Non-layered commit-graphs use 'adjust_shared_perm' to make the
commit-graph file readable (or not) to a combination of the user, group,
and others.
Call 'adjust_shared_perm' for split-graph layers to make sure that these
also respect 'core.sharedRepository'. The 'commit-graph-chain' file
already respects this configuration since it uses
'hold_lock_file_for_update' (which calls 'adjust_shared_perm' eventually
in 'create_tempfile_mode').
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, Git learned 'hold_lock_file_for_update_mode' to
allow the caller to specify the permission bits (prior to further
adjustment by the umask and shared repository permissions) used when
acquiring a temporary file.
Use this in the commit-graph machinery for writing a non-split graph to
acquire an opened temporary file with permissions read-only permissions
to match the split behavior. (In the split case, Git uses
git_mkstemp_mode' for each of the commit-graph layers with permission
bits '0444').
One can notice this discrepancy when moving a non-split graph to be part
of a new chain. This causes a commit-graph chain where all layers have
read-only permission bits, except for the base layer, which is writable
for the current user.
Resolve this discrepancy by using the new
'hold_lock_file_for_update_mode' and passing the desired permission
bits.
Doing so causes some test fallout in t5318 and t6600. In t5318, this
occurs in tests that corrupt a commit-graph file by writing into it. For
these, 'chmod u+w'-ing the file beforehand resolves the issue. The
additional spot in 'corrupt_graph_verify' is necessary because of the
extra 'git commit-graph write' beforehand (which *does* rewrite the
commit-graph file). In t6600, this is caused by copying a read-only
commit-graph file into place and then trying to replace it. For these,
make these files writable.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit-graph write --expire-time=<timestamp>" did not use the
given timestamp correctly, which has been corrected.
* ds/commit-graph-expiry-fix:
commit-graph: fix buggy --expire-time option
We don't ever refer to the descriptor after mmap-ing it. And keeping it
open means we can run out of descriptors in degenerate cases (e.g.,
thousands of split chain files). Let's close it as soon as possible.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a layered commit-graph, the commit-graph machinery uses
'commit_graph_filenames_after' and 'commit_graph_hash_after' to keep
track of the layers in the chain that we are in the process of writing.
When the number of commit-graph layers shrinks, we initialize all
entries in the aforementioned arrays, because we know the structure of
the new commit-graph chain immediately (since there are no new layers,
there are no unknown hash values).
But when the number of commit-graph layers grows (i.e., that
'num_commit_graphs_after > num_commit_graphs_before'), then we leave
some entries in the filenames and hashes arrays as uninitialized,
because we will fill them in later as those values become available.
For instance, we rely on 'write_commit_graph_file's to store the
filename and hash of the last layer in the new chain, which is the one
that it is responsible for writing. But, it's possible that
'write_commit_graph_file' may fail, e.g., from file descriptor
exhaustion. In this case it is possible that 'git_mkstemp_mode' will
fail, and that function will return early *before* setting the values
for the last commit-graph layer's filename and hash.
This causes a number of upleasant side-effects. For instance, trying to
'free()' each entry in 'ctx->commit_graph_filenames_after' (and
similarly for the hashes array) causes us to 'free()' uninitialized
memory, since the area is allocated with 'malloc()' and is therefore
subject to contain garbage (which is left alone when
'write_commit_graph_file' returns early).
This can manifest in other issues, like a general protection fault,
and/or leaving a stray 'commit-graph-chain.lock' around after the
process dies. (The reasoning for this is still a mystery to me, since
we'd otherwise usually expect the kernel to run tempfile.c's 'atexit()'
handlers in the case of a normal death...)
To resolve this, initialize the memory with 'CALLOC_ARRAY' so that
uninitialized entries are filled with zeros, and can thus be 'free()'d
as a noop instead of causing a fault.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a commit-graph layer, we do so in a temporary file which is
renamed into place. If we fail to create a temporary file, for e.g.,
because we have too many open files, then 'git_mkstemp_mode' sets the
pattern to the empty string, in which case we get an error something
along the lines of:
error: unable to create ''
It's not useful to show the pattern here at all, since we (1) know the
pattern is well-formed, and (2) would have already shown the dirname
when trying to create the leading directories. So, replace this error
with something friendlier.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_TEST_COMMIT_GRAPH environment variable updates the commit-
graph file whenever "git commit" is run, ensuring that we always
have an updated commit-graph throughout the test suite. The
GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS environment variable was
introduced to write the changed-path Bloom filters whenever "git
commit-graph write" is run. However, the GIT_TEST_COMMIT_GRAPH
trick doesn't launch a separate process and instead writes it
directly.
To expand the number of tests that have commits in the commit-graph
file, add a helper method that computes the commit-graph and place
that helper inside "git commit" and "git merge".
In the helper method, check GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS
to ensure we are writing changed-path Bloom filters whenever
possible.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When operating on a stream of commit OIDs on stdin, 'git commit-graph
write' checks that each OID refers to an object that is indeed a commit.
This is convenient to make sure that the given input is well-formed, but
can sometimes be undesirable.
For example, server operators may wish to feed the refnames that were
updated during a push to 'git commit-graph write --input=stdin-commits',
and silently discard refs that don't point at commits. This can be done
by combing the output of 'git for-each-ref' with '--format
%(*objecttype)', but this requires opening up a potentially large number
of objects. Instead, it is more convenient to feed the updated refs to
the commit-graph machinery, and let it throw out refs that don't point
to commits.
Introduce '--[no-]check-oids' to make such a behavior possible. With
'--check-oids' (the default behavior to retain backwards compatibility),
'git commit-graph write' will barf on a non-commit line in its input.
With 'no-check-oids', such lines will be silently ignored, making the
above possible by specifying this option.
No matter which is supplied, 'git commit-graph write' retains the
behavior from the previous commit of rejecting non-OID inputs like
"HEAD" and "refs/heads/foo" as before.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'write_commit_graph()' function takes in either a string list of
pack indices, or a string list of hexadecimal commit OIDs. These
correspond to the '--stdin-packs' and '--stdin-commits' mode(s) from
'git commit-graph write'.
Using a string_list of hexadecimal commit IDs is not the most efficient
use of memory, since we can instead use the 'struct oidset', which is
more well-suited for this case.
This has another benefit which will become apparent in the following
commit. This is that we are about to disambiguate the kinds of errors we
produce with '--stdin-commits' into "non-hex input" and "hex-input, but
referring to a non-commit object". By having 'write_commit_graph' take
in a 'struct oidset *' of commits, we place the burden on the caller (in
this case, the builtin) to handle the first case, and the commit-graph
machinery can handle the second case.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we laid the groundwork for supporting different
splitting strategies. In this commit, we introduce the first splitting
strategy: 'no-merge'.
Passing '--split=no-merge' is useful for callers which wish to write a
new incremental commit-graph, but do not want to spend effort condensing
the incremental chain [1]. Previously, this was possible by passing
'--size-multiple=0', but this no longer the case following 63020f175f
(commit-graph: prefer default size_mult when given zero, 2020-01-02).
When '--split=no-merge' is given, the commit-graph machinery will never
condense an existing chain, and it will always write a new incremental.
[1]: This might occur when, for example, a server administrator running
some program after each push may want to ensure that each job runs
proportional in time to the size of the push, and does not "jump" when
the commit-graph machinery decides to trigger a merge.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add logic to
a) parse Bloom filter information from the commit graph file and,
b) re-use existing Bloom filters.
See Documentation/technical/commit-graph-format for the format in which
the Bloom filter information is written to the commit graph file.
To read Bloom filter for a given commit with lexicographic position
'i' we need to:
1. Read BIDX[i] which essentially gives us the starting index in BDAT for
filter of commit i+1. It is essentially the index past the end
of the filter of commit i. It is called end_index in the code.
2. For i>0, read BIDX[i-1] which will give us the starting index in BDAT
for filter of commit i. It is called the start_index in the code.
For the first commit, where i = 0, Bloom filter data starts at the
beginning, just past the header in the BDAT chunk. Hence, start_index
will be 0.
3. The length of the filter will be end_index - start_index, because
BIDX[i] gives the cumulative 8-byte words including the ith
commit's filter.
We toggle whether Bloom filters should be recomputed based on the
compute_if_not_present flag.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the technical documentation for commit-graph-format with
the formats for the Bloom filter index (BIDX) and Bloom filter
data (BDAT) chunks. Write the computed Bloom filters information
to the commit graph file using this format.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph builtin has an --expire-time option that takes a
datetime using OPT_EXPIRY_DATE(). However, the implementation inside
expire_commit_graphs() was treating a non-zero value as a number of
seconds to subtract from "now".
Update t5323-split-commit-graph.sh to demonstrate the correct value
of the --expire-time option by actually creating a crud .graph file
with mtime earlier than the expire time. Instead of using a super-
early time (1980) we use an explicit, and recent, time. Using
test-tool chmtime to create two files on either end of an exact
second, we create a test that catches this failure no matter the
current time. Using a fixed date is more portable than trying to
format a relative date string into the --expiry-date input.
I noticed this when inspecting some Scalar repos that had an excess
number of commit-graph files. In Scalar, we were using this second
interpretation by using "--expire-time=3600" to mean "delete graphs
older than one hour ago" to avoid deleting a commit-graph that a
foreground process may be trying to load.
Also I noticed that the help text was copied from the --max-commits
option. Fix that help text.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git commit-graph write --changed-paths', we sort the
commits by pack-order to save time when computing the changed-paths
bloom filters. This does not help when finding the commits via the
'--reachable' flag.
If not using pack-order, then sort by generation number before
examining the diff. Commits with similar generation are more likely
to have many trees in common, making the diff faster.
On the Linux kernel repository, this change reduced the computation
time for 'git commit-graph write --reachable --changed-paths' from
3m00s to 1m37s.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Looking at the diff of commit objects in pack order is much faster than
in sha1 order, as it gives locality to the access of tree deltas
(whereas sha1 order is effectively random). Unfortunately the
commit-graph code sorts the commits (several times, sometimes as an oid
and sometimes a pointer-to-commit), and we ultimately traverse in sha1
order.
Instead, let's remember the position at which we see each commit, and
traverse in that order when looking at bloom filters. This drops my time
for "git commit-graph write --changed-paths" in linux.git from ~4
minutes to ~1.5 minutes.
Probably the "--reachable" code path would want something similar.
Or alternatively, we could use a different data structure (either a
hash, or maybe even just a bit in "struct commit") to keep track of
which oids we've seen, etc instead of sorting. And then we could keep
the original order.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new COMMIT_GRAPH_WRITE_CHANGED_PATHS flag that makes Git compute
Bloom filters for the paths that changed between a commit and it's
first parent, for each commit in the commit-graph. This computation
is done on a commit-by-commit basis.
We will write these Bloom filters to the commit-graph file, to store
this data on disk, in the next change in this series.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a minor cleanup to make it easier to change
the number of chunks being written to the commit
graph.
Reviewed-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge_commit_graphs() copies the (translated) progress message into a
strbuf and passes the copy to start_delayed_progress() at each loop
iteration. The latter function takes a string pointer, so let's avoid
the detour and hand the string to it directly. That's shorter, simpler
and slightly more efficient.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a similar treatment as in the previous patch to pass a 'struct
object_directory *' through the 'load_commit_graph_one_fd_st'
initializer, too.
This prevents a potential bug where a pointer comparison is made to a
NULL 'g->odb', which would cause the commit-graph machinery to think
that a pair of commit-graphs belonged to different alternates when in
fact they do not (i.e., in the case of no '--object-dir').
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a previous patch, the 'char *object_dir' in 'struct commit_graph' was
replaced with a 'struct object_directory'. This patch applies the same
treatment to 'struct commit_graph', which is another intermediate step
towards getting rid of all path normalization in 'commit-graph.c'.
Instead of taking a 'char *object_dir', functions that construct a
'struct commit_graph' now take a 'struct object_directory *'. Any code
that needs an object directory path use '->path' instead.
This ensures that all calls to functions that perform path normalization
are given arguments which do not themselves require normalization. This
prepares those functions to drop their normalization entirely, which
will occur in the subsequent patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are lots of places in 'commit-graph.h' where a function either has
(or almost has) a full 'struct object_directory *', accesses '->path',
and then throws away the rest of the struct.
This can cause headaches when comparing the locations of object
directories across alternates (e.g., in the case of deciding if two
commit-graph layers can be merged). These paths are normalized with
'normalize_path_copy()' which mitigates some comparison issues, but not
all [1].
Replace usage of 'char *object_dir' with 'odb->path' by storing a
'struct object_directory *' in the 'write_commit_graph_context'
structure. This is an intermediate step towards getting rid of all path
normalization in 'commit-graph.c'.
Resolving a user-provided '--object-dir' argument now requires that we
compare it to the known alternates for equality. Prior to this patch,
an unknown '--object-dir' argument would silently exit with status zero.
This can clearly lead to unintended behavior, such as verifying
commit-graphs that aren't in a repository's own object store (or one of
its alternates), or causing a typo to mask a legitimate commit-graph
verification failure. Make this error non-silent by 'die()'-ing when the
given '--object-dir' does not match any known alternate object store.
[1]: In my testing, for example, I can get one side of the commit-graph
code to fill object_dir with "./objects" and the other with just
"objects".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to write split commit-graph file(s) upon fetching computed
bogus value for the parameter used in splitting the resulting
files, which has been corrected.
* ds/commit-graph-set-size-mult:
commit-graph: prefer default size_mult when given zero
In 50f26bd ("fetch: add fetch.writeCommitGraph config setting",
2019-09-02), the fetch builtin added the capability to write a
commit-graph using the "--split" feature. This feature creates
multiple commit-graph files, and those can merge based on a set
of "split options" including a size multiple. The default size
multiple is 2, which intends to provide a log_2 N depth of the
commit-graph chain where N is the number of commits.
However, I noticed during dogfooding that my commit-graph chains
were becoming quite large when left only to builds by 'git fetch'.
It turns out that in split_graph_merge_strategy(), we default the
size_mult variable to 2 except we override it with the context's
split_opts if they exist. In builtin/fetch.c, we create such a
split_opts, but do not populate it with values.
This problem is due to two failures:
1. It is unclear that we can add the flag COMMIT_GRAPH_WRITE_SPLIT
with a NULL split_opts.
2. If we have a non-NULL split_opts, then we override the default
values even if a zero value is given.
Correct both of these issues. First, do not override size_mult when
the options provide a zero value. Second, stop creating a split_opts
in the fetch builtin.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One kind of progress messages were always given during commit-graph
generation, instead of following the "if it takes more than two
seconds, show progress" pattern, which has been corrected.
* ds/commit-graph-delay-gen-progress:
commit-graph: use start_delayed_progress()
progress: create GIT_PROGRESS_DELAY
Docfix.
* en/doc-typofix:
Fix spelling errors in no-longer-updated-from-upstream modules
multimail: fix a few simple spelling errors
sha1dc: fix trivial comment spelling error
Fix spelling errors in test commands
Fix spelling errors in messages shown to users
Fix spelling errors in names of tests
Fix spelling errors in comments of testcases
Fix spelling errors in code comments
Fix spelling errors in documentation outside of Documentation/
Documentation: fix a bunch of typos, both old and new
Crufty code and logic accumulated over time around the object
parsing and low-level object access used in "git fsck" have been
cleaned up.
* jk/cleanup-object-parsing-and-fsck: (23 commits)
fsck: accept an oid instead of a "struct tree" for fsck_tree()
fsck: accept an oid instead of a "struct commit" for fsck_commit()
fsck: accept an oid instead of a "struct tag" for fsck_tag()
fsck: rename vague "oid" local variables
fsck: don't require an object struct in verify_headers()
fsck: don't require an object struct for fsck_ident()
fsck: drop blob struct from fsck_finish()
fsck: accept an oid instead of a "struct blob" for fsck_blob()
fsck: don't require an object struct for report()
fsck: only require an oid for skiplist functions
fsck: only provide oid/type in fsck_error callback
fsck: don't require object structs for display functions
fsck: use oids rather than objects for object_name API
fsck_describe_object(): build on our get_object_name() primitive
fsck: unify object-name code
fsck: require an actual buffer for non-blobs
fsck: stop checking tag->tagged
fsck: stop checking commit->parent counts
fsck: stop checking commit->tree value
commit, tag: don't set parsed bit for parse failures
...
When writing a commit-graph, we show progress along several commit
walks. When we use start_delayed_progress(), the progress line will
only appear if that step takes a decent amount of time.
However, one place was missed: computing generation numbers. This is
normally a very fast operation as all commits have been parsed in a
previous step. But, this is showing up for all users no matter how few
commits are being added.
The tests that check for the progress output have already been updated
to use GIT_PROGRESS_DELAY=0 to force the expected output.
Helped-by: Jeff King <peff@peff.net>
Reported-by: ryenus <ryenus@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we can't parse a commit, then parse_commit() will return an error
code. But it _also_ sets the "parsed" flag, which tells us not to bother
trying to re-parse the object. That means that subsequent parses have no
idea that the information in the struct may be bogus. I.e., doing this:
parse_commit(commit);
...
if (parse_commit(commit) < 0)
die("commit is broken");
will never trigger the die(). The second parse_commit() will see the
"parsed" flag and quietly return success.
There are two obvious ways to fix this:
1. Stop setting "parsed" until we've successfully parsed.
2. Keep a second "corrupt" flag to indicate that we saw an error (and
when the parsed flag is set, return 0/-1 depending on the corrupt
flag).
This patch does option 1. The obvious downside versus option 2 is that
we might continually re-parse a broken object. But in practice,
corruption like this is rare, and we typically die() or return an error
in the caller. So it's OK not to worry about optimizing for corruption.
And it's much simpler: we don't need to use an extra bit in the object
struct, and callers which check the "parsed" flag don't need to learn
about the corrupt bit, too.
There's no new test here, because this case is already covered in t5318.
Note that we do need to update the expected message there, because we
now detect the problem in the return from "parse_commit()", and not with
a separate check for a NULL tree. In fact, we can now ditch that
explicit tree check entirely, as we're covered robustly by this change
(and the previous recent change to treat a NULL tree as a parse error).
We'll also give tags the same treatment. I don't know offhand of any
cases where the problem can be triggered (it implies somebody ignoring a
parse error earlier in the process), but consistently returning an error
should cause the least surprise.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit includes a failing test for an issue around
fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we
fix that bug and set the test to "test_expect_success".
The problem arises with this set of commands when the remote repo at
<url> has a submodule. Note that --recurse-submodules is not needed to
demonstrate the bug.
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
As an initial fix, I converted the code in builtin/fetch.c that calls
write_commit_graph_reachable() to instead launch a "git commit-graph
write --reachable --split" process. That code worked, but is not how we
want the feature to work long-term.
That test did demonstrate that the issue must be something to do with
internal state of the 'git fetch' process.
The write_commit_graph() method in commit-graph.c ensures the commits we
plan to write are "closed under reachability" using close_reachable().
This method walks from the input commits, and uses the UNINTERESTING
flag to mark which commits have already been visited. This allows the
walk to take O(N) time, where N is the number of commits, instead of
O(P) time, where P is the number of paths. (The number of paths can be
exponential in the number of commits.)
However, the UNINTERESTING flag is used in lots of places in the
codebase. This flag usually means some barrier to stop a commit walk,
such as in revision-walking to compare histories. It is not often
cleared after the walk completes because the starting points of those
walks do not have the UNINTERESTING flag, and clear_commit_marks() would
stop immediately.
This is happening during a 'git fetch' call with a remote. The fetch
negotiation is comparing the remote refs with the local refs and marking
some commits as UNINTERESTING.
I tested running clear_commit_marks_many() to clear the UNINTERESTING
flag inside close_reachable(), but the tips did not have the flag, so
that did nothing.
It turns out that the calculate_changed_submodule_paths() method is at
fault. Thanks, Peff, for pointing out this detail! More specifically,
for each submodule, the collect_changed_submodules() runs a revision
walk to essentially do file-history on the list of submodules. That
revision walk marks commits UNININTERESTING if they are simplified away
by not changing the submodule.
Instead, I finally arrived on the conclusion that I should use a flag
that is not used in any other part of the code. In commit-reach.c, a
number of flags were defined for commit walk algorithms. The REACHABLE
flag seemed like it made the most sense, and it seems it was not
actually used in the file. The REACHABLE flag was used in early versions
of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make
can_all_from_reach... linear, 2018-07-20).
Add the REACHABLE flag to commit-graph.c and use it instead of
UNINTERESTING in close_reachable(). This fixes the bug in manual
testing.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miscellaneous code clean-ups.
* ah/cleanups:
git_mkstemps_mode(): replace magic numbers with computed value
wrapper: use a loop instead of repetitive statements
diffcore-break: use a goto instead of a redundant if statement
commit-graph: remove a duplicate assignment
The code to parse and use the commit-graph file has been made more
robust against corrupted input.
* tb/commit-graph-harden:
commit-graph.c: handle corrupt/missing trees
commit-graph.c: handle commit parsing errors
t/t5318: introduce failing 'git commit-graph write' tests
The "upload-pack" (the counterpart of "git fetch") needs to disable
commit-graph when responding to a shallow clone/fetch request, but
the way this was done made Git panic, which has been corrected.
* jk/disable-commit-graph-during-upload-pack:
upload-pack: disable commit graph more gently for shallow traversal
commit-graph: bump DIE_ON_LOAD check to actual load-time
A pair of small fixups to "git commit-graph" have been applied.
* jk/commit-graph-cleanup:
commit-graph: turn off save_commit_buffer
commit-graph: don't show progress percentages while expanding reachable commits
Leave the variable 'g' uninitialized before it is set just before its
first use in front of a loop, which is a much more appropriate place to
indicate what it is used for.
Also initialize the variable 'num_commits' just before the loop instead
of at the beginning of the function for the same reason.
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --[no-]progress to git commit-graph write and verify.
The progress feature was introduced in 7b0f229
("commit-graph write: add progress output", 2018-09-17) but
the ability to opt-out was overlooked.
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let commit_list_count() count the number of parents instead of
duplicating it. Also store the result in an unsigned int, as that's
what the function returns, and the count is never negative.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the client has asked for certain shallow options like
"deepen-since", we do a custom rev-list walk that pretends to be
shallow. Before doing so, we have to disable the commit-graph, since it
is not compatible with the shallow view of the repository. That's
handled by 829a321569 (commit-graph: close_commit_graph before shallow
walk, 2018-08-20). That commit literally closes and frees our
repo->objects->commit_graph struct.
That creates an interesting problem for commits that have _already_ been
parsed using the commit graph. Their commit->object.parsed flag is set,
their commit->graph_pos is set, but their commit->maybe_tree may still
be NULL. When somebody later calls repo_get_commit_tree(), we see that
we haven't loaded the tree oid yet and try to get it from the commit
graph. But since it has been freed, we segfault!
So the root of the issue is a data dependency between the commit's
lazy-load of the tree oid and the fact that the commit graph can go
away mid-process. How can we resolve it?
There are a couple of general approaches:
1. The obvious answer is to avoid loading the tree from the graph when
we see that it's NULL. But then what do we return for the tree oid?
If we return NULL, our caller in do_traverse() will rightly
complain that we have no tree. We'd have to fallback to loading the
actual commit object and re-parsing it. That requires teaching
parse_commit_buffer() to understand re-parsing (i.e., not starting
from a clean slate and not leaking any allocated bits like parent
list pointers).
2. When we close the commit graph, walk through the set of in-memory
objects and clear any graph_pos pointers. But this means we also
have to "unparse" any such commits so that we know they still need
to open the commit object to fill in their trees. So it's no less
complicated than (1), and is more expensive (since we clear objects
we might not later need).
3. Stop freeing the commit-graph struct. Continue to let it be used
for lazy-loads of tree oids, but let upload-pack specify that it
shouldn't be used for further commit parsing.
4. Push the whole shallow rev-list out to its own sub-process, with
the commit-graph disabled from the start, giving it a clean memory
space to work from.
I've chosen (3) here. Options (1) and (2) would work, but are
non-trivial to implement. Option (4) is more expensive, and I'm not sure
how complicated it is (shelling out for the actual rev-list part is
easy, but we do then parse the resulting commits internally, and I'm not
clear which parts need to be handling shallow-ness).
The new test in t5500 triggers this segfault, but see the comments there
for how horribly intimate it has to be with how both upload-pack and
commit graphs work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 43d3561805 (commit-graph write: don't die if the existing graph
is corrupt, 2019-03-25) added an environment variable we use only in the
test suite, $GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD. But it put the check for
this variable at the very top of prepare_commit_graph(), which is called
every time we want to use the commit graph. Most importantly, it comes
_before_ we check the fast-path "did we already try to load?", meaning
we end up calling getenv() for every single use of the commit graph,
rather than just when we load.
getenv() is allowed to have unexpected side effects, but that shouldn't
be a problem here; we're lazy-loading the graph so it's clear that at
least _one_ invocation of this function is going to call it.
But it is inefficient. getenv() typically has to do a linear search
through the environment space.
We could memoize the call, but it's simpler still to just bump the check
down to the actual loading step. That's fine for our sole user in t5318,
and produces this minor real-world speedup:
[before]
Benchmark #1: git -C linux rev-list HEAD >/dev/null
Time (mean ± σ): 1.460 s ± 0.017 s [User: 1.174 s, System: 0.285 s]
Range (min … max): 1.440 s … 1.491 s 10 runs
[after]
Benchmark #1: git -C linux rev-list HEAD >/dev/null
Time (mean ± σ): 1.391 s ± 0.005 s [User: 1.118 s, System: 0.273 s]
Range (min … max): 1.385 s … 1.399 s 10 runs
Of course that actual speedup depends on how big your environment is. We
can game it like this:
for i in $(seq 10000); do
export dummy$i=$i
done
in which case I get:
[before]
Benchmark #1: git -C linux rev-list HEAD >/dev/null
Time (mean ± σ): 6.257 s ± 0.061 s [User: 6.005 s, System: 0.250 s]
Range (min … max): 6.174 s … 6.337 s 10 runs
[after]
Benchmark #1: git -C linux rev-list HEAD >/dev/null
Time (mean ± σ): 1.403 s ± 0.005 s [User: 1.146 s, System: 0.256 s]
Range (min … max): 1.396 s … 1.412 s 10 runs
So this is really more about avoiding the pathological case than
providing a big real-world speedup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A mechanism to affect the default setting for a (related) group of
configuration variables is introduced.
* ds/feature-macros:
repo-settings: create feature.experimental setting
repo-settings: create feature.manyFiles setting
repo-settings: parse core.untrackedCache
commit-graph: turn on commit-graph by default
t6501: use 'git gc' in quiet mode
repo-settings: consolidate some config settings
Commit 49bbc57a57 (commit-graph write: emit a percentage for all
progress, 2019-01-19) was a bit overeager when it added progress
percentages to the "Expanding reachable commits in commit graph" phase
as well, because most of the time the number of commits that phase has
to iterate over is not known in advance and grows significantly, and,
consequently, we end up with nonsensical numbers:
$ git commit-graph write --reachable
Expanding reachable commits in commit graph: 138606% (824706/595), done.
[...]
$ git rev-parse v5.0 | git commit-graph write --stdin-commits
Expanding reachable commits in commit graph: 81264400% (812644/1), done.
[...]
Even worse, because the percentage grows so quickly, the progress code
outputs much more often than it should (because it ticks every second,
or every 1%), slowing the whole process down. My time for "git
commit-graph write --reachable" on linux.git went from 13.463s to
12.521s with this patch, ~7% savings.
Therefore, don't show progress percentages in the "Expanding reachable
commits in commit graph" phase.
Note that the current code does sometimes do the right thing, if we
picked up all commits initially (e.g., omitting "--reachable" in a
fully-packed repository would get the correct count without any parent
traversal). So it may be possible to come up with a way to tell when we
could use a percentage here. But in the meantime, let's make sure we
robustly avoid printing nonsense.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply similar treatment as in the previous commit to handle an unchecked
call to 'get_commit_tree_oid()'. Previously, a NULL return value from
this function would be immediately dereferenced with '->hash', and then
cause a segfault.
Before dereferencing to access the 'hash' member, check the return value
of 'get_commit_tree_oid()' to make sure that it is not NULL.
To make this check correct, a related change is also needed in
'commit.c', which is to check the return value of 'get_commit_tree'
before taking its address. If 'get_commit_tree' returns NULL, we
encounter an undefined behavior when taking the address of the return
value of 'get_commit_tree' and then taking '->object.oid'. (On my system,
this is memory address 0x8, which is obviously wrong).
Fix this by making sure that 'get_commit_tree' returns something
non-NULL before digging through a structure that is not there, thus
preventing a segfault down the line in the commit graph code.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To write a commit graph chunk, 'write_graph_chunk_data()' takes a list
of commits to write and parses each one before writing the necessary
data, and continuing on to the next commit in the list.
Since the majority of these commits are not parsed ahead of time (an
exception is made for the *last* commit in the list, which is parsed
early within 'copy_oids_to_commits'), it is possible that calling
'parse_commit_no_graph()' on them may return an error. Failing to catch
these errors before de-referencing later calls can result in a undefined
memory access and a SIGSEGV.
One such example of this is 'get_commit_tree_oid()', which expects a
parsed object as its input (in this case, the commit-graph code passes
'*list'). If '*list' causes a parse error, the subsequent call will
fail.
Prevent such an issue by checking the return value of
'parse_commit_no_graph()' to avoid passing an unparsed object to a
function which expects a parsed object, thus preventing a segfault.
It is worth noting that this fix is really skirting around the issue in
object.c's 'parse_object()', which makes it difficult to tell how
corrupt an object is without digging into it. Presumably one could
change the meaning of 'parse_object' returns, but this would require
adjusting each callsite accordingly. Instead of that, add an additional
check to the object parsed.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to write commit-graph over given commit object names has
been made a bit more robust.
* sg/commit-graph-validate:
commit-graph: error out on invalid commit oids in 'write --stdin-commits'
commit-graph: turn a group of write-related macro flags into an enum
t5318-commit-graph: use 'test_expect_code'
There are a few important config settings that are not loaded
during git_default_config. These are instead loaded on-demand.
Centralize these config options to a single scan, and store
all of the values in a repo_settings struct. The values for
each setting are initialized as negative to indicate "unset".
This centralization will be particularly important in a later
change to introduce "meta" config settings that change the
defaults for these config settings.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 1771be90 "commit-graph: merge commit-graph chains" (2019-06-18),
the method sort_and_scan_merged_commits() was added to merge the
commit lists of two commit-graph files in the incremental format.
Unfortunately, there was an off-by-one error in that method around
incrementing num_extra_edges, which leads to an incorrect offset
for the base graph chunk.
When we store an octopus merge in the commit-graph file, we store
the first parent in the normal place, but use the second parent
position to point into the "extra edges" chunk where the remaining
parents exist. This means we should be adding "num_parents - 1"
edges to this list, not "num_parents - 2". That is the basic error.
The reason this was not caught in the test suite is more subtle.
In 5324-split-commit-graph.sh, we test creating an octopus merge
and adding it to the tip of a commit-graph chain, then verify the
result. This _should_ have caught the problem, except that when
we load the commit-graph files we were overly careful to not fail
when the commit-graph chain does not match. This care was on
purpose to avoid race conditions as one process reads the chain
and another process modifies it. In such a case, the reading
process outputs the following message to stderr:
warning: commit-graph chain does not match
These warnings are output in the test suite, but ignored. By
checking the stderr of `git commit-graph verify` to include
the expected progress output, it will now catch this error.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While 'git commit-graph write --stdin-commits' expects commit object
ids as input, it accepts and silently skips over any invalid commit
object ids, and still exits with success:
# nonsense
$ echo not-a-commit-oid | git commit-graph write --stdin-commits
$ echo $?
0
# sometimes I forgot that refs are not good...
$ echo HEAD | git commit-graph write --stdin-commits
$ echo $?
0
# valid tree OID, but not a commit OID
$ git rev-parse HEAD^{tree} | git commit-graph write --stdin-commits
$ echo $?
0
$ ls -l .git/objects/info/commit-graph
ls: cannot access '.git/objects/info/commit-graph': No such file or directory
Check that all input records are indeed valid commit object ids and
return with error otherwise, the same way '--stdin-packs' handles
invalid input; see e103f7276f (commit-graph: return with errors during
write, 2019-06-12).
Note that it should only return with error when encountering an
invalid commit object id coming from standard input. However,
'--reachable' uses the same code path to process object ids pointed to
by all refs, and that includes tag object ids as well, which should
still be skipped over. Therefore add a new flag to 'enum
commit_graph_write_flags' and a corresponding field to 'struct
write_commit_graph_context', so we can differentiate between those two
cases.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commits in a repository can be described by multiple
commit-graph files now, which allows the commit-graph files to be
updated incrementally.
* ds/commit-graph-incremental:
commit-graph: test verify across alternates
commit-graph: normalize commit-graph filenames
commit-graph: test --split across alternate without --split
commit-graph: test octopus merges with --split
commit-graph: clean up chains after flattened write
commit-graph: verify chains with --shallow mode
commit-graph: create options for split files
commit-graph: expire commit-graph files
commit-graph: allow cross-alternate chains
commit-graph: merge commit-graph chains
commit-graph: add --split option to builtin
commit-graph: write commit-graph chains
commit-graph: rearrange chunk count logic
commit-graph: add base graphs chunk
commit-graph: load commit-graph chains
commit-graph: rename commit_compare to oid_compare
commit-graph: prepare for commit-graph chains
commit-graph: document commit-graph chains
Code clean-up to remove hardcoded SHA-1 hash from many places.
* jk/oidhash:
hashmap: convert sha1hash() to oidhash()
hash.h: move object_id definition from cache.h
khash: rename oid helper functions
khash: drop sha1-specific map types
pack-bitmap: convert khash_sha1 maps into kh_oid_map
delta-islands: convert island_marks khash to use oids
khash: rename kh_oid_t to kh_oid_set
khash: drop broken oid_map typedef
object: convert create_object() to use object_id
object: convert internal hash_obj() to object_id
object: convert lookup_object() to use object_id
object: convert lookup_unknown_object() to use object_id
pack-objects: convert locate_object_entry_hash() to object_id
pack-objects: convert packlist_find() to use object_id
pack-bitmap-write: convert some helpers to use object_id
upload-pack: rename a "sha1" variable to "oid"
describe: fix accidental oid/hash type-punning
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
There are no callers left of create_object() that aren't just passing us
the "hash" member of a "struct object_id". Let's take the whole struct,
which gets us closer to removing all raw sha1 variables.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing commit-graph files, we append path data to an
object directory, which may be specified by the user via the
'--object-dir' option. If the user supplies a trailing slash,
or some other alternative path format, the resulting path may
be usable for writing to the correct location. However, when
expiring graph files from the <obj-dir>/info/commit-graphs
directory during a write, we need to compare paths with exact
string matches.
Normalize the commit-graph filenames to avoid ambiguity. This
creates extra allocations, but this is a constant multiple of
the number of commit-graph files, which should be a number in
the single digits.
Further normalize the object directory in the context. Due to
a comparison between g->obj_dir and ctx->obj_dir in
split_graph_merge_strategy(), a trailing slash would prevent
any merging of layers within the same object directory. The
check is there to ensure we do not merge across alternates.
Update the tests to include a case with this trailing slash
problem.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "--split" option to the 'git commit-graph write' subcommand. This
option allows the optional behavior of writing a commit-graph chain.
The current behavior will add a tip commit-graph containing any commits that
are not in the existing commit-graph or commit-graph chain. Later changes
will allow merging the chain and expiring out-dated files.
Add a new test script (t5324-split-commit-graph.sh) that demonstrates this
behavior.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend write_commit_graph() to write a commit-graph chain when given the
COMMIT_GRAPH_SPLIT flag.
This implementation is purposefully simplistic in how it creates a new
chain. The commits not already in the chain are added to a new tip
commit-graph file.
Much of the logic around writing a graph-{hash}.graph file and updating
the commit-graph-chain file is the same as the commit-graph file case.
However, there are several places where we need to do some extra logic
in the split case.
Track the list of graph filenames before and after the planned write.
This will be more important when we start merging graph files, but it
also allows us to upgrade our commit-graph file to the appropriate
graph-{hash}.graph file when we upgrade to a chain of commit-graphs.
Note that we use the eighth byte of the commit-graph header to store the
number of base graph files. This determines the length of the base
graphs chunk.
A subtle change of behavior with the new logic is that we do not write a
commit-graph if we our commit list is empty. This extends to the typical
case, which is reflected in t5318-commit-graph.sh.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we write a commit-graph file without the split option, then
we write to $OBJDIR/info/commit-graph and start to ignore
the chains in $OBJDIR/info/commit-graphs/.
Unlink the commit-graph-chain file and expire the graph-{hash}.graph
files in $OBJDIR/info/commit-graphs/ during every write.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The number of chunks in a commit-graph file can change depending on
whether we need the Extra Edges Chunk. We are going to add more optional
chunks, and it will be helpful to rearrange this logic around the chunk
count before doing so.
Specifically, we need to finalize the number of chunks before writing
the commit-graph header. Further, we also need to fill out the chunk
lookup table dynamically and using "num_chunks" as we add optional
chunks is useful for adding optional chunks in the future.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we wrote a commit-graph chain, we only modified the tip file in
the chain. It is valuable to verify what we wrote, but not waste
time checking files we did not write.
Add a '--shallow' option to the 'git commit-graph verify' subcommand
and check that it does not read the base graph in a two-file chain.
Making the verify subcommand read from a chain of commit-graphs takes
some rearranging of the builtin code.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To quickly verify a commit-graph chain is valid on load, we will
read from the new "Base Graphs Chunk" of each file in the chain.
This will prevent accidentally loading incorrect data from manually
editing the commit-graph-chain file or renaming graph-{hash}.graph
files.
The commit_graph struct already had an object_id struct "oid", but
it was never initialized or used. Add a line to read the hash from
the end of the commit-graph file and into the oid member.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The split commit-graph feature is now fully implemented, but needs
some more run-time configurability. Allow direct callers to 'git
commit-graph write --split' to specify the values used in the
merge strategy and the expire time.
Update the documentation to specify these values.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare the logic for reading a chain of commit-graphs.
First, look for a file at $OBJDIR/info/commit-graph. If it exists,
then use that file and stop.
Next, look for the chain file at $OBJDIR/info/commit-graphs/commit-graph-chain.
If this file exists, then load the hash values as line-separated values in that
file and load $OBJDIR/info/commit-graphs/graph-{hash[i]}.graph for each hash[i]
in that file. The file is given in order, so the first hash corresponds to the
"base" file and the final hash corresponds to the "tip" file.
This implementation assumes that all of the graph-{hash}.graph files are in
the same object directory as the commit-graph-chain file. This will be updated
in a future change. This change is purposefully simple so we can isolate the
different concerns.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we merge commit-graph files in a commit-graph chain, we should clean
up the files that are no longer used.
This change introduces an 'expiry_window' value to the context, which is
always zero (for now). We then check the modified time of each
graph-{hash}.graph file in the $OBJDIR/info/commit-graphs folder and
unlink the files that are older than the expiry_window.
Since this is always zero, this immediately clears all unused graph
files. We will update the value to match a config setting in a future
change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper function commit_compare() actually compares object_id
structs, not commits. A future change to commit-graph.c will need
to sort commit structs, so rename this function in advance.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an environment like a fork network, it is helpful to have a
commit-graph chain that spans both the base repo and the fork repo. The
fork is usually a small set of data on top of the large repo, but
sometimes the fork is much larger. For example, git-for-windows/git has
almost double the number of commits as git/git because it rebases its
commits on every major version update.
To allow cross-alternate commit-graph chains, we need a few pieces:
1. When looking for a graph-{hash}.graph file, check all alternates.
2. When merging commit-graph chains, do not merge across alternates.
3. When writing a new commit-graph chain based on a commit-graph file
in another object directory, do not allow success if the base file
has of the name "commit-graph" instead of
"commit-graphs/graph-{hash}.graph".
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare for a chain of commit-graph files, augment the
commit_graph struct to point to a base commit_graph. As we load
commits from the graph, we may actually want to read from a base
file according to the graph position.
The "graph position" of a commit is given by concatenating the
lexicographic commit orders from each of the commit-graph files in
the chain. This means that we must distinguish two values:
* lexicographic index : the position within the lexicographic
order in a single commit-graph file.
* graph position: the position within the concatenated order
of multiple commit-graph files
Given the lexicographic index of a commit in a graph, we can
compute the graph position by adding the number of commits in
the lower-level graphs. To find the lexicographic index of
a commit, we subtract the number of commits in lower-level graphs.
While here, change insert_parent_or_die() to take a uint32_t
position, as that is the type used by its only caller and that
makes more sense with the limits in the commit-graph format.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The close_commit_graph() method took a repository struct, but then
only uses the raw_object_store within. Change the function prototype
to make the method more flexible.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method is too complex, so we are
extracting helper functions one by one.
Extract write_commit_graph_file() that takes all of the information
in the context struct and writes the data to a commit-graph file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method is too complex, so we are
extracting helper functions one by one.
Extract copy_oids_to_commits(), which fills the commits list
with the distinct commits from the oids list. During this loop,
it also counts the number of "extra" edges from octopus merges.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method is too complex, so we are
extracting helper functions one by one.
Extract count_distinct_commits(), which sorts the oids list, then
iterates through to find duplicates.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method is too complex, so we are
extracting helper functions one by one.
Extract fill_oids_from_all_packs() that reads all pack-files
for commits and fills the oid list in the context.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method is too complex, so we are
extracting helper functions one by one.
Extract fill_oids_from_commit_hex() that reads the given commit
id list and fille the oid list in the context.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method is too complex, so we are
extracting helper functions one by one.
This extracts fill_oids_from_packs() that reads the given
pack-file list and fills the oid list in the context.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method is too large and complex. To simplify
it, we should extract several helper functions. However, we will risk
repeating a lot of declarations related to progress incidators and
object id or commit lists.
Create a new write_commit_graph_context struct that contains the
core data structures used in this process. Replace the other local
variables with the values inside the context object. Following this
change, we will start to lift code segments wholesale out of the
write_commit_graph() method and into helper functions.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() and write_commit_graph_reachable() methods
currently take two boolean parameters: 'append' and 'report_progress'.
As we update these methods, adding more parameters this way becomes
cluttered and hard to maintain.
Collapse these parameters into a 'flags' parameter, and adjust the
callers to provide flags as necessary.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method uses die() to report failure and
exit when confronted with an unexpected condition. This use of
die() in a library function is incorrect and is now replaced by
error() statements and an int return type. Return zero on success
and a negative value on failure.
Now that we use 'goto cleanup' to jump to the terminal condition
on an error, we have new paths that could lead to uninitialized
values. New initializers are added to correct for this.
The builtins 'commit-graph', 'gc', and 'commit' call these methods,
so update them to check the return value. Test that 'git commit-graph
write' returns a proper error code when hitting a failure condition
in write_commit_graph().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further code clean-up to allow the lowest level of name-to-object
mapping layer to work with a passed-in repository other than the
default one.
* nd/sha1-name-c-wo-the-repository: (34 commits)
sha1-name.c: remove the_repo from get_oid_mb()
sha1-name.c: remove the_repo from other get_oid_*
sha1-name.c: remove the_repo from maybe_die_on_misspelt_object_name
submodule-config.c: use repo_get_oid for reading .gitmodules
sha1-name.c: add repo_get_oid()
sha1-name.c: remove the_repo from get_oid_with_context_1()
sha1-name.c: remove the_repo from resolve_relative_path()
sha1-name.c: remove the_repo from diagnose_invalid_index_path()
sha1-name.c: remove the_repo from handle_one_ref()
sha1-name.c: remove the_repo from get_oid_1()
sha1-name.c: remove the_repo from get_oid_basic()
sha1-name.c: remove the_repo from get_describe_name()
sha1-name.c: remove the_repo from get_oid_oneline()
sha1-name.c: add repo_interpret_branch_name()
sha1-name.c: remove the_repo from interpret_branch_mark()
sha1-name.c: remove the_repo from interpret_nth_prior_checkout()
sha1-name.c: remove the_repo from get_short_oid()
sha1-name.c: add repo_for_each_abbrev()
sha1-name.c: store and use repo in struct disambiguate_state
sha1-name.c: add repo_find_unique_abbrev_r()
...
Free the commit graph when verify_commit_graph_lite() reports an error.
Credit to OSS-Fuzz for finding this leak.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"maybe" pointer in 'struct commit' is tricky because it can be lazily
initialized to take advantage of commit-graph if available. This makes
it not safe to access directly.
This leads to a rule in commit.cocci to rewrite 'x->maybe_tree' to
'get_commit_tree(x)'. But that rule alone could lead to incorrectly
rewrite assignments, e.g. from
x->maybe_tree = yes
to
get_commit_tree(x) = yes
Because of this we have a second rule to revert this effect. Szeder
found out that we could do better by performing the assignment rewrite
rule first, then the remaining is read-only access and handled by the
current first rule.
For this to work, we need to transform "x->maybe_tree = y" to something
that does NOT contain "x->maybe_tree" to avoid the original first
rule. This is where set_commit_tree() comes in.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the error emitted when a commit-graph file is corrupt so that
we actually mention the commit-graph, e.g. change errors like:
error: improper chunk offset 0000000000385e0c
To:
error: commit-graph improper chunk offset 0000000000385e0c
As discussed in the commits leading up to this one the commit-graph
machinery is now used by common commands like "status". If the graph
was corrupt we'd often emit some error that gave no indication what
was wrong. Now some of them are still cryptic, but they'll at least
mention "commit-graph" to give the user a hint as to where to look.
While I'm at it mark some of the strings that hadn't been marked for
translation. It's clear from the commit history and the code that this
was merely forgotten at the time, and wasn't intentional.p5
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the commit-graph is written we end up calling
parse_commit(). This will in turn invoke code that'll consult the
existing commit-graph about the commit, if the graph is corrupted we
die.
We thus get into a state where a failing "commit-graph verify" can't
be followed-up with a "commit-graph write" if core.commitGraph=true is
set, the graph either needs to be manually removed to proceed, or
core.commitGraph needs to be set to "false".
Change the "commit-graph write" codepath to use a new
parse_commit_no_graph() helper instead of parse_commit() to avoid
this. The latter will call repo_parse_commit_internal() with
use_commit_graph=1 as seen in 177722b344 ("commit: integrate commit
graph with commit parsing", 2018-04-10).
Not using the old graph at all slows down the writing of the new graph
by some small amount, but is a sensible way to prevent an error in the
existing commit-graph from spreading.
Just fixing the current issue would be likely to result in code that's
inadvertently broken in the future. New code might use the
commit-graph at a distance. To detect such cases introduce a
"GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD" setting used when we do our
corruption tests, and test that a "write/verify" combo works after
every one of our current test cases where we now detect commit-graph
corruption.
Some of the code changes here might be strictly unnecessary, e.g. I
was unable to find cases where the parse_commit() called from
write_graph_chunk_data() didn't exit early due to
"item->object.parsed" being true in
repo_parse_commit_internal() (before the use_commit_graph=1 has any
effect). But let's also convert those cases for good measure, we do
not have exhaustive tests for all possible types of commit-graph
corruption.
This might need to be re-visited if we learn to write the commit-graph
incrementally, but probably not. Hopefully we'll just start by finding
out what commits we have in total, then read the old graph(s) to see
what they cover, and finally write a new graph file with everything
that's missing. In that case the new graph writing code just needs to
continue to use e.g. a parse_commit() that doesn't consult the
existing commit-graphs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier change implemented load_commit_graph_one_fd_st() in a way
that was bug-compatible with earlier code in terms of the "graph file
%s is too small" error message printing out the path to the
commit-graph (".git/objects/info/commit-graph").
But change that, because:
* A function that takes an already-open file descriptor also needing
the filename isn't very intuitive.
* The vast majority of errors we might emit when loading the graph
come from parse_commit_graph(), which doesn't report the
filename. Let's not do that either in this case for consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the commit-graph loading code work as a library that returns an
error code instead of calling exit(1) when the commit-graph is
corrupt. This means that e.g. "status" will now report commit-graph
corruption as an "error: [...]" at the top of its output, but then
proceed to work normally.
This required splitting up the load_commit_graph_one() function so
that the code that deals with open()-ing and stat()-ing the graph can
now be called independently as open_commit_graph().
This is needed because "commit-graph verify" where the graph doesn't
exist isn't an error. See the third paragraph in
283e68c72f ("commit-graph: add 'verify' subcommand",
2018-06-27). There's a bug in that logic where we conflate the
intended ENOENT with other errno values (e.g. EACCES), but this change
doesn't address that. That'll be addressed in a follow-up change.
I'm then splitting most of the logic out of load_commit_graph_one()
into load_commit_graph_one_fd_st(), which allows for providing an
existing file descriptor and stat information to the loading
code. This isn't strictly needed, but it would be redundant and
confusing to open() and stat() the file twice for some of the
codepaths, this allows for calling open_commit_graph() followed by
load_commit_graph_one_fd_st(). The "graph_file" still needs to be
passed to that function for the the "graph file %s is too small" error
message.
This leaves load_commit_graph_one() unused by everything except the
internal prepare_commit_graph_one() function, so let's mark it as
"static". If someone needs it in the future we can remove the "static"
attribute. I could also rewrite its sole remaining
user ("prepare_commit_graph_one()") to use
load_commit_graph_one_fd_st() instead, but let's leave it at this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.commitGraph=true is set, various common commands now consult
the commit graph. Because the commit-graph code is very trusting of
its input data, it's possibly to construct a graph that'll cause an
immediate segfault on e.g. "status" (and e.g. "log", "blame", ...). In
some other cases where git immediately exits with a cryptic error
about the graph being broken.
The root cause of this is that while the "commit-graph verify"
sub-command exhaustively verifies the graph, other users of the graph
simply trust the graph, and will e.g. deference data found at certain
offsets as pointers, causing segfaults.
This change does the bare minimum to ensure that we don't segfault in
the common fill_commit_in_graph() codepath called by
e.g. setup_revisions(), to do this instrument the "commit-graph
verify" tests to always check if "status" would subsequently
segfault. This fixes the following tests which would previously
segfault:
not ok 50 - detect low chunk count
not ok 51 - detect missing OID fanout chunk
not ok 52 - detect missing OID lookup chunk
not ok 53 - detect missing commit data chunk
Those happened because with the commit-graph enabled setup_revisions()
would eventually call fill_commit_in_graph(), where e.g.
g->chunk_commit_data is used early as an offset (and will be
0x0). With this change we get far enough to detect that the graph is
broken, and show an error instead. E.g.:
$ git status; echo $?
error: commit-graph is missing the Commit Data chunk
1
That also sucks, we should *warn* and not hard-fail "status" just
because the commit-graph is corrupt, but fixing is left to a follow-up
change.
A side-effect of changing the reporting from graph_report() to error()
is that we now have an "error: " prefix for these even for
"commit-graph verify". Pseudo-diff before/after:
$ git commit-graph verify
-commit-graph is missing the Commit Data chunk
+error: commit-graph is missing the Commit Data chunk
Changing that is OK. Various errors it emits now early on are prefixed
with "error: ", moving these over and changing the output doesn't
break anything.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath to show progress meter while writing out commit-graph
file has been improved.
* ab/commit-graph-write-progress:
commit-graph write: emit a percentage for all progress
commit-graph write: add itermediate progress
commit-graph write: remove empty line for readability
commit-graph write: add more descriptive progress output
commit-graph write: show progress for object search
commit-graph write: more descriptive "writing out" output
commit-graph write: add "Writing out" progress output
commit-graph: don't call write_graph_chunk_extra_edges() unnecessarily
commit-graph: rename "large edges" to "extra edges"
The codepath to write out commit-graph has been optimized by
following the usual pattern of visiting objects in in-pack order.
* ab/commit-graph-write-optim:
commit-graph write: use pack order when finding commits
The codepath to read from the commit-graph file attempted to read
past the end of it when the file's table-of-contents was corrupt.
* js/commit-graph-chunk-table-fix:
Makefile: correct example fuzz build
commit-graph: fix buffer read-overflow
commit-graph, fuzz: add fuzzer for commit-graph
The in-core repository instances are passed through more codepaths.
* sb/more-repo-in-api: (23 commits)
t/helper/test-repository: celebrate independence from the_repository
path.h: make REPO_GIT_PATH_FUNC repository agnostic
commit: prepare free_commit_buffer and release_commit_memory for any repo
commit-graph: convert remaining functions to handle any repo
submodule: don't add submodule as odb for push
submodule: use submodule repos for object lookup
pretty: prepare format_commit_message to handle arbitrary repositories
commit: prepare logmsg_reencode to handle arbitrary repositories
commit: prepare repo_unuse_commit_buffer to handle any repo
commit: prepare get_commit_buffer to handle any repo
commit-reach: prepare in_merge_bases[_many] to handle any repo
commit-reach: prepare get_merge_bases to handle any repo
commit-reach.c: allow get_merge_bases_many_0 to handle any repo
commit-reach.c: allow remove_redundant to handle any repo
commit-reach.c: allow merge_bases_many to handle any repo
commit-reach.c: allow paint_down_to_common to handle any repo
commit: allow parse_commit* to handle any repo
object: parse_object to honor its repository argument
object-store: prepare has_{sha1, object}_file to handle any repo
object-store: prepare read_object_file to deal with any repo
...
Add sha-256 hash and plug it through the code to allow building Git
with the "NewHash".
* bc/sha-256:
hash: add an SHA-256 implementation using OpenSSL
sha256: add an SHA-256 implementation using libgcrypt
Add a base implementation of SHA-256 support
commit-graph: convert to using the_hash_algo
t/helper: add a test helper to compute hash speed
sha1-file: add a constant for hash block size
t: make the sha1 test-tool helper generic
t: add basic tests for our SHA-1 implementation
cache: make hashcmp and hasheq work with larger hashes
hex: introduce functions to print arbitrary hashes
sha1-file: provide functions to look up hash algorithms
sha1-file: rename algorithm to "sha1"
Follow-up 01ca387774 ("commit-graph: split up close_reachable()
progress output", 2018-11-19) by making the progress bars in
close_reachable() report a completion percentage. This fixes the last
occurrence where in the commit graph writing where we didn't report
that.
The change in 01ca387774 split up the 1x progress bar in
close_reachable() into 3x, but left them as dumb counters without a
percentage completion. Fixing that is easy, and the only reason it
wasn't done already is because that commit was rushed in during the
v2.20.0 RC period to fix the unrelated issue of over-reporting commit
numbers. See [1] and follow-ups for ML activity at the time and [2]
for an alternative approach where the progress bars weren't split up.
Now for e.g. linux.git we'll emit:
$ ~/g/git/git --exec-path=$HOME/g/git commit-graph write
Finding commits for commit graph among packed objects: 100% (6529159/6529159), done.
Expanding reachable commits in commit graph: 100% (815990/815980), done.
Computing commit graph generation numbers: 100% (815983/815983), done.
Writing out commit graph in 4 passes: 100% (3263932/3263932), done.
1. https://public-inbox.org/git/20181119202300.18670-1-avarab@gmail.com/
2. https://public-inbox.org/git/20181122153922.16912-11-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add progress output to sections of code between "Annotating[...]" and
"Computing[...]generation numbers". This can collectively take 5-10
seconds on a large enough repository.
On a test repository with I have with ~7 million commits and ~50
million objects we'll now emit:
$ ~/g/git/git --exec-path=$HOME/g/git commit-graph write
Finding commits for commit graph among packed objects: 100% (124763727/124763727), done.
Loading known commits in commit graph: 100% (18989461/18989461), done.
Expanding reachable commits in commit graph: 100% (18989507/18989461), done.
Clearing commit marks in commit graph: 100% (18989507/18989507), done.
Counting distinct commits in commit graph: 100% (18989507/18989507), done.
Finding extra edges in commit graph: 100% (18989507/18989507), done.
Computing commit graph generation numbers: 100% (7250302/7250302), done.
Writing out commit graph in 4 passes: 100% (29001208/29001208), done.
Whereas on a medium-sized repository such as linux.git these new
progress bars won't have time to kick in and as before and we'll still
emit output like:
$ ~/g/git/git --exec-path=$HOME/g/git commit-graph write
Finding commits for commit graph among packed objects: 100% (6529159/6529159), done.
Expanding reachable commits in commit graph: 815990, done.
Computing commit graph generation numbers: 100% (815983/815983), done.
Writing out commit graph in 4 passes: 100% (3263932/3263932), done.
The "Counting distinct commits in commit graph" phase will spend most
of its time paused at "0/*" as we QSORT(...) the list. That's not
optimal, but at least we don't seem to be stalling anymore most of the
time.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the empty line between a QSORT(...) and the subsequent oideq()
for-loop. This makes it clearer that the QSORT(...) is being done so
that we can run the oideq() loop on adjacent OIDs. Amends code added
in 08fd81c9b6 ("commit-graph: implement write_commit_graph()",
2018-04-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the progress output shown when we're searching for commits to
include in the graph more descriptive. This amends code I added in
7b0f229222 ("commit-graph write: add progress output", 2018-09-17).
Now, on linux.git, we'll emit this sort of output in the various modes
we support:
$ git commit-graph write
Finding commits for commit graph among packed objects: 100% (6529159/6529159), done.
[...]
# Actually we don't emit this since this takes almost no time at
# all. But if we did (s/_delayed//) we'd show:
$ git for-each-ref --format='%(objectname)' | git commit-graph write --stdin-commits
Finding commits for commit graph from 630 refs: 100% (630/630), done.
[...]
$ (cd .git/objects/pack/ && ls *idx) | git commit-graph write --stdin-pack
Finding commits for commit graph in 3 packs: 6529159, done.
[...]
The middle on of those is going to be the output users might see in
practice, since it'll be emitted when they get the commit graph via
gc.writeCommitGraph=true. But as noted above you need a really large
number of refs for this message to show. It'll show up on a test
repository I have with ~165k refs:
Finding commits for commit graph from 165203 refs: 100% (165203/165203), done.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Show the percentage progress for the "Finding commits for commit
graph" phase for the common case where we're operating on all packs in
the repository, as "commit-graph write" or "gc" will do.
Before we'd emit on e.g. linux.git with "commit-graph write":
Finding commits for commit graph: 6529159, done.
[...]
And now:
Finding commits for commit graph: 100% (6529159/6529159), done.
[...]
Since the commit graph only includes those commits that are packed
(via for_each_packed_object(...)) the approximate_object_count()
returns the actual number of objects we're going to process.
Still, it is possible due to a race with "gc" or another process
maintaining packs that the number of objects we're going to process is
lower than what approximate_object_count() reported. In that case we
don't want to stop the progress bar short of 100%. So let's make sure
it snaps to 100% at the end.
The inverse case is also possible and more likely. I.e. that a new
pack has been added between approximate_object_count() and
for_each_packed_object(). In that case the percentage will go beyond
100%, and we'll do nothing to snap it back to 100% at the end.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "Writing out" part of the progress output more
descriptive. Depending on the shape of the graph we either make 3 or 4
passes over it.
Let's present this information to the user in case they're wondering
what this number, which is much larger than their number of commits,
has to do with writing out the commit graph. Now e.g. on linux.git we
emit:
$ ~/g/git/git --exec-path=$HOME/g/git -C ~/g/linux commit-graph write
Finding commits for commit graph: 6529159, done.
Expanding reachable commits in commit graph: 815990, done.
Computing commit graph generation numbers: 100% (815983/815983), done.
Writing out commit graph in 4 passes: 100% (3263932/3263932), done.
A note on i18n: Why are we using the Q_() function and passing a
number & English text for a singular which'll never be used? Because
the plural rules of translated languages may not match those of
English, and to use the plural function we need to use this format.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add progress output to be shown when we're writing out the
commit-graph, this adds to the output already added in 7b0f229222
("commit-graph write: add progress output", 2018-09-17).
As noted in that commit most of the progress output isn't displayed on
small repositories, but before this change we'd noticeably hang for
2-3 seconds at the end on medium sized repositories such as linux.git.
Now we'll instead show output like this, and reduce the
human-observable times at which we're not producing progress output:
$ ~/g/git/git --exec-path=$HOME/g/git -C ~/g/2015-04-03-1M-git commit-graph write
Finding commits for commit graph: 13064614, done.
Expanding reachable commits in commit graph: 1000447, done.
Computing commit graph generation numbers: 100% (1000447/1000447), done.
Writing out commit graph: 100% (3001341/3001341), done.
This "Writing out" number is 3x or 4x the number of commits, depending
on the graph we're processing. A later change will make this explicit
to the user.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The optional 'Extra Edge List' chunk of the commit graph file stores
parent information for commits with more than two parents. Since the
chunk is optional, write_commit_graph() looks through all commits to
find those with more than two parents, and then writes the commit
graph file header accordingly, i.e. if there are no such commits, then
there won't be a 'Extra Edge List' chunk written, only the three
mandatory chunks.
However, when it later comes to writing actual chunk data,
write_commit_graph() unconditionally invokes
write_graph_chunk_extra_edges(), even when it was decided earlier that
that chunk won't be written. Strictly speaking there is no bug here,
because write_graph_chunk_extra_edges() won't write anything if it
doesn't find any commits with more than two parents, but then it
unnecessarily and in vain looks through all commits once again in
search for such commits.
Don't call write_graph_chunk_extra_edges() when that chunk won't be
written to spare an unnecessary iteration over all commits.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The optional 'Large Edge List' chunk of the commit graph file stores
parent information for commits with more than two parents, and the
names of most of the macros, variables, struct fields, and functions
related to this chunk contain the term "large edges", e.g.
write_graph_chunk_large_edges(). However, it's not a really great
term, as the edges to the second and subsequent parents stored in this
chunk are not any larger than the edges to the first and second
parents stored in the "main" 'Commit Data' chunk. It's the number of
edges, IOW number of parents, that is larger compared to non-merge and
"regular" two-parent merge commits. And indeed, two functions in
'commit-graph.c' have a local variable called 'num_extra_edges' that
refer to the same thing, and this "extra edges" term is much better at
describing these edges.
So let's rename all these references to "large edges" in macro,
variable, function, etc. names to "extra edges". There is a
GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency
rename it to GRAPH_EXTRA_EDGES_NEEDED.
We can do so safely without causing any incompatibility issues,
because the term "large edges" doesn't come up in the file format
itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there
is no 'L' in there), but only in the specification text. The string
"large edges", however, does come up in the output of 'git
commit-graph read' and in tests looking at its input, but that command
is explicitly documented as debugging aid, so we can change its output
and the affected tests safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Slightly optimize the "commit-graph write" step by using
FOR_EACH_OBJECT_PACK_ORDER with for_each_object_in_pack(). See commit
[1] and [2] for the facility and a similar optimization for "cat-file".
On Linux it is around 5% slower to run:
echo 1 >/proc/sys/vm/drop_caches &&
cat .git/objects/pack/* >/dev/null &&
git cat-file --batch-all-objects --batch-check --unordered
Than the same thing with the "cat" omitted. This is as expected, since
we're iterating in pack order and the "cat" is extra work.
Before this change the opposite was true of "commit-graph write". We
were 6% faster if we first ran "cat" to efficiently populate the FS
cache for our sole big pack on linux.git, than if we had populated it
via for_each_object_in_pack(). Now we're 3% faster without the "cat"
instead.
My tests were done on an unloaded Linux 3.10 system with 10 runs for
each. Derrick Stolee did his own tests on Windows[3] showing a 2%
improvement with a high degree of accuracy.
1. 736eb88fdc ("for_each_packed_object: support iterating in
pack-order", 2018-08-10)
2. 0750bb5b51 ("cat-file: support "unordered" output for
--batch-all-objects", 2018-08-10)
3. https://public-inbox.org/git/f71fa868-25e8-a9c9-46a6-611b987f1a8f@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fuzz-commit-graph identified a case where Git will read past the end of
a buffer containing a commit graph if the graph's header has an
incorrect chunk count. A simple bounds check in parse_commit_graph()
prevents this.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Break load_commit_graph_one() into a new function, parse_commit_graph().
The latter function operates on arbitrary buffers, which makes it
suitable as a fuzzing target. Since parse_commit_graph() is only called
by load_commit_graph_one() (and the fuzzer described below), we omit
error messages that would be duplicated by the caller.
Adds fuzz-commit-graph.c, which provides a fuzzing entry point
compatible with libFuzzer (and possibly other fuzzing engines).
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a commit-graph, we write GRAPH_MISSING_PARENT if the
parent's object id does not appear in the list of commits to be
written into the commit-graph. This was done as the initial design
allowed commits to have missing parents, but the final version
requires the commit-graph to be closed under reachability. Thus,
this GRAPH_MISSING_PARENT value should never be written.
However, there are reasons why it could be written! These range
from a bug in the reachable-closure code to a memory error causing
the binary search into the list of object ids to fail. In either
case, we should fail fast and avoid writing the commit-graph file
with bad data.
Remove the GRAPH_MISSING_PARENT constant in favor of the constant
GRAPH_EDGE_LAST_MASK, which has the same value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all functions to handle arbitrary repositories in commit-graph.c
that are used by functions taking a repository argument already.
Notable exclusion is write_commit_graph and its local functions as that
only works on the_repository.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the progress output added in 7b0f229222 ("commit-graph write:
add progress output", 2018-09-17) so that the total numbers it reports
aren't higher than the total number of commits anymore. See [1] for a
bug report pointing that out.
When I added this I wasn't intending to provide an accurate count, but
just have some progress output to show the user the command wasn't
hanging[2]. But since we are showing numbers, let's make them
accurate. The progress descriptions were suggested by Derrick Stolee
in [3].
As noted in [2] we are unlikely to show anything except the "Expanding
reachable..." message even on fairly large repositories such as
linux.git. On a test repository I have with north of 7 million commits
all of these are displayed. Two of them don't show up for long, but as
noted in [5] future-proofing this for if the loops become more
expensive in the future makes sense.
1. https://public-inbox.org/git/20181010203738.GE23446@szeder.dev/
2. https://public-inbox.org/git/87pnwhea8y.fsf@evledraar.gmail.com/
3. https://public-inbox.org/git/f7a0cbee-863c-61d3-4959-5cec8b43c705@gmail.com/
4. https://public-inbox.org/git/20181015160545.GG19800@szeder.dev/
5. https://public-inbox.org/git/87murle8da.fsf@evledraar.gmail.com/
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using hard-coded constants for object sizes, use
the_hash_algo to look them up. In addition, use a function call to look
up the object ID version and produce the correct value. For now, we use
version 1, which means to use the default algorithm used in the rest of
the repository.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our handling of alternate object directories is needlessly different
from the main object directory. As a result, many places in the code
basically look like this:
do_something(r->objects->objdir);
for (odb = r->objects->alt_odb_list; odb; odb = odb->next)
do_something(odb->path);
That gets annoying when do_something() is non-trivial, and we've
resorted to gross hacks like creating fake alternates (see
find_short_object_filename()).
Instead, let's give each raw_object_store a unified list of
object_directory structs. The first will be the main store, and
everything after is an alternate. Very few callers even care about the
distinction, and can just loop over the whole list (and those who care
can just treat the first element differently).
A few observations:
- we don't need r->objects->objectdir anymore, and can just
mechanically convert that to r->objects->odb->path
- object_directory's path field needs to become a real pointer rather
than a FLEX_ARRAY, in order to fill it with expand_base_dir()
- we'll call prepare_alt_odb() earlier in many functions (i.e.,
outside of the loop). This may result in us calling it even when our
function would be satisfied looking only at the main odb.
But this doesn't matter in practice. It's not a very expensive
operation in the first place, and in the majority of cases it will
be a noop. We call it already (and cache its results) in
prepare_packed_git(), and we'll generally check packs before loose
objects. So essentially every program is going to call it
immediately once per program.
Arguably we should just prepare_alt_odb() immediately upon setting
up the repository's object directory, which would save us sprinkling
calls throughout the code base (and forgetting to do so has been a
source of subtle bugs in the past). But I've stopped short of that
here, since there are already a lot of other moving parts in this
patch.
- Most call sites just get shorter. The check_and_freshen() functions
are an exception, because they have entry points to handle local and
nonlocal directories separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for unifying the handling of alt odb's and the normal
repo object directory, let's use a more neutral name. This patch is
purely mechanical, swapping the type name, and converting any variables
named "alt" to "odb". There should be no functional change, but it will
reduce the noise in subsequent diffs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recently introduced commit-graph auxiliary data is incompatible
with mechanisms such as replace & grafts that "breaks" immutable
nature of the object reference relationship. Disable optimizations
based on its use (and updating existing commit-graph) when these
incompatible features are in use in the repository.
* ds/commit-graph-with-grafts:
commit-graph: close_commit_graph before shallow walk
commit-graph: not compatible with uninitialized repo
commit-graph: not compatible with grafts
commit-graph: not compatible with replace objects
test-repository: properly init repo
commit-graph: update design document
refs.c: upgrade for_each_replace_ref to be a each_repo_ref_fn callback
refs.c: migrate internal ref iteration to pass thru repository argument
Generation of (experimental) commit-graph files have so far been
fairly silent, even though it takes noticeable amount of time in a
meaningfully large repository. The users will now see progress
output.
* ab/commit-graph-progress:
gc: fix regression in 7b0f229222 impacting --quiet
commit-graph verify: add progress output
commit-graph write: add progress output
While writing a commit-graph file, we store the full list of
commits in a flat list. We use this list for sorting and ensuring
we are closed under reachability.
The initial allocation assumed that (at most) one in four objects
is a commit. This is a dramatic over-count for many repos,
especially large ones. Since we grow the repo dynamically, reduce
this count by a factor of eight. We still set it to a minimum of
1024 before allocating.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method in commit-graph.c leaks some lits
and strings during execution. In addition, a list of strings is
leaked in write_commit_graph_reachable(). Clean these up so our
memory checking is cleaner.
Further, if we use a list of pack-files to find the commits, we
can leak the packed_git structs after scanning them for commits.
Running the following commands demonstrates the leak before and
the fix after:
* valgrind --leak-check=full ./git commit-graph write --reachable
* valgrind --leak-check=full ./git commit-graph write --stdin-packs
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
For the reasons explained in the "commit-graph write: add progress
output" commit leading up to this one, emit progress on "commit-graph
verify". Since e0fd51e1d7 ("fsck: verify commit-graph", 2018-06-27)
"git fsck" has called this command if core.commitGraph=true, but
there's been no progress output to indicate that anything was
different. Now there is (on my tiny dotfiles.git repository):
$ git -c core.commitGraph=true -C ~/ fsck
Checking object directories: 100% (256/256), done.
Checking objects: 100% (2821/2821), done.
dangling blob 5b8bbdb9b788ed90459f505b0934619c17cc605b
Verifying commits in commit graph: 100% (867/867), done.
And on a larger repository, such as the 2015-04-03-1M-git.git test
repository:
$ time git -c core.commitGraph=true -C ~/g/2015-04-03-1M-git/ commit-graph verify
Verifying commits in commit graph: 100% (1000447/1000447), done.
real 0m7.813s
[...]
Since the "commit-graph verify" subcommand is never called from "git
gc", we don't have to worry about passing some some "report_progress"
progress variable around for this codepath.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this change the "commit-graph write" command didn't report any
progress. On my machine this command takes more than 10 seconds to
write the graph for linux.git, and around 1m30s on the
2015-04-03-1M-git.git[1] test repository (a test case for a large
monorepository).
Furthermore, since the gc.writeCommitGraph setting was added in
d5d5d7b641 ("gc: automatically write commit-graph files", 2018-06-27),
there was no indication at all from a "git gc" run that anything was
different. This why one of the progress bars being added here uses
start_progress() instead of start_delayed_progress(), so that it's
guaranteed to be seen. E.g. on my tiny 867 commit dotfiles.git
repository:
$ git -c gc.writeCommitGraph=true gc
Enumerating objects: 2821, done.
[...]
Computing commit graph generation numbers: 100% (867/867), done.
On larger repositories, such as linux.git the delayed progress bar(s)
will kick in, and we'll show what's going on instead of, as was
previously happening, printing nothing while we write the graph:
$ git -c gc.writeCommitGraph=true gc
[...]
Annotating commits in commit graph: 1565573, done.
Computing commit graph generation numbers: 100% (782484/782484), done.
Note that here we don't show "Finding commits for commit graph", this
is because under "git gc" we seed the search with the commit
references in the repository, and that set is too small to show any
progress, but would e.g. on a smaller repo such as git.git with
--stdin-commits:
$ git rev-list --all | git -c gc.writeCommitGraph=true write --stdin-commits
Finding commits for commit graph: 100% (162576/162576), done.
Computing commit graph generation numbers: 100% (162576/162576), done.
With --stdin-packs we don't show any estimation of how much is left to
do. This is because we might be processing more than one pack. We
could be less lazy here and show progress, either by detecting that
we're only processing one pack, or by first looping over the packs to
discover how many commits they have. I don't see the point in doing
that work. So instead we get (on 2015-04-03-1M-git.git):
$ echo pack-<HASH>.idx | git -c gc.writeCommitGraph=true --exec-path=$PWD commit-graph write --stdin-packs
Finding commits for commit graph: 13064614, done.
Annotating commits in commit graph: 3001341, done.
Computing commit graph generation numbers: 100% (1000447/1000447), done.
No GC mode uses --stdin-packs. It's what they use at Microsoft to
manually compute the generation numbers for their collection of large
packs which are never coalesced.
The reason we need a "report_progress" variable passed down from "git
gc" is so that we don't report this output when we're running in the
process "git gc --auto" detaches from the terminal.
Since we write the commit graph from the "git gc" process itself (as
opposed to what we do with say the "git repack" phase), we'd end up
writing the output to .git/gc.log and reporting it to the user next
time as part of the "The last gc run reported the following[...]"
error, see 329e6e8794 ("gc: save log from daemonized gc --auto and
print it next time", 2015-09-19).
So we must keep track of whether or not we're running in that
demonized mode, and if so print no progress.
See [2] and subsequent replies for a discussion of an approach not
taken in compute_generation_numbers(). I.e. we're saying "Computing
commit graph generation numbers", even though on an established
history we're mostly skipping over all the work we did in the
past. This is similar to the white lie we tell in the "Writing
objects" phase (not all are objects being written).
Always showing progress is considered more important than
accuracy. I.e. on a repository like 2015-04-03-1M-git.git we'd hang
for 6 seconds with no output on the second "git gc" if no changes were
made to any objects in the interim if we'd take the approach in [2].
1. https://github.com/avar/2015-04-03-1M-git
2. <c6960252-c095-fb2b-e0bc-b1e6bb261614@gmail.com>
(https://public-inbox.org/git/c6960252-c095-fb2b-e0bc-b1e6bb261614@gmail.com/)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rounds out the previous three patches, covering the
inequality logic for the "hash" variant of the functions.
As with the previous three, the accompanying code changes
are the mechanical result of applying the coccinelle patch;
see those patches for more discussion.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the flip side of the previous two patches: checking
for a non-zero oidcmp() can be more strictly expressed as
inequality. Like those patches, we write "!= 0" in the
coccinelle transformation, which covers by isomorphism the
more common:
if (oidcmp(E1, E2))
As with the previous two patches, this patch can be achieved
almost entirely by running "make coccicheck"; the only
differences are manual line-wrap fixes to match the original
code.
There is one thing to note for anybody replicating this,
though: coccinelle 1.0.4 seems to miss the case in
builtin/tag.c, even though it's basically the same as all
the others. Running with 1.0.7 does catch this, so
presumably it's just a coccinelle bug that was fixed in the
interim.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph feature is tested in isolation by
t5318-commit-graph.sh and t6600-test-reach.sh, but there are many
more interesting scenarios involving commit walks. Many of these
scenarios are covered by the existing test suite, but we need to
maintain coverage when the optional commit-graph structure is not
present.
To allow running the full test suite with the commit-graph present,
add a new test environment variable, GIT_TEST_COMMIT_GRAPH. Similar
to GIT_TEST_SPLIT_INDEX, this variable makes every Git command try
to load the commit-graph when parsing commits, and writes the
commit-graph file after every 'git commit' command.
There are a few tests that rely on commits not existing in
pack-files to trigger important events, so manually set
GIT_TEST_COMMIT_GRAPH to false for the necessary commands.
There is one test in t6024-recursive-merge.sh that relies on the
merge-base algorithm picking one of two ambiguous merge-bases, and
the commit-graph feature changes which merge-base is picked.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call close_commit_graph() when about to start a rev-list walk that
includes shallow commits. This is necessary in code paths that "fake"
shallow commits for the sake of fetch. Specifically, test 351 in
t5500-fetch-pack.sh runs
git fetch --shallow-exclude one origin
with a file-based transfer. When the "remote" has a commit-graph, we do
not prevent the commit-graph from being loaded, but then the commits are
intended to be dynamically transferred into shallow commits during
get_shallow_commits_by_rev_list(). By closing the commit-graph before
this call, we prevent this interaction.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Augment commit_graph_compatible(r) to return false when the given
repository r has commit grafts or is a shallow clone. Test that in these
situations we ignore existing commit-graph files and we do not write new
commit-graph files.
Helped-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create new method commit_graph_compatible(r) to check if a given
repository r is compatible with the commit-graph feature. Fill the
method with a check to see if replace-objects exist. Test this
interaction succeeds, including ignoring an existing commit-graph and
failing to write a new commit-graph. However, we do ensure that
we write a new commit-graph by setting read_replace_refs to 0, thereby
ignoring the replace refs.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The API to iterate over all objects learned to optionally list
objects in the order they appear in packfiles, which helps locality
of access if the caller accesses these objects while as objects are
enumerated.
* jk/for-each-object-iteration:
for_each_*_object: move declarations to object-store.h
cat-file: use a single strbuf for all output
cat-file: split batch "buf" into two variables
cat-file: use oidset check-and-insert
cat-file: support "unordered" output for --batch-all-objects
cat-file: rename batch_{loose,packed}_object callbacks
t1006: test cat-file --batch-all-objects with duplicates
for_each_packed_object: support iterating in pack-order
for_each_*_object: give more comprehensive docstrings
for_each_*_object: take flag arguments as enum
for_each_*_object: store flag definitions in a single location
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
We currently iterate over objects within a pack in .idx
order, which uses the object hashes. That means that it
is effectively random with respect to the location of the
object within the pack. If you're going to access the actual
object data, there are two reasons to move linearly through
the pack itself:
1. It improves the locality of access in the packfile. In
the cold-cache case, this may mean fewer disk seeks, or
better usage of disk cache.
2. We store related deltas together in the packfile. Which
means that the delta base cache can operate much more
efficiently if we visit all of those related deltas in
sequence, as the earlier items are likely to still be
in the cache. Whereas if we visit the objects in
random order, our cache entries are much more likely to
have been evicted by unrelated deltas in the meantime.
So in general, if you're going to access the object contents
pack order is generally going to end up more efficient.
But if you're simply generating a list of object names, or
if you're going to end up sorting the result anyway, you're
better off just using the .idx order, as finding the pack
order means generating the in-memory pack-revindex.
According to the numbers in 8b8dfd5132 (pack-revindex:
radix-sort the revindex, 2013-07-11), that takes about 200ms
for linux.git, and 20ms for git.git (those numbers are a few
years old but are still a good ballpark).
That makes it a good optimization for some cases (we can
save tens of seconds in git.git by having good locality of
delta access, for a 20ms cost), but a bad one for others
(e.g., right now "cat-file --batch-all-objects
--batch-check="%(objectname)" is 170ms in git.git, so adding
20ms to that is noticeable).
Hence this patch makes it an optional flag. You can't
actually do any interesting timings yet, as it's not plumbed
through to any user-facing tools like cat-file. That will
come in a later patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The is_descendant_of method previously used in_merge_bases() to check if
the commit can reach any of the commits in the provided list. This had
two performance problems:
1. The performance is quadratic in worst-case.
2. A single in_merge_bases() call requires walking beyond the target
commit in order to find the full set of boundary commits that may be
merge-bases.
The can_all_from_reach method avoids this quadratic behavior and can
limit the search beyond the target commits using generation numbers. It
requires a small prototype adjustment to stop using commit-date as a
cutoff, as that optimization is no longer appropriate here.
Since in_merge_bases() uses paint_down_to_common(), is_descendant_of()
naturally found cutoffs to avoid walking the entire commit graph. Since
we want to always return the correct result, we cannot use the
min_commit_date cutoff in can_all_from_reach. We then rely on generation
numbers to provide the cutoff.
Since not all repos will have a commit-graph file, nor will we always
have generation numbers computed for a commit-graph file, create a new
method, generation_numbers_enabled(), that checks for a commit-graph
file and sees if the first commit in the file has a non-zero generation
number. In the case that we do not have generation numbers, use the old
logic for is_descendant_of().
Performance was meausured on a copy of the Linux repository using the
'test-tool reach is_descendant_of' command using this input:
A:v4.9
X:v4.10
X:v4.11
X:v4.12
X:v4.13
X:v4.14
X:v4.15
X:v4.16
X:v4.17
X.v3.0
Note that this input is tailored to demonstrate the quadratic nature of
the previous method, as it will compute merge-bases for v4.9 versus all
of the later versions before checking against v4.1.
Before: 0.26 s
After: 0.21 s
Since we previously used the is_descendant_of method in the ref_newer
method, we also measured performance there using
'test-tool reach ref_newer' with this input:
A:v4.9
B:v3.19
Before: 0.10 s
After: 0.08 s
By adding a new commit with parent v3.19, we test the non-reachable case
of ref_newer:
Before: 0.09 s
After: 0.08 s
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a struct repository argument to the functions in commit-graph.h that
read the commit graph. (This commit does not affect functions that write
commit graphs.)
Because the commit graph functions can now read the commit graph of any
repository, the global variable core_commit_graph has been removed.
Instead, the config option core.commitGraph is now read on the first
time in a repository that a commit is attempted to be parsed using its
commit graph.
This commit includes a test that exercises the functionality on an
arbitrary repository that is not the_repository.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of storing commit graphs in static variables, store them in
struct object_store. There are no changes to the signatures of existing
functions - they all still only support the_repository, and support for
other instances of struct repository will be added in a subsequent
commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two functions in the code (1) check if the repository is configured for
commit graphs, (2) call prepare_commit_graph(), and (3) check if the
graph exists. Move (1) and (3) into prepare_commit_graph(), reducing
duplication of code.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of
lookup_commit_reference_gently to be more specific about which
repository to handle. This is a small mechanical change; it doesn't
change the implementation to handle repositories other than
the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_tree
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau
Junio C Hamano
Jeff King
Derrick Stolee
Garima Singh
René Scharfe
Elijah Newren
Alex Henrie
SZEDER Gábor
Josh Steadmon
Nguyễn Thái Ngọc Duy
Ævar Arnfjörð Bjarmason
Stefan Beller
brian m. carlson
Jonathan Tan