Workaround we have for versions of PCRE2 before their version 10.36
were in effect only for their versions newer than 10.36 by mistake,
which has been corrected.
* rs/pcre-invalid-utf8-fix-fix:
grep: fix triggering PCRE2_NO_START_OPTIMIZE workaround
Some code clean-up in the "git grep" machinery.
* ab/grep-patterntype:
grep: simplify config parsing and option parsing
grep.c: do "if (bool && memchr())" not "if (memchr() && bool)"
grep.h: make "grep_opt.pattern_type_option" use its enum
grep API: call grep_config() after grep_init()
grep.c: don't pass along NULL callback value
built-ins: trust the "prefix" from run_builtin()
grep tests: add missing "grep.patternType" config tests
grep tests: create a helper function for "BRE" or "ERE"
log tests: check if grep_config() is called by "log"-like cmds
grep.h: remove unused "regex_t regexp" from grep_opt
PCRE2 bug 2642 was fixed in version 10.36. Our 95ca1f987e (grep/pcre2:
better support invalid UTF-8 haystacks, 2021-01-24) worked around it on
older versions by setting the flag PCRE2_NO_START_OPTIMIZE. 797c359978
(grep/pcre2: use compile-time PCREv2 version test, 2021-02-18) switched
it around to set the flag on 10.36 and higher instead, while it claimed
to use "the same test done at compile-time".
Switch the condition back to apply the workaround on PCRE2 versions
_before_ 10.36.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the parsing of "grep.patternType" and
"grep.extendedRegexp". This changes no behavior, but gets rid of
complex parsing logic that isn't needed anymore.
When "grep.patternType" was introduced in 84befcd0a4 (grep: add a
grep.patternType configuration setting, 2012-08-03) we promised that:
1. You can set "grep.patternType", and "[setting it to] 'default'
will return to the default matching behavior".
In that context "the default" meant whatever the configuration
system specified before that change, i.e. via grep.extendedRegexp.
2. We'd support the existing "grep.extendedRegexp" option, but ignore
it when the new "grep.patternType" option is set. We said we'd
only ignore the older "grep.extendedRegexp" option "when the
`grep.patternType` option is set to a value other than
'default'".
In a preceding commit we changed grep_config() to be called after
grep_init(), which means that much of the complexity here can go
away.
As before both "grep.patternType" and "grep.extendedRegexp" are
last-one-wins variable, with "grep.extendedRegexp" yielding to
"grep.patternType", except when "grep.patternType=default".
Note that as the previously added tests indicate this cannot be done
on-the-fly as we see the config variables, without introducing more
state keeping. I.e. if we see:
-c grep.extendedRegexp=false
-c grep.patternType=default
-c extendedRegexp=true
We need to select ERE, since grep.patternType=default unselects that
variable, which normally has higher precedence, but we also need to
select BRE in cases of:
-c grep.extendedRegexp=true \
-c grep.extendedRegexp=false
Which would not be the case for this, which select ERE:
-c grep.patternType=extended \
-c grep.extendedRegexp=false
Therefore we cannot do this on-the-fly in grep_config without also
introducing tracking variables for not only the pattern type, but what
the source of that pattern type was.
So we need to decide on the pattern after our config was fully
parsed. Let's do that by deferring the decision on the pattern type
until it's time to compile it in compile_regexp().
By that time we've not only parsed the config, but also handled the
command-line options. Those will set "opt.pattern_type_option" (*not*
"opt.extended_regexp_option"!).
At that point all we need to do is see if "grep.patternType" was
UNSPECIFIED in the end (including an explicit "=default"), if so we'll
use the "grep.extendedRegexp" configuration, if any.
See my 07a3d41173 (grep: remove regflags from the public grep_opt
API, 2017-06-29) for addition of the two comments being removed here,
i.e. the complexity noted in that commit is now going away.
1. https://lore.kernel.org/git/patch-v8-09.10-c211bb0c69d-20220118T155211Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code in compile_regexp() to check the cheaper boolean
"!opt->pcre2" condition before the "memchr()" search.
This doesn't noticeably optimize anything, but makes the code more
obvious and conventional. The line wrapping being added here also
makes a subsequent commit smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grep_init() function used the odd pattern of initializing the
passed-in "struct grep_opt" with a statically defined "grep_defaults"
struct, which would be modified in-place when we invoked
grep_config().
So we effectively (b) initialized config, (a) then defaults, (c)
followed by user options. Usually those are ordered as "a", "b" and
"c" instead.
As the comments being removed here show the previous behavior needed
to be carefully explained as we'd potentially share the populated
configuration among different instances of grep_init(). In practice we
didn't do that, but now that it can't be a concern anymore let's
remove those comments.
This does not change the behavior of any of the configuration
variables or options. That would have been the case if we didn't move
around the grep_config() call in "builtin/log.c". But now that we call
"grep_config" after "git_log_config" and "git_format_config" we'll
need to pass in the already initialized "struct grep_opt *".
See 6ba9bb76e0 (grep: copy struct in one fell swoop, 2020-11-29) and
7687a0541e (grep: move the configuration parsing logic to grep.[ch],
2012-10-09) for the commits that added the comments.
The memcpy() pattern here will be optimized away and follows the
convention of other *_init() functions. See 5726a6b401 (*.c *_init():
define in terms of corresponding *_INIT macro, 2021-07-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code in "builtin/grep.c" and "builtin/ls-tree.c" to trust the
"prefix" passed from "run_builtin()". The "prefix" we get from setup.c
is either going to be NULL or a string of length >0, never "".
So we can drop the "prefix && *prefix" checks added for
"builtin/grep.c" in 0d042fecf2 (git-grep: show pathnames relative to
the current directory, 2006-08-11), and for "builtin/ls-tree.c" in
a69dd585fc (ls-tree: chomp leading directories when run from a
subdirectory, 2005-12-23).
As seen in code in revision.c that was added in cd676a5136 (diff
--relative: output paths as relative to the current subdirectory,
2008-02-12) we already have existing code that does away with this
assertion.
This makes it easier to reason about a subsequent change to the
"prefix_length" code in grep.c in a subsequent commit, and since we're
going to the trouble of doing that let's leave behind an assert() to
promise this to any future callers.
For "builtin/grep.c" it would be painful to pass the "prefix" down the
callchain of:
cmd_grep -> grep_tree -> grep_submodule -> grep_cache -> grep_oid ->
grep_source_name
So for the code that needs it in grep_source_name() let's add a
"grep_prefix" variable similar to the existing "ls_tree_prefix".
While at it let's move the code in cmd_ls_tree() around so that we
assign to the "ls_tree_prefix" right after declaring the variables,
and stop assigning to "prefix". We only subsequently used that
variable later in the function after clobbering it. Let's just use our
own "grep_prefix" instead.
Let's also add an assert() in git.c, so that we'll make this promise
about the "prefix" to any current and future callers, as well as to
any readers of the code.
Code history:
* The strlen() in "grep.c" hasn't been used since 493b7a08d8 (grep:
accept relative paths outside current working directory, 2009-09-05).
When that code was added in 0d042fecf2 (git-grep: show pathnames
relative to the current directory, 2006-08-11) we used the length.
But since 493b7a08d8 we haven't used it for anything except a
boolean check that we could have done on the "prefix" member
itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* rs/grep-expr-cleanup:
grep: use grep_and_expr() in compile_pattern_and()
grep: extract grep_binexp() from grep_or_expr()
grep: use grep_not_expr() in compile_pattern_not()
grep: use grep_or_expr() in compile_pattern_or()
The color palette used by "git grep" has been updated to match that
of GNU grep.
* lh/use-gnu-color-in-grep:
grep: align default colors with GNU grep ones
In a similar spirit as a previous commit, use the new `grep_and_expr()`
to construct the AND node in `compile_pattern_and()`.
Unlike the aforementioned previous commit, this is not about code
duplication, since this is the only spot in grep.c where an AND node is
constructed. Rather, this is about visual consistency with the other
`compile_pattern_xyz()` functions.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When constructing an OR node, the grep.c code uses `grep_or_expr()` to
make a node, assign its kind, and set its left and right children. The
same is not done for AND nodes.
Prepare to introduce a new `grep_and_expr()` function which will share
code with the existing implementation of `grep_or_expr()` by introducing
a new function which compiles either kind of binary expression, and
reimplement `grep_or_expr()` in terms of it.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the definition of grep_not_expr() up and use this function in
compile_pattern_not() to simplify the code and reduce duplication.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the definition of grep_or_expr() up and use this function in
compile_pattern_or() to reduce code duplication.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep --perl-regexp" failed to match UTF-8 characters with
wildcard when the pattern consists only of ASCII letters, which has
been corrected.
* rs/pcre2-utf:
grep/pcre2: factor out literal variable
grep/pcre2: use PCRE2_UTF even with ASCII patterns
git-grep shares a lot of options with the standard grep tool.
Like GNU grep, it has coloring options to highlight the matching text.
And like it, it has options to customize the various colored parts.
This patch updates the default git-grep colors to make them match the
GNU grep default ones [1].
It was possible to get the same result by setting the various `color.grep.<slot>`
options, but this patch makes `git grep --color` share the same color scheme as
`grep --color` by default without any user configuration.
[1] https://www.man7.org/linux/man-pages/man1/grep.1.html#ENVIRONMENT
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patterns that contain no wildcards and don't have to be case-folded are
literal. Give this condition a name to increase the readability of the
boolean expression for enabling the option PCRE2_UTF.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
compile_pcre2_pattern() currently uses the option PCRE2_UTF only for
patterns with non-ASCII characters. Patterns with ASCII wildcards can
match non-ASCII strings, though. Without that option PCRE2 mishandles
UTF-8 input, though -- it matches parts of multi-byte characters. Fix
that by using PCRE2_UTF even for ASCII-only patterns.
This is a remake of the reverted ae39ba431a (grep/pcre2: fix an edge
case concerning ascii patterns and UTF-8 data, 2021-10-15). The change
to the condition and the test are simplified and more targeted.
Original-patch-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option --invert-grep is documented to filter out commits whose
messages match the --grep filters. However, it also affects the
header matches (--author, --committer), which is not intended.
Move the handling of that option to grep.c, as only the code there can
distinguish between matches in the header from those in the message
body. If --invert-grep is given then enable extended expressions (not
the regex type, we just need git grep's --not to work), negate the body
patterns and check if any of them match by piggy-backing on the
collect_hits mechanism of grep_source_1().
Collecting the matches in struct grep_opt is a bit iffy, but with
"last_shown" we have a precedent for writing state information to that
struct.
Reported-by: Dotan Cohen <dotancohen@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit ae39ba431a, as it
breaks "grep" when looking for a string in non UTF-8 haystack, when
linked with certain versions of PCREv2 library.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we attempt to grep non-ascii log message text with an ascii pattern, we
run into the following issue:
$ git log --color --author='.var.*Bjar' -1 origin/master | grep ^Author
grep: (standard input): binary file matches
So, to fix this teach the grep code to use PCRE2_UTF, as long as the log
output is encoded in UTF-8.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These changes are made in preparation of, the colorization support for the
"git log" subcommands that, rely on regex functionality (i.e. "--author",
"--committer" and "--grep"). These changes are necessary primarily because
match_one_pattern() expects header lines to be prefixed, however, in
pretty, the prefixes are stripped from the lines because the name-email
pairs need to go through additional parsing, before they can be printed and
because next_match() doesn't handle the case of
"ctx == GREP_CONTEXT_HEAD" at all. So, teach next_match() how to handle the
new case and move match_one_pattern()'s core logic to
headerless_match_one_pattern() while preserving match_one_pattern()'s uses
that depend on the additional processing.
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our grep_buffer() function takes a non-const buffer, which is confusing:
we don't take ownership of nor write to the buffer.
This mostly comes from the fact that the underlying grep_source struct
in which we store the buffer uses non-const pointer. The memory pointed
to by the struct is sometimes owned by us (for FILE or OID sources), and
sometimes not (for BUF sources).
Let's store it as const, which lets us err on the side of caution (i.e.,
the compiler will warn us if any of our code writes to or tries to free
it).
As a result, we must annotate the one place where we do free it by
casting away the constness. But that's a small price to pay for the
extra safety and clarity elsewhere (and indeed, it already had a comment
explaining why GREP_SOURCE_BUF _didn't_ free it).
And then we can mark grep_buffer() as taking a const buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're grepping in a buffer, we don't need to modify it. So we can
take "const char *" buffers, rather than "char *". This can avoid some
awkward casts in our callers, and make our expectations more clear (we
will not take ownership of the memory, nor will we ever write to it).
These spots don't all necessarily have to be converted at the same time,
but some of them are dependent on others, because we pass
pointers-to-pointers in a few cases. And none of this should change any
behavior, since we're just adding "const" qualifiers (and likewise, the
compiler will let us know if we missed any spots). So it's relatively
low-risk to just do this all at once.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We find the end of each matching line of a buffer, and then temporarily
write a NUL to turn it into a regular C string. But we don't need to do
so, because the only thing we do in the interim is pass the line and its
length (via an "eol" pointer) to match_line(). And that function should
only look at the bytes we passed it, whether it has a terminating NUL or
not.
We can drop this temporary write in order to simplify the code and make
it easier to use const buffers in more of grep.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When showing lines via grep (or looking for funcnames), we call
show_line() on a multi-line buffer. It finds the end of line and marks
it with a NUL. However, we don't need to do so, as the resulting line is
only used along with its "eol" marker:
- we pass both to next_match(), which takes care to look at only the
bytes we specified
- we pass the line to output_color() without its matching eol marker.
However, we do use the "match" struct we got from next_match() to
tell it how many bytes to look at (which can never exceed the string
we passed it).
So we can stop setting and restoring this NUL marker. That makes the
code simpler, and will allow us to take a const buffer in a future
patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When grepping for headers in commit objects, we receive individual
lines (e.g., "author Name <email> 1234 -0000"), and then strip off the
timestamp to do our match. We do so by writing a NUL byte over the
whitespace separator, and then remembering to restore it later.
We had to do it this way when this was added back in a4d7d2c6db (log
--author/--committer: really match only with name part, 2008-09-04),
because we fed the result directly to regexec(), which expects a
NUL-terminated string. But since b7d36ffca0 (regex: use regexec_buf(),
2016-09-21), we have a function which can match part of a buffer.
So instead of modifying the string, we can instead just move the "eol"
pointer, and the rest of the code will do the right thing. This will let
further patches mark more buffers as "const".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Record the repository whenever an OID grep source is created, and teach
the worker threads to explicitly provide the repository when accessing
objects.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep_source_init() can create "struct grep_source" objects and,
depending on the value of the type passed, some void-pointer parameters have
different meanings. Because one of these types (GREP_SOURCE_OID) will
require an additional parameter in a subsequent patch, take the
opportunity to increase clarity and type safety by replacing this
function with individual functions for each type.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep --and -e foo" ought to have been diagnosed as an error
but instead segfaulted, which has been corrected.
* rs/grep-parser-fix:
grep: report missing left operand of --and
Git grep allows combining two patterns with --and. It checks and
reports if the second pattern is missing when compiling the expression.
A missing first pattern, however, is only reported later at match time.
Thus no error is returned if no matching is done, e.g. because no file
matches the also given pathspec.
When that happens we get an expression tree with an GREP_NODE_AND node
and a NULL pointer to the missing left child. free_pattern_expr()
tries to dereference it during the cleanup at the end, which results
in a segmentation fault.
Fix this by verifying the presence of the left operand at expression
compilation time.
Reported-by: Matthew Hughes <matthewhughes934@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates to memory allocation code around the use of pcre2 library.
* ab/grep-pcre2-allocfix:
grep/pcre2: move definitions of pcre2_{malloc,free}
grep/pcre2: move back to thread-only PCREv2 structures
grep/pcre2: actually make pcre2 use custom allocator
grep/pcre2: use pcre2_maketables_free() function
grep/pcre2: use compile-time PCREv2 version test
grep/pcre2: add GREP_PCRE2_DEBUG_MALLOC debug mode
grep/pcre2: prepare to add debugging to pcre2_malloc()
grep/pcre2: correct reference to grep_init() in comment
grep/pcre2: drop needless assignment to NULL
grep/pcre2: drop needless assignment + assert() on opt->pcre2
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the definitions of the pcre2_{malloc,free} functions above the
compile_pcre2_pattern() function they're used in.
Before the preceding commit they used to be needed earlier, but now we
can move them to be adjacent to the other PCREv2 functions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the setup of the "pcre2_general_context" to happen per-thread
in compile_pcre2_pattern() instead of in grep_init().
This change brings it in line with how the rest of the pcre2_* members
in the grep_pat structure are set up.
As noted in the preceding commit the approach 513f2b0bbd (grep: make
PCRE2 aware of custom allocator, 2019-10-16) took to allocate the
pcre2_general_context seems to have been initially based on a
misunderstanding of how PCREv2 memory allocation works.
The approach of creating a global context in grep_init() is just added
complexity for almost zero gain. On my system it's 24 bytes saved
per-thread. For comparison PCREv2 will then go on to allocate at least
a kilobyte for its own thread-local state.
As noted in 6d423dd542 (grep: don't redundantly compile throwaway
patterns under threading, 2017-05-25) the grep code is intentionally
not trying to micro-optimize allocations by e.g. sharing some PCREv2
structures globally, while making others thread-local.
So let's remove this special case and make all of them thread-local
again for simplicity. With this change we could move the
pcre2_{malloc,free} functions around to live closer to their current
use. I'm not doing that here to keep this change small, that cleanup
will be done in a follow-up commit.
See also the discussion in 94da9193a6 (grep: add support for PCRE v2,
2017-06-01) about thread safety, and Johannes's comments[1] to the
effect that we should be doing what this patch is doing.
1. https://lore.kernel.org/git/nycvar.QRO.7.76.6.1908052120302.46@tvgsbejvaqbjf.bet/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue work started in 513f2b0bbd (grep: make PCRE2 aware of custom
allocator, 2019-10-16) and make PCREv2 use our pcre2_{malloc,free}().
functions for allocation. We'll now use it for all PCREv2 allocations.
The reason 513f2b0bbd worked as a bugfix for the USE_NED_ALLOCATOR
issue is because it targeted the allocation freed via free(), as
opposed to by a pcre2_*free() function. I.e. the pcre2_maketables()
and pcre2_maketables_free() pair.
For most of the rest we continued allocating with stock malloc()
inside PCREv2 itself, but didn't segfault because we'd use its
corresponding free().
In a preceding commit of mine I changed the free() to
pcre2_maketables_free() on versions of PCREv2 10.34 and newer. So as
far as fixing the segfault goes we could revert 513f2b0bbd. But then
we wouldn't use the desired allocator, let's just use it instead.
Before this patch we'd on e.g.:
grep --threads=1 -iP æ.*var.*xyz
Only use pcre2_{malloc,free}() for 2 malloc() calls and 2
corresponding free() calls. Now it's 12 calls to each. This can be
observed with the GREP_PCRE2_DEBUG_MALLOC debug mode.
Reading the history of how this bug got introduced it wasn't present
in Johannes's original patch[1] to fix the issue.
My reading of that thread is that the approach the follow-up patches
to Johannes's original pursued were based on misunderstanding of how
the PCREv2 API works. In particular this part of [2]:
"most of the time (like when using UTF-8) the chartable (and
therefore the global context) is not needed (even when using
alternate allocators)"
That's simply not how PCREv2 memory allocation works. It's easy to see
how the misunderstanding came about. It's because (as noted above) the
issue was noticed because of our use of free() in our own grep.c for
freeing the memory allocated by pcre2_maketables().
Thus the misunderstanding that PCREv2's compile context is something
only needed for pcre2_maketables(), and e.g. an aborted earlier
attempt[3] to only set it up when we ourselves called
pcre2_maketables().
That's not what PCREv2's compile context is. To quote PCREv2's
documentation:
"This context just contains pointers to (and data for) external
memory management functions that are called from several places in
the PCRE2 library."
Thus the failed attempts to go down the route of only creating the
general context in cases where we ourselves call pcre2_maketables(),
before finally settling on the approach 513f2b0bbd took of always
creating it, but then mostly not using it.
Instead we should always create it, and then pass the general context
to those functions that accept it, so that they'll consistently use
our preferred memory allocation functions.
1. https://lore.kernel.org/git/3397e6797f872aedd18c6d795f4976e1c579514b.1565005867.git.gitgitgadget@gmail.com/
2. https://lore.kernel.org/git/CAPUEsphMh_ZqcH3M7PXC9jHTfEdQN3mhTAK2JDkdvKBp53YBoA@mail.gmail.com/
3. https://lore.kernel.org/git/20190806085014.47776-3-carenas@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make use of the pcre2_maketables_free() function to free the memory
allocated by pcre2_maketables().
At first sight it's strange that 10da030ab7 (grep: avoid leak of
chartables in PCRE2, 2019-10-16) which added the free() call here
doesn't make use of the pcre2_free() the author introduced in the
preceding commit in 513f2b0bbd (grep: make PCRE2 aware of custom
allocator, 2019-10-16).
The reason is that at the time the function didn't exist. It was first
introduced in PCREv2 version 10.34, released on 2019-11-21.
Let's make use of it behind a macro. I don't think this matters for
anything to do with custom allocators, but it makes our use of PCREv2
more discoverable.
At some distant point in the future we'll be able to drop the version
guard, as nobody will be running a version older than 10.34.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a use of pcre2_config(PCRE2_CONFIG_VERSION, ...) which I added
in 95ca1f987e (grep/pcre2: better support invalid UTF-8 haystacks,
2021-01-24) with the same test done at compile-time.
It might be cuter to do this at runtime since we don't have to do the
"major >= 11 || (major >= 10 && ...)" test. But in the next commit
we'll add another version comparison that absolutely needs to be done
at compile-time, so we're better of being consistent across the board.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add optional printing of PCREv2 allocations to stderr for a developer
who manually changes the GREP_PCRE2_DEBUG_MALLOC definition to "1".
You need to manually change the definition in the source file similar
to the DEBUG_MAILMAP, there's no Makefile knob for this.
This will be referenced a subsequent commit, and is generally useful
to manually see what's going on with PCREv2 allocations while working
on that code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change pcre2_malloc() in a way that'll make it easier for a debugging
fprintf() to spew out the allocated pointer.
This doesn't introduce any functional change, it just makes a
subsequent commit's diff easier to read. Changes code added in
513f2b0bbd (grep: make PCRE2 aware of custom allocator, 2019-10-16).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct a comment added in 513f2b0bbd (grep: make PCRE2 aware of
custom allocator, 2019-10-16). This comment was never correct in
git.git, but was consistent with an older version of the patch[1].
1. https://lore.kernel.org/git/20190806163658.66932-3-carenas@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a redundant assignment of pcre2_compile_context dating back to
my 94da9193a6 (grep: add support for PCRE v2, 2017-06-01).
In create_grep_pat() we xcalloc() the "grep_pat" struct, so there's no
need to NULL out individual members here.
I think this was probably something left over from an earlier
development version of mine.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop an assignment added in b65abcafc7 (grep: use PCRE v2 for
optimized fixed-string search, 2019-07-01) and the overly cautious
assert() I added in 94da9193a6 (grep: add support for PCRE v2,
2017-06-01).
There was never a good reason for this, it's just a relic from when I
initially wrote the PCREv2 support. We're not going to have confusion
about compile_pcre2_pattern() being called when it shouldn't just
because we forgot to cargo-cult this opt->pcre2 option.
Furthermore the "struct grep_opt" is (mostly) used for the options the
user supplied, let's avoid the pattern of needlessly assigning to it.
With my recent removal of the PCREv1 backend in 7599730b7e (Remove
support for v1 of the PCRE library, 2021-01-24) there's even less
confusion around what we call where in these codepaths, which is one
more reason to remove this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update support for invalid UTF-8 in PCRE2.
* ab/grep-pcre-invalid-utf8:
grep/pcre2: better support invalid UTF-8 haystacks
grep/pcre2 tests: don't rely on invalid UTF-8 data test
The support for deprecated PCRE1 library has been dropped.
* ab/retire-pcre1:
Remove support for v1 of the PCRE library
config.mak.uname: remove redundant NO_LIBPCRE1_JIT flag
Remove the hidden "grep --debug" and "log --grep-debug" options added
in 17bf35a3c7 (grep: teach --debug option to dump the parse tree,
2012-09-13).
At the time these options seem to have been intended to go along with
a documentation discussion and to help the author of relevant tests to
perform ad-hoc debugging on them[1].
Reasons to want this gone:
1. They were never documented, and the only (rather trivial) use of
them in our own codebase for testing is something I removed back
in e01b4dab01 (grep: change non-ASCII -i test to stop using
--debug, 2017-05-20).
2. Googling around doesn't show any in-the-wild uses I could dig up,
and on the Git ML the only mentions after the original discussion
seem to have been when they came up in unrelated diff contexts, or
that test commit of mine.
3. An exception to that is c581e4a749 (grep: under --debug, show
whether PCRE JIT is enabled, 2019-08-18) where we added the
ability to dump out when PCREv2 has the JIT in effect.
The combination of that and my earlier b65abcafc7 (grep: use PCRE
v2 for optimized fixed-string search, 2019-07-01) means Git prints
this out in its most common in-the-wild configuration:
$ git log --grep-debug --grep=foo --grep=bar --grep=baz --all-match
pcre2_jit_on=1
pcre2_jit_on=1
pcre2_jit_on=1
[all-match]
(or
pattern_body<body>foo
(or
pattern_body<body>bar
pattern_body<body>baz
)
)
$ git grep --debug \( -e foo --and -e bar \) --or -e baz
pcre2_jit_on=1
pcre2_jit_on=1
pcre2_jit_on=1
(or
(and
patternfoo
patternbar
)
patternbaz
)
I.e. for each pattern we're considering for the and/or/--all-match
etc. debugging we'll now diligently spew out another identical line
saying whether the PCREv2 JIT is on or not.
I think that nobody's complained about that rather glaringly obviously
bad output says something about how much this is used, i.e. it's
not.
The need for this debugging aid for the composed grep/log patterns
seems to have passed, and the desire to dump the JIT config seems to
have been another one-off around the time we had JIT-related issues on
the PCREv2 codepath. That the original author of this debugging
facility seemingly hasn't noticed the bad output since then[2] is
probably some indicator.
1. https://lore.kernel.org/git/cover.1347615361.git.git@drmicha.warpmail.net/
2. https://lore.kernel.org/git/xmqqk1b8x0ac.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the support for invalid UTF-8 haystacks given a non-ASCII
needle when using the PCREv2 backend.
This is a more complete fix for a bug I started to fix in
870eea8166 (grep: do not enter PCRE2_UTF mode on fixed matching,
2019-07-26), now that PCREv2 has the PCRE2_MATCH_INVALID_UTF mode we
can make use of it.
This fixes the sort of case described in 8a5999838e (grep: stess test
PCRE v2 on invalid UTF-8 data, 2019-07-26), i.e.:
- The subject string is non-ASCII (e.g. "ævar")
- We're under a is_utf8_locale(), e.g. "en_US.UTF-8", not "C"
- We are using --ignore-case, or we're a non-fixed pattern
If those conditions were satisfied and we matched found non-valid
UTF-8 data PCREv2 might bark on it, in practice this only happened
under the JIT backend (turned on by default on most platforms).
Ultimately this fixes a "regression" in b65abcafc7 ("grep: use PCRE v2
for optimized fixed-string search", 2019-07-01), I'm putting that in
scare-quotes because before then we wouldn't properly support these
complex case-folding, locale etc. cases either, it just broke in
different ways.
There was a bug related to this the PCRE2_NO_START_OPTIMIZE flag fixed
in PCREv2 10.36. It can be worked around by setting the
PCRE2_NO_START_OPTIMIZE flag. Let's do that in those cases, and add
tests for the bug.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove support for using version 1 of the PCRE library. Its use has
been discouraged by upstream for a long time, and it's in a
bugfix-only state.
Anyone who was relying on v1 in particular got a nudge to move to v2
in e6c531b808 (Makefile: make USE_LIBPCRE=YesPlease mean v2, not v1,
2018-03-11), which was first released as part of v2.18.0.
With this the LIBPCRE2 test prerequisites is redundant to PCRE. But
I'm keeping it for self-documentation purposes, and to avoid conflict
with other in-flight PCRE patches.
I'm also not changing all of our own "pcre2" names to "pcre", i.e. the
inverse of 6d4b5747f0 (grep: change internal *pcre* variable &
function names to be *pcre1*, 2017-05-25). I don't see the point, and
it makes the history/blame harder to read. Maybe if there's ever a
PCRE v3...
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a `struct grep_opt` with our defaults which we then copy into
the caller's struct. Rather than zeroing the target struct and copying
each element one by one, just copy everything at once. This leaves the
code simpler and more maintainable.
We don't have any ownership issues with what we're copying now and can
just greedily copy the whole thing. If and when we do need to handle
such elements (`char *`?), we must and can handle it appropriately. Make
sure to leave a comment to our future selves.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 15fabd1bbd ("builtin/grep.c: make configuration callback more
reusable", 2012-10-09), we learned to fill a `static struct grep_opt
grep_defaults` which we can use as a blueprint for other such structs.
At the time, we didn't consider designated initializers to be widely
useable, but these days, we do. (See, e.g., cbc0f81d96 ("strbuf: use
designated initializers in STRBUF_INIT", 2017-07-10).)
Use designated initializers to let the compiler set up the struct and so
that we don't need to remember to call `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
René Scharfe
Ævar Arnfjörð Bjarmason
Taylor Blau
Lénaïc Huard
Hamza Mahfooz
Jeff King
Jonathan Tan
brian m. carlson
Martin Ågren