For projects that do not release official archives, gitweb's snapshot
feature would be an excellent alternative, and but without the '-n'
('--no-name') argument, gzip includes a timestamp in output which results
in different files. Because some systems hash/checksum downloaded files
to ensure integrity of the tarball (e.g FreeBSD), it is desirable to
produce tarballs in a reproducible way for that purpose.
Whilst '--no-name' is more descriptive, the long version of the flag is
not supported on all systems. In particular, OpenBSD does not appear to
support it.
Supply '-n' to gzip to exclude timestamp from output and produce idential
output every time.
Signed-off-by: Fraser Tweedale <frase@frase.id.au>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I found that some doubled words had snuck back into projects from which
I'd already removed them, so now there's a "syntax-check" makefile rule in
gnulib to help prevent recurrence.
Running the command below spotted a few in git, too:
git ls-files | xargs perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt])\s+\1\b/gims)' \
-e '{$n=($` =~ tr/\n/\n/ + 1); ($v=$&)=~s/\n/\\n/g;' \
-e 'print "$ARGV:$n:$v\n"}'
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract converting numerical timezone in the form of '(+|-)HHMM' to
timezoneOffset function, and fix parsing of negative fractional
timezones.
This is used to format timestamps in 'blame_incremental' view; this
complements commit 2b1e172 (gitweb: Fix handling of fractional
timezones in parse_date, 2011-03-25).
Now
gitweb.cgi/git.git/blame_incremental/3fe5489:/contrib/gitview/gitview#l853
and
gitweb.cgi/git.git/blame/3fe5489:/contrib/gitview/gitview#l853
show the same correct time in author's local timezone in title
(on mouseover) [Aneesh Kumar K.V, 2006-02-24 00:59:42 +0530].
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fractional timezones, like -0330 (NST used in Canada) or +0430
(Afghanistan, Iran DST), were not handled properly in parse_date; this
means values such as 'minute_local' and 'iso-tz' were not generated
correctly.
This was caused by two mistakes:
* sign of timezone was applied only to hour part of offset, and not
as it should be also to minutes part (this affected only negative
fractional timezones).
* 'int $h + $m/60' is 'int($h + $m/60)' and not 'int($h) + $m/60',
so fractional part was discarded altogether ($h is hours, $m is
minutes, which is always less than 60).
Note that positive fractional timezones +0430, +0530 and +1030 can be
found as authortime in git.git repository itself.
For example http://repo.or.cz/w/git.git/commit/88d50e7 had authortime
of "Fri, 8 Jan 2010 18:48:07 +0000 (23:48 +0530)", which is not marked
with 'atnight', when "git show 88d50e7" gives correct author date of
"Sat Jan 9 00:18:07 2010 +0530".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Timezone is required to correctly set local time, which would be needed
for future 'localtime' feature.
While at it, remove unnecessary call to the function from git_log_body,
as its return value is not used anywhere.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When $feature{'pathinfo'} is used, gitweb script sets the base URL to
itself, so that relative links to static files work correctly. It
does it by adding something like below to HTML head:
<base href="http://HOST/gitweb.cgi">
This breaks the "patch" anchor links seen on the commitdiff pages,
because these links, being relative (<a href="#patch1">), are resolved
(computed) relative to the base URL and not relative to current URL,
i.e. as:
http://HOST/gitweb.cgi#patch1
Instead, they should look like this:
35a9811ef9 (patch1)
Add an "-anchor" parameter to href(), and use href(-anchor=>"patch1")
to generate "patch" anchor links, so that the full path is included in
the patch link.
While at it, convert
print "foo";
print "bar";
to
print "foo" .
"bar";
in the neighborhood of changes.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider the following code fragment:
/*
* test
*/
vim ":set list" mode shows that the first character on each line is a
tab:
^I/*$
^I * test$
^I */$
By default, the "highlight" program will retain the tabs in the HTML
output:
$ highlight --fragment --syntax c test.c
<span class="hl com">/*</span>
<span class="hl com"> * test</span>
<span class="hl com"> */</span>
vim list mode:
^I<span class="hl com">/*</span>$
<span class="hl com">^I * test</span>$
<span class="hl com">^I */</span>$
In gitweb, this winds up looking something like:
1 /*
2 * test
3 */
I tried both Firefox and Opera and saw the same behavior.
The desired output is:
1 /*
2 * test
3 */
This can be accomplished by specifying "--replace-tabs=8" on the
highlight command line.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Acked-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change S_ISREG($to_mode_oct) to S_ISREG($from_mode_oct) in the branch
that handles from modes, not to modes. This logic appears to have been
caused by copy/paste programming by Jakub Narebski in e8e41a93. It
would be better to rewrite this code not to be duplicated, but I
haven't done so.
This issue caused a failing test on perl 5.13.9, which has a warning
that turned this up:
gitweb.perl: Use of uninitialized value in subroutine entry at /home/avar/g/git/t/../gitweb/gitweb.perl line 4415.
Which caused the Git test suite to fail on this test:
./t9500-gitweb-standalone-no-errors.sh (Wstat: 256 Tests: 90 Failed: 84)
Failed tests: 1-8, 10-36, 38-45, 47-48, 50-88
Non-zero exit status: 1
Reported-by: perl 5.13.9
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the qw(...) construct as implicit parentheses was deprecated in
perl 5.13.5. Change the relevant code in gitweb to not use the
deprecated construct. The offending code was introduced in 3562198b by
Jakub Narebski.
The issue is that perl will now warn about this:
$ perl -wE 'for my $i qw(a b) { say $i }'
Use of qw(...) as parentheses is deprecated at -e line 1.
a
b
This caused gitweb.perl to warn on perl 5.13.5 and above, and these
tests to fail on those perl versions:
./t9501-gitweb-standalone-http-status.sh (Wstat: 256 Tests: 11 Failed: 10)
Failed tests: 2-11
Non-zero exit status: 1
./t9502-gitweb-standalone-parse-output.sh (Wstat: 256 Tests: 10 Failed: 9)
Failed tests: 2-10
Non-zero exit status: 1
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some optional additional Perl modules are required for some of extra
features. Mention those in gitweb/INSTALL.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--xhtml" option is supported only in highlight < 3.0. There is no option
to enforce (X)HTML output format compatible with both highlight < 3.0 and
highlight >= 3.0. However default output format is HTML so we don't need to
explicitly specify it.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Helped-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It happens that closing file descriptor fails whereas the blob is
perfectly readable. According to perlman the reasons could be:
If the file handle came from a piped open, "close" will additionally
return false if one of the other system calls involved fails, or if the
program exits with non-zero status. (If the only problem was that the
program exited non-zero, $! will be set to 0.) Closing a pipe also waits
for the process executing on the pipe to complete, in case you want to
look at the output of the pipe afterwards, and implicitly puts the exit
status value of that command into $?.
Prematurely closing the read end of a pipe (i.e. before the process writ-
ing to it at the other end has closed it) will result in a SIGPIPE being
delivered to the writer. If the other end can't handle that, be sure to
read all the data before closing the pipe.
In this case we don't mind that close fails.
Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some sites may not want to have a logo at all.
While at it, use $cgi->img to simplify this code. (CGI.pm learned
most HTML4 tags by version 2.79, so this should be portable to perl
5.8, though I haven't tested.)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With v1.5.0-rc0~169 (gitweb: Fix Atom feed <logo>: it is $logo,
not $logo_url, 2006-12-04), the logo URI to be written to Atom
feeds was corrected but the case of no logo forgotten.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: Include links to feeds in HTML header only for '200 OK' response
fsck docs: remove outdated and useless diagnostic
userdiff: fix typo in ruby and python word regexes
trace.c: mark file-local function static
Fix typo in git-gc document.
To do that, generating "<link />"s to feeds were refactored into
print_feed_meta() subroutine, to keep nesting (indent) level in
git_header_html() low. This has also the advantage of making code
more clear.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is needed only to escape attributes of handcrafted HTML elements,
and not those generated using CGI.pm subroutines / methods for HTML
generation.
While at it, add esc_url and esc_html where needed, and prefer to use
CGI.pm HTML generating methods than handcrafted HTML code. Most of
those are probably unnecessary (could be exploited only by person with
write access to gitweb config, or at least access to the repository).
This fixes CVE-2010-3906
Reported-by: Emanuele Gentili <e.gentili@tigersecurity.it>
Helped-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating path_info part of link, don't encode space as '+', because
while $cgi->param('foo') translates '+' in query param to ' ', neither
$ENV{'PATH_INFO'} nor $cgi->path_info() do.
This fixes the issue with pathnames with embedded whitespace and
$feature{'pathinfo'} / path_info links. It is done by using newly
introduced esc_path_info() instead of esc_url() in href() subroutine.
Also while links are more clear not escaping space (' ') characters in
generated links, the trailing space must be URI-encoded, otherwise would
get discarded.
Issue noticed thanks to John 'Warthog9' Hawley.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gb/gitweb-remote-heads:
git instaweb: enable remote_heads
gitweb: group remote heads by remote
gitweb: provide a routine to display (sub)sections
gitweb: refactor repository URL printing
gitweb: remotes view for a single remote
gitweb: allow action specialization in page header
gitweb: nagivation menu for tags, heads and remotes
gitweb: separate heads and remotes lists
gitweb: git_get_heads_list accepts an optional list of refs
gitweb: introduce remote_heads feature
gitweb: use fullname as hash_base in heads link
Global variables $my_url, $my_uri and $base_url have subtle interactions
that need to be desribed, and can be influenced most cleanly by
$per_request_config.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow selecting whether configuration file should be (re)parsed on each
request (the default, for backward compatibility with configurations that
change per session, see commit 7f425db (gitweb: allow configurations that
change with each request, 2010-07-30)), or whether should it be parsed only
once (for performance speedup for persistent environments, though currently
only FastCGI is able to make use of it, when flexibility is not important).
You can also have configuration file parsed only once, but have parts of
configuration (re)evaluated once per each request.
This is done by introducing $per_request_config variable: if set to code
reference, this code would be run once per request, while config file would
be parsed only once. For example gitolite's contrib/gitweb/gitweb.conf
fragment mentioned in 7f425db could be rewritten as
our $per_request_config = sub {
$ENV{GL_USER} = ($cgi && $cgi->remote_user) || "gitweb";
};
to make use of this feature.
If $per_request_config is not a code reference, it is taken to be boolean
variable, to choose between running config file for each request
(flexibility), and running config file only once (performance in
persistent environments).
The default value for $per_request_config is 1 (true), which means that
old configuration that require to change per session (like gitolite's)
will keep working.
While at it, make it so evaluate_git_version() is run only once.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-test:
gitweb/Makefile: Include gitweb/config.mak
gitweb/Makefile: Add 'test' and 'test-installed' targets
t/gitweb-lib.sh: Add support for GITWEB_TEST_INSTALLED
gitweb: Move call to evaluate_git_version after evaluate_gitweb_config
In remote and summary view, display a block for each remote, with the
fetch and push URL(s) as well as the list of the remote heads.
In summary view, if the number of remotes is higher than a prescribed
limit, only display the first <limit> remotes and their fetch and push
urls, without any heads information and without grouping.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The routine puts the given contento into a DIV element, automatically
adding a header div. The content can be provided as a standard scalar
value (which is used as-is), as a scalar ref (which is HTML-escaped), as
a function reference to be executed, or as a file handle to be dumped.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the code to display the repository URL(s) from summary view
into a format_rep_url() routine.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'remotes' view is passed the 'hash' parameter, interpret it as the
name of a remote and limit the view the the heads of that remote.
In single-remote view we let the user switch easily to the default
remotes view by specifying an -action_extra for the page header and by
enabling the 'remotes' link in the reference navigation submenu.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An optional -action_extra parameter is given to git_header_html() to
identify a variant of the action that is being displayed. For example,
this can be used to specify that the remotes view is being used for a
specific remote and not to display all remotes.
When -action_extra is provided, the action name in the header will be
turned into a link to the action without any arguments or parameters, to
provide a quick link to the non-specific variant of the action.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tags, heads and remotes are all views that inspect a (particular class
of) refs, so allow the user to easily switch between them by adding
the appropriate navigation submenu to each view.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We specialize the 'heads' action to only display local branches, and
introduce a 'remotes' action to display the remote branches (only
available when the remotes_head feature is enabled).
Mirroring this, we also split the heads list in summary view into
local and remote lists, each linking to the appropriate action.
The git_get_heads_list now defaults to 'heads' only, regardless of
whether the remote heads feature is active or not.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_get_heads_list(limit, class1, class2, ...) can now be used to retrieve
refs/class1, refs/class2 etc. Defaults to ('heads', 'remotes') or ('heads')
depending on whether the 'remote_heads' feature is enabled or not.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this feature enabled, remote heads are retrieved (and displayed)
when getting (and displaying) the heads list. Typical usage would be for
local repository browsing, e.g. by using git-instaweb (or even a more
permanent gitweb setup), to check the repository status and the relation
between tracking branches and the originating remotes.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, if names are manipulated for display, the link will point to
the wrong head.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We say 'use 5.008' at the beginning of the script, therefore there is no
need to check if Time::HiRes module is available. We can also import
gettimeofday and tv_interval.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eli Barzilay noticed that
http://server/gitweb/project/<commit-sha1>
link goes to 'shortlog' view, while 'commit' view would be more
useful, but that 'shortlog' action is more apropriate for
http://server/gitweb/project/<commit-sha1>..<other-commit-sha1>
links.
Therefore for the case when we don't have either action, or filename,
or parent hash [base] in path_info-based URL, i.e. for
http://server/gitweb/project/<object-id>
link, instead of using 'shortlog' view we allow dispatch() subroutine
to detect type of object and use appropriate action (in most case it
would be either 'commit' action, or 'tag', or 'tree' for top
directory).
Requested-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Tested-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was bug in parsing "project/:/file" and "project/:/" path_info
URLs, with implicit HEAD as 'hash_base'.
For such URLs the refname is empty, and before this fix regexp for
parsing path_info fragment assumed that it is always non-empty.
Refname cannot contain ':', as per 'git check-ref-format'.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow for gitweb-specific Makefile config to reside in config.mak file
in the 'gitweb/' subdirectory. This means that gitweb-specific
build-time configuration variable can reside in gitweb-specific
gitweb/config.mak
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'test-installed' target in gitweb/Makefile tests installed gitweb,
using the same destination directory that 'install' target uses.
The 'test' target is just a convenience wrapper invoking 'gitweb-test'
target of t/Makefile.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now evaluate_git_version() is inside run_request() to be called for each
request, instead of once per starting gitweb; this currently matters only
when using FastCGI interface (gitweb.fcgi).
This change was done because evaluate_git_version() uses $GIT variable,
which can be set / modified by gitweb config file, but the variable is
modified this way by gitweb config file used in gitweb tests. Without
this change there is spurious extra output from t9500 test when tests are
run with '--debug' option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow build-time/run-time configuration of the highlight executable
(must be the one from http://www.andre-simon.de due to assumptions
about parameters and output). Defaults to previous behavior which
assumes that highlight is available on the server PATH. However, if
this is not the case, the path to the highlight executable can be
configured at build time as a configuration variable
HIGHLIGHT_BIN = /path/to/highlight
or at runtime by configuring GITWEB_CONFIG
$highlight_bin = /path/to/highlight
Signed-off-by: Christopher Wilson <cwilson@cdwilson.us>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an XML error when visiting a nonexistent tag
(i.e. "../gitweb.cgi?p=git.git;a=tag;h=refs/tags/BADNAME").
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: clarify search results page when no matching commit found
Documentation: add a FILES section for show-ref
Makefile: add missing dependency on http.h
Makefile: add missing dependencies on url.h
Documentation/git-log: Clarify --full-diff
git-rebase: fix typo when parsing --force-rebase
imap-send: Fix sprintf usage
prune: allow --dry-run for -n and --verbose for -v
notes: allow --dry-run for -n and --verbose for -v
Document -B<n>[/<m>], -M<n> and -C<n> variants of -B, -M and -C
Documentation: cite git-am from git-apply
t7003: fix subdirectory-filter test
Allow "check-ref-format --branch" from subdirectory
check-ref-format: handle subcommands in separate functions
pretty-options.txt: match --format's documentation with implementation.
When searching commits for a string that never occurs, the results
page looks something like this:
projects / foo.git / search \o/
summary | ... | tree [commit] search: [ kfjdkas ] [ ]re
first ⋅ prev ⋅ next
Merge branch 'maint'
Foo: a demonstration project
Without a list of hits to compare it to, the header describing the
commit named by the hash parameter (usually HEAD) may itself look
like a hit. Add some text (“No match.”) to replace the empty
list of hits and avoid this confusion.
While at it, remove some nearby dead code, left behind from a
simplification a few years ago (v1.5.4-rc0~276^2~4, 2007-11-01).
Noticed-by: Erick Mattos <erick.mattos@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Run $post_dispatch_hook->() not $pre_dispatch_hook->() after each
request.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitolite's contrib/gitweb/gitweb.conf includes:
$ENV{GL_USER} = $cgi->remote_user || "gitweb";
which is useful for setups where a user has to be authenticated
to access certain repos. Perhaps other typical configurations
change per session in other ways, too.
v1.7.2-rc2~6 (gitweb: Move evaluate_gitweb_config out of run_request,
2010-07-05) broke such configurations for a speedup, by loading
the configuration once per FastCGI process.
Probably in the end there should be a way to specify in the
configuration whether a particular installation wants the speedup or
the flexibility. But for now it is easier to just undo the relevant
change.
This partially reverts commit 869d58813b.
Reported-by: Julio Lajara <julio.lajara@alum.rpi.edu>
Analysis-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move highlight config out of guess_file_syntax() so that it can be
extended/overridden by system/user configuration.
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 452e225 (gitweb: fix esc_param, 2009-10-13) fixed CGI escaping
rules used in esc_url. A very similar logic exists in esc_param and needs
to be fixed the same way.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move evaluate_gitweb_config() and evaluate_git_version() out of
run_request() to run(), making them not run one for each request.
This changes how git behaves in FastCGI case.
This change makes it impossible to have config which changes with
request, but I don't think anyone relied on such (hidden action)
behavior.
While at it, reset timer and number of git commands at beginning of
run_request() in new reset_timer() subroutine. This fixes case when
gitweb was run using FastCGI interface: time is reported for request,
and not for single run of gitweb script. This changes slightly
behavior in non-FastCGI case: the number of git commands reported is
1 less (running `git --version` one per gitweb is not counted now).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-fastcgi:
gitweb: Run in FastCGI mode if gitweb script has .fcgi extension
gitweb: Add support for FastCGI, using CGI::Fast
gitweb: Put all per-connection code in run() subroutine
This typo has been in place since the rule was originally added by
0e6ce21 (Gitweb: add support for minifying gitweb.css).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-plackup:
git-instaweb: Add support for running gitweb via 'plackup'
git-instaweb: Wait for server to start before running web browser
git-instaweb: Remove pidfile after stopping web server
git-instaweb: Configure it to work with new gitweb structure
git-instaweb: Put httpd logs in a "$httpd_only" subdirectory
gitweb: Set default destination directory for installing gitweb in Makefile
gitweb: Move static files into seperate subdirectory
Check if there is a caller in top frame of gitweb, and either 'return'
if gitweb code is wrapped in subroutine, or 'exit' if it is not.
This should avoid
gitweb.cgi: Subroutine git_SOMETHING redefined at gitweb.cgi line NNN
warnings in error_log when running gitweb with mod_perl (using
ModPerl::Registry handler)
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name of the key has to be the same in call site handle_errors_html
and in called subroutine that uses it, i.e. git_header_html.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the name of the script ($SCRIPT_NAME or $SCRIPT_FILENAME CGI
environment variable, or __FILE__ literal) ends with '.fcgi'
extension, run gitweb in FastCGI mode, as if it was run with
'--fastcgi' / '--fcgi' option.
This is intended for easy deploying gitweb using FastCGI
interface.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new subdirectory called 'static' in gitweb/, and move
all static files required by gitweb.cgi when running, which means
styles, images and Javascript code. This should make gitweb more
readable and easier to maintain.
Update t/gitweb-lib.sh to reflect this change.The install-gitweb
now also include moving of static files into 'static' subdirectory
in target directory: update Makefile, gitweb's INSTALL, README and
Makefile accordingly.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-caching-prep:
gitweb: Move generating page title to separate subroutine
gitweb: Add custom error handler using die_error
gitweb: Use nonlocal jump instead of 'exit' in die_error
gitweb: href(..., -path_info => 0|1)
Export more test-related variables when running external tests
Make git-format-patch (used by 'patch' and 'patches' views) use the
same rename detection options that git-diff and git-diff-tree (used
by 'commitdiff', 'blobdiff', etc.) use.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Former run() subroutine got renamed to run_request(). The new run()
subroutine can run multiple requests at once if run as FastCGI script.
To run gitweb as FastCGI script you must specify '--fastcgi' / '-f'
command line option to gitweb, otherwise it runs as an ordinary CGI
script.
[jn: cherry picked from 56d7d436644ab296155a697552ea1345f2701620
in http://utsl.gen.nz/gitweb/?p=gitweb which was originally based
on v264 (2326acfa95) by Kay Sievers;
updated to reflect current gitweb code]
TODO: update 'gitweb/README' and/or 'gitweb/INSTALL' files.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All code that is run per-connection (as opposed to those parts of gitweb
code that can be run once) is put into appropriate subroutines:
- evaluate_uri
- evaluate_gitweb_config
- evaluate_git_version (here only because $GIT can be set in config)
- check_loadavg (as soon as possible; $git_version must be defined)
- evaluate_query_params (counterpart to evaluate_path_info)
- evaluate_and_validate_params
- evaluate_git_dir (requires $project)
- configure_gitweb_features (@snapshot_fmts, $git_avatar)
- dispatch (includes setting default $action)
The difference is best viewed with '-w', '--ignore-all-space' option,
because of reindent caused by putting code in subroutines.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactoring (adding guess_file_syntax and run_highlighter
subroutines) is meant to make it easier in the future to add support
for other syntax highlighing solutions, or make it smarter by not
re-running `git cat-file` second time.
Instead of looping over list of regexps (keys of %highlight_type hash),
make use of the fact that choosing syntax is based either on full
basename (%highlight_basename), or on file extension (%highlight_ext).
Add some basic test of syntax highlighting (with 'highlight' as
prerequisite) to t/t9500-gitweb-standalone-no-errors.sh test.
While at it make git_blob Perl style prettier.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It requires the 'highlight' program to do all the heavy-lifting.
This is loosely based on Daniel Svensson's and Sham Chukoury's work in
gitweb-xmms2.git (it cannot be cherry-picked, as gitweb-xmms2 first forked
wildly, then not contributed back, and then went stale).
[jn: cherry picked from bc1ed6aafd9ee4937559535c66c8bddf1864bec6
in http://repo.or.cz/w/git/dscho.git, with a few changes]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Installing gitweb is now as easy as
# make gitwebdir=/var/www/cgi-bin gitweb-install ;# as root
The gitweb/INSTALL file was updated accordingly, to make use of this
new target.
Fix shell quoting, i.e. setting bindir_SQ etc., in gitweb/Makefile.
Those variables were not used previously.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When $projects_list points to a directory, and git_get_projects_list
scans this directory for repositories, there can be generated the
following warnings (for persistent services like mod_perl or plackup):
Variable "$project_maxdepth" may be unavailable at gitweb.cgi line 2443.
Variable "$projectroot" may be unavailable at gitweb.cgi line 2451.
Those are false positives; silence those warnings by explicitely
declaring $project_maxdepth and $projectroot with 'our', as global
variables, in anonymous subrotine passed to File::Find::find.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_page_title subroutine is currently used only in git_header_html.
Nevertheless refactoring title generation allowed to reduce indent
level.
It would be used in more than one callsite in the patch adding caching
activity indicator to gitweb.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the default message for errors (for fatalsToBrowser) to use
die_error() subroutine. This way errors (and explicitely calling 'die
MESSAGE') would generate 'Internal Server Error' error message.
Note that call to set_message is intentionally not put in BEGIN block;
we set error handler to use die_error() only after we are sure that we
can use it, after all needed variables are set.
Due to the fact that error handler set via set_message() subroutine
from CGI::Carp (in the fatalsToBrowser case) is called after HTTP
headers were already printed (with exception of MOD_PERL), gitweb
cannot return 'Status: 500 Internal Server Error'.
Thanks to the fact that die_error() no longer uses 'exit', errors
would be logged by CGI::Carp, independent on whether default error
handler is used, or handle_errors_html which uses die_error is used.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use 'goto DONE' in place of 'exit' to end request processing in
die_error() subroutine. While at it, do not end gitweb with 'exit'.
This would make it easier in the future to add support or improve
support for persistent environments such as FastCGI and mod_perl.
It would also make it easier to make use of die_error() as an error
handler (for fatalsToBrowser).
Perl 5 allows non-local jumps; the restriction is that you cannot jump
into a scope.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If named boolean option -path_info is passed to href() subroutine, it
would use its value to decide whether to generate path_info URL form.
If this option is not passed, href() queries 'pathinfo' feature to
check whether to generate path_info URL (if generating path_info link
is possible at all).
href(-replay=>1, -path_info=>0) is meant to be used to generate a key
for caching gitweb output; alternate solution would be to use freeze()
from Storable (core module) on %input_params hash (or its reference),
e.g.:
$key = freeze \%input_params;
or other serialization of %input_params.
While at it document extra options/flags to href().
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GITWEB_CSS and GITWEB_JS are meant to be "what URI should the installed
cgi script use to refer to the stylesheet and JavaScript", never "this
is the name of the file we are building". Don't use them to decide what
file to build minified versions in.
While we are at it, lose FILES that is used only for "clean" target in a
misguided way. "make clean" should try to remove all the potential
build artifacts regardless of a minor configuration change. Instead of
trying to remove only the build product "make clean" would have created
if it were run without "clean", explicitly list the three potential build
products for removal.
Tested-by: Mark Rada <marada@uwaterloo.co>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gitweb can be generated by the gitweb/gitweb.cgi target or the gitweb
target. Since the gitweb target is shorter, I think it would be better
to have new users be instructed to use it.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch updates gitweb/INSTALL to mention gitweb.js, including
JavaScript minification support.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will allow users to set a JavaScript/CSS minifier when/if they run
the autoconfigure script while building git.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build system added support minifying gitweb.js through a
JavaScript minifier, but most minifiers come with support for
minifying CSS files as well, so we should use it if we can.
This patch will add the same facilities to gitweb.css that
gitweb.js has for minification. That does not mean that they
will use the same minifier though, as it is not safe to assume
that all JavaScript minifiers will also minify CSS files.
This patch also adds the GITWEB_PROGRAMS variable to the Makefile
to keep a list of potential gitweb dependencies separate from
OTHER_PROGRAMS when we need to know just the gitweb dependencies.
Though the bandwidth savings will not be as dramatic as with
the JavaScript minifier, every byte saved is important.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fraser Tweedale
Jim Meyering
Junio C Hamano
Jakub Narebski
Kevin Cernekee
Ævar Arnfjörð Bjarmason
Adam Tkac
Sylvain Rabot
Jonathan Nieder
Giuseppe Bilotta
Christopher Wilson
Anders Kaseorg
Ralf Wildenhues
Alejandro R. Sedeño
Pavan Kumar Sunkara
Jay Soffian
Sam Vilain
Johannes Schindelin
Mark Rada