gitdiff_verify_name() only did a filename prefix check because of an
off-by-one error.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
find_name() wrongly returned the whole filename for filenames without
enough leading pathname components (e.g., when applying a patch to a
top-level file with -p2).
Include the -p value used in the error message when no filenames can be
found.
[jc: squashed a test from Nanako Shiraishi]
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/sparse: (25 commits)
t7002: test for not using external grep on skip-worktree paths
t7002: set test prerequisite "external-grep" if supported
grep: do not do external grep on skip-worktree entries
commit: correctly respect skip-worktree bit
ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
tests: rename duplicate t1009
sparse checkout: inhibit empty worktree
Add tests for sparse checkout
read-tree: add --no-sparse-checkout to disable sparse checkout support
unpack-trees(): ignore worktree check outside checkout area
unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
unpack-trees.c: generalize verify_* functions
unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
Introduce "sparse checkout"
dir.c: export excluded_1() and add_excludes_from_file_1()
excluded_1(): support exclude files in index
unpack-trees(): carry skip-worktree bit over in merged_entry()
Read .gitignore from index if it is skip-worktree
Avoid writing to buffer in add_excludes_from_file_1()
...
Conflicts:
.gitignore
Documentation/config.txt
Documentation/git-update-index.txt
Makefile
entry.c
t/t7002-grep.sh
Previously CE_MATCH_IGNORE_VALID flag is used by both valid and
skip-worktree bits. While the two bits have similar behaviour, sharing
this flag means "git update-index --really-refresh" will ignore
skip-worktree while it should not. Instead another flag is
introduced to ignore skip-worktree bit, CE_MATCH_IGNORE_VALID only
applies to valid bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch structure has def_name component that is used to validate the
sanity of a "diff --git" patch by checking pathnames that appear on the
patch header lines for consistency. The git_header_name() function is
used to compute this out of "diff --git a/... b/..." line, but the code
always stripped one level of prefix (i.e. "a/" and "b/"), without paying
attention to -p<n> option. Code in find_name() function that parses other
lines in the patch header (e.g. "--- a/..." and "+++ b/..." lines) however
did strip the correct number of leading paths prefixes, and the sanity
check between these computed values failed.
Teach git_header_name() to honor -p<n> option like find_name() function
does.
Found and reported by Steven J. Murdoch who also wrote tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-blank-at-eof:
diff -B: colour whitespace errors
diff.c: emit_add_line() takes only the rest of the line
diff.c: split emit_line() from the first char and the rest of the line
diff.c: shuffling code around
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
* 'jc/maint-1.6.0-blank-at-eof' (early part):
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
The whitespace error of adding blank lines at the end of file should
trigger if you added a non-empty line at the end, if the contents of the
line is full of whitespaces.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" strips new blank lines at EOF under --whitespace=fix option,
but neigher --whitespace=warn nor --whitespace=error paid any attention to
these errors.
Introduce a new whitespace error class, blank-at-eof, to make the
whitespace error handling more consistent.
The patch adds a new "linenr" field to the struct fragment in order to
record which line the hunk started in the input file, but this is needed
solely for reporting purposes. The detection of this class of whitespace
errors cannot be done while parsing a patch like we do for all the other
classes of whitespace errors. It instead has to wait until we find where
to apply the hunk, but at that point, we do not have an access to the
original line number in the input file anymore, hence the new field.
Depending on your point of view, this may be a bugfix that makes warn and
error in line with fix. Or you could call it a new feature. The line
between them is somewhat fuzzy in this case.
Strictly speaking, triggering more errors than before is a change in
behaviour that is not backward compatible, even though the reason for the
change is because the code was not checking for an error that it should
have. People who do not want added blank lines at EOF to trigger an error
can disable the new error class.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This splits the logic to record the presence of whitespace errors out of
the check_whitespace() function, which checks and then records. The new
function, record_ws_error(), can be used by the blank-at-eof check that
does not use ws_check() logic to report its findings in the same output
format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command tries to strip blank lines at the end of the file added by a
patch. It is done by first detecting if a hunk in patch has additional
blank lines at the end of itself, and if so checking if such a hunk
applies at the end of file. This patch addresses a bug in the logic to
implement the former (the previous one addressed a bug in the latter).
If the original ends with blank lines, often the patch hunk ends like
this:
@@ -l,5 +m,7 @@$
_context$
_context$
-deleted$
+$
+$
+$
_$
_$
where _ stands for SP and $ shows a end-of-line. This example patch adds
three trailing blank lines, but the code fails to notice it, because it
only pays attention to added blank lines at the very end of the hunk. In
this example, the three added blank lines do not appear textually at the
end in the patch, even though you can see that they are indeed added at
the end, if you rearrange the diff like this:
@@ -l,5 +m,7 @@$
_context$
_context$
-deleted$
_$
_$
+$
+$
+$
The fix is not to reset the number of (candidate) added blank lines at the
end when the loop sees a context line that is empty.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b94f2ed (builtin-apply.c: make it more line oriented, 2008-01-26) broke
the logic used to detect if a hunk adds blank lines at the end of the
file. With the new code after that commit:
- img holds the contents of the file that the hunk is being applied to;
- preimage has the lines the hunk expects to be in img; and
- postimage has the lines the hunk wants to update the part in img that
corresponds to preimage with.
and we need to compare if the last line of preimage (not postimage)
matches the last line of img to see if the hunk applies at the end of the
file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of allocating a temporary array imglen[], copying contents to it
from another array img->line[], and then using imglen[], use the value
from img->line[], whose value does not change during the whole process.
This incidentally removes a use of C99 variable length array, which some
older compilers apparently are not happy with.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --ignore-whitespace option and corresponding config bool to
ignore whitespace differences while applying patches, akin to the
'patch' program.
'git am', 'git rebase' and the bash git completion are made aware of
this option.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unified context patch generated by GNU diff has UNIX epoch timestamp
on the side that does not exist when the patch is about a creation or
a deletion event. Notice this convention when reading a non-git diff.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/die_errno:
Use die_errno() instead of die() when checking syscalls
Convert existing die(..., strerror(errno)) to die_errno()
die_errno(): double % in strerror() output just in case
Introduce die_errno() that appends strerror(errno) to die()
Lots of die() calls did not actually report the kind of error, which
can leave the user confused as to the real problem. Use die_errno()
where we check a system/library call that sets errno on failure, or
one of the following that wrap such calls:
Function Passes on error from
-------- --------------------
odb_pack_keep open
read_ancestry fopen
read_in_full xread
strbuf_read xread
strbuf_read_file open or strbuf_read_file
strbuf_readlink readlink
write_in_full xwrite
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few remaining ones, but this fixes the trivial ones. It boils
down to two main issues that sparse complains about:
- warning: Using plain integer as NULL pointer
Sparse doesn't like you using '0' instead of 'NULL'. For various good
reasons, not the least of which is just the visual confusion. A NULL
pointer is not an integer, and that whole "0 works as NULL" is a
historical accident and not very pretty.
A few of these remain: zlib is a total mess, and Z_NULL is just a 0.
I didn't touch those.
- warning: symbol 'xyz' was not declared. Should it be static?
Sparse wants to see declarations for any functions you export. A lack
of a declaration tends to mean that you should either add one, or you
should mark the function 'static' to show that it's in file scope.
A few of these remain: I only did the ones that should obviously just
be made static.
That 'wt_status_submodule_summary' one is debatable. It has a few related
flags (like 'wt_status_use_color') which _are_ declared, and are used by
builtin-commit.c. So maybe we'd like to export it at some point, but it's
not declared now, and not used outside of that file, so 'static' it is in
this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the argh printing by simply calling usage_argh() if the option
can take an argument. Update macros defined in parse-options.h to set
the PARSE_OPT_NOARG flag.
The only other user of custom non-argument taking options is git-apply
(in this case OPTION_BOOLEAN for deprecated options). Update it to set
the PARSE_OPT_NOARG flag.
Thanks to Ren辿 Scharfe for the suggestion and starter patch.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Reviewd-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dbd0f5c (Files given on the command line are relative to $cwd,
2008-08-06) introduced parse_options_fix_filename() as a minimal fix.
OPT_FILENAME is intended to be a more robust fix for the same issue.
OPT_FILENAME and its associated enum OPTION_FILENAME are used to
represent filename options within the parse options API.
This option is similar to OPTION_STRING. If --no is prefixed to the
option the filename is unset. If no argument is given and the default
value is set, the filename is set to the default value. The difference
is that the filename is prefixed with the prefix passed to
parse_options() (or parse_options_start()).
Update git-apply, git-commit, git-fmt-merge-msg, and git-tag to use
OPT_FILENAME with their filename options. Also, rename
parse_options_fix_filename() to fix_filename() as it is no longer
extern.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To give OPT_FILENAME the prefix, we pass the prefix to parse_options()
which passes the prefix to parse_options_start() which sets the prefix
member of parse_opts_ctx accordingly. If there isn't a prefix in the
calling context, passing NULL will suffice.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* master: (654 commits)
http-push.c::remove_locks(): fix use after free
t/t3400-rebase.sh: add more tests to help migrating git-rebase.sh to C
post-receive-email: hooks.showrev: show how to include both web link and patch
MinGW: Fix compiler warning in merge-recursive
MinGW: Add a simple getpass()
MinGW: use POSIX signature of waitpid()
MinGW: the path separator to split GITPERLLIB is ';' on Win32
MinGW: Scan for \r in addition to \n when reading shbang lines
gitweb: Sanitize title attribute in format_subject_html
Terminate argv with NULL before calling setup_revisions()
doc/git-rebase.txt: remove mention of multiple strategies
git-send-email: Handle quotes when parsing .mailrc files
git-svn: add --authors-prog option
git-svn: Set svn.authorsfile if it is passed to git svn clone
git-svn: Correctly report max revision when following deleted paths
git-svn: Fix for svn paths removed > log-window-size revisions ago
git-svn testsuite: use standard configuration for Subversion tools
grep: fix word-regexp colouring
completion: use git rev-parse to detect bare repos
Cope better with a _lot_ of packs
...
When there are duplicated slashes in pathnames, like this:
--- a/perl//Git.pm
+++ b/perl//Git.pm
@@ -1358,3 +1358,4 @@
1; # Famous last words
+# test
the paths gleaned from the patch header won't be found in the index and
cause "apply --index" and "apply --cached" to fail.
Fix this by squashing the duplicated slashes upon input.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dbd0f5c7 (Files given on the command line are relative to $cwd,
2008-08-06) only fixed git-commit and git-tag. But, git-apply and
git-fmt-merge-msg didn't get the update and exhibit the same behavior.
Fix them and add tests for "apply --build-fake-ancestor" and
"fmt-merge-msg -F".
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps to notice when something's going wrong, especially on
systems which lock open files.
I used the following criteria when selecting the code for replacement:
- it was already printing a warning for the unlink failures
- it is in a function which already printing something or is
called from such a function
- it is in a static function, returning void and the function is only
called from a builtin main function (cmd_)
- it is in a function which handles emergency exit (signal handlers)
- it is in a function which is obvously cleaning up the lockfiles
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Example correct diff generated by `diff -M -B' might look like this:
diff --git a/file1 b/file2
similarity index 100%
rename from file1
rename to file2
diff --git a/file2 b/file1
similarity index 100%
rename from file2
rename to file1
Information about removing `file2' comes after information about creation
of new `file2' (renamed from `file1'). Existing implementation isn't able to
apply such patch, because it has to know in advance which files will be
removed.
This patch populates fn_table with information about removal of files
before calling check_patch() for each patch to be applied.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Example correct diff generated by `diff -M -B' might look like this:
diff --git a/file1 b/file2
similarity index 100%
rename from file1
rename to file2
diff --git a/file2 b/file1
similarity index 100%
rename from file2
rename to file1
Information about removing `file2' comes after information about creation
of new `file2' (renamed from `file1'). Existing implementation isn't able to
apply such patch, because it has to know in advance which files will be
removed.
This patch populates fn_table with information about removal of files
before calling check_patch() for each patch to be applied.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options "--binary" and "--allow-binary-replacement" of
git-apply are no-op and maintained for backward compatibility,
so avoid to show them in the short help screen.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Swap function argument pair (length, string) into (string, length) to
conform with the commonly used order inside the GIT source code.
Also, add a note about this fact into the coding guidelines.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
User-manual: "git stash <comment>" form is long gone
add test-dump-cache-tree in Makefile
fix typo in Documentation
apply: fix access to an uninitialized mode variable, found by valgrind
Conflicts:
Makefile
* maint-1.6.0:
User-manual: "git stash <comment>" form is long gone
add test-dump-cache-tree in Makefile
fix typo in Documentation
apply: fix access to an uninitialized mode variable, found by valgrind
When 'tpatch' was initialized successfully, st_mode was already taken
from the previous diff. We should not try to override it with data
from an lstat() that was never called.
This is a companion patch to 7a07841(git-apply: handle a patch that
touches the same path more than once better).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
R. Tyler Ballance reported a mysterious transient repository corruption;
after much digging, it turns out that we were not catching and reporting
memory allocation errors from some calls we make to zlib.
This one _just_ wraps things; it doesn't do the "retry on low memory
error" part, at least not yet. It is an independent issue from the
reporting. Some of the errors are expected and passed back to the caller,
but we die when zlib reports it failed to allocate memory for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous "parse-opt"ification broke git-apply reading from the
standard input. "git apply A - C <B" is supposed to read patches from
files A, B and C in this order.
Before "parse-opt"ification, we used be able to:
git apply --stat - --apply <A B
to read the patch from file A, showing only the diffstat, and then read the
patch from file B, showing the diffstat and actually applying it. Even
with this fix we cannot do that anymore, but that is so crazy use case I
do not think anybody sane relied on such a broken behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Andreas Gruenbacher
Nguyễn Thái Ngọc Duy
Giuseppe Bilotta
Thomas Rast
Linus Torvalds
Stephen Boyd
Michal Marek
Alex Riesen
Michał Kiedrowicz
Ulrich Windl
Miklos Vajna
Michele Ballabio
Kjetil Barvik
Johannes Schindelin