When "git rebase -i" is given a broken instruction, it told the
user to fix it with "--edit-todo", but didn't say what the step
after that was (i.e. "--continue").
* rt/rebase-i-broken-insn-advise:
rebase -i: improve advice on bad instruction lines
Even when "git pull --rebase=preserve" (and the underlying "git
rebase --preserve") can complete without creating any new commit
(i.e. fast-forwards), it still insisted on having a usable ident
information (read: user.email is set correctly), which was less
than nice. As the underlying commands used inside "git rebase"
would fail with a more meaningful error message and advice text
when the bogus ident matters, this extra check was removed.
* jk/rebase-i-drop-ident-check:
rebase-interactive: drop early check for valid ident
If we found bad instruction lines in the instruction sheet
of interactive rebase, we give the user advice on how to
fix it. However, we don't tell the user what to do afterwards.
Give the user advice to run 'git rebase --continue' after
the fix.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For proper i18n, the logic cannot embed english specific processing.
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the very inception of interactive-rebase in 1b1dce4
(Teach rebase an interactive mode, 2007-06-25), there has
been a preemptive check, before looking at any commits, to
see whether the user has a valid name/email combination.
This is convenient, because it means that we abort the
operation before even beginning (rather than just
complaining that we are unable to pick a particular commit).
However, it does the wrong thing when the rebase does not
actually need to generate any new commits (e.g., a
fast-forward with no commits to pick, or one where the base
stays the same, and we just pick the same commits without
rewriting anything). In this case it may complain about the
lack of ident, even though one would not be needed to
complete the operation.
This may seem like mere nit-picking, but because interactive
rebase underlies the "preserve-merges" rebase, somebody who
has set "pull.rebase" to "preserve" cannot make even a
fast-forward pull without a valid ident, as we bail before
even realizing the fast-forward nature.
This commit drops the extra ident check entirely. This means
we rely on individual commands that generate commit objects
to complain. So we will continue to notice and prevent cases
that actually do create commits, but with one important
difference: we fail while actually executing the "pick"
operations, and leave the rebase in a conflicted, half-done
state.
In some ways this is less convenient, but in some ways it is
more so; the user can then manually commit or even "git
rebase --continue" after setting up their ident (or
providing it as a one-off on the command line).
Reported-by: Dakota Hawkins <dakotahawkins@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Interactive rebase uses 'wc -l' to write the current patch number
in a progress report. Some implementations of 'wc -l' produce spaces
before the number, leading to ugly output such as
Rebasing ( 3/8)
Remove the spaces using a trivial arithmetic evaluation.
Before 9588c52 (i18n: rebase-interactive: mark strings for
translation) this was not a problem because printf was used to
generate the text. Since that commit, the count is interpolated
directly from a shell variable into the text, where the spaces
remain. The total number of patches does not have this problem
even though it is interpolated from a shell variable in the same
manner, because the variable is set by an arithmetic evaluation.
Later in the script, there is a virtually identical case where
leading spaces are trimmed, but it uses a pattern substitution:
todocount=$(git stripspace --strip-comments <"$todo" | wc -l)
todocount=${todocount##* }
I did not choose this idiom because it adds a line of code, and
there is already an arithmetic evaluation in the vicinity of the
line that is changed here.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i --autostash" did not restore the auto-stashed change
when the operation was aborted.
* ps/rebase-i-auto-unstash-upon-abort:
rebase -i: restore autostash on abort
More markings of messages for i18n, with updates to various tests
to pass GETTEXT_POISON tests.
One patch from the original submission dropped due to conflicts
with jk/upload-pack-hook, which is still in flux.
* va/i18n-even-more: (38 commits)
t5541: become resilient to GETTEXT_POISON
i18n: branch: mark comment when editing branch description for translation
i18n: unmark die messages for translation
i18n: submodule: escape shell variables inside eval_gettext
i18n: submodule: join strings marked for translation
i18n: init-db: join message pieces
i18n: remote: allow translations to reorder message
i18n: remote: mark URL fallback text for translation
i18n: standardise messages
i18n: sequencer: add period to error message
i18n: merge: change command option help to lowercase
i18n: merge: mark messages for translation
i18n: notes: mark options for translation
i18n: notes: mark strings for translation
i18n: transport-helper.c: change N_() call to _()
i18n: bisect: mark strings for translation
t5523: use test_i18ngrep for negation
t4153: fix negated test_i18ngrep call
t9003: become resilient to GETTEXT_POISON
tests: unpack-trees: update to use test_i18n* functions
...
When we abort an interactive rebase we do so by calling
`die_abort`, which cleans up after us by removing the rebase
state directory. If the user has requested to use the autostash
feature, though, the state directory may also contain a reference
to the autostash, which will now be deleted.
Fix the issue by trying to re-apply the autostash in `die_abort`.
This will also handle the case where the autostash does not apply
cleanly anymore by recording it in a user-visible stash.
Reported-by: Daniel Hahler <git@thequod.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Comments about misbehaving FreeBSD shells have been clarified with
the version number (9.x and before are broken, newer ones are OK).
* em/newer-freebsd-shells-are-fine-with-returns:
rebase: update comment about FreeBSD /bin/sh
Mark strings in git-rebase--interactive.sh for translation. There is no
need to source git-sh-i18n since git-rebase.sh already does so.
Add git-rebase--interactive.sh to LOCALIZED_SH in Makefile in order to
enable extracting strings marked for translation by xgettext.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark comment messages of squash/fixup file ($squash_msg) for
translation.
Helper functions this_nth_commit_message and skip_nth_commit_message
replace the previous method of making the comment messages (such as
"This is the 2nd commit message:") aided by nth_string helper function.
This step was taken as a workaround to enabled translation of entire
sentences. However, doesn't change any text seen in English by the user,
except for string "The first commit's message is:" which was changed to
match the style of other instances.
The test t3404-rebase-interactive.sh resorts to set_fake_editor which
didn't account for GETTEXT_POISON. Fix it by assuming success when we
find dummy gettext poison output where was supposed to find the first
comment line "This is a combination of $count commits.".
For that same message, use plural aware eval_ngettext instead of
eval_gettext, since other languages have more complex plural forms.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use pipe to send gettext output to git stripspace instead of the
original method of using shell here-document, because command
substitution '$(...)' would not take place inside the here-documents.
The exception is the case of the last here-document redirecting to cat,
in which commands substitution works and, thus, is preserved in this
commit.
t3404: adapt test to the strings newly marked for translation
Test t3404-rebase-interactive.sh would fail under GETTEXT_POISON unless
using test_i18ngrep.
Add eval_ngettext fallback functions to be called when running, for
instance, under GETTEXT_POISON. Otherwise, tests would fail under
GETTEXT_POISON, or other build that doesn't support the GNU gettext,
because that function could not be found.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9f50d32 introduced a fix for FreeBSD /bin/sh misbehaviour
when dot-sourcing a file containing "return" statements outside of
any function, from a function in another shell script. That issue
affects FreeBSD 9.x, and is not present in the /bin/sh in FreeBSD
10.3 and later. Update the comment to clarify this.
The example from 9f50d32's commit message produces the expected output
on FreeBSD 10.3 and -CURRENT (the upcoming 11.0):
% sh script1.sh
only this line should show
%
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i", after it fails to auto-resolve the conflict, had
an unnecessary call to "git rerere" from its very early days, which
was spotted recently; the call has been removed.
* js/rebase-i-dedup-call-to-rerere:
rebase -i: remove an unnecessary 'rerere' invocation
Interactive rebase uses 'git cherry-pick' and 'git merge' to replay
commits. Both invoke the 'rerere' machinery when they fail due to merge
conflicts. Note that all code paths with these two commands also invoke
the shell function die_with_patch when the commands fail.
Since commit 629716d2 ("rerere: do use multiple variants") the second
operation of the rerere machinery can be observed by a duplicated
message "Recorded preimage for 'file'". This second operation records
the same preimage as the first one and, hence, only wastes cycles.
Remove the 'git rerere' invocation from die_with_patch.
Shell function die_with_patch can be called after the failure of
"git commit", too, which also calls into the rerere machinery, but it
does so only after a successful commit to record the resolution.
Therefore, it is wrong to call 'git rerere' from die_with_patch after
"git commit" fails.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9xxx series has been updated primarily for readability, while
fixing small bugs in it. A few scripted Porcelains have also been
updated to fix possible bugs around their use of "test -z" and
"test -n".
* jk/test-z-n-unquoted:
always quote shell arguments to test -z/-n
t9103: modernize test style
t9107: switch inverted single/double quotes in test
t9107: use "return 1" instead of "exit 1"
t9100,t3419: enclose all test code in single-quotes
t/lib-git-svn: drop $remote_git_svn and $git_svn_id
Portability enhancement for "rebase -i" to help platforms whose
shell does not like "for i in <empty>" (which is not POSIX-kosher).
* jk/rebase-interative-eval-fix:
rebase--interactive: avoid empty list in shell for-loop
In shell code like:
test -z $foo
test -n $foo
that does not quote its arguments, it's easy to think that
it is actually looking at the contents of $foo in each case.
But if $foo is empty, then "test" does not see any argument
at all! The results are quite subtle.
POSIX specifies that test's behavior depends on the number
of arguments it sees, and if $foo is empty, it sees only
one. The behavior in this case is:
1 argument: Exit true (0) if $1 is not null; otherwise,
exit false.
So in the "-z $foo" case, if $foo is empty, then we check
that "-z" is non-null, and it returns success. Which happens
to match what we expected. But for "-n $foo", if $foo is
empty, we'll see that "-n" is non-null and still return
success. That's the opposite of what we intended!
Furthermore, if $foo contains whitespace, we'll end up with
more than 2 arguments. The results in this case are
generally unspecified (unless the first part of $foo happens
to be a valid binary operator, in which case the results are
specified but certainly not what we intended).
And on top of this, even though "test -z $foo" _should_ work
for the empty case, some older shells (reportedly ksh88)
complain about the missing argument.
So let's make sure we consistently quote our variable
arguments to "test". After this patch, the results of:
git grep 'test -[zn] [^"]'
are empty.
Reported-by: Armin Kunaschik <megabreit@googlemail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $strategy_opts variable contains a space-separated list
of strategy options, each individually shell-quoted. To loop
over each, we "unwrap" them by doing an eval like:
eval '
for opt in '"$strategy_opts"'
do
...
done
'
Note the quoting that means we expand $strategy_opts inline
in the code to be evaluated (which is the right thing
because we want the IFS-split and de-quoting). If the
variable is empty, however, we ask the shell to eval the
following code:
for opt in
do
...
done
without anything between "in" and "do". Most modern shells
are happy to treat that like a noop, but reportedly ksh88 on
AIX considers it a syntax error. So let's catch the case
that the variable is empty and skip the eval altogether
(since we know the loop would be a noop anyway).
Reported-by: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit object name reported when "rebase -i" stops has been
shortened.
* rt/rebase-i-shorten-stop-report:
rebase-i: print an abbreviated hash when stop for editing
The message that is shown when rebase-i stops for editing prints
the full hash of the commit where it stopped which makes the message
overflow to the next line on smaller terminal windows. Print an
abbreviated hash instead.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent versions of GNU grep is pickier than before to decide if a
file is "binary" and refuse to give line-oriented hits when we
expect it to, unless explicitly told with "-a" option. As our
scripted Porcelains use sane_grep wrapper for line-oriented data,
even when the line may contain non-ASCII payload we took from
end-user data, use "grep -a" to implement sane_grep wrapper when
using an implementation of "grep" that takes the "-a" option.
* jc/sane-grep:
rebase-i: clarify "is this commit relevant?" test
sane_grep: pass "-a" if grep accepts it
While I was checking all the call sites of sane_grep and sane_egrep,
I noticed this one is somewhat strangely written. The lines in the
file sane_grep works on all begin with 40-hex object name, so there
is no real risk of confusing "test $(...) = ''" by finding something
that begins with a dash, but using the status from sane_grep makes
it a lot clearer what is going on.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user explicitly specified a merge strategy or strategy
options, continue to use that strategy/option after
"rebase --continue". Add a test of the corrected behavior.
If --merge is specified or implied by -s or -X, then "strategy and
"strategy_opts" are set to values from which "strategy_args" can be
derived; otherwise they are set to empty strings. Either way,
their values are propagated from one step of an interactive rebase
to the next via state files.
"do_merge", on the other hand, is *not* propagated to later steps of
an interactive rebase. Therefore, making the initialization of
"strategy_args" conditional on "do_merge" being set prevents later
steps of an interactive rebase from setting it correctly.
Luckily, we don't need the "do_merge" guard at all. If the rebase
was started without --merge, then "strategy" and "strategy_opts"
are both the empty string, which results in "strategy_args" also
being set to the empty string, which is just what we want in that
situation. So remove the "do_merge" guard and derive
"strategy_args" from "strategy" and "strategy_opts" every time.
Reported-by: Diogo de Campos <campos@esss.com.br>
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, when Git is installed under "C:\Program Files\Git",
SHELL_PATH will include a space. Fix "git rebase --interactive --exec"
so that it works with spaces in SHELL_PATH.
Signed-off-by: Fredrik Medley <fredrik.medley@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Recent update to "rebase -i" that tries to sanity check the edited
insn sheet before it uses it has become too picky on Windows where
CRLF left by the editor is turned into a trailing CR on the line
read via the "read" built-in command.
* gr/rebase-i-drop-warn:
rebase-i: work around Windows CRLF line endings
t3404: "rebase -i" gets broken when insn sheet uses CR/LF line endings
Editors on Windows can and do save text files with CRLF line
endings, which is the convention on the platform. We are seeing
reports that the "read" command in a port of bash to the environment
however does not strip the CRLF at the end, not adjusting for the
same convention on the platform.
This breaks the recently added sanity checks for the insn sheet fed
to "rebase -i"; instead of an empty line (hence nothing in $command),
the script was getting a lone CR in there.
Special case a lone CR and treat it the same way as an empty line to
work this around.
This patch (also) passes the test with Git for Windows, where the
issue was seen first.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" had a minor regression recently, which stopped
considering a line that begins with an indented '#' in its insn
sheet not a comment, which is now fixed.
* gr/rebase-i-drop-warn:
rebase-i: loosen over-eager check_bad_cmd check
rebase-i: explicitly accept tab as separator in commands
804098bb (git rebase -i: add static check for commands and SHA-1,
2015-06-29) tried to check all insns before running any in the todo
list, but it did so by implementing its own parser that is a lot
stricter than necessary. We used to allow lines that are indented
(including comment lines), and we used to allow a whitespace between
the insn and the commit object name to be HT, among other things,
that are flagged as an invalid line by mistake.
Fix this by using the same tokenizer that is used to parse the todo
list file in the new check.
Whether it's a good thing to accept indented comments is
debatable (other commands like "git commit" do not accept them), but we
already accepted them in the past, and some people and scripts rely on
this behavior. Also, a line starting with space followed by a '#' cannot
have any meaning other than being a comment, hence it doesn't harm to
accept them as comments.
Largely based on patch by: Junio C Hamano <gitster@pobox.com>
[jc: updated test with quickfix from Torsten Bögershausen]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-rebase-todo is parsed several times with different parsers. In
principle, the user input is normalized by transform_todo_ids and
further parsing can be stricter.
In case the user wrote
pick deadbeef<TAB>commit message
the parser of transform_todo_ids was considering the sha1 to be
"deadbeef<TAB>commit", and was leaving the tab in the transformed sheet.
In practice, this went unnoticed since the actual command interpretation
was done later in do_next which did accept the tab as a separator.
Make it explicit in the code of transform_todo_ids that tabs are
accepted. This way, code that mimicks it will also accept tabs as
separator.
A similar construct appears in skip_unnecessary_picks, but this one
comes after transform_todo_ids, hence reads the normalized format, so it
needs not be changed.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "drop commit-object-name subject" command as another way to
skip replaying of a commit in "rebase -i", and then punish those
who do not use it (and instead just remove the lines) by throwing
a warning.
* gr/rebase-i-drop-warn:
git rebase -i: add static check for commands and SHA-1
git rebase -i: warn about removed commits
git-rebase -i: add command "drop" to remove a commit
"git rebase -i"'s list of todo is made configurable.
* mr/rebase-i-customize-insn-sheet:
git-rebase--interactive.sh: add config option for custom instruction format
Abandoning an already applied change in "git rebase -i" with
"--continue" left CHERRY_PICK_HEAD and confused later steps.
* js/rebase-i-clean-up-upon-continue-to-skip:
rebase -i: do not leave a CHERRY_PICK_HEAD file behind
t3404: demonstrate CHERRY_PICK_HEAD bug
Abandoning an already applied change in "git rebase -i" with
"--continue" left CHERRY_PICK_HEAD and confused later steps.
* js/rebase-i-clean-up-upon-continue-to-skip:
rebase -i: do not leave a CHERRY_PICK_HEAD file behind
t3404: demonstrate CHERRY_PICK_HEAD bug
Check before the start of the rebasing if the commands exists, and for
the commands expecting a SHA-1, check if the SHA-1 is present and
corresponds to a commit. In case of error, print the error, stop git
rebase and prompt the user to fix with 'git rebase --edit-todo' or to
abort.
This allows to avoid doing half of a rebase before finding an error
and giving back what's left of the todo list to the user and prompt
him to fix when it might be too late for him to do so (he might have
to abort and restart the rebase).
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if commits were removed (i.e. a line was deleted) and print
warnings or stop git rebase depending on the value of the
configuration variable rebase.missingCommitsCheck.
This patch gives the user the possibility to avoid silent loss of
information (losing a commit through deleting the line in this case)
if he wants.
Add the configuration variable rebase.missingCommitsCheck.
- When unset or set to "ignore", no checking is done.
- When set to "warn", the commits are checked, warnings are
displayed but git rebase still proceeds.
- When set to "error", the commits are checked, warnings are
displayed and the rebase is stopped.
(The user can then use 'git rebase --edit-todo' and
'git rebase --continue', or 'git rebase --abort')
rebase.missingCommitsCheck defaults to "ignore".
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of removing a line to remove the commit, you can use the
command "drop" (just like "pick" or "edit"). It has the same effect as
deleting the line (removing the commit) except that you keep a visual
trace of your actions, allowing a better control and reducing the
possibility of removing a commit by mistake.
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When skipping commits whose changes were already applied via `git rebase
--continue`, we need to clean up said file explicitly.
The same is not true for `git rebase --skip` because that will execute
`git reset --hard` as part of the "skip" handling in git-rebase.sh, even
before git-rebase--interactive.sh is called.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" fired post-rewrite hook when it shouldn't (namely,
when it was told to stop sequencing with 'exec' insn).
* mm/rebase-i-post-rewrite-exec:
t5407: use <<- to align the expected output
rebase -i: fix post-rewrite hook with failed exec command
rebase -i: demonstrate incorrect behavior of post-rewrite
A config option 'rebase.instructionFormat' can override the
default 'oneline' format of the rebase instruction list.
Since the list is parsed using the left, right or boundary mark plus
the sha1, they are prepended to the instruction format.
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" fired post-rewrite hook when it shouldn't (namely,
when it was told to stop sequencing with 'exec' insn).
* mm/rebase-i-post-rewrite-exec:
t5407: use <<- to align the expected output
rebase -i: fix post-rewrite hook with failed exec command
rebase -i: demonstrate incorrect behavior of post-rewrite
Usually, when 'git rebase' stops before completing the rebase, it is to
give the user an opportunity to edit a commit (e.g. with the 'edit'
command). In such cases, 'git rebase' leaves the sha1 of the commit being
rewritten in "$state_dir"/stopped-sha, and subsequent 'git rebase
--continue' will call the post-rewrite hook with this sha1 as <old-sha1>
argument to the post-rewrite hook.
The case of 'git rebase' stopping because of a failed 'exec' command is
different: it gives the opportunity to the user to examine or fix the
failure, but does not stop saying "here's a commit to edit, use
--continue when you're done". So, there's no reason to call the
post-rewrite hook for 'exec' commands. If the user did rewrite the
commit, it would be with 'git commit --amend' which already called the
post-rewrite hook.
Fix the behavior to leave no stopped-sha file in case of failed exec
command, and teach 'git rebase --continue' to skip record_in_rewritten if
no stopped-sha file is found.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" moved the "current" command from "todo" to "done" a
bit too prematurely, losing a step when a "pick" did not even start.
* ph/rebase-i-redo:
rebase -i: redo tasks that die during cherry-pick
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
When rebase--interactive processes a task, it removes the item from
the todo list and appends it to another list of executed tasks. If a
pick (this includes squash and fixup) fails before the index has
recorded the changes, take the corresponding item and put it on the todo
list again. Otherwise, the changes introduced by the scheduled commit
would be lost.
That kind of decision is possible since the cherry-pick command
signals why it failed to apply the changes of the given commit. Either
the changes are recorded in the index using a conflict (return value 1)
and rebase does not continue until they are resolved or the changes
are not recorded in the index (return value neither 0 nor 1) and
rebase has to try again with the same task.
Add a test cases for regression testing to the "rebase-interactive"
test suite.
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Signed-off-by: Phil Hord <hordp@cisco.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" recently started to include the number of
commits in the insn sheet to be processed, but on a platform
that prepends leading whitespaces to "wc -l" output, the numbers
are shown with extra whitespaces that aren't necessary.
* es/rebase-i-count-todo:
rebase-interactive: re-word "item count" comment
rebase-interactive: suppress whitespace preceding item count
"git rebase -i" recently started to include the number of
commits in the insn sheet to be processed, but on a platform
that prepends leading whitespaces to "wc -l" output, the numbers
are shown with extra whitespaces that aren't necessary.
* es/rebase-i-count-todo:
rebase-interactive: re-word "item count" comment
rebase-interactive: suppress whitespace preceding item count
Junio C Hamano
Alex Henrie
Ralf Thielow
Jean-Noel Avila
Jeff King
Johannes Sixt
Patrick Steinhardt
Vasco Almeida
Ed Maste
Fabian Ruch
Fredrik Medley
Matthieu Moy
Galan Rémi
Johannes Schindelin
Michael Rappazzo
Phil Hord