The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some functions from the refs module were still declared in cache.h.
Move them to refs.h.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the existing argv_array member instead of providing our own. This
way we don't have to initialize or clean it up explicitly.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid scanning strings twice, once with strchr() and then with
strlen(), by using strchrnul().
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rohit Mani <rohit.mani@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse issues 68 errors (two errors for each main() function) such
as the following:
SP git.c
git.c:510:5: error: too many arguments for function mingw_main
git.c:510:5: error: symbol 'mingw_main' redeclared with different type \
(originally declared at git.c:510) - different argument counts
The errors are caused by the 'main' macro used by the MinGW build
to provide a replacement main() function. The original main function
is effectively renamed to 'mingw_main' and is called from the new
main function. The replacement main is used to execute certain actions
common to all git programs on MinGW (e.g. ensure the standard I/O
streams are in binary mode).
In order to suppress the errors, we change the macro to include the
parameters in the declaration of the mingw_main function.
Unfortunately, this change provokes both sparse and gcc to complain
about 9 calls to mingw_main(), such as the following:
CC git.o
git.c: In function 'main':
git.c:510: warning: passing argument 2 of 'mingw_main' from \
incompatible pointer type
git.c:510: note: expected 'const char **' but argument is of \
type 'char **'
In order to suppress these warnings, since both of the main
functions need to be declared with the same prototype, we
change the declaration of the 9 main functions, thus:
int main(int argc, char **argv)
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In remote-test-svn, there is a parse_rev_note function to
parse lines of the form "Revision-number" from notes. If it
finds such a line and parses it, it returns 0, copying the
value into a "struct rev_note". If it finds an entry that is
garbled or out of range, it returns -1 to signal an error.
However, if it does not find any "Revision-number" line at
all, it returns success but does not put anything into the
rev_note. So upon a successful return, the rev_note may or
may not be initialized, and the caller has no way of
knowing.
gcc does not usually catch the use of the unitialized
variable because the conditional assignment happens in a
separate function from the point of use. However, when
compiling with -O3, gcc will inline parse_rev_note and
notice the problem.
We can fix it by returning "-1" when no note is found (so on
a zero return, we always found a valid value).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import mark files are stored outside the object database and are
therefore not fetched and can be lost somehow else. marks provide a
svn revision --> git sha1 mapping, while the notes that are attached
to each commit when it is imported provide a git sha1 --> svn revision
mapping.
If the marks file is not available or not plausible, regenerate it by
walking through the notes tree. , i.e. The plausibility check tests
if the highest revision in the marks file matches the revision of the
top ref. It doesn't ensure that the mark file is completely correct.
This could only be done with an effort equal to unconditional
regeneration.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Search for a note attached to the ref to update and read it's
'Revision-number:'-line. Start import from the next svn revision.
If there is no next revision in the svn repo, svnrdump terminates with
a message on stderr an non-zero return value. This looks a little
weird, but there is no other way to know whether there is a new
revision in the svn repo.
On the start of an incremental import, the parent of the first commit
in the fast-import stream is set to the branch name to update. All
following commits specify their parent by a mark number. Previous mark
files are currently not reused.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable import and export of a marks file by sending the appropriate
feature commands to fast-import before sending data.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For testing as well as for importing large, already available dumps,
it's useful to bypass svnrdump and replay the svndump from a file
directly.
Add support for file:// urls in the remote url, e.g.
svn::file:///path/to/dump
When the remote helper finds an url starting with file:// it tries to
open that file instead of invoking svnrdump.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable basic fetching from subversion repositories. When processing
remote URLs starting with testsvn::, git invokes this remote-helper.
It starts svnrdump to extract revisions from the subversion repository
in the 'dump file format', and converts them to a git-fast-import stream
using the functions of vcs-svn/.
Imported refs are created in a private namespace at
refs/svn/<remote-name>/master. The revision history is imported
linearly (no branch detection) and completely, i.e. from revision 0 to
HEAD.
The 'bidi-import' capability is used. The remote-helper expects data
from fast-import on its stdin. It buffers a batch of 'import' command
lines in a string_list before starting to process them.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Michael Haggerty
René Scharfe
Rohit Mani
Christian Couder
Ramsay Jones
Jeff King
Florian Achleitner