non-directory
dir.c: use the cache_* macro to access the current index
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
directory_exists_in_index() takes pathname and its length, but its
helper function directory_exists_in_index_icase() reads one byte
beyond the end of the pathname and expects there to be a '/'.
This needs to be fixed, as that one-byte-beyond-the-end location may
not even be readable, possibly by not registering directories to
name hashes with trailing slashes. In the meantime, update the new
caller added recently to treat_one_path() to make sure that the path
buffer it gives the function is one byte longer than the path it is
asking the function about by appending a slash to it.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"ls-files -o" and "ls-files -k" both traverse the working tree down
to find either all untracked paths or those that will be "killed"
(removed from the working tree to make room) when the paths recorded
in the index are checked out. It is necessary to traverse the
working tree fully when enumerating all the "other" paths, but when
we are only interested in "killed" paths, we can take advantage of
the fact that paths that do not overlap with entries in the index
can never be killed.
The treat_one_path() helper function, which is called during the
recursive traversal, is the ideal place to implement an
optimization.
When we are looking at a directory P in the working tree, there are
three cases:
(1) P exists in the index. Everything inside the directory P in
the working tree needs to go when P is checked out from the
index.
(2) P does not exist in the index, but there is P/Q in the index.
We know P will stay a directory when we check out the contents
of the index, but we do not know yet if there is a directory
P/Q in the working tree to be killed, so we need to recurse.
(3) P does not exist in the index, and there is no P/Q in the index
to require P to be a directory, either. Only in this case, we
know that everything inside P will not be killed without
recursing.
Note that this helper is called by treat_leading_path() that decides
if we need to traverse only subdirectories of a single common
leading directory, which is essential for this optimization to be
correct. This caller checks each level of the leading path
component from shallower directory to deeper ones, and that is what
allows us to only check if the path appears in the index. If the
call to treat_one_path() weren't there, given a path P/Q/R, the real
traversal may start from directory P/Q/R, even when the index
records P as a regular file, and we would end up having to check if
any leading subpath in P/Q/R, e.g. P, appears in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These codepaths always start from the_index and use index_*
functions, but there is no reason to do so. Use the compatibility
cache_* macro to access the current in-core index like everybody
else.
While at it, fix typo in the comment for a function to check if a
path within a directory appears in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
:(glob)path differs from plain pathspec that it uses wildmatch with
WM_PATHNAME while the other uses fnmatch without FNM_PATHNAME. The
difference lies in how '*' (and '**') is processed.
With the introduction of :(glob) and :(literal) and their global
options --[no]glob-pathspecs, the user can:
- make everything literal by default via --noglob-pathspecs
--literal-pathspecs cannot be used for this purpose as it
disables _all_ pathspec magic.
- individually turn on globbing with :(glob)
- make everything globbing by default via --glob-pathspecs
- individually turn off globbing with :(literal)
The implication behind this is, there is no way to gain the default
matching behavior (i.e. fnmatch without FNM_PATHNAME). You either get
new globbing or literal. The old fnmatch behavior is considered
deprecated and discouraged to use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
René Scharfe
Paul Tan
Carlos Martín Nieto
Nguyễn Thái Ngọc Duy
Jeremiah Mahler
Pasha Bolokhov
Charles Bailey
Dmitry S. Dolzhenko
Michael Haggerty
Eric Sunshine