Code cleanup.
* rs/cocci:
use strbuf_add_unique_abbrev() for adding short hashes, part 3
remove unnecessary NULL check before free(3)
coccicheck: make transformation for strbuf_addf(sb, "...") more precise
use strbuf_add_unique_abbrev() for adding short hashes, part 2
use strbuf_addstr() instead of strbuf_addf() with "%s", part 2
gitignore: ignore output files of coccicheck make target
use strbuf_addstr() for adding constant strings to a strbuf, part 2
add coccicheck make target
contrib/coccinelle: fix semantic patch for oid_to_hex_r()
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter in most cases and a bit more efficient.
The changes here are not easily handled by a semantic patch because
they involve removing temporary variables and deconstructing format
strings for strbuf_addf().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter and a bit more efficient.
1eb47f167d already converted six cases,
this patch covers three more.
A semantic patch for Coccinelle is included for easier checking for
new cases that might be introduced in the future.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls. This is shorter and makes the intent clearer.
bc57b9c0cc already converted three cases,
this patch covers two more.
A semantic patch for Coccinelle is included for easier checking for
new cases that might be introduced in the future.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having a submodule whose ".git" repository is somehow corrupt
caused a few commands that recurse into submodules loop forever.
* jc/submodule-anchor-git-dir:
submodule: avoid auto-discovery in prepare_submodule_repo_env()
The function is used to set up the environment variable used in a
subprocess we spawn in a submodule directory. The callers set up a
child_process structure, find the working tree path of one submodule
and set .dir field to it, and then use start_command() API to spawn
the subprocess like "status", "fetch", etc.
When this happens, we expect that the ".git" (either a directory or
a gitfile that points at the real location) in the current working
directory of the subprocess MUST be the repository for the submodule.
If this ".git" thing is a corrupt repository, however, because
prepare_submodule_repo_env() unsets GIT_DIR and GIT_WORK_TREE, the
subprocess will see ".git", thinks it is not a repository, and
attempt to find one by going up, likely to end up in finding the
repository of the superproject. In some codepaths, this will cause
a command run with the "--recurse-submodules" option to recurse
forever.
By exporting GIT_DIR=.git, disable the auto-discovery logic in the
subprocess, which would instead stop it and report an error.
The test illustrates existing problems in a few callsites of this
function. Without this fix, "git fetch --recurse-submodules", "git
status" and "git diff" keep recursing forever.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct diff_filespec's sha1 member to use a struct object_id
called "oid" instead. The following Coccinelle semantic patch was used
to implement this, followed by the transformations in object_id.cocci:
@@
struct diff_filespec o;
@@
- o.sha1
+ o.oid.hash
@@
struct diff_filespec *p;
@@
- p->sha1
+ p->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two types of string_lists: those that own the
string memory, and those that don't. You can tell the
difference by the strdup_strings flag, and one should use
either STRING_LIST_INIT_DUP, or STRING_LIST_INIT_NODUP as an
initializer.
Historically, the normal all-zeros initialization has
corresponded to the NODUP case. Many sites use no
initializer at all, and that works as a shorthand for that
case. But for a reader of the code, it can be hard to
remember which is which. Let's be more explicit and actually
have each site declare which type it means to use.
This is a fairly mechanical conversion; I assumed each site
was correct as-is, and just switched them all to NODUP.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier addition of "sanitize_submodule_env" with 14111fc4 (git:
submodule honor -c credential.* from command line, 2016-02-29)
turned out to be a convoluted no-op; implement what it wanted to do
correctly, and stop filtering settings given via "git -c var=val".
* jk/submodule-c-credential:
submodule: stop sanitizing config options
submodule: use prepare_submodule_repo_env consistently
submodule--helper: move config-sanitizing to submodule.c
submodule: export sanitized GIT_CONFIG_PARAMETERS
t5550: break submodule config test into multiple sub-tests
t5550: fix typo in $HTTPD_URL
The point of having a whitelist of command-line config
options to pass to submodules was two-fold:
1. It prevented obvious nonsense like using core.worktree
for multiple repos.
2. It could prevent surprise when the user did not mean
for the options to leak to the submodules (e.g.,
http.sslverify=false).
For case 1, the answer is mostly "if it hurts, don't do
that". For case 2, we can note that any such example has a
matching inverted surprise (e.g., a user who meant
http.sslverify=true to apply everywhere, but it didn't).
So this whitelist is probably not giving us any benefit, and
is already creating a hassle as people propose things to put
on it. Let's just drop it entirely.
Note that we still need to keep a special code path for
"prepare the submodule environment", because we still have
to take care to pass through $GIT_CONFIG_PARAMETERS (and
block the rest of the repo-specific environment variables).
We can do this easily from within the submodule shell
script, which lets us drop the submodule--helper option
entirely (and it's OK to do so because as a "--" program, it
is entirely a private implementation detail).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before 14111fc (git: submodule honor -c credential.* from
command line, 2016-02-29), it was sufficient for code which
spawned a process in a submodule to just set the child
process's "env" field to "local_repo_env" to clear the
environment of any repo-specific variables.
That commit introduced a more complicated procedure, in
which we clear most variables but allow through sanitized
config. For C code, we used that procedure only for cloning,
but not for any of the programs spawned by submodule.c. As a
result, things like "git fetch --recurse-submodules" behave
differently than "git clone --recursive"; the former will
not pass through the sanitized config.
We can fix this by using prepare_submodule_repo_env()
everywhere in submodule.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions should be used by any code which spawns a
submodule process, which may happen in submodule.c (e.g.,
for spawning fetch). Let's move them there and make them
public so that submodule--helper can continue to use them.
Since they're now public, let's also provide a basic overview
of their intended use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By having the `submodule init` functionality in C, we can reference it
easier from other parts in the code in later patches. The code is split
up to have one function to initialize one submodule and a calling function
that takes care of the rest, such as argument handling and translating the
arguments to the paths of the submodules.
This is the first submodule subcommand that is fully converted to C
except for the usage string, so this is actually removing a call to
the `submodule--helper list` function, which is supposed to be used in
this transition. Instead we'll make a direct call to `module_list_compute`.
An explanation why we need to edit the prefixes in cmd_update in
git-submodule.sh in this patch:
By having no processing in the shell part, we need to convey the notion
of wt_prefix and prefix to the C parts, which former patches punted on
and did the processing of displaying path in the shell.
`wt_prefix` used to hold the path from the repository root to the current
directory, e.g. wt_prefix would be t/ if the user invoked the
`git submodule` command in ~/repo/t and ~repo is the GIT_DIR.
`prefix` used to hold the relative path from the repository root to the
operation, e.g. if you have recursive submodules, the shell script would
modify the `prefix` in each recursive step by adding the submodule path.
We will pass `wt_prefix` into the C helper via `git -C <dir>` as that
will setup git in the directory the user actually called git-submodule.sh
from. The `prefix` will be passed in via the `--prefix` option.
Having `prefix` and `wt_prefix` relative to the GIT_DIR of the
calling superproject is unfortunate with this patch as the C code doesn't
know about a possible recursion from a superproject via `submodule update
--init --recursive`.
To fix this, we change the meaning of `wt_prefix` to point to the current
project instead of the superproject and `prefix` to include any relative
paths issues in the superproject. That way `prefix` will become the leading
part for displaying paths and `wt_prefix` will be empty in recursive
calls for now.
The new notion of `wt_prefix` and `prefix` still allows us to reconstruct
the calling directory in the superproject by just traveling reverse of
`prefix`.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule" reports the paths of submodules the command
recurses into, but this was incorrect when the command was not run
from the root level of the superproject.
Any further comments? Otherwise will merge to 'next'.
* sb/submodule-path-misc-bugs: (600 commits)
t7407: make expectation as clear as possible
submodule update: test recursive path reporting from subdirectory
submodule update: align reporting path for custom command execution
submodule status: correct path handling in recursive submodules
submodule update --init: correct path handling in recursive submodules
submodule foreach: correct path display in recursive submodules
Git 2.8
Documentation: fix git-p4 AsciiDoc formatting
mingw: skip some tests in t9115 due to file name issues
t1300: fix the new --show-origin tests on Windows
t1300-repo-config: make it resilient to being run via 'sh -x'
config --show-origin: report paths with forward slashes
submodule: fix regression for deinit without submodules
l10n: pt_PT: Update and add new translations
l10n: ca.po: update translation
Git 2.8-rc4
Documentation: fix broken linkgit to git-config
Documentation: use ASCII quotation marks in git-p4
Revert "config.mak.uname: use clang for Mac OS X 10.6"
git-compat-util: st_add4: work around gcc 4.2.x compiler crash
...
Simplify the two callback functions that are triggered when the
child process terminates to avoid misuse of the child-process
structure that has already been cleaned up.
* sb/submodule-parallel-fetch:
run-command: do not pass child process data into callbacks
This allows to configure fetching and updating in parallel
without having the command line option.
This moved the responsibility to determine how many parallel processes
to start from builtin/fetch to submodule.c as we need a way to communicate
"The user did not specify the number of parallel processes in the command
line options" in the builtin fetch. The submodule code takes care of
the precedence (CLI > config > default).
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently submodule.<name>.update is only handled by git-submodule.sh.
C code will start to need to make use of that value as more of the
functionality of git-submodule.sh moves into library code in C.
Add the update field to 'struct submodule' and populate it so it can
be read as sm->update or from sm->update_command.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected way to pass data into the callback is to pass them via
the customizable callback pointer. The error reporting in
default_{start_failure, task_finished} is not user friendly enough, that
we want to encourage using the child data for such purposes.
Furthermore the struct child data is cleaned by the run-command API,
before we access them in the callbacks, leading to use-after-free
situations.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many codepaths forget to check return value from git_config_set();
the function is made to die() to make sure we do not proceed when
setting a configuration variable failed.
* ps/config-error:
config: rename git_config_set_or_die to git_config_set
config: rename git_config_set to git_config_set_gently
compat: die when unable to set core.precomposeunicode
sequencer: die on config error when saving replay opts
init-db: die on config errors when initializing empty repo
clone: die on config error in cmd_clone
remote: die on config error when manipulating remotes
remote: die on config error when setting/adding branches
remote: die on config error when setting URL
submodule--helper: die on config error when cloning module
submodule: die on config error when linking modules
branch: die on config error when editing branch description
branch: die on config error when unsetting upstream
branch: report errors in tracking branch setup
config: introduce set_or_die wrappers
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
If our size computation overflows size_t, we may allocate a
much smaller buffer than we expected and overflow it. It's
probably impossible to trigger an overflow in most of these
sites in practice, but it is easy enough convert their
additions and multiplications into overflow-checking
variants. This may be fixing real bugs, and it makes
auditing the code easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename git_config_set_or_die functions to git_config_set, leading
to the new default behavior of dying whenever a configuration
error occurs.
By now all callers that shall die on error have been transitioned
to the _or_die variants, thus making this patch a simple rename
of the functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The desired default behavior for `git_config_set` is to die
whenever an error occurs. Dying is the default for a lot of
internal functions when failures occur and is in this case the
right thing to do for most callers as otherwise we might run into
inconsistent repositories without noticing.
As some code may rely on the actual return values for
`git_config_set` we still require the ability to invoke these
functions without aborting. Rename the existing `git_config_set`
functions to `git_config_set_gently` to keep them available for
those callers.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to connect a submodule with its corresponding
repository in '.git/modules' we try to set the core.worktree
setting in the submodule, which may fail due to an error
encountered in `git_config_set_in_file`.
The function is used in the git-mv command when trying to move a
submodule to another location. We already die when renaming a
file fails but do not pay attention to the case where updating
the connection between submodule and its repository fails. As
this leaves the repository in an inconsistent state, as well,
abort the program by dying early and presenting the failure to
the user.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we enable parallel processing of submodules, this
only adds the possibility for it. So this change should not change
any user facing behavior.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Pushing submodule <foo>" progress output correctly goes to
stderr, but "Fetching submodule <foo>" is going to stdout by
mistake. Fix it to write to stderr.
Noticed while trying to implement a parallel submodule fetch. When
this particular output line went to a different file descriptor, it
was buffered separately, resulting in wrongly interleaved output if
we copied it to the terminal naively.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
We peek objects from submodule's object store by linking it to the
list of alternate object databases, but the code to do so forgot to
correctly initialize the list.
* jk/initialization-fix-to-add-submodule-odb:
add_submodule_odb: initialize alt_odb list earlier
The add_submodule_odb function tries to add a submodule's
object store as an "alternate". It needs the existing list
to be initialized (from the objects/info/alternates file)
for two reasons:
1. We look for duplicates with the existing alternate
stores, but obviously this doesn't work if we haven't
loaded any yet.
2. We link our new entry into the list by prepending it to
alt_odb_list. But we do _not_ modify alt_odb_tail.
This variable starts as NULL, and is a signal to the
alt_odb code that the list has not yet been
initialized.
We then call read_info_alternates on the submodule (to
recursively load its alternates), which will try to
append to that tail, assuming it has been initialized.
This causes us to segfault if it is NULL.
This rarely comes up in practice, because we will have
initialized the alt_odb any time we do an object lookup. So
you can trigger this only when:
- you try to access a submodule (e.g., a diff with
diff.submodule=log)
- the access happens before any other object has been
accessed (e.g., because the diff is between the working
tree and the index)
- the submodule contains an alternates file (so we try to
add an entry to the NULL alt_odb_tail)
To fix this, we just need to call prepare_alt_odb at the
start of the function (and if we have already initialized,
it is a noop).
Note that we can remove the prepare_alt_odb call from the
end. It is guaranteed to be a noop, since we will have
called it earlier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many allocations that is manually counted (correctly) that are
followed by strcpy/sprintf have been replaced with a less error
prone constructs such as xstrfmt.
Macintosh-specific breakage was noticed and corrected in this
reroll.
* jk/war-on-sprintf: (70 commits)
name-rev: use strip_suffix to avoid magic numbers
use strbuf_complete to conditionally append slash
fsck: use for_each_loose_file_in_objdir
Makefile: drop D_INO_IN_DIRENT build knob
fsck: drop inode-sorting code
convert strncpy to memcpy
notes: document length of fanout path with a constant
color: add color_set helper for copying raw colors
prefer memcpy to strcpy
help: clean up kfmclient munging
receive-pack: simplify keep_arg computation
avoid sprintf and strcpy with flex arrays
use alloc_ref rather than hand-allocating "struct ref"
color: add overflow checks for parsing colors
drop strcpy in favor of raw sha1_to_hex
use sha1_to_hex_r() instead of strcpy
daemon: use cld->env_array when re-spawning
stat_tracking_info: convert to argv_array
http-push: use an argv_array for setup_revisions
fetch-pack: use argv_array for index-pack / unpack-objects
...
When we are allocating a struct with a FLEX_ARRAY member, we
generally compute the size of the array and then sprintf or
strcpy into it. Normally we could improve a dynamic allocation
like this by using xstrfmt, but it doesn't work here; we
have to account for the size of the rest of the struct.
But we can improve things a bit by storing the length that
we use for the allocation, and then feeding it to xsnprintf
or memcpy, which makes it more obvious that we are not
writing more than the allocated number of bytes.
It would be nice if we had some kind of helper for
allocating generic flex arrays, but it doesn't work that
well:
- the call signature is a little bit unwieldy:
d = flex_struct(sizeof(*d), offsetof(d, path), fmt, ...);
You need offsetof here instead of just writing to the
end of the base size, because we don't know how the
struct is packed (partially this is because FLEX_ARRAY
might not be zero, though we can account for that; but
the size of the struct may actually be rounded up for
alignment, and we can't know that).
- some sites do clever things, like over-allocating because
they know they will write larger things into the buffer
later (e.g., struct packed_git here).
So we're better off to just write out each allocation (or
add type-specific helpers, though many of these are one-off
allocations anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions which directly operate submodule's object database do not
handle the case when the submodule is linked worktree (which are
introduced in c7b3a3d2fe). Instead of fixing the path calculation use
already existing strbuf_git_path_submodule() function without changing
overall behaviour. Then it will be possible to modify only that function
whenever we need to change real location of submodule's repository
content.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent reimplementation of "git am" changed the format of state
files kept in $GIT_DIR/rebase-apply/ without meaning to do so,
primarily because write_file() API was cumbersome to use and it was
easy to mistakenly make text files with incomplete lines. Update
write_file() interface to make it harder to misuse.
* jc/am-state-fix:
write_file(): drop caller-supplied LF from calls to create a one-liner file
write_file_v(): do not leave incomplete line at the end
write_file(): drop "fatal" parameter
builtin/am: make sure state files are text
builtin/am: introduce write_state_*() helper functions
The gitmodules API accessed from the C code learned to cache stuff
lazily.
* hv/submodule-config:
submodule: allow erroneous values for the fetchRecurseSubmodules option
submodule: use new config API for worktree configurations
submodule: extract functions for config set and lookup
submodule: implement a config API for lookup of .gitmodules values
All of the callsites covered by this change call write_file() or
write_file_gently() to create a one-liner file. Drop the caller
supplied LF and let these callees to append it as necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All callers except three passed 1 for the "fatal" parameter to ask
this function to die upon error, but to a casual reader of the code,
it was not all obvious what that 1 meant. Instead, split the
function into two based on a common write_file_v() that takes the
flag, introduce write_file_gently() as a new way to attempt creating
a file without dying on error, and make three callers to call it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should not die when reading the submodule config cache since the
user might not be able to get out of that situation when the
configuration is part of the history.
We should handle this condition later when the value is about to be
used.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We remove the extracted functions and directly parse into and read out
of the cache. This allows us to have one unified way of accessing
submodule configuration values specific to single submodules. Regardless
whether we need to access a configuration from history or from the
worktree.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one step towards using the new configuration API. We just
extract these functions to make replacing the actual code easier.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a superproject some commands need to interact with submodules. They
need to query values from the .gitmodules file either from the worktree
of from certain revisions. At the moment this is quite hard since a
caller would need to read the .gitmodules file from the history and then
parse the values. We want to provide an API for this so we have one
place to get values from .gitmodules from any revision (including the
worktree).
The API is realized as a cache which allows us to lazily read
.gitmodules configurations by commit into a runtime cache which can then
be used to easily lookup values from it. Currently only the values for
path or name are stored but it can be extended for any value needed.
It is expected that .gitmodules files do not change often between
commits. Thats why we lookup the .gitmodules sha1 from a commit and then
either lookup an already parsed configuration or parse and cache an
unknown one for each sha1. The cache is lazily build on demand for each
requested commit.
This cache can be used for all purposes which need knowledge about
submodule configurations. Example use cases are:
* Recursive submodule checkout needs to lookup a submodule name from
its path when a submodule first appears. This needs be done before
this configuration exists in the worktree.
* The implementation of submodule support for 'git archive' needs to
lookup the submodule name to generate the archive when given a
revision that is not checked out.
* 'git fetch' when given the --recurse-submodules=on-demand option (or
configuration) needs to lookup submodule names by path from the
database rather than reading from the worktree. For new submodule it
needs to lookup the name from its path to allow cloning new
submodules into the .git folder so they can be checked out without
any network interaction when the user does a checkout of that
revision.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
for_each_ref() callback functions were taught to name the objects
not with "unsigned char sha1[20]" but with "struct object_id".
* bc/object-id: (56 commits)
struct ref_lock: convert old_sha1 member to object_id
warn_if_dangling_symref(): convert local variable "junk" to object_id
each_ref_fn_adapter(): remove adapter
rev_list_insert_ref(): remove unneeded arguments
rev_list_insert_ref_oid(): new function, taking an object_oid
mark_complete(): remove unneeded arguments
mark_complete_oid(): new function, taking an object_oid
clear_marks(): rewrite to take an object_id argument
mark_complete(): rewrite to take an object_id argument
send_ref(): convert local variable "peeled" to object_id
upload-pack: rewrite functions to take object_id arguments
find_symref(): convert local variable "unused" to object_id
find_symref(): rewrite to take an object_id argument
write_one_ref(): rewrite to take an object_id argument
write_refs_to_temp_dir(): convert local variable sha1 to object_id
submodule: rewrite to take an object_id argument
shallow: rewrite functions to take object_id arguments
handle_one_ref(): rewrite to take an object_id argument
add_info_ref(): rewrite to take an object_id argument
handle_one_reflog(): rewrite to take an object_id argument
...
Code clean-up.
* rs/janitorial:
dir: remove unused variable sb
clean: remove unused variable buf
use file_exists() to check if a file exists in the worktree
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change typedef each_ref_fn to take a "const struct object_id *oid"
parameter instead of "const unsigned char *sha1".
To aid this transition, implement an adapter that can be used to wrap
old-style functions matching the old typedef, which is now called
"each_ref_sha1_fn"), and make such functions callable via the new
interface. This requires the old function and its cb_data to be
wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be
used as the cb_data for an adapter function, each_ref_fn_adapter().
This is an enormous diff, but most of it consists of simple,
mechanical changes to the sites that call any of the "for_each_ref"
family of functions. Subsequent to this change, the call sites can be
rewritten one by one to use the new interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call file_exists() instead of open-coding it. That's shorter, simpler
and the intent becomes clearer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
René Scharfe
brian m. carlson
Jeff King
Stefan Beller
Patrick Steinhardt
Jonathan Nieder
Max Kirillov
Heiko Voigt
Michael Haggerty