While signed tags and commits assert that the objects thusly signed
came from you, who signed these objects, there is not a good way to
assert that you wanted to have a particular object at the tip of a
particular branch. My signing v2.0.1 tag only means I want to call
the version v2.0.1, and it does not mean I want to push it out to my
'master' branch---it is likely that I only want it in 'maint', so
the signature on the object alone is insufficient.
The only assurance to you that 'maint' points at what I wanted to
place there comes from your trust on the hosting site and my
authentication with it, which cannot easily audited later.
Introduce a mechanism that allows you to sign a "push certificate"
(for the lack of better name) every time you push, asserting that
what object you are pushing to update which ref that used to point
at what other object. Think of it as a cryptographic protection for
ref updates, similar to signed tags/commits but working on an
orthogonal axis.
The basic flow based on this mechanism goes like this:
1. You push out your work with "git push --signed".
2. The sending side learns where the remote refs are as usual,
together with what protocol extension the receiving end
supports. If the receiving end does not advertise the protocol
extension "push-cert", an attempt to "git push --signed" fails.
Otherwise, a text file, that looks like the following, is
prepared in core:
certificate version 0.1
pusher Junio C Hamano <gitster@pobox.com> 1315427886 -0700
7339ca65... 21580ecb... refs/heads/master
3793ac56... 12850bec... refs/heads/next
The file begins with a few header lines, which may grow as we
gain more experience. The 'pusher' header records the name of
the signer (the value of user.signingkey configuration variable,
falling back to GIT_COMMITTER_{NAME|EMAIL}) and the time of the
certificate generation. After the header, a blank line follows,
followed by a copy of the protocol message lines.
Each line shows the old and the new object name at the tip of
the ref this push tries to update, in the way identical to how
the underlying "git push" protocol exchange tells the ref
updates to the receiving end (by recording the "old" object
name, the push certificate also protects against replaying). It
is expected that new command packet types other than the
old-new-refname kind will be included in push certificate in the
same way as would appear in the plain vanilla command packets in
unsigned pushes.
The user then is asked to sign this push certificate using GPG,
formatted in a way similar to how signed tag objects are signed,
and the result is sent to the other side (i.e. receive-pack).
In the protocol exchange, this step comes immediately before the
sender tells what the result of the push should be, which in
turn comes before it sends the pack data.
3. When the receiving end sees a push certificate, the certificate
is written out as a blob. The pre-receive hook can learn about
the certificate by checking GIT_PUSH_CERT environment variable,
which, if present, tells the object name of this blob, and make
the decision to allow or reject this push. Additionally, the
post-receive hook can also look at the certificate, which may be
a good place to log all the received certificates for later
audits.
Because a push certificate carry the same information as the usual
command packets in the protocol exchange, we can omit the latter
when a push certificate is in use and reduce the protocol overhead.
This however is not included in this patch to make it easier to
review (in other words, the series at this step should never be
released without the remainder of the series, as it implements an
interim protocol that will be incompatible with the final one).
As such, the documentation update for the protocol is left out of
this step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use it to make sure that the feature request is sent only once on
the very first request packet (ignoring the "shallow " line, which
was an unfortunate mistake we cannot retroactively fix with existing
receive-pack already deployed in the field) and we set it to "true"
with cmds_sent++, not because we care about the actual number of
updates sent but because it is merely an idiomatic way.
Set it explicitly to one to clarify that the code that uses this
variable only cares about its zero-ness.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main loop over remote_refs list inspects the ref status
to see if we need to generate pack data (i.e. a delete-only push
does not need to send any additional data), resets it to "expecting
the status report" state, and formats the actual update commands
to be sent.
Split the former two out of the main loop, as it will become
conditional in later steps.
Besides, we should have code that does real thing here, before the
"Finally, tell the other end!" part ;-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable counts how many non-deleting command is being sent, but
is only checked with 0-ness to decide if we need to send the pack
data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A run of 'var ? " var" : ""' fed to a long printf string in a deeply
nested block was hard to read. Move it outside the loop and format
it into a strbuf.
As an added bonus, the trick to add "agent=<agent-name>" by using
two conditionals is replaced by a more readable version.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We tried to avoid sending one extra byte, NUL and nothing behind it
to signal there is no protocol capabilities being sent, on the first
command packet on the wire, but it just made the code look ugly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new helper function ref_update_to_be_sent() decides for each ref
if the update is to be sent based on the status previously set by
set_ref_status_for_push() and also if this is a mirrored push.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
20e8b465 (refactor ref status logic for pushing, 2010-01-08)
restructured the code to set status for each ref to be pushed, but
did not quite go far enough. We inspect the status set earlier by
set_refs_status_for_push() and then perform yet another update to
the status of a ref with an otherwise OK status to be deleted to
mark it with REF_STATUS_REJECT_NODELETE when the protocol tells us
never to delete.
Split the latter into a separate loop that comes before we enter the
per-ref loop. This way we would have one less condition to check in
the main loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
Commit f2c681cf ("send-pack: support pushing from a shallow clone
via http", 05-12-2013) adds the 'advertise_shallow_grafts_buf'
function as an external symbol.
Noticed by sparse. ("'advertise_shallow_grafts_buf' was not declared.
Should it be static?")
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
The latter can do everything the former can and is used in many more
places.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up to now git has assumed that all servers are able to fix thin
packs. This is however not always the case.
Document the 'no-thin' capability and prevent send-pack from generating
a thin pack if the server advertises it.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath that send_pack() calls pack_objects() mistakenly
closed the same file descriptor twice, leading to potentially
closing a wrong file descriptor that was opened in the meantime.
* jl/pack-transfer-avoid-double-close:
Clear fd after closing to avoid double-close error
In send_pack(), clear the fd passed to pack_objects() by setting
it to -1, since pack_objects() closes the fd (via a call to
run_command()). Likewise, in get_pack(), clear the fd passed to
run_command().
Not doing so risks having git_transport_push(), caller of
send_pack(), closing the fd again, possibly incorrectly closing
some other open file; or similarly with fetch_refs_from_pack(),
indirect caller of get_pack().
Signed-off-by: Jens Lindström <jl@opera.com>
Acked-by: Jeff King <peff@peff.net>
Acked-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the deepest part of the callchain for "git push" (and
"git send-pack") to enforce "the old value of the ref must be this,
otherwise fail this push" (aka "compare-and-swap" / "--lockref").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of "struct ref" in "cache.h", a header file so
central to the system, always confused me. This structure is not
about the local ref used by sha1-name API to name local objects.
It is what refspecs are expanded into, after finding out what refs
the other side has, to define what refs are updated after object
transfer succeeds to what values. It belongs to "remote.h" together
with "struct refspec".
While we are at it, also move the types and functions related to the
Git transport connection to a new header file connect.h
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the callers of packet_read_line just read into a
static 1000-byte buffer (callers which handle arbitrary
binary data already use LARGE_PACKET_MAX). This works fine
in practice, because:
1. The only variable-sized data in these lines is a ref
name, and refs tend to be a lot shorter than 1000
characters.
2. When sending ref lines, git-core always limits itself
to 1000 byte packets.
However, the only limit given in the protocol specification
in Documentation/technical/protocol-common.txt is
LARGE_PACKET_MAX; the 1000 byte limit is mentioned only in
pack-protocol.txt, and then only describing what we write,
not as a specific limit for readers.
This patch lets us bump the 1000-byte limit to
LARGE_PACKET_MAX. Even though git-core will never write a
packet where this makes a difference, there are two good
reasons to do this:
1. Other git implementations may have followed
protocol-common.txt and used a larger maximum size. We
don't bump into it in practice because it would involve
very long ref names.
2. We may want to increase the 1000-byte limit one day.
Since packets are transferred before any capabilities,
it's difficult to do this in a backwards-compatible
way. But if we bump the size of buffer the readers can
handle, eventually older versions of git will be
obsolete enough that we can justify bumping the
writers, as well. We don't have plans to do this
anytime soon, but there is no reason not to start the
clock ticking now.
Just bumping all of the reading bufs to LARGE_PACKET_MAX
would waste memory. Instead, since most readers just read
into a temporary buffer anyway, let's provide a single
static buffer that all callers can use. We can further wrap
this detail away by having the packet_read_line wrapper just
use the buffer transparently and return a pointer to the
static storage. That covers most of the cases, and the
remaining ones already read into their own LARGE_PACKET_MAX
buffers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The packets sent during ref negotiation are all terminated
by newline; even though the code to chomp these newlines is
short, we end up doing it in a lot of places.
This patch teaches packet_read_line to auto-chomp the
trailing newline; this lets us get rid of a lot of inline
chomping code.
As a result, some call-sites which are not reading
line-oriented data (e.g., when reading chunks of packfiles
alongside sideband) transition away from packet_read_line to
the generic packet_read interface. This patch converts all
of the existing callsites.
Since the function signature of packet_read_line does not
change (but its behavior does), there is a possibility of
new callsites being introduced in later commits, silently
introducing an incompatibility. However, since a later
patch in this series will change the signature, such a
commit would have to be merged directly into this commit,
not to the tip of the series; we can therefore ignore the
issue.
This is an internal cleanup and should produce no change of
behavior in the normal case. However, there is one corner
case to note. Callers of packet_read_line have never been
able to tell the difference between a flush packet ("0000")
and an empty packet ("0004"), as both cause packet_read_line
to return a length of 0. Readers treat them identically,
even though Documentation/technical/protocol-common.txt says
we must not; it also says that implementations should not
send an empty pkt-line.
By stripping out the newline before the result gets to the
caller, we will now treat the newline-only packet ("0005\n")
the same as an empty packet, which in turn gets treated like
a flush packet. In practice this doesn't matter, as neither
empty nor newline-only packets are part of git's protocols
(at least not for the line-oriented bits, and readers who
are not expecting line-oriented packets will be calling
packet_read directly, anyway). But even if we do decide to
care about the distinction later, it is orthogonal to this
patch. The right place to tighten would be to stop treating
empty packets as flush packets, and this change does not
make doing so any harder.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just write_or_die by another name. The one
distinction is that write_or_die will treat EPIPE specially
by suppressing error messages. That's fine, as we die by
SIGPIPE anyway (and in the off chance that it is disabled,
write_or_die will simulate it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code predates prefixcmp, so it used memcmp along with
static sizes. Replacing these memcmps with prefixcmp makes
the code much more readable, and the lack of static sizes
will make refactoring it in future patches simpler.
Note that we used to be unnecessarily liberal in parsing the
"unpack" status line, and would accept "unpack ok\njunk". No
version of git has ever produced that, and it violates the
BNF in Documentation/technical/pack-protocol.txt. Let's take
this opportunity to tighten the check by converting the
prefix comparison into a strcmp.
While we're in the area, let's also fix a vague error
message that does not follow our usual conventions (it
writes directly to stderr and does not use the "error:"
prefix).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References are allowed to update from one commit-ish to another if the
former is an ancestor of the latter. This behavior is oriented to
branches which are expected to move with commits. Tag references are
expected to be static in a repository, though, thus an update to
something under refs/tags/ should be rejected unless the update is
forced.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send_pack() is used by transport.c, part of libgit.a while it stays in
builtin/send-pack.c. Move it to send-pack.c so that we won't get
undefined reference if a program that uses libgit.a happens to pull it
in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Also marks some more things as const, as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of remote refs in struct transport should be const, because
builtin-fetch will get confused if it changes.
The url in git_connect should be const (and work on a copy) instead of
requiring the caller to copy it.
match_refs doesn't modify the refspecs it gets.
get_fetch_map and get_remote_ref don't change the list they get.
Allow transport get_refs_list methods to modify the struct transport.
Add a function to copy a list of refs, when a function needs a mutable
copy of a const list.
Add a function to check the type of a ref, as per the code in connect.c
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/forkexec:
Use the asyncronous function infrastructure to run the content filter.
Avoid a dup2(2) in apply_filter() - start_command() can do it for us.
t0021-conversion.sh: Test that the clean filter really cleans content.
upload-pack: Run rev-list in an asynchronous function.
upload-pack: Move the revision walker into a separate function.
Use the asyncronous function infrastructure in builtin-fetch-pack.c.
Add infrastructure to run a function asynchronously.
upload-pack: Use start_command() to run pack-objects in create_pack_file().
Have start_command() create a pipe to read the stderr of the child.
Use start_comand() in builtin-fetch-pack.c instead of explicit fork/exec.
Use run_command() to spawn external diff programs instead of fork/exec.
Use start_command() to run content filters instead of explicit fork/exec.
Use start_command() in git_connect() instead of explicit fork/exec.
Change git_connect() to return a struct child_process instead of a pid_t.
Conflicts:
builtin-fetch-pack.c
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
This prepares the API of git_connect() and finish_connect() to operate on
a struct child_process. Currently, we just use that object as a placeholder
for the pid that we used to return. A follow-up patch will change the
implementation of git_connect() and finish_connect() to make full use
of the object.
Old code had early-return-on-error checks at the calling sites of
git_connect(), but since git_connect() dies on errors anyway, these checks
were removed.
[sp: Corrected style nit of "conn == NULL" to "!conn"]
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Previously, we updated the tracking refs (which match refs we
are pushing) while generating the list of refs to send.
However, at that point we don't know whether the refs were
accepted.
Instead, we now wait until we get a response code from the
server. If an error was indicated, we don't update any local
tracking refs. Technically some refs could have been updated
on the remote, but since the local ref update is just an
optimization to avoid an extra fetch, we are better off
erring on the side of correctness.
The user-visible message is now generated much later in the
program, and has been tweaked to make more sense.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Document additional 1.5.3.5 fixes in release notes
Avoid 'expr index' on Mac OS X as it isn't supported
filter-branch: update current branch when rewritten
fix filter-branch documentation
helpful error message when send-pack finds no refs in common.
Fix setup_git_directory_gently() with relative GIT_DIR & GIT_WORK_TREE
Correct typos in release notes for 1.5.3.5
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
Implement support for --dry-run, so that it can be used
in calls from git-push. With this flag set, git-send-pack
will not send any updates to the server.
Signed-off-by: Brian Ewins <brian.ewins@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Anyplace we talk about the address of a remote repository we always
refer to it as a URL, especially in the configuration file and
.git/remotes where we call it "remote.$n.url" or start the first
line with "URL:". Calling this value a uri within the internal C
code just doesn't jive well with our commonly accepted terms.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A function intended to be called from builtins updating refs
by locking them before write, specially those that came from
scripts using "git update-ref".
[jc: with minor fixups]
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function for_each_remote() does exactly what the name
suggests.
The function remote_find_tracking() was extended to be able to
search remote refs for a given local ref. The caller sets
either src or dst (but not both) in the refspec parameter, and
remote_find_tracking() will fill in the other and return 0.
Both changes are required for the next step: simplification of
git-branch's --track functionality.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This means that send-pack and http-push will support pattern refspecs,
so builtin-push.c doesn't have to expand them, and also git push can
just turn --tags into "refs/tags/*", further simplifying
builtin-push.c
check_ref_format() gets a third "conditionally okay" result for
something that's valid as a pattern but not as a particular ref.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This also adds a --remote option to send-pack, which specifies the
configured remote being used. It is provided automatically by
git-push, and must match the url (which is still needed, since there
could be multiple urls).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git notify the user about host resolution/connection attempts.
This is useful both as a progress indicator on slow links, and helps
reassure the user there are no firewall problems.
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
For now it's just to get a more descriptive name. Later we might update the
push protocol to run more than one program on the other end. Moreover this
matches better the corresponding config option remote.<name>. receivepack.
--exec continues to work
Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
add all supported options to Documentation/git-....txt and the usage strings.
Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano
Ramsay Jones
Nguyễn Thái Ngọc Duy
Christian Couder
Carlos Martín Nieto
Jens Lindstrom
Jeff King
Chris Rorvick
Daniel Barkalow
Johannes Sixt
Shawn O. Pearce
Andrew Clausen
Brian Ewins
Carlos Rica
Johannes Schindelin
Michael S. Tsirkin
Junio C Hamano
Uwe Kleine-König