Historically we did not allow binary patch applied without an
explicit permission from the user, and this flag was the way to
do so. This makes the flag a no-op by always allowing binary
patch application.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If GIT_TRACE is set to an absolute path (starting with a
'/' character), we interpret this as a file path and we
trace into it.
Also if GIT_TRACE is set to an integer value greater than
1 and lower than 10, we interpret this as an open fd value
and we trace into it.
Note that this behavior is not compatible with the
previous one.
We also trace whole messages using one write(2) call to
make sure messages from processes do net get mixed up in
the middle.
This patch makes it possible to get trace information when
running "make test".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The intention of the test seems to be to build a long chain of
clones that locally borrow objects from their parents and see the
system give up dereferencing long chains. There were two problems:
(1) it did not test the right repository;
(2) it did not build a chain long enough to trigger the limitation.
I do not think it is a good test to make sure the limitation the
current implementation happens to have still exists, but that is
a topic at a totally different level.
At least this fixes the broken test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since the normalized basename of "." is "", the check for directory
failed erroneously.
Noticed by Fredrik Kuivinen.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the new flag "--reject", hunks that do not apply are sent to
the standard output, and the usable hunks are applied. The command
itself exits with non-zero status when this happens, so that the
user or wrapper can take notice and sort the remaining mess out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
finish_connect(): thinkofix
git-mv: succeed even if source is a prefix of destination
Solaris does not support C99 format strings before version 10
As noted by Fredrik Kuivinen, without this patch, git-mv fails on
git-mv README README-renamed
because "README" is a prefix of "README-renamed".
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The binary patch test needs to be made more careful not to have
the postimage blob in the repository in which the patch is applied
Signed-off-by: Junio C Hamano <junkio@cox.net>
By default, the command shows pathnames relative to the current
directory. Use --full-name (the same flag to do so in ls-files)
if you want to see the full pathname relative to the project root.
This makes it very pleasant to run in Emacs compilation (or
"grep-find") buffer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The internal representation of the result is counted string
(i.e. char *buf and ulong size), which is fine for writing out
to regular file, but throwing the buf at symlink(2) was a
no-no.
Reported by Willy Tarreau.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to find the first match of the pattern and then if the
match is not for the entire word, declared that the whole line
does not match.
But that is wrong. The command "git grep -w -e mmap" should
find that a line "foo_mmap bar mmap baz" matches, by tring the
second instance of pattern "mmap" on the same line.
Problems an earlier round of "fix" had were pointed out by Morten
Welinder, which have been incorporated in the t7002 tests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We still have too few of them, but we have to start from somewhere.
The general rule is to make tests easy to debug when run with -v (notice
use of seemingly useless echo everywhere in the new tests).
Signed-off-by: Junio C Hamano <junkio@cox.net>
The cmd_usage() routine was causing warning messages due to a NULL
format parameter being passed in three out of four calls. This is a
problem if you want to compile with -Werror. A simple solution is to
simply remove the GNU __attribute__ format pragma from the cmd_usage()
declaration in the header file. The function interface was somewhat
muddled anyway, so re-write the code to finesse the problem.
[jc: this incidentally revealed that t9100 test assumed that the output
from "git help" to be fixed in stone, but this patch lower-cases
"Usage" to "usage". Update the test not to rely on "git help" output.]
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These changes were originally part of the next patch, but have been
split out since they were peripheral to the main purpose of that patch.
- update comment describing the signature format to reflect
the current code.
- remove trailing \n in calls to error(), since a \n is already
provided by error().
- remove redundant call to get_sha1_hex().
- call sha1_to_hex(sha1) to convert to ascii, rather than attempting
to print the raw sha1.
The new tests provide a regression suite to support the modifications
to git-mktag in this and the next patch.
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The t8001-annotate.sh test claimed all tests pass, when in fact
the git-annotate perl script failed to run! (prior to fixing the
script to work with perl 5.5).
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Alex Riesen (raa.lkml@gmail.com) recently observed that git branch
would fail with no error message due to unexpected situations with
regards to refs. For example, if .git/refs/heads/gu is a file but
"git branch -b refs/heads/gu/fixa HEAD" was invoked by the user
it would fail silently due to refs/heads/gu being a file and not
a directory.
This change adds a test for trying to create a ref within a directory
that is actually currently a file, and adds error printing within
the ref locking routine should the resolve operation fail.
The error printing code probably belongs at this level of the library
as other failures within the ref locking, writing and logging code
are also currently at this level of the code.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The generated binary patch was _not_ binary -- earlier I made
the --full-index flag to imply binary patch generation to the diff
machinery, but later we made it independent from --binary (although
the latter implies the former).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes the builtin mv for the test which Josef provided, and also
fixes moving directories into existing directories, as noted by Jon Smirl.
In case the destination exists, fail early (this cannot be overridden
by -f).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If dir2 already exists, git-mv should move dir1 _into_dir2/.
Noticed by Jon Smirl.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* ew/apply:
Fix t4114 on cygwin
apply: handle type-changing patch correctly.
apply: split out removal and creation into different phases.
apply: check D/F conflicts more carefully.
typechange tests for git apply (currently failing)
Linus:
get_pathspec() does turn '.' into an empty string (which is
correct - git internally does _not_ ever understand the notion of
"." as the current working directory), but it doesn't ever do the
optimization of noticing that a pathspec that consists solely of
an empty string is "equivalent" to an empty pathspec.
The test is to ensure that this behaviour stays.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I've found that git apply is incapable of handling patches
involving object type changes to the same path.
Of course git itself is perfectly capable of making commits that
generate these changes, as it only tracks trees states. It's
just that the diffs between them are less useful if they can't
be applied.
Some of these are rare, but I've hit one of them (file becoming
a symlink) recently in real-world usage, and was inspired to
find more potential breakages :)
I'm not sure when I'll have time to fix these myself and I'm not
very familiar with the apply code. So if someone could get
some or all of these cases working, they would be my hero :)
Some of these are what I would refer to as corner-cases from
hell. Most (if not all) other systems fail some of these. In
fact, they aren't even capable of representing most of these
changes in their histories; much less being able to handle
patches to that effect.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes one test commit in the sequence to have more than
one lines of commit log. A few output formats (--pretty=email
aka format-patch and --pretty=oneline) need to behave
differently on single and multi-line log, and this change will
help catching breakages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* ml/trace:
test-lib: unset GIT_TRACE
GIT_TRACE: fix a mixed declarations and code warning
GIT_TRACE: show which built-in/external commands are executed
This way we don't have to remember to set it for each test; and
if we forget, we won't cause interactive editors to be spawned
for non-interactive tests.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If committing a merge (.git/MERGE_HEAD exists), an initial tree
(no HEAD) or using --amend to amend the prior commit then denote
the subtype of commit in the reflog. This helps to distinguish
amended or merge commits from normal commits.
In the case of --amend the prior sha1 is probably the commit which
is being thrown away in favor of the new commit. Since it is likely
that the old commit doesn't have any ref pointing to it anymore
it can be interesting to know why that the commit was replaced
and orphaned.
In the case of a merge the prior sha1 is probably the first parent
of the new merge commit. Consequently having its prior sha1 in the
reflog is slightly less interesting but its still informative to
know the commit was the result of a merge which had to be completed
by hand.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Check for SVN::Core so test 910[45] don't fail if the user
doesn't have those installed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow NO_SVN_TESTS to be defined to skip git-svn tests. These
tests are time-consuming due to SVN being slow, and even more so
if SVN Perl libraries are not available.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* th/diff:
builtin-diff: turn recursive on when defaulting to --patch format.
t4013: note improvements brought by the new output code.
t4013: add format-patch tests.
format-patch: fix diff format option implementation
combine-diff.c: type sanity.
t4013 test updates for new output code.
Fix some more diff options changes.
Fix diff-tree -s
log --raw: Don't descend into subdirectories by default
diff-tree: Use ---\n as a message separator
Print empty line between raw, stat, summary and patch
t4013: add more tests around -c and --cc
whatchanged: Default to DIFF_FORMAT_RAW
Don't xcalloc() struct diffstat_t
Add msg_sep to diff_options
DIFF_FORMAT_RAW is not default anymore
Set default diff output format after parsing command line
Make --raw option available for all diff commands
Merge with_raw, with_stat and summary variables to output_format
t4013: add tests for diff/log family output options.
As long as we do not need to readline from the terminal, we
should not barf when starting up the program. Without this
patch, t9001 test on Cygwin occasionally died with the following
error message:
Unable to get Terminal Size. The TIOCGWINSZ ioctl didn't work. The COLUMNS and LINES environment variables didn't work. The resize program didn't work. at /usr/lib/perl5/vendor_perl/5.8/cygwin/Term/ReadKey.pm line 362.
Compilation failed in require at /usr/lib/perl5/vendor_perl/5.8/Term/ReadLine/Perl.pm line 58.
Acked-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano
Christian Couder
Johannes Schindelin
Ramsay Allan Jones
Shawn Pearce
Josef Weidendorfer
Alex Riesen
Eric Wong
Pavel Roskin
A Large Angry SCM