"git am --short-current-patch" is a way to show the piece of e-mail
for the stopped step, which is not suitable to directly feed "git
apply" (it is designed to be a good "git am" input). It learned a
new option to show only the patch part.
* pb/am-show-current-patch:
am: support --show-current-patch=diff to retrieve .git/rebase-apply/patch
am: support --show-current-patch=raw as a synonym for--show-current-patch
am: convert "resume" variable to a struct
parse-options: convert "command mode" to a flag
parse-options: add testcases for OPT_CMDMODE()
"git rebase" has learned to use the merge backend (i.e. the
machinery that drives "rebase -i") by default, while allowing
"--apply" option to use the "apply" backend (e.g. the moral
equivalent of "format-patch piped to am"). The rebase.backend
configuration variable can be set to customize.
* en/rebase-backend:
rebase: rename the two primary rebase backends
rebase: change the default backend from "am" to "merge"
rebase: make the backend configurable via config setting
rebase tests: repeat some tests using the merge backend instead of am
rebase tests: mark tests specific to the am-backend with --am
rebase: drop '-i' from the reflog for interactive-based rebases
git-prompt: change the prompt for interactive-based rebases
rebase: add an --am option
rebase: move incompatibility checks between backend options a bit earlier
git-rebase.txt: add more details about behavioral differences of backends
rebase: allow more types of rebases to fast-forward
t3432: make these tests work with either am or merge backends
rebase: fix handling of restrict_revision
rebase: make sure to pass along the quiet flag to the sequencer
rebase, sequencer: remove the broken GIT_QUIET handling
t3406: simplify an already simple test
rebase (interactive-backend): fix handling of commits that become empty
rebase (interactive-backend): make --keep-empty the default
t3404: directly test the behavior of interest
git-rebase.txt: update description of --allow-empty-message
These options are available since git v2.15, but somehow
eluded from the completion script.
Note that while --color-moved-ws= accepts comma-separated
list of values, there is no (easy?) way to make it work
with completion (see e.g. [1]).
[1]: https://github.com/scop/bash-completion/issues/240
Acked-by: Matheus Tavares Bernardino <matheus.bernardino@usp.br>
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output of "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable
or base64. Add a new mode to "git am --show-current-patch" in order to
straighten the suggestion.
Reported-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable or
base64. To simplify worktree operations and to avoid that users poke into
.git, it would be better if "git am" also provided a mode that copies
.git/rebase-merge/patch to stdout.
One possibility could be to have completely separate options, introducing
for example --show-current-message (for .git/rebase-apply/NNNN)
and --show-current-diff (for .git/rebase-apply/patch), while possibly
deprecating --show-current-patch.
That would even remove the need for the first two patches in the series.
However, the long common prefix would have prevented using an abbreviated
option such as "--show". Therefore, I chose instead to add a string
argument to --show-current-patch. The new argument is optional, so that
"git am --show-current-patch"'s behavior remains backwards-compatible.
The next choice to make is how to handle multiple --show-current-patch
options. Right now, something like "git am --abort --show-current-patch"
is rejected, and the previous suggestion would likewise have naturally
rejected a command line like
git am --show-current-message --show-current-diff
Therefore, I decided to also reject for example
git am --show-current-patch=diff --show-current-patch=raw
In other words the whole of --show-current-patch=xxx (including the
optional argument) is treated as the command mode. I found this to be
more consistent and intuitive, even though it differs from the usual
"last one wins" semantics of the git command line.
Add the code to parse submodes based on the above design, where for now
"raw" is the only valid submode. "raw" prints the full e-mail message
just like "git am --show-current-patch".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the past, we had different prompts for different types of rebases:
REBASE: for am-based rebases
REBASE-m: for merge-based rebases
REBASE-i: for interactive-based rebases
It's not clear why this distinction was necessary or helpful; when the
prompt was added in commit e75201963f ("Improve bash prompt to detect
various states like an unfinished merge", 2007-09-30), it simply added
these three different types. Perhaps there was a useful purpose back
then, but there have been some changes:
* The merge backend was deleted after being implemented on top of the
interactive backend, causing the prompt for merge-based rebases to
change from REBASE-m to REBASE-i.
* The interactive backend is used for multiple different types of
non-interactive rebases, so the "-i" part of the prompt doesn't
really mean what it used to.
* Rebase backends have gained more abilities and have a great deal of
overlap, sometimes making it hard to distinguish them.
* Behavioral differences between the backends have also been ironed
out.
* We want to change the default backend from am to interactive, which
means people would get "REBASE-i" by default if we didn't change
the prompt, and only if they specified --am or --whitespace or -C
would they get the "REBASE" prompt.
* In the future, we plan to have "--whitespace", "-C", and even "--am"
run the interactive backend once it can handle everything the
am-backend can.
For all these reasons, make the prompt for any type of rebase just be
"REBASE".
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion (in contrib/) learned to complete
subcommands and arguments to "git worktree".
* sg/completion-worktree:
completion: list paths and refs for 'git worktree add'
completion: list existing working trees for 'git worktree' subcommands
completion: simplify completing 'git worktree' subcommands and options
completion: return the index of found word from __git_find_on_cmdline()
completion: clean up the __git_find_on_cmdline() helper function
t9902-completion: add tests for the __git_find_on_cmdline() helper
Sample credential helper for using .netrc has been updated to work
out of the box.
* dl/credential-netrc:
contrib/credential/netrc: work outside a repo
contrib/credential/netrc: make PERL_PATH configurable
With the upgrade, the library names changed from libeay32/ssleay32 to
libcrypto/libssl.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complete paths after 'git worktree add <TAB>' and refs after 'git
worktree add -b <TAB>' and 'git worktree add some/dir <TAB>'.
Uncharacteristically for a Git command, 'git worktree add' takes a
mandatory path parameter before a commit-ish as its optional last
parameter. In addition, it has both standalone --options and options
with a mandatory unstuck parameter ('-b <new-branch>'). Consequently,
trying to complete refs for that last optional commit-ish parameter
resulted in a more convoluted than usual completion function, but
hopefully all the included comments will make it not too hard to
digest.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complete the paths of existing working trees for 'git worktree's
'move', 'remove', 'lock', and 'unlock' subcommands.
Note that 'git worktree list --porcelain' shows absolute paths, so for
simplicity's sake we'll complete full absolute paths as well (as
opposed to turning them into relative paths by finding common leading
directories between $PWD and the working tree's path and removing
them, risking trouble with symbolic links or Windows drive letters; or
completing them one path component at a time).
Never list the path of the main working tree, as it cannot be moved,
removed, locked, or unlocked.
Ideally we would only list unlocked working trees for the 'move',
'remove', and 'lock' subcommands, and only locked ones for 'unlock'.
Alas, 'git worktree list --porcelain' doesn't indicate which working
trees are locked, so for now we'll complete the paths of all existing
working trees.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion function for 'git worktree' uses separate but very
similar case arms to complete --options for each subcommand.
Combine these into a single case arm to avoid repetition.
Note that after this change we won't complete 'git worktree remove's
'--force' option, but that is consistent with our general stance on
not offering '--force', as it should be used with care.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the __git_find_on_cmdline() helper function so far we've
only been interested in which one of a set of words appear on the
command line. To complete options for some of 'git worktree's
subcommands in the following patches we'll need not only that, but the
index of that word on the command line as well.
Extend __git_find_on_cmdline() to optionally show the index of the
found word on the command line (IOW in the $words array) when the
'--show-idx' option is given.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __git_find_on_cmdline() helper function started its life as
__git_find_subcommand() [1], but it served a more general purpose than
looking for subcommands, so later it was renamed accordingly [2].
However, that rename didn't touch the body of the function, and left
the $subcommand local variable behind, still reminiscent of the
function's original purpose.
Let's clean up the names of __git_find_on_cmdline()'s local variables
and get rid of that $subcommand variable name.
While at it, add a short comment describing the function's purpose.
[1] 3ff1320d4b (bash: refactor searching for subcommands on the
command line, 2008-03-10),
[2] 918c03c2a7 (bash: rename __git_find_subcommand() to
__git_find_on_cmdline(), 2009-09-15)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git-credential-netrc does not work outside of a git
repository. It fails with the following error:
fatal: Not a git repository: . at /usr/share/perl5/Git.pm line 214.
There is no real reason why need to be within a repository, though.
Credential helpers should be able to work just fine outside the
repository as well.
Call the non-self version of config() so that git-credential-netrc no
longer needs to be run within a repository.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shebang path for the Perl interpreter in git-credential-netrc was
hardcoded. However, some users may have it located at a different
location and thus, would have had to manually edit the script.
Add a .perl prefix to the script to denote it as a template and ignore
the generated version. Augment the Makefile so that it generates
git-credential-netrc from git-credential-netrc.perl, just like other
Perl scripts.
The Makefile recipes were shamelessly stolen from
contrib/mw-to-git/Makefile.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" family learned "--pretty=reference" that gives the name
of a commit in the format that is often used to refer to it in log
messages.
* dl/pretty-reference:
SubmittingPatches: use `--pretty=reference`
pretty: implement 'reference' format
pretty: add struct cmt_fmt_map::default_date_mode_type
pretty: provide short date format
t4205: cover `git log --reflog -z` blindspot
pretty.c: inline initalize format_context
revision: make get_revision_mark() return const pointer
completion: complete `tformat:` pretty format
SubmittingPatches: remove dq from commit reference
pretty-formats.txt: use generic terms for hash
SubmittingPatches: use generic terms for hash
The completion script (in contrib/) has been taught that "git svn"
supports the "--recursive" option.
* js/complete-svn-recursive:
completion: tab-complete "git svn --recursive"
The completion script (in contrib/) learned that the "--onto"
option of "git rebase" can take its argument as the value of the
option.
* dl/complete-rebase-onto:
completion: learn to complete `git rebase --onto=`
The standard format for referencing other commits within some projects
(such as git.git) is the reference format. This is described in
Documentation/SubmittingPatches as
If you want to reference a previous commit in the history of a stable
branch, use the format "abbreviated hash (subject, date)", like this:
....
Commit f86a374 (pack-bitmap.c: fix a memleak, 2015-03-30)
noticed that ...
....
Since this format is so commonly used, standardize it as a pretty
format.
The tests that are implemented essentially show that the format-string
does not change in response to various log options. This is useful
because, for future developers, it shows that we've considered the
limitations of the "canned format-string" approach and we are fine with
them.
Based-on-a-patch-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's only a single caller left of sha1_to_hex(), since everybody
that has an object name in "unsigned char[]" now uses hash_to_hex()
instead.
This case is in the sha1dc wrapper, where we print a hex sha1 when
we find a collision. This one will always be sha1, regardless of the
current hash algorithm, so we can't use hash_to_hex() here. In
practice we'd probably not be running sha1 at all if it isn't the
current algorithm, but it's possible we might still occasionally
need to compute a sha1 in a post-sha256 world.
Since sha1_to_hex() is just a wrapper for hash_to_hex_algop(), let's
call that ourselves. There's value in getting rid of the sha1-specific
wrapper to de-clutter the global namespace, and to make sure nobody uses
it (and as with sha1_to_hex_r() in the previous patch, we'll drop the
coccinelle transformations, too).
The sha1_to_hex() function is mentioned in a comment; we can easily
swap that out for oid_to_hex() to give a better example. Also
update the comment that was left stale when we added "struct
object_id *" as a way to name an object and added functions to
convert it to hex.
The function is also mentioned in some test vectors in t4100, but
that's not runnable code, so there's no point in trying to clean it
up.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2b9bd488ae ("completion: teach rebase to use __gitcomp_builtin",
2019-09-12), the completion script learned to complete rebase using
__gitcomp_builtin(). However, this resulted in `--onto=` being suggested
instead of `--onto `.
Before, when there was a space, we'd start a new word and, as a result,
fallback to __git_complete_refs() and `--onto` would be completed this
way. However, now we match the `--*` case which does not know how to
offer completions for refs.
Teach _git_rebase() to complete refs in the `--onto=` case so that we
fix this regression.
Reported-by: Paul Jolly <paul@myitcv.io>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left; everybody uses oid_to_hex_r() or
hash_to_hex_algop_r(). This used to actually be the underlying
implementation for oid_to_hex_r(), but that's no longer the case since
47edb64997 (hex: introduce functions to print arbitrary hashes,
2018-11-14).
Let's get rid of it to de-clutter and to make sure nobody uses it.
Likewise we can drop the coccinelle rules that mention it, since the
compiler will make it quite clear that the code does not work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have several modules originally taken from some upstream source,
and which as far as I can tell we no longer update from the upstream
anymore. As such, I have not submitted these spelling fixes to any
external projects but just include them directly here.
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, in the event that a submodule's upstream URL changes, users
have to manually alter the URL in the .gitmodules file then run
`git submodule sync`. Let's make that process easier.
Teach submodule the set-url subcommand which will automatically change
the `submodule.$name.url` property in the .gitmodules file and then run
`git submodule sync` to complete the process.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The installation instruction for zsh completion script (in
contrib/) has been a bit improved.
* mb/clarify-zsh-completion-doc:
completion: clarify installation instruction for zsh
The original comment does not describe type of ~/.zsh/_git explicitly
and zsh does not warn or fail if a user create it as a dictionary.
So unexperienced users could be misled by the original comment.
There is a small update to clarify it.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Maxim Belsky <public.belsky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the indent from
"<tab><sp><sp><sp><sp><sp><sp><sp><sp>"
to
"<tab><tab>"
so that the statement lines up with the rest of the block.
Signed-off-by: Norman Rasmussen <norman@rasmussen.co.za>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CI updates.
* js/azure-pipelines-msvc:
ci: also build and test with MS Visual Studio on Azure Pipelines
ci: really use shallow clones on Azure Pipelines
tests: let --immediate and --write-junit-xml play well together
test-tool run-command: learn to run (parts of) the testsuite
vcxproj: include more generated files
vcxproj: only copy `git-remote-http.exe` once it was built
msvc: work around a bug in GetEnvironmentVariable()
msvc: handle DEVELOPER=1
msvc: ignore some libraries when linking
compat/win32/path-utils.h: add #include guards
winansi: use FLEX_ARRAY to avoid compiler warning
msvc: avoid using minus operator on unsigned types
push: do not pretend to return `int` from `die_push_simple()`
The hg-to-git script (in contrib/) has been updated to work with
Python 3.
* hb/hg-to-git-py3:
hg-to-git: make it compatible with both python3 and python2
The command line completion for "git archive" and "git rebase" are
now made less prone to go out of sync with the binary.
* dl/complete-rebase-and-archive:
completion: teach archive to use __gitcomp_builtin
completion: teach rebase to use __gitcomp_builtin
Assigning hashmap_entry.hash manually leaves hashmap_entry.next
uninitialized, which can be dangerous once the hashmap_entry is
inserted into a hashmap. Detect those assignments and use
hashmap_entry_init, instead.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b18ae14a8f (vcxproj: also link-or-copy builtins, 2019-07-29), we
started to copy or hard-link the built-ins as a post-build step of the
`git` project.
At the same time, we tried to copy or hard-link `git-remote-http.exe`,
but it is quite possible that it was not built at that time.
Let's move that latter task into a post-install step of the
`git-remote-http` project instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>