Commit 5b4efea666 (cvsimport: shell-quote variable used in
backticks, 2017-09-11) tried to shell-quote a variable, but
forgot to use the "/g" modifier to apply the quoting to the
whole variable. This means we'd miss any embedded
single-quotes after the first one.
Reported-by: <littlelailo@yahoo.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run `git rev-parse` though the shell, and quote its
argument only with single-quotes. This prevents most
metacharacters from being a problem, but misses the obvious
case when $name itself has single-quotes in it. We can fix
this by applying the usual shell-quoting formula.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since Perl 5.22, "A literal '{' should now be escaped in a pattern".
Silence the recently added warning by using \{ instead.
Signed-off-by: Christian Neukirchen <chneukirchen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had this in "git merge" manual for eternity:
'git merge' <msg> HEAD <commit>...
[This] syntax (<msg> `HEAD` <commit>...) is supported for
historical reasons. Do not use it from the command line or in
new scripts. It is the same as `git merge -m <msg> <commit>...`.
With the update to "git merge" to make it understand what is
recorded in FETCH_HEAD directly, including Octopus merge cases, we
now can rewrite the use of this syntax in "git pull" with a simple
"git merge FETCH_HEAD".
Also there are quite a few fallouts in the test scripts, and it
turns out that "git cvsimport" also uses this old syntax to record
a merge.
Judging from this result, I would not be surprised if dropping the
support of the old syntax broke scripts people have written and been
relying on for the past ten years. But at least we can start the
deprecation process by throwing a warning message when the syntax is
used.
With luck, we might be able to drop the support in a few years.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the usage string consistent with Git.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some implementations of strftime(3) lack support for "%z". Also
there is no need for %s in git-cvsimport as the supplied time is
already in seconds since the epoch.
For %z, use the function get_tz_offset provided by Git.pm instead.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On many platforms, the first invocation of localtime_r will
check $TZ in the environment, but subsequent invocations
will use a cached value. That means that setting $ENV{TZ} in
the middle of the program may or may not have an effect on
later calls to localtime. Perl 5.10.0 and later handles
this automatically for us, but we try to remain portable
back to 5.8. Work around it by calling tzset ourselves.
CVS patchsets are imported with timestamps having an offset of +0000
(UTC). The cvs-authors file is already used to translate the CVS
username to full name and email in the corresponding commit. Extend
this file to support an optional timezone for calculating a user-
specific timestamp offset.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain characters such as "?" can be present in a CVS tag name, but
git does not allow these characters in tags. If git-cvsimport
encounters a CVS tag that git cannot handle, cvsimport will error and
refuse to continue the import beyond that point.
When importing CVS tags, strip all the inappropriate strings from the
tag names as we translate them to git tag names.
Provide more debugging information to the user if we've altered the
tag and the "git tag" command still fails. Also, warn the user if we
end up skipping an (unusable) tag altogether.
Signed-off-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In conn, if password is not passed on command line, look for a password
entry in both the CVS password file and the CVSNT password file. If only
one file is found and the requested repository is in that file, or if both
files are found but the requested repository is found in only one file, use
the password from the single file containing the repository entry. If both
files are found and the requested repository is found in both files, then
produce an error message.
The CVS password file separates tokens with a space character, while
the CVSNT password file separates tokens with an equal (=) character.
Add a sub find_password_entry that accepts the password file name
and a delimiter to eliminate code duplication.
Signed-off-by: Guy Rouillier <guyr@burntmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the CVS server is down, this reduced the git-cvsimport output from:
ssh: connect to host ijbswa.cvs.sourceforge.net port 22: Connection refused
Use of uninitialized value $rep in scalar chomp at /usr/local/libexec/git-core/git-cvsimport line 369.
Use of uninitialized value $rep in substitution (s///) at /usr/local/libexec/git-core/git-cvsimport line 370.
Expected Valid-requests from server, but got: <unknown>
to the less noisy:
ssh: connect to host ijbswa.cvs.sourceforge.net port 22: Connection refused
Failed to read from server at /usr/local/libexec/git-core/git-cvsimport line 370.
In this case a silent exit() instead of the die() would probably do,
but I assume that there could be cases where the connection attempt
succeeds, but reading from the server fails for other reasons.
Signed-off-by: Fabian Keil <fk@fabiankeil.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code leads to
fatal: bad config value for 'cvsimport.r' in .git/config
for a standard use case with cvsimport.r set.
cvsimport sets internal variables by checking the config for each
possible command line option. The problem is that config items are case
insensitive, so config.r and config.R are the same. The ugly error is
due to that fact that cvsimport expects a bool for -R (and thus
config.R) but a remote name for -r (and thus config.r).
Fix this by making cvsimport expect long names for uppercase options.
config options for cvsimport have been undocumented so far, though
present in the code and advertised in several tutorials. So one may read
"enhance" for "fix". Similarly, the names for the options are
"documented" in the code, waitiing for their lowercase equivalents to be
transformed into long config options, as well.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since fb1bb96 (read-tree: deprecate syntax without tree-ish args,
2010-09-10) not passing --empty caused a spurious warning that was
shown to the user.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the Perl scripts to turn on lexical warnings instead of setting
the global $^W variable via the -w switch.
The -w sets warnings for all code that interpreter runs, while "use
warnings" is lexically scoped. The former is probably not what the
authors wanted.
As an auxiliary benefit it's now possible to build Git with:
PERL_PATH='/usr/bin/env perl'
Which would previously result in failures, since "#!/usr/bin/env perl -w"
doesn't work as a shebang.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option causes the creation or updating of a file mapping CVS
(filename, revision number) pairs to Git commit IDs. This is expected
to be useful if you have CVS revision numbers stored in commit messages,
bug-tracking systems, email archives, and the like.
Signed-off-by: Aaron Crane <git@aaroncrane.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch standardizes calls to system() where external git tools are
called. Instead of system("git foo ... "), use system(qw(git foo ...)).
All calls are made without the use of an 'sh -c' process to split the
arguments.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Standardize calls to open() where external git tools are used as
part of a pipeline. Instead of open(X, "git foo ... |)", use
open(X, "-|", qw(git foo ...)). All calls are made without the
use of an 'sh -c' process to split the arguments.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch updates all calling conventions for external git tools. to
use the modern calling convention (eg: git foo instead of git-foo).
This is almost entierly a s/git-/git / operation, with deviations only
as required to keep tests passing.
Reported-by: Alexander Maier <amaier@opencsw.org>
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the first things that cvsimport does is chdir to the
newly created git repo. This means that any filenames given
to us on the command line will be looked up relative to the
git repo directory. This is probably not what the user
expects, so let's remember and prepend the original
directory for relative filenames.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we do not read a password from the command line, and there are no
passwords stored in .cvspass, we have to initialize the password with
just "A".
This fixes a regression introduced by 3fb9d582 (Do not scramble
password read from .cvspass).
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Passwords stored in .cvspass are already scrambled, we do not
want to scramble them twice. Only passwords read from the
command line are scrambled.
This fixes a regression introduced by b2139db (git-cvsimport: add support
for cvs pserver password scrambling., 2009-08-14).
Signed-off-by: Pascal Obry <pascal@obry.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of a cleartext password, the CVS pserver expects a scrambled one
in the authentication request. With this patch it is possible to import
CVS repositories only accessible via pserver and user/password.
Signed-off-by: Dirk Hoerner <dirker@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For CVS repositories with unusual CVSROOT, git-cvsimport would fail:
$ git-cvsimport -v -C foo -d :pserver:anon:@cvs.example.com:/ foo
AuthReply: error 0 : no such repository
This patch ensures that the path is never empty, but at least '/'.
Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids invoking the shell. Not only is it faster, but
it prevents the possibility of interpreting our arguments in
the shell.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit-tree fails when specifying a remote name (via -r option) and
one of the parent branch has a name. Prefixing with "$remote/" fix it.
Signed-off-by: Marc-Andre Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use Getopt::Long instead of Getopt::Std to handle multiple -M options,
for all the cases when having a single custom regex is not enough.
Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default value of @mergerx uses \w, which matches word
character; a branch name like policy-20050608-br will not be
matched.
Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default value of @mergerx uses \W, which matches a non-word
character; this means that commit messages like "Merging FOO" are not
matched by default; using \b, which matches a word boundary, instead of
\W fixes that.
This change was suggested by Frédéric Brière through
http://bugs.debian.org/463468
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git cvsimport was the last tool to use repo-config instead of config. Update
it to use plain git config.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were not previously checking the exit status of cvsps at
all. If it exited before producing any useful output, we
ended up with an empty import, which caused a spew of
confusing error messages from other parts of git:
$ git-cvsimport foo
Initialized empty Git repository in ...
some error from cvsps
fatal: refs/heads/origin: not a valid SHA1
fatal: master: not a valid SHA1
warning: You appear to be on a branch yet to be born.
warning: Forcing checkout of HEAD.
fatal: just how do you expect me to merge 0 trees?
checkout failed: 256
Now we get:
$ git-cvsimport foo
Initialized empty Git repository in ...
some error from cvsps
git-cvsimport: fatal: cvsps reported error
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Replace the word 'update-cache' by 'update-index' everywhere
cvsimport: fix usage of cvsimport.module
t7003-filter-branch: Fix test of a failing --msg-filter.
cvsimport: miscellaneous packed-ref fixes
cvsimport: use rev-parse to support packed refs
Add basic cvsimport tests
There were two problems:
1. We only look at the config variable if there is no module
given on the command line. We checked this by comparing
@ARGV == 0. However, at the time of the comparison, we
have not yet parsed the dashed options, meaning that
"git cvsimport" would read the variable but "git
cvsimport -a" would not. This is fixed by simply moving
the check after the call to getopt.
2. If the config variable did not exist, we were adding an
empty string to @ARGV. The rest of the script, rather
than barfing for insufficient input, would then try to
import the module '', leading to rather confusing error
messages. Based on patch from Emanuele Giaquinta.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were found with a grep for '$git_dir'; they all
replace a direct access of "$git_dir/refs/..." with a call
to git-rev-parse or git-update-ref.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if refs were packed, git-cvsimport would assume
that particular refs did not exist. This could lead to, for
example, overwriting previous 'origin' commits that were
packed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cvs programs do not default to "anonymous" as the user name, but use the
currently logged in user. This patch more closely matches the cvs behavior.
Signed-off-by: Gordon Hopper <g.hopper@computer.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation states for the -u option that underscores in tag and
branch names are converted to dots, but this was actually implemented
for the tag names only.
Kurt Roeckx reported this through
http://bugs.debian.org/446495
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the tag was moved in CVS or SVN history, it will be moved in the
imported history as well. Tag history is not tracked.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King
Junio C Hamano
Christian Neukirchen
David Aguilar
Ben Walton
Chris Rorvick
Ken Dreyer
Guy Rouillier
Fabian Keil
Michael J Gruber
Thomas Rast
Ævar Arnfjörð Bjarmason
Aaron Crane
Ben Walton
Clemens Buchacher
Pascal Obry
Dirk Hoerner
Jim Meyering
Stephan Beyer
Philippe Bruhat (BooK)
Paul Oliver
Marc-Andre Lureau
Gerrit Pape
Dan McGee
Stefan Sperling
Gordon Hopper
Michael Smith