* jn/paginate-fix:
git --paginate: paginate external commands again
git --paginate: do not commit pager choice too early
tests: local config file should be honored from subdirs of toplevel
t7006: test pager configuration for several git commands
t7006 (pager): introduce helper for parameterized tests
Conflicts:
t/t7006-pager.sh
73e25e7c (git --paginate: do not commit pager choice too early,
2010-06-26) failed to take some cases into account.
1b. Builtins that do not use RUN_SETUP (like git config) do
not find GIT_DIR set correctly when the pager is launched
from run_builtin(). So the core.pager configuration is
not honored from subdirectories of the toplevel for them.
4a. External git commands (like git request-pull) relied on the
early pager launch to take care of handling the -p option.
Ever since 73e25e7c, they do not honor the -p option at all.
4b. Commands invoked through ! aliases (like ls) were also relying
on the early pager launch.
Fix (4a) by launching the pager (if requested) before running such a
“dashed external”. For simplicity, this still does not search for a
.git directory before running the external command; when run from a
subdirectory of the toplevel, therefore, the “[core] pager”
configuration is still not honored.
Fix (4b) by launching pager if requested before carrying out such an
alias. Actually doing this has no effect, since the pager (if any)
would have already been launched in a failed attempt to try a
dashed external first. The choice-of-pager-not-honored-from-
subdirectory bug still applies here, too.
(1b) is not a regression. There is no need to fix it yet.
Noticed by Junio.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git is passed the --paginate option, starting up a pager requires
deciding what pager to start, which requires access to the core.pager
configuration.
At the relevant moment, the repository has not been searched for yet.
Attempting to access the configuration at this point results in
git_dir being set to .git [*], which is almost certainly not what was
wanted. In particular, when run from a subdirectory of the toplevel,
git --paginate does not respect the core.pager setting from the
current repository.
[*] unless GIT_DIR or GIT_CONFIG is set
So delay the pager startup when possible:
1. run_argv() already commits pager choice inside run_builtin() if a
command is found. For commands that use RUN_SETUP, waiting until
then fixes the problem described above: once git knows where to
look, it happily respects the core.pager setting.
2. list_common_cmds_help() prints out 29 lines and exits. This can
benefit from pagination, so we need to commit the pager choice
before writing this output.
Luckily ‘git’ without subcommand has no other reason to access a
repository, so it would be intuitive to ignore repository-local
configuration in this case. Simpler for now to choose a pager
using the funny code that notices a repository that happens to be
at .git. That this accesses a repository when it is very
convenient to is a bug but not an important one.
3. help_unknown_cmd() prints out a few lines to stderr. It is not
important to paginate this, so don’t.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds an option to open the matching files in the pager, and if the
pager happens to be "less" (or "vi") and there is only one grep pattern,
it also jumps to the first match right away.
The short option was chose as '-O' to avoid clashes with GNU grep's
options (as suggested by Junio).
So, 'git grep -O abc' is a short form for 'less +/abc $(grep -l abc)'
except that it works also with spaces in file names, and it does not
start the pager if there was no matching file.
[jn: rebased and added tests; with error handling fix from Junio
squashed in]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The values passed this way will override whatever is defined
in the config files.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/notes: (33 commits)
Documentation: fix a few typos in git-notes.txt
notes: fix malformed tree entry
builtin-notes: Minor (mostly parse_options-related) fixes
builtin-notes: Add "copy" subcommand for copying notes between objects
builtin-notes: Misc. refactoring of argc and exit value handling
builtin-notes: Add -c/-C options for reusing notes
builtin-notes: Refactor handling of -F option to allow combining -m and -F
builtin-notes: Deprecate the -m/-F options for "git notes edit"
builtin-notes: Add "append" subcommand for appending to note objects
builtin-notes: Add "add" subcommand for adding notes to objects
builtin-notes: Add --message/--file aliases for -m/-F options
builtin-notes: Add "list" subcommand for listing note objects
Documentation: Generalize git-notes docs to 'objects' instead of 'commits'
builtin-notes: Add "prune" subcommand for removing notes for missing objects
Notes API: prune_notes(): Prune notes that belong to non-existing objects
t3305: Verify that removing notes triggers automatic fanout consolidation
builtin-notes: Add "remove" subcommand for removing existing notes
Teach builtin-notes to remove empty notes
Teach notes code to properly preserve non-notes in the notes tree
t3305: Verify that adding many notes with git-notes triggers increased fanout
...
Conflicts:
Makefile
If GIT_ASKPASS is not set and SSH_ASKPASS set, GIT_ASKPASS will
use SSH_ASKPASS.
Signed-off-by: Frank Li <lznuaa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare 1.7.0.1 release notes
Fix use of mutex in threaded grep
dwim_ref: fix dangling symref warning
stash pop: remove 'apply' options during 'drop' invocation
diff: make sure --output=/bad/path is caught
Remove hyphen from "git-command" in two error messages
* maint-1.6.6:
dwim_ref: fix dangling symref warning
stash pop: remove 'apply' options during 'drop' invocation
diff: make sure --output=/bad/path is caught
Remove hyphen from "git-command" in two error messages
The builtin-ification includes some minor behavioural changes to the
command-line interface: It is no longer allowed to mix the -m and -F
arguments, and it is not allowed to use multiple -F options.
As part of the builtin-ification, we add the commit_notes() function
to the builtin API. This function (together with the notes.h API) can
be easily used from other builtins to manipulate the notes tree.
Also includes needed changes to t3301.
This patch has been improved by the following contributions:
- Stephen Boyd: Use die() instead of fprintf(stderr, ...) followed by exit(1)
Cc: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that we have bad interaction with the code related to
GIT_WORK_TREE and "grep --no-index", and broke running grep inside
the .git directory. For now, just revert it and resurrect it after
1.7.0 ships.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This required some fairly trivial packfile function 'const' cleanup,
since the builtin commands get a const char *argv[] array.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ap/merge-backend-opts:
Document that merge strategies can now take their own options
Extend merge-subtree tests to test -Xsubtree=dir.
Make "subtree" part more orthogonal to the rest of merge-recursive.
pull: Fix parsing of -X<option>
Teach git-pull to pass -X<option> to git-merge
git merge -X<option>
git-merge-file --ours, --theirs
Conflicts:
git-compat-util.h
Teach "-X <option>" command line argument to "git merge" that is passed to
strategy implementations. "ours" and "theirs" autoresolution introduced
by the previous commit can be asked to the recursive strategy.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the call to setup_git_directory() for running "grep" from
the "git" wrapper to the implementation of the "grep" subcommand. A
new variable "use_index" is always true at this stage in the series,
and when it is on, we require that we are in a directory that is under
git control. To make sure we die the same way, we make a second call
into setup_git_directory() when we detect this situation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/replace:
Documentation: talk a little bit about GIT_NO_REPLACE_OBJECTS
Documentation: fix typos and spelling in replace documentation
replace: use a GIT_NO_REPLACE_OBJECTS env variable
This has the same effect as --no-replace-objects option; git ignores the
replace refs. When --no-replace-objects option is passed to git, this
environment variable is set to "1" and exported to subprocesses in order
to propagate the same setting.
It is useful for example for scripts, as the git commands used in them can
now be aware that they must not read replace refs.
Tested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need for "git <command> -h" to depend on being inside
a repository.
Reported by Gerfried Fuchs through http://bugs.debian.org/462557
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-fetch was builtin-ized, the previous script was moved to
contrib/examples. Now, it is the sole remaining user for
'git fetch--tool'.
The fetch--tool code is still worth keeping around so people can
try out the old git-fetch.sh, for example when investigating
regressions from the builtinifaction.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dae556b (environment: add global variable to disable replacement)
adds a variable to enable/disable replacement, and it is enabled by
default for most commands.
So there is no way to disable it for some commands, which is annoying
when we want to get information about a commit that has been replaced.
For example:
$ git cat-file -p N
would output information about the replacement commit if commit N is
replaced.
With the "--no-replace-objects" option that this patch adds it is
possible to get information about the original commit using:
$ git --no-replace-objects cat-file -p N
While at it, let's add some documentation about this new option in the
"git replace" man page too.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/vcs-helper:
Makefile: remove remnant of separate http/https/ftp helpers
Use a clearer style to issue commands to remote helpers
Make the "traditionally-supported" URLs a special case
Makefile: install hardlinks for git-remote-<scheme> supported by libcurl if possible
Makefile: do not link three copies of git-remote-* programs
Makefile: git-http-fetch does not need expat
http-fetch: Fix Makefile dependancies
Add transport native helper executables to .gitignore
git-http-fetch: not a builtin
Use an external program to implement fetching with curl
Add support for external programs for handling native fetches
It's now similar wrapped the same way as in Documentation/git.txt, and
fits in a 67 characters wide terminal.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert git update-server-info to a built-in command and use parseopt.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
* js/run-command-updates:
api-run-command.txt: describe error behavior of run_command functions
run-command.c: squelch a "use before assignment" warning
receive-pack: remove unnecessary run_status report
run_command: report failure to execute the program, but optionally don't
run_command: encode deadly signal number in the return value
run_command: report system call errors instead of returning error codes
run_command: return exit code as positive value
MinGW: simplify waitpid() emulation macros
This splits up git-http-fetch so that it isn't built-in.
It also removes the general dependency on curl, because it is no
longer used by any built-in code. Because they are no longer LIB_OBJS,
add LIB_H to the dependencies of http-related object files, and remove
http.h from the dependencies of transport.o
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/die_errno:
Use die_errno() instead of die() when checking syscalls
Convert existing die(..., strerror(errno)) to die_errno()
die_errno(): double % in strerror() output just in case
Introduce die_errno() that appends strerror(errno) to die()
In the case where a program was not found, it was still the task of the
caller to report an error to the user. Usually, this is an interesting case
but only few callers actually reported a specific error (though many call
sites report a generic error message regardless of the cause).
With this change the error is reported by run_command, but since there is
one call site in git.c that does not want that, an option is added to
struct child_process, which is used to turn the error off.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The motivation for this change is that system call failures are serious
errors that should be reported to the user, but only few callers took the
burden to decode the error codes that the functions returned into error
messages.
If at all, then only an unspecific error message was given. A prominent
example is this:
$ git upload-pack . | :
fatal: unable to run 'git-upload-pack'
In this example, git-upload-pack, the external command invoked through the
git wrapper, dies due to SIGPIPE, but the git wrapper does not bother to
report the real cause. In fact, this very error message is copied to the
syslog if git-daemon's client aborts the connection early.
With this change, system call failures are reported immediately after the
failure and only a generic failure code is returned to the caller. In the
above example the error is now to the point:
$ git upload-pack . | :
error: git-upload-pack died of signal
Note that there is no error report if the invoked program terminated with
a non-zero exit code, because it is reasonable to expect that the invoked
program has already reported an error. (But many run_command call sites
nevertheless write a generic error message.)
There was one special return code that was used to identify the case where
run_command failed because the requested program could not be exec'd. This
special case is now treated like a system call failure with errno set to
ENOENT. No error is reported in this case, because the call site in git.c
expects this as a normal result. Therefore, the callers that carefully
decoded the return value still check for this condition.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a general guideline, functions in git's code return zero to indicate
success and negative values to indicate failure. The run_command family of
functions followed this guideline. But there are actually two different
kinds of failure:
- failures of system calls;
- non-zero exit code of the program that was run.
Usually, a non-zero exit code of the program is a failure and means a
failure to the caller. Except that sometimes it does not. For example, the
exit code of merge programs (e.g. external merge drivers) conveys
information about how the merge failed, and not all exit calls are
actually failures.
Furthermore, the return value of run_command is sometimes used as exit
code by the caller.
This change arranges that the exit code of the program is returned as a
positive value, which can now be regarded as the "result" of the function.
System call failures continue to be reported as negative values.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason, MinGW's bash cannot reliably detect failure of the child
process if a negative value is passed to exit(). This fixes it by
truncating the exit code in all calls of exit().
This issue was worked around in run_builtin() of git.c (2488df84 builtin
run_command: do not exit with -1, 2007-11-15). This workaround is no longer
necessary and is reverted.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a new argv array from a configured alias and the supplied
command line arguments, the new argv was allocated with one element too
many. Since the first element of the original argv array is skipped when
copying it to the new_argv, the number of elements that are allocated
should be reduced by one. 'count' is the number of elements that new_argv
contains, and *argcp is the number of elements in the original argv array.
So the total allocation (including the terminating NULL entry) for the
new_argv array should be:
count + (*argcp - 1) + 1
Also, the explicit assignment of the NULL terminating entry can be avoided
by just copying it over from the original argv array.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command can only be used now to list replace refs in
"refs/replace/" and to delete them.
The option to list replace refs is "-l".
The option to delete replace refs is "-d".
The behavior should be consistent with how "git tag" and "git branch"
are working.
The code has been copied from "builtin-tag.c" by Kristian Høgsberg
<krh@redhat.com> and Carlos Rica <jasampler@gmail.com> that was itself
based on git-tag.sh and mktag.c by Linus Torvalds.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Essentially; s/type* /type */ as per the coding guidelines.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/bisect-filter: (21 commits)
rev-list: add "int bisect_show_flags" in "struct rev_list_info"
rev-list: remove last static vars used in "show_commit"
list-objects: add "void *data" parameter to show functions
bisect--helper: string output variables together with "&&"
rev-list: pass "int flags" as last argument of "show_bisect_vars"
t6030: test bisecting with paths
bisect: use "bisect--helper" and remove "filter_skipped" function
bisect: implement "read_bisect_paths" to read paths in "$GIT_DIR/BISECT_NAMES"
bisect--helper: implement "git bisect--helper"
bisect: use the new generic "sha1_pos" function to lookup sha1
rev-list: call new "filter_skip" function
patch-ids: use the new generic "sha1_pos" function to lookup sha1
sha1-lookup: add new "sha1_pos" function to efficiently lookup sha1
rev-list: pass "revs" to "show_bisect_vars"
rev-list: make "show_bisect_vars" non static
rev-list: move code to show bisect vars into its own function
rev-list: move bisect related code into its own file
rev-list: make "bisect_list" variable local to "cmd_rev_list"
refs: add "for_each_ref_in" function to refactor "for_each_*_ref" functions
quote: add "sq_dequote_to_argv" to put unwrapped args in an argv array
...
This patch implements a new "git bisect--helper" builtin plumbing
command that will be used to migrate "git-bisect.sh" to C.
We start by implementing only the "--next-vars" option that will
read bisect refs from "refs/bisect/", and then compute the next
bisect step, and output shell variables ready to be eval'ed by
the shell.
At this step, "git bisect--helper" ignores the paths that may
have been put in "$GIT_DIR/BISECT_NAMES". This will be fixed in a
later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used in GUIs to open installed HTML documentation in the
browser.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to simply try calling execvp(); if it succeeded, then we were done
and the new program was running. If it didn't, then we knew that it wasn't
a valid command.
Unfortunately, this interacted badly with the new pager handling. Now that
git remains the parent process and the pager is spawned, git has to hang
around until the pager is finished. We install an atexit handler to do
this, but that handler never gets called if we successfully run execvp.
You could see this behavior by running any dashed external using a pager
(e.g., "git -p stash list"). The command finishes running, but the pager
is still going. In the case of less, it then gets an error reading from
the terminal and exits, potentially leaving the terminal in a broken state
(and not showing the output).
This patch just uses run_command() to try running the dashed external. The
parent git process then waits for the external process to complete and
then handles the pager cleanup as it would for an internal command.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a static function called run_command which
conflicts with the library function in run-command.c; this
isn't a problem currently, but prevents including
run-command.h in git.c.
This patch just renames the static function to something
more specific and non-conflicting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the calling code.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit moves the code that computes the dirname of argv[0]
from git.c's main() to git_set_argv0_path() and renames the function
to git_extract_argv0_path(). This makes the code in git.c's main
less cluttered, and we can use the dirname computation from other
main() functions too.
[ spr:
- split Steve's original commit and wrote new commit message.
- Integrated Johannes Schindelin's
cca1704897 while rebasing onto master.
]
Signed-off-by: Steve Haslam <shaslam@lastminute.com>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
LF at the end of format strings given to die() is redundant because
die already adds one on its own.
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
help_unknown_cmd() is able to autocorrect a command to an alias, and not
only to internal or external commands. However, main() was not passing the
autocorrected command through handle_alias(), hence it failed if it was an
alias.
This commit makes the autocorrected command go through handle_alias(), once
handle_internal_command() and execv_dashed_external() have been tried. Since
this is done twice in main() now, moved that logic to a new run_argv()
function.
Also, print the same "Expansion of alias 'x' failed" message when the alias
was autocorrected, rather than a generic "Failed to run command 'x'".
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not a good practice to prefer performance over readability in
something as performance uncritical as finding the trailing slash
of argv[0].
So avoid head-scratching by making the loop user-readable, and not
hyper-performance-optimized.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This comes from conversation at the GitTogether where we thought it would
be helpful to be able to teach people to 'stage' files because it tends
to cause confusion when told that they have to keep 'add'ing them.
This continues the movement to start referring to the index as a
staging area (eg: the --staged alias to 'git diff'). Also adds a
doc file for 'git stage' that basically points to the docs for
'git add'.
Signed-off-by: Scott Chacon <schacon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* jc/alternate-push:
push: receiver end advertises refs from alternate repositories
push: prepare sender to receive extended ref information from the receiver
receive-pack: make it a builtin
is_directory(): a generic helper function
* maint:
Update release notes for 1.6.0.3
checkout: Do not show local changes when in quiet mode
for-each-ref: Fix --format=%(subject) for log message without newlines
git-stash.sh: don't default to refs/stash if invalid ref supplied
maint: check return of split_cmdline to avoid bad config strings
As the testcase demonstrates, it's possible for split_cmdline to return -1 and
deallocate any memory it's allocated, if the config string is missing an end
quote. In both the cases below, which are the only calling sites, the return
isn't checked, and using the pointer causes a pretty immediate segfault.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some places use the standard malloc/strdup without checking if the
allocation was successful; they should use xmalloc/xstrdup that
check the memory allocation result.
Signed-off-by: Dotan Barak <dotanba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a good thing to do in general, but more importantly, transport
routines can only be used by built-ins, which is what I'll be adding next.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces a modified Damerau-Levenshtein algorithm into
Git's code base, and uses it with the following penalties to show some
similar commands when an unknown command was encountered:
swap = 0, insertion = 1, substitution = 2, deletion = 4
A typical output would now look like this:
$ git sm
git: 'sm' is not a git-command. See 'git --help'.
Did you mean one of these?
am
rm
The cut-off is at similarity rating 6, which was empirically determined
to give sensible results.
As a convenience, if there is only one candidate, Git continues under
the assumption that the user mistyped it. Example:
$ git reabse
WARNING: You called a Git program named 'reabse', which does
not exist.
Continuing under the assumption that you meant 'rebase'
[...]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes "git diff", "git diff-files" and "git diff-index" to work
correctly under worktree setup. Because diff* family works in many modes
and not all of them require worktree, Junio made a nice summary
(with a little modification from me):
* diff-files is about comparing with work tree, so it obviously needs a
work tree;
* diff-index also does, except "diff-index --cached" or "diff --cached TREE"
* no-index is about random files outside git context, so it obviously
doesn't need any work tree;
* comparing two (or more) trees doesn't;
* comparing two blobs doesn't;
* comparing a blob with a random file doesn't;
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit daa0cc9a92.
It was a stupid idea to do this; when run as a log-in shell,
it is spawned with argv[0] set to "-git-shell", so the usual
name-based dispatch would not work to begin with.
This trivially makes "git-shell" a built-in. It makes the executable even
fatter, though.
And MinGW removed git-shell only because of the funny dependencies; there
is no reason to do so anymore.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-on-MinGW-by: Johannes Sixt <johannes.sixt@telecom.at>
We will need the command invocation path in system_path(). This path was
passed to setup_path(), but system_path() can be called earlier, for
example via:
main
commit_pager_choice
setup_pager
git_config
git_etc_gitconfig
system_path
Therefore, we introduce git_set_argv0_path() and call it as soon as
possible.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mv/merge-in-c:
reduce_heads(): protect from duplicate input
reduce_heads(): thinkofix
Add a new test for git-merge-resolve
t6021: add a new test for git-merge-resolve
Teach merge.log to "git-merge" again
Build in merge
Fix t7601-merge-pull-config.sh on AIX
git-commit-tree: make it usable from other builtins
Add new test case to ensure git-merge prepends the custom merge message
Add new test case to ensure git-merge reduces octopus parents when possible
Introduce reduce_heads()
Introduce get_merge_bases_many()
Add new test to ensure git-merge handles more than 25 refs.
Introduce get_octopus_merge_bases() in commit.c
git-fmt-merge-msg: make it usable from other builtins
Move read_cache_unmerged() to read-cache.c
Add new test to ensure git-merge handles pull.twohead and pull.octopus
Move parse-options's skip_prefix() to git-compat-util.h
Move commit_list_count() to commit.c
Move split_cmdline() to alias.c
Conflicts:
Makefile
parse-options.c
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is great debate over whether some commands should set
up a pager automatically. This patch allows individuals to
set their own pager preferences for each command, overriding
the default. For example, to disable the pager for git
status:
git config pager.status false
If "--pager" or "--no-pager" is specified on the command
line, it takes precedence over the config option.
There are two caveats:
- you can turn on the pager for plumbing commands.
Combined with "core.pager = always", this will probably
break a lot of things. Don't do it.
- This only works for builtin commands. The reason is
somewhat complex:
Calling git_config before we do setup_git_directory
has bad side effects, because it wants to know where
the git_dir is to find ".git/config". Unfortunately,
we cannot call setup_git_directory indiscriminately,
because some builtins (like "init") break if we do.
For builtins, this is OK, since we can just wait until
after we call setup_git_directory. But for aliases, we
don't know until we expand (recursively) which command
we're doing. This should not be a huge problem for
aliases, which can simply use "--pager" or "--no-pager"
in the alias as appropriate.
For external commands, however, we don't know we even
have an external command until we exec it, and by then
it is too late to check the config.
An alternative approach would be to have a config mode
where we don't bother looking at .git/config, but only
at the user and system config files. This would make the
behavior consistent across builtins, aliases, and
external commands, at the cost of not allowing per-repo
pager config for at all.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* j6t/mingw: (38 commits)
compat/pread.c: Add a forward declaration to fix a warning
Windows: Fix ntohl() related warnings about printf formatting
Windows: TMP and TEMP environment variables specify a temporary directory.
Windows: Make 'git help -a' work.
Windows: Work around an oddity when a pipe with no reader is written to.
Windows: Make the pager work.
When installing, be prepared that template_dir may be relative.
Windows: Use a relative default template_dir and ETC_GITCONFIG
Windows: Compute the fallback for exec_path from the program invocation.
Turn builtin_exec_path into a function.
Windows: Use a customized struct stat that also has the st_blocks member.
Windows: Add a custom implementation for utime().
Windows: Add a new lstat and fstat implementation based on Win32 API.
Windows: Implement a custom spawnve().
Windows: Implement wrappers for gethostbyname(), socket(), and connect().
Windows: Work around incompatible sort and find.
Windows: Implement asynchronous functions as threads.
Windows: Disambiguate DOS style paths from SSH URLs.
Windows: A rudimentary poll() emulation.
Windows: Implement start_command().
...
split_cmdline() is currently used for aliases only, but later it can be
useful for other builtins as well. Move it to alias.c for now,
indicating that originally it's for aliases, but we'll have it in libgit
this way.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, execv_git_cmd() always try running the dashed form, which
means we cannot easily remove the git-foo hardlinks for built-in
commands. This updates the function to always exec "git foo" form, and
makes sure "git" potty does not infinitely recurse to itself.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before we can successfully parse a builtin command from the program name
we must strip off unneeded parts, that is, the file extension.
Furthermore, we must take Windows style path names into account when we
parse the program name.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Attributes can be specified at three different places: the internal
table of default values, the file $GIT_DIR/info/attributes and files
named .gitattributes in the work tree. Since bare repositories don't
have a work tree, git should ignore any .gitattributes files there.
This patch makes git do that, so the only way left for a user to specify
attributes in a bare repository is the file info/attributes (in addition
to changing the defaults and recompiling).
In addition, git-check-attr is now allowed to run without a work tree.
Like any user of the code in attr.c, it ignores the .gitattributes files
when run in a bare repository. It can still read from info/attributes.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's main usage pages did not show "git help" as a way to get more
information on a specific subcommand. This patch adds an info line after
the list of git commands currently printed by "git", "git help", "git
--help" and "git help --all".
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/diff-no-no-index:
git diff --no-index: default to page like other diff frontends
git-diff: allow --no-index semantics a bit more
"git diff": do not ignore index without --no-index
diff-files: do not play --no-index games
tests: do not use implicit "git diff --no-index"
Being able to say "git diff A B" outside a git repository and getting a
colourful version of "diff -u A B" may be nice, but such a cute hack
should not give bogus results to scripts that want to give two paths,
either or both of which happen to have been removed from the work tree,
to "git diff-files".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to Johannes Schindelin for various comments and improvements,
including supporting cloning full bundles.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
make git status act similar to git log and git diff by presenting long
output in a pager.
Signed-off-by: Bart Trojanowski <bart@jukie.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
af05d67 (Always set *nongit_ok in setup_git_directory_gently(),
2008-03-25) had a change from the patch originally submitted that resulted
in disabling aliases outside a git repository.
It turns out that some people used "alias.fubar = diff --color-words" in
$HOME/.gitconfig to use non-index diff (or any command that do not need
git repository) outside git repositories, and this change broke them,
so this resurrects the support for such usage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_git_directory_gently() only modified the value of its *nongit_ok
argument if we were not in a git repository. Now it will always set it
to 0 when we are inside a repository.
Also remove now unnecessary initializations in the callers of this
function.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time shortlog could be run from a non-git directory
and still do its job. Fix this regression and add a small test
for it.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/checkout: (21 commits)
checkout: error out when index is unmerged even with -m
checkout: show progress when checkout takes long time while switching branches
Add merge-subtree back
checkout: updates to tracking report
builtin-checkout.c: Remove unused prefix arguments in switch_branches path
checkout: work from a subdirectory
checkout: tone down the "forked status" diagnostic messages
Clean up reporting differences on branch switch
builtin-checkout.c: fix possible usage segfault
checkout: notice when the switched branch is behind or forked
Build in checkout
Move code to clean up after a branch change to branch.c
Library function to check for unmerged index entries
Use diff -u instead of diff in t7201
Move create_branch into a library file
Build-in merge-recursive
Add "skip_unmerged" option to unpack_trees.
Discard "deleted" cache entries after using them to update the working tree
Send unpack-trees debugging output to stderr
Add flag to make unpack_trees() not print errors.
...
Conflicts:
Makefile
This converts git_config_alias to the public alias_lookup
function. Because of the nature of our config parser, we
still have to rely on setting static data. However, that
interface is wrapped so that you can just say
value = alias_lookup(key);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit e1b3a2c (Build-in merge-recursive) made the
subtree merge strategy backend unavailable. This resurrects
it.
A new test t6029 currently only tests the strategy is available,
but it should be enhanced to check the real "subtree" case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only differences in behavior should be:
- git checkout -m with non-trivial merging won't print out
merge-recursive messages (see the change in t7201-co.sh)
- git checkout -- paths... will give a sensible error message if
HEAD is invalid as a commit.
- some intermediate states which were written to disk in the shell
version (in particular, index states) are only kept in memory in
this version, and therefore these can no longer be revealed by
later write operations becoming impossible.
- when we change branches, we discard MERGE_MSG, SQUASH_MSG, and
rr-cache/MERGE_RR, like reset always has.
I'm not 100% sure I got the merge recursive setup exactly right; the
base for a non-trivial merge in the shell code doesn't seem
theoretically justified to me, but I tried to match it anyway, and the
tests all pass this way.
Other than these items, the results should be identical to the shell
version, so far as I can tell.
[jc: squashed lock-file fix from Dscho in]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes write_tree_from_memory(), which writes the active cache as
a tree and returns the struct tree for it, available to other code. It
also makes available merge_trees(), which does the internal merge of
two trees with a known base, and merge_recursive(), which does the
recursive internal merge of two commits with a list of common
ancestors.
The first two of these will be used by checkout -m, and the third is
presumably useful in general, although the implementation of checkout
-m which entirely matches the behavior of the shell version does not
use it (since it ignores the difference of ancestry between the old
branch and the new branch).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
* kh/commit: (33 commits)
git-commit --allow-empty
git-commit: Allow to amend a merge commit that does not change the tree
quote_path: fix collapsing of relative paths
Make git status usage say git status instead of git commit
Fix --signoff in builtin-commit differently.
git-commit: clean up die messages
Do not generate full commit log message if it is not going to be used
Remove git-status from list of scripts as it is builtin
Fix off-by-one error when truncating the diff out of the commit message.
builtin-commit.c: export GIT_INDEX_FILE for launch_editor as well.
Add a few more tests for git-commit
builtin-commit: Include the diff in the commit message when verbose.
builtin-commit: fix partial-commit support
Fix add_files_to_cache() to take pathspec, not user specified list of files
Export three helper functions from ls-files
builtin-commit: run commit-msg hook with correct message file
builtin-commit: do not color status output shown in the message template
file_exists(): dangling symlinks do exist
Replace "runstatus" with "status" in the tests
t7501-commit: Add test for git commit <file> with dirty index.
...
Now that str_buf takes care of all the allocations, there is
no more gain to pass an argument count.
So this patch removes the "count" argument from:
- "sq_quote_argv"
- "trace_argv_printf"
and all the callers.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This program dumps (parts of) a git repository in the format that
fast-import understands.
For clarity's sake, it does not use the 'inline' method of specifying
blobs in the commits, but builds the blobs before building the commits.
Since signed tags' signatures will not necessarily be valid (think
transformations after the export, or excluding revisions, changing
the history), there are 4 modes to handle them: abort (default),
ignore, warn and strip. The latter just turns the tags into
unsigned ones.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/send-pack: (24 commits)
send-pack: cluster ref status reporting
send-pack: fix "everything up-to-date" message
send-pack: tighten remote error reporting
make "find_ref_by_name" a public function
Fix warning about bitfield in struct ref
send-pack: assign remote errors to each ref
send-pack: check ref->status before updating tracking refs
send-pack: track errors for each ref
git-push: add documentation for the newly added --mirror mode
Add tests for git push'es mirror mode
Update the tracking references only if they were succesfully updated on remote
Add a test checking if send-pack updated local tracking branches correctly
git-push: plumb in --mirror mode
Teach send-pack a mirror mode
send-pack: segfault fix on forced push
Reteach builtin-ls-remote to understand remotes
send-pack: require --verbose to show update of tracking refs
receive-pack: don't mention successful updates
more terse push output
Build in ls-remote
...
* js/mingw-fallouts:
fetch-pack: Prepare for a side-band demultiplexer in a thread.
rehabilitate some t5302 tests on 32-bit off_t machines
Allow ETC_GITCONFIG to be a relative path.
Introduce git_etc_gitconfig() that encapsulates access of ETC_GITCONFIG.
Allow a relative builtin template directory.
Close files opened by lock_file() before unlinking.
builtin run_command: do not exit with -1.
Move #include <sys/select.h> and <sys/ioctl.h> to git-compat-util.h.
Use is_absolute_path() in sha1_file.c.
Skip t3902-quoted.sh if the file system does not support funny names.
t5302-pack-index: Skip tests of 64-bit offsets if necessary.
t7501-commit.sh: Not all seds understand option -i
t5300-pack-object.sh: Split the big verify-pack test into smaller parts.
This makes git commit a builtin and moves git-commit.sh to
contrib/examples. This also removes the git-runstatus
helper, which was mostly just a git-status.sh implementation detail.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Except that this fixes a longstanding corner case bug by
tightening the way underlying diff-index command is run, it is
functionally equivalent to the scripted version.
Signed-off-by: Thomas Harning Jr <harningt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces git-clean.sh with builtin-clean.c, and moves
git-clean.sh to the examples.
This also introduces a change in behavior when removing directories
explicitly specified as a path. For example currently:
1. When dir has only untracked files, these two behave differently:
$ git clean -n dir
$ git clean -n dir/
the former says "Would not remove dir/", while the latter would say
"Would remove dir/untracked" for all paths under it, but not the
directory itself.
With -d, the former would stop refusing, however since the user
explicitly asked to remove the directory the -d is no longer required.
2. When there are more parameters:
$ git clean -n dir foo
$ git clean -n dir/ foo
both cases refuse to remove dir/ unless -d is specified. Once again
since both cases requested to remove dir the -d is no longer required.
Thanks to Johannes Schindelin for the conversion to using the
parse-options API.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/parseopt-sh:
git-quiltimport.sh fix --patches handling
git-am: -i does not take a string parameter.
sh-setup: don't let eval output to be shell-expanded.
git-sh-setup: fix parseopt `eval` string underquoting
Give git-am back the ability to add Signed-off-by lines.
git-rev-parse --parseopt
scripts: Add placeholders for OPTIONS_SPEC
Migrate git-repack.sh to use git-rev-parse --parseopt
Migrate git-quiltimport.sh to use git-rev-parse --parseopt
Migrate git-checkout.sh to use git-rev-parse --parseopt --keep-dashdash
Migrate git-instaweb.sh to use git-rev-parse --parseopt
Migrate git-merge.sh to use git-rev-parse --parseopt
Migrate git-am.sh to use git-rev-parse --parseopt
Migrate git-clone to use git-rev-parse --parseopt
Migrate git-clean.sh to use git-rev-parse --parseopt.
Update git-sh-setup(1) to allow transparent use of git-rev-parse --parseopt
Add a parseopt mode to git-rev-parse to bring parse-options to shell scripts.
There are shells that do not correctly detect an exit code of -1 as a
failure. We simply truncate the status code to the lower 8 bits.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/remote-builtin:
Reteach builtin-ls-remote to understand remotes
Build in ls-remote
Use built-in send-pack.
Build-in send-pack, with an API for other programs to call.
Build-in peek-remote, using transport infrastructure.
Miscellaneous const changes and utilities
Conflicts:
transport.c
The "parseopt mode" of git-rev-parse does not need to be run
inside a git repository, although the normal mode does.
Most notabily, lack of this fix breaks git-clone script, as
noticed by Nico.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to do git rm --cached -r directory, instead of
git ls-files -z directory | git update-index --remove -z --stdin.
This can be particularly useful for git-filter-branch users.
Signed-off-by: Mike Hommey <mh@glandium.org>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a setup_work_tree() that can be used from any command requiring
a working tree conditionally.
Signed-off-by: Mike Hommey <mh@glandium.org>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This actually replaces peek-remote with ls-remote, since peek-remote
now handles everything. peek-remote remains an a second name for
ls-remote, although its help message now gives the "ls-remote" name.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also marks some more things as const, as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to correctly set up $PATH for non-c based git commands.
Since we already do this, we can just use that $PATH and execvp,
instead of looping over the paths with execve.
This patch adds a setup_path() function to exec_cmd.c, which sets
the $PATH order correctly for our search order. execv_git_cmd() is
stripped down to setting up argv and calling execvp(). git.c's
main() only only needs to call setup_path().
Signed-off-by: Scott R Parish <srp@srparish.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
There is already logic in the git wrapper to deduce the exec_path from
argv[0], when the git wrapper was called with an absolute path. Extend
that logic to handle relative paths as well.
For example, when you call "../../hello/world/git", it will not turn
"../../hello/world" into an absolute path, and use that.
Initial implementation by Scott R Parish.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
* sq_quote_buf is made public, and works on a strbuf.
* sq_quote_argv also works on a strbuf.
* make sq_quote_argv take a "maxlen" argument to check the buffer won't grow
too big.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to Johannes Schindelin for review and fixes, and Julian
Phillips for the original C translation.
This changes a few small bits of behavior:
branch.<name>.merge is parsed as if it were the lhs of a fetch
refspec, and does not have to exactly match the actual lhs of a
refspec, so long as it is a valid abbreviation for the same ref.
branch.<name>.merge is no longer ignored if the remote is configured
with a branches/* file. Neither behavior is useful, because there can
only be one ref that gets fetched, but this is more consistant.
Also, fetch prints different information to standard out.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This turns the extern functions to be provided by the backend into a
struct of pointers, renames the functions to be more
namespace-friendly, and updates http-fetch to this interface. It
removes the unused include from http-push.c. It makes git-http-fetch a
builtin (with the implementation a separate file, accessible
directly).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces the script "git-reset.sh" with "builtin-reset.c".
A few git commands used in the script are called from the builtin also:
"ls-files" to check for unmerged files, "read-tree" for resetting
the index file in "mixed" and "hard" resets, and "update-index" to
refresh at the end in the "mixed" reset and also for the option that
gets selected paths into the index.
The reset option with paths was implemented by Johannes Schindelin.
Since the option that gets selected paths into the index is not
a "reset" like the others because it does not change the HEAD at all,
now the command is showing a warning when the "--mixed" option
is supplied for that purpose.
The following table shows the behaviour of "git reset" for
the different supported options, where X means "changing"
the HEAD, index or working tree:
reset: --soft --mixed --hard -- <paths>
HEAD X X X -
index - X X X
files - - X -
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"GIT_DIR=some.where git --bare cmd" and worse yet
"git --git-dir=some.where --bare cmd" were very confusing. They
both ignored git-dir specified, and instead made $cwd as GIT_DIR.
This changes --bare not to override existing GIT_DIR.
This has been like this for a long time. Let's hope nobody sane
relied on this insane behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here is my attempt to fix this with a minimally intrusive patch.
* As "git --bare init" cannot tell if it was called with --bare or
just "GIT_DIR=. git init", I added an explicit assignment of
is_bare_repository_cfg on the codepath for "git --bare".
* GIT_WORK_TREE alone without GIT_DIR does not make any sense,
nor GIT_WORK_TREE with an explicit "git --bare". Catch that
mistake. It might make sense to move this check to "git.c"
side as well, but I tried to shoot for the minimum change for
now.
* Some scripts, especially from the olden days, rely on
traditional GIT_DIR behaviour in "git init". Namely, these
are some notable patterns:
(create a bare repository)
- mkdir some.git && cd some.git && GIT_DIR=. git init
- mkdir some.git && cd some.git && git --bare init
(create a non-bare repository)
- mkdir .git && GIT_DIR=.git git init
- mkdir .git && GIT_DIR=`pwd`/.git git init
This comes with a new test script and also passes the existing
test suite, but there may be cases that are still broken with
the current tip of master and this patch does not yet fix. I'd
appreciate help in straightening this mess out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To keep the change small, this is done by setting GIT_PAGER to "cat".
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Wincent Colaiuta found out, it's a bit unexpected for git diff to
start a pager even when the --quiet option is specified. The problem
is that the pager hides the return code -- which is the only output
we're interested in in this case.
Push pager setup down into builtin-diff.c and don't start the pager
if --exit-code or --quiet (which implies --exit-code) was specified.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
The old version of work-tree support was an unholy mess, barely readable,
and not to the point.
For example, why do you have to provide a worktree, when it is not used?
As in "git status". Now it works.
Another riddle was: if you can have work trees inside the git dir, why
are some programs complaining that they need a work tree?
IOW it is allowed to call
$ git --git-dir=../ --work-tree=. bla
when you really want to. In this case, you are both in the git directory
and in the working tree. So, programs have to actually test for the right
thing, namely if they are inside a working tree, and not if they are
inside a git directory.
Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was
specified, unless there is a repository in the current working directory.
It does now.
The logic to determine if a repository is bare, or has a work tree
(tertium non datur), is this:
--work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true,
which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR
ends in /.git, which overrides the directory in which .git/ was found.
In related news, a long standing bug was fixed: when in .git/bla/x.git/,
which is a bare repository, git formerly assumed ../.. to be the
appropriate git dir. This problem was reported by Shawn Pearce to have
caused much pain, where a colleague mistakenly ran "git init" in "/" a
long time ago, and bare repositories just would not work.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces "git-verify-tag.sh" with "builtin-verify-tag.c".
Testing relies on the "git tag -v" tests calling this command.
A temporary file is needed when calling to gpg, because git is
already creating detached signatures (gpg option -b) to sign tags
(instead of leaving gpg to add the signature to the file by itself),
and those signatures need to be supplied in a separate file to be
verified by gpg.
The program uses git_mkstemp to create that temporary file needed by
gpg, instead of the previously used "$GIT_DIR/.tmp-vtag", in order to
allow the command to be used in read-only repositories, and also
prevent other instances of git to read or remove the same file.
Signal SIGPIPE is ignored because the program sometimes was
terminated because that signal when writing the input for gpg.
The command now can receive many tag names to be verified.
Documentation is also updated here to reflect this new behaviour.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces the script "git-tag.sh" with "builtin-tag.c".
The existing test suite for "git tag" guarantees the compatibility
with the features provided by the script version.
There are some minor changes in the behaviour of "git tag" here:
"git tag -v" now can get more than one tag to verify, like "git tag -d" does,
"git tag" with no arguments prints all tags, more like "git branch" does,
and "git tag -n" also prints all tags with annotations (without needing -l).
Tests and documentation were also updated to reflect these changes.
The program is currently calling the script "git verify-tag" for verify.
This can be changed porting it to C and calling its functions directly
from builtin-tag.c.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-blame (and friends) specifically leave the pager turned off
in the case that --incremental is specified as this isn't for
human consumption. git-pickaxe and git-annotate will turn it on
themselves otherwise.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an alias starts with an exclamation mark, the rest is interpreted
as a shell command. However, all arguments passed to git used to be
ignored.
Now you can have an alias like
$ git config alias.e '!echo'
and
$ git e Hello World
does what you expect it to do.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ei/worktree+filter:
filter-branch: always export GIT_DIR if it is set
setup_git_directory: fix segfault if repository is found in cwd
test GIT_WORK_TREE
extend rev-parse test for --is-inside-work-tree
Use new semantics of is_bare/inside_git_dir/inside_work_tree
introduce GIT_WORK_TREE to specify the work tree
test git rev-parse
rev-parse: introduce --is-bare-repository
rev-parse: document --is-inside-git-dir
This switches the checks around upon the exit codepath of the
git wrapper, so that we may recover at least non-transient errors.
It's still not perfect. As I've been harping on, stdio simply isn't very
good for error reporting. For example, if an IO error happened, you'd want
to see EIO, wouldn't you? And yes, that's what the kernel would return.
However, with buffered stdio (and flushing outside of our control), what
would likely happen is that some intermediate error return _does_ return
EIO, but then the kernel might decide to re-mount the filesystem read-only
due to the error, and the actual *report* for us might be
"write failure on standard output: read-only filesystem"
which lost the EIO.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is trying to implement the strict IO error checks that Jim Meyering
suggested, but explicitly limits it to just regular files. If a pipe gets
closed on us, we shouldn't complain about it.
If the subcommand already returned an error, that takes precedence (and we
assume that the subcommand already printed out any relevant messages
relating to it)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should change no code at all, it just moves the definition of "struct
cmd_struct" out, and then splits out the running of the right command into
the "run_command()" function.
It also removes the long-unused 'envp' pointer passing.
This is just preparation for adding some more error checking.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliases changing environment variables (GIT_DIR or
GIT_WORK_TREE) can cause problems:
git has to use GIT_DIR to read the aliases from the config.
After running handle_options for the alias the options of the
alias may have changed environment variables. Depending on
the implementation of setenv the memory location obtained
through getenv earlier may contain the old value or the new
value (or even be used for something else?). To avoid these
problems git errors out if an alias uses any option which
changes environment variables.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up to now to check for a working tree this was used:
!is_bare && !inside_git_dir
(the check for bare is redundant because is_inside_git_dir
returned already 1 for bare repositories).
Now the check is:
inside_work_tree && !inside_git_dir
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_gdg is used as abbreviation for setup_git_directory_gently.
The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option). Additionally
there is a command line option --work-tree which sets the
environment variable.
setup_gdg does the following now:
GIT_DIR unspecified
repository in .git directory
parent directory of the .git directory is used as work tree,
GIT_WORK_TREE is ignored
GIT_DIR unspecified
repository in cwd
GIT_DIR is set to cwd
see the cases with GIT_DIR specified what happens next and
also see the note below
GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
cwd is used as work tree
GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
the specified work tree is used
Note on the case where GIT_DIR is unspecified and repository is in cwd:
GIT_WORK_TREE is used but is_inside_git_dir is always true.
I did it this way because setup_gdg might be called multiple
times (e.g. when doing alias expansion) and in successive calls
setup_gdg should do the same thing every time.
Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:
(1) is_bare_repository
A repository is bare if core.bare is true or core.bare is
unspecified and the name suggests it is bare (directory not
named .git). The bare option disables a few protective
checks which are useful with a working tree. Currently
this changes if a repository is bare:
updates of HEAD are allowed
git gc packs the refs
the reflog is disabled by default
(2) is_inside_work_tree
True if the cwd is inside the associated working tree (if there
is one), false otherwise.
(3) is_inside_git_dir
True if the cwd is inside the git directory, false otherwise.
Before this patch is_inside_git_dir was always true for bare
repositories.
When setup_gdg finds a repository git_config(git_default_config) is
always called. This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.
inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository. The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.5.1:
annotate: make it work from subdirectories.
git-config: Correct asciidoc documentation for --int/--bool
t1300: Add tests for git-config --bool --get
unpack-trees.c: verify_uptodate: remove dead code
Use PATH_MAX instead of TEMPFILE_PATH_LEN
branch: fix segfault when resolving an invalid HEAD
This adds the basic infrastructure to assign attributes to
paths, in a way similar to what the exclusion mechanism does
based on $GIT_DIR/info/exclude and .gitignore files.
An attribute is just a simple string that does not contain any
whitespace. They can be specified in $GIT_DIR/info/attributes
file, and .gitattributes file in each directory.
Each line in these files defines a pattern matching rule.
Similar to the exclusion mechanism, a later match overrides an
earlier match in the same file, and entries from .gitattributes
file in the same directory takes precedence over the ones from
parent directories. Lines in $GIT_DIR/info/attributes file are
used as the lowest precedence default rules.
A line is either a comment (an empty line, or a line that begins
with a '#'), or a rule, which is a whitespace separated list of
tokens. The first token on the line is a shell glob pattern.
The rest are names of attributes, each of which can optionally
be prefixed with '!'. Such a line means "if a path matches this
glob, this attribute is set (or unset -- if the attribute name
is prefixed with '!'). For glob matching, the same "if the
pattern does not have a slash in it, the basename of the path is
matched with fnmatch(3) against the pattern, otherwise, the path
is matched with the pattern with FNM_PATHNAME" rule as the
exclusion mechanism is used.
This does not define what an attribute means. Tying an
attribute to various effects it has on git operation for paths
that have it will be specified separately.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano
Jonathan Nieder
Nguyễn Thái Ngọc Duy
Johannes Schindelin
Alex Riesen
Frank Li
Pete Harlan
Johan Herland
Linus Torvalds
Avery Pennarun
Christian Couder
Matthieu Moy
René Scharfe
Johannes Sixt
Brandon Casey
Thomas Rast
Felipe Contreras
Mike Ralphson
Markus Heidelberg
Jeff King
Steffen Prohaska
Steve Haslam
Alexander Potashev
Adeodato Simó
Scott Chacon
Brandon Casey
Shawn O. Pearce
Deskin Miller
Dotan Barak
Johannes Sixt
Miklos Vajna
Teemu Likonen
Daniel Barkalow
Bart Trojanowski
SZEDER Gábor
Jonas Fonseca
Kristian Høgsberg
Thomas Harning
Shawn Bohrer
Mike Hommey
Scott R Parish
Pierre Habouzit
Carlos Rica
Andrew Ruder
Matthias Lederhofer
Junio C Hamano