* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Apply the part of "the_repository.pending.cocci" pertaining to
"object-store.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit-reach.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up around unused function parameters.
* jk/unused-post-2.39:
userdiff: mark unused parameter in internal callback
list-objects-filter: mark unused parameters in virtual functions
diff: mark unused parameters in callbacks
xdiff: mark unused parameter in xdl_call_hunk_func()
xdiff: drop unused parameter in def_ff()
ws: drop unused parameter from ws_blank_line()
list-objects: drop process_gitlink() function
blob: drop unused parts of parse_blob_buffer()
ls-refs: use repository parameter to iterate refs
"merge-tree" learns a new `--merge-base` option.
* kz/merge-tree-merge-base:
docs: fix description of the `--merge-base` option
merge-tree.c: allow specifying the merge-base when --stdin is passed
merge-tree.c: add --merge-base=<commit> option
The diff code provides a format_callback interface, but not every
callback needs each parameter (e.g., the "opt" and "data" parameters are
frequently left unused). Likewise for the output_prefix callback, the
low-level change/add_remove interfaces, the callbacks used by
xdi_diff(), etc.
Mark unused arguments in the callback implementations to quiet
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "USE_THE_INDEX_COMPATIBILITY_MACROS" into that setting
and a more narrow "USE_THE_INDEX_VARIABLE". In the case of these
built-ins we only need "the_index" variable, but not the compatibility
wrapper for functions we're not using.
Let's then have some users of "USE_THE_INDEX_COMPATIBILITY_MACROS" use
this more narrow and descriptive define.
For context: The USE_THE_INDEX_COMPATIBILITY_MACROS macro was added to
test-tool.h in f8adbec9fe (cache.h: flip
NO_THE_INDEX_COMPATIBILITY_MACROS switch, 2019-01-24).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit added a `--merge-base` option in order to allow
using a specified merge-base for the merge. Extend the input accepted
by `--stdin` to also allow a specified merge-base with each merge
requested. For example:
printf "<b3> -- <b1> <b2>" | git merge-tree --stdin
does a merge of b1 and b2, and uses b3 as the merge-base.
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
This patch will give our callers more flexibility to use `git merge-tree`,
such as:
git merge-tree --write-tree --merge-base=branch^ HEAD branch
This does a merge of HEAD and branch, but uses branch^ as the merge-base.
And the reason why using an option flag instead of a positional argument
is to allow additional commits passed to merge-tree to be handled via an
octopus merge in the future.
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Add an option, --stdin, to merge-tree which will accept lines of input
with two branches to merge per line, and which will perform all the
merges and give output for each in turn. This option implies -z, and
modifies the output to also include a merge status since the exit code
of the program can no longer convey that information now that multiple
merges are involved.
This could be useful, for example, by Git hosting providers. When one
branch is updated, one may want to check whether all code reviews
targetting that branch can still cleanly merge. Avoiding the overhead
of starting up a separate process for each of those code reviews might
provide significant savings in a repository with many code reviews.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Folks may want to merge histories that have no common ancestry; provide
a flag with the same name as used by `git merge` to allow this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much as `git ls-files` has a -z option, let's add one to merge-tree so
that the conflict-info section can be NUL terminated (and avoid quoting
of unusual filenames).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new `detailed` parameter, a new mode can be triggered when
displaying the merge messages: The `detailed` mode prints NUL-delimited
fields of the following form:
<path-count> NUL <path>... NUL <conflict-type> NUL <message>
The `<path-count>` field determines how many `<path>` fields there are.
The intention of this mode is to support server-side operations, where
worktree-less merges can lead to conflicts and depending on the type
and/or path count, the caller might know how to handle said conflict.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much like `git merge` updates the index with information of the form
(mode, oid, stage, name)
provide this output for conflicted files for merge-tree as well.
Provide a --name-only option for users to exclude the mode, oid, and
stage and only get the list of conflicted filenames.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of `git merge-tree --write-tree` will often want to know which
files had conflicts. While they could potentially attempt to parse the
CONFLICT notices printed, those messages are not meant to be machine
readable. Provide a simpler mechanism of just printing the files (in
the same format as `git ls-files` with quoting, but restricted to
unmerged files) in the output before the free-form messages.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running `git merge-tree --write-tree`, we previously would only
return an exit status reflecting the cleanness of a merge, and print out
the toplevel tree of the resulting merge. Merges also have
informational messages, such as:
* "Auto-merging <PATH>"
* "CONFLICT (content): ..."
* "CONFLICT (file/directory)"
* etc.
In fact, when non-content conflicts occur (such as file/directory,
modify/delete, add/add with differing modes, rename/rename (1to2),
etc.), these informational messages may be the only notification the
user gets since these conflicts are not representable in the contents
of the file.
Add a --[no-]messages option so that callers can request these messages
be included at the end of the output. Include such messages by default
when there are conflicts, and omit them by default when the merge is
clean.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the ability to perform real merges rather than just trivial
merges (meaning handling three way content merges, recursive ancestor
consolidation, renames, proper directory/file conflict handling, and so
forth). However, unlike `git merge`, the working tree and index are
left alone and no branch is updated.
The only output is:
- the toplevel resulting tree printed on stdout
- exit status of 0 (clean), 1 (conflicts present), anything else
(merge could not be performed; unknown if clean or conflicted)
This output is meant to be used by some higher level script, perhaps in
a sequence of steps like this:
NEWTREE=$(git merge-tree --write-tree $BRANCH1 $BRANCH2)
test $? -eq 0 || die "There were conflicts..."
NEWCOMMIT=$(git commit-tree $NEWTREE -p $BRANCH1 -p $BRANCH2)
git update-ref $BRANCH1 $NEWCOMMIT
Note that higher level scripts may also want to access the
conflict/warning messages normally output during a merge, or have quick
access to a list of files with conflicts. That is not available in this
preliminary implementation, but subsequent commits will add that
ability (meaning that NEWTREE would be a lot more than a tree in the
case of conflicts).
This also marks the traditional trivial merge of merge-tree as
deprecated. The trivial merge not only had limited applicability, the
output format was also difficult to work with (and its format
undocumented), and will generally be less performant than real merges.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let merge-tree accept a `--write-tree` parameter for choosing real
merges instead of trivial merges, and accept an optional
`--trivial-merge` option to get the traditional behavior. Note that
these accept different numbers of arguments, though, so these names
need not actually be used.
Note that real merges differ from trivial merges in that they handle:
- three way content merges
- recursive ancestor consolidation
- renames
- proper directory/file conflict handling
- etc.
Basically all the stuff you'd expect from `git merge`, just without
updating the index and working tree. The initial shell added here does
nothing more than die with "real merges are not yet implemented", but
that will be fixed in subsequent commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding a non-trivial merge capability to merge-tree,
move the existing merge logic for trivial merges into a new function.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive.h defined its own merge_trees() function, different than
the one found in builtin/merge-tree.c. That was okay in the past, but
we want merge-tree to be able to use the merge-ort functions, which will
end up including merge-recursive.h. Rename the function found in
builtin/merge-tree.c to avoid the conflict.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the code added in 611e42a598 (xdiff: provide a separate emit
callback for hunks, 2018-11-02) to be more readable by using
designated initializers.
This changes "priv" in rerere.c to be initialized to NULL as we did in
merge-tree.c. That's not needed as we'll only use it if the callback
is defined, but being consistent here is better and less verbose.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xpparam_t structures are usually zero-initialized before their specific
fields are assigned to, but there are three locations in the tree where
that does not happen. Add the missing memset() calls in order to make
initialization of xpparam_t structures consistent tree-wide and to
prevent stack garbage from being used as field values.
Signed-off-by: Michał Kępień <michal@isc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Codepaths to walk tree objects have been audited for integer
overflows and hardened.
* jk/tree-walk-overflow:
tree-walk: harden make_traverse_path() length computations
tree-walk: add a strbuf wrapper for make_traverse_path()
tree-walk: accept a raw length for traverse_path_len()
tree-walk: use size_t consistently
tree-walk: drop oid from traverse_info
setup_traverse_info(): stop copying oid
All but one of the callers of make_traverse_path() allocate a new heap
buffer to store the path. Let's give them an easy way to write to a
strbuf, which saves them from computing the length themselves (which is
especially tricky when they want to add to the path). It will also make
it easier for us to change the make_traverse_path() interface in a
future patch to improve its bounds-checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We take a "struct name_entry", but only care about the length of the
path name. Let's just take that length directly, making it easier to use
the function from callers that sometimes do not have a name_entry at
all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the previous commit shows, the presence of an oid in each level of
the traverse_info is confusing and ultimately not necessary. Let's drop
it to make it clear that it will not always be set (as well as convince
us that it's unused, and let the compiler catch any merges with other
branches that do add new uses).
Since the oid is part of name_entry, we'll actually stop embedding a
name_entry entirely, and instead just separately hold the pathname, its
length, and the mode.
This makes the resulting code slightly more verbose as we have to pass
those elements around individually. But it also makes it more clear what
each code path is going to use (and in most of the paths, we really only
care about the pathname itself).
A few of these conversions are noisier than they need to be, as they
also take the opportunity to rename "len" to "namelen" for clarity
(especially where we also have "pathlen" or "ce_len" alongside).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We assume that if setup_traverse_info() is passed a non-empty "base"
string, that string is pointing into a tree object and we can read the
object oid by skipping past the trailing NUL.
As it turns out, this is not true for either of the two calls, and we
may end up reading garbage bytes:
1. In git-merge-tree, our base string is either empty (in which case
we'd never run this code), or it comes from our traverse_path()
helper. The latter overallocates a buffer by the_hash_algo->rawsz
bytes, but then fills it with only make_traverse_path(), leaving
those extra bytes uninitialized (but part of a legitimate heap
buffer).
2. In unpack_trees(), we pass o->prefix, which is some arbitrary
string from the caller. In "git read-tree --prefix=foo", for
instance, it will point to the command-line parameter, and we'll
read 20 bytes past the end of the string.
Interestingly, tools like ASan do not detect (2) because the process
argv is part of a big pre-allocated buffer. So we're reading trash, but
it's trash that's probably part of the next argument, or the
environment.
You can convince it to fail by putting something like this at the
beginning of common-main.c's main() function:
{
int i;
for (i = 0; i < argc; i++)
argv[i] = xstrdup_or_null(argv[i]);
}
That puts the arguments into their own heap buffers, so running:
make SANITIZE=address test
will find problems when "read-tree --prefix" is used (e.g., in t3030).
Doubly interesting, even with the hackery above, this does not fail
prior to ea82b2a085 (tree-walk: store object_id in a separate member,
2019-01-15). That commit switched setup_traverse_info() to actually
copying the hash, rather than simply pointing to it. That pointer was
always pointing to garbage memory, but that commit started actually
dereferencing the bytes, which is what triggers ASan.
That also implies that nobody actually cares about reading these oid
bytes anyway (or at least no path covered by our tests). And manual
inspection of the code backs that up (I'll follow this patch with some
cleanups that show definitively this is the case, but they're quite
invasive, so it's worth doing this fix on its own).
So let's drop the bogus hashcpy(), along with the confusing oversizing
in merge-tree.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, clean up the_repo usage in builtin/merge-tree.c a tiny
bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
The code to walk tree objects has been taught that we may be
working with object names that are not computed with SHA-1.
* bc/tree-walk-oid:
cache: make oidcpy always copy GIT_MAX_RAWSZ bytes
tree-walk: store object_id in a separate member
match-trees: use hashcpy to splice trees
match-trees: compute buffer offset correctly when splicing
tree-walk: copy object ID before use
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing a tree, we read the object ID directly out of the tree
buffer. This is normally fine, but such an object ID cannot be used with
oidcpy, which copies GIT_MAX_RAWSZ bytes, because if we are using SHA-1,
there may not be that many bytes to copy.
Instead, store the object ID in a separate struct member. Since we can
no longer efficiently compute the path length, store that information as
well in struct name_entry. Ensure we only copy the object ID into the
new buffer if the path length is nonzero, as some callers will pass us
an empty path with no object ID following it, and we will not want to
read past the end of the buffer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to support :(attr) when matching pathspec on a tree,
tree_entry_interesting() needs to take an index (because
git_check_attr() needs it). This is the preparation step for it. This
also makes it clearer what index we fall back to when looking up
attributes during an unpack-trees operation: the source index.
This also fixes revs->pruning.repo initialization that should have
been done in 2abf350385 (revision.c: remove implicit dependency on
the_index - 2018-09-21). Without it, skip_uninteresting() will
dereference a NULL pointer through this call chain
get_revision(revs)
get_revision_internal
get_revision_1
try_to_simplify_commit
rev_compare_tree
diff_tree_oid(..., &revs->pruning)
ll_diff_tree_oid
diff_tree_paths
ll_diff_tree
skip_uninteresting
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interface into "xdiff" library used to discover the offset and
size of a generated patch hunk by first formatting it into the
textual hunk header "@@ -n,m +k,l @@" and then parsing the numbers
out. A new interface has been introduced to allow callers a more
direct access to them.
* jk/xdiff-interface:
xdiff-interface: drop parse_hunk_header()
range-diff: use a hunk callback
diff: convert --check to use a hunk callback
combine-diff: use an xdiff hunk callback
diff: use hunk callback for word-diff
diff: discard hunk headers for patch-ids earlier
diff: avoid generating unused hunk header lines
xdiff-interface: provide a separate consume callback for hunks
xdiff: provide a separate emit callback for hunks
The xdiff library always emits hunk header lines to our callbacks as
formatted strings like "@@ -a,b +c,d @@\n". This is convenient if we're
going to output a diff, but less so if we actually need to compute using
those numbers, which requires re-parsing the line.
In preparation for moving away from this, let's teach xdiff a new
callback function which gets the broken-out hunk information. To help
callers that don't want to use this new callback, if it's NULL we'll
continue to format the hunk header into a string.
Note that this function renames the "outf" callback to "out_line", as
well. This isn't strictly necessary, but helps in two ways:
1. Now that there are two callbacks, it's nice to use more descriptive
names.
2. Many callers did not zero the emit_callback_data struct, and needed
to be modified to set ecb.out_hunk to NULL. By changing the name of
the existing struct member, that guarantees that any new callers
from in-flight topics will break the build and be examined
manually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_blob
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is more consistent with the project style. The majority of Git's
source files use dashes in preference to underscores in their file names.
Signed-off-by: Stefan Beller <sbeller@google.com>
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All callers of fill_tree_descriptor() have been converted to object_id
already, so convert that function as well. As a nice side-effect we get
rid of NULL checks in tree-diff.c, as fill_tree_descriptor() already
does them for us.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_blob to take a pointer to struct object_id.
The commit was created with manual changes to blob.c and blob.h, plus
the following semantic patch:
@@
expression E1;
@@
- lookup_blob(E1.hash)
+ lookup_blob(&E1)
@@
expression E1;
@@
- lookup_blob(E1->hash)
+ lookup_blob(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren
Junio C Hamano
Ævar Arnfjörð Bjarmason
Jeff King
Kyle Zhao
Michał Kępień
Nguyễn Thái Ngọc Duy
brian m. carlson
Stefan Beller
René Scharfe