The reflog entries left by "git rebase" and "git rebase -i" were
inconsistent (the interactive one gave an abbreviated object name).
* mg/rebase-i-onto-reflog-in-full:
rebase -i: use full onto sha1 in reflog
'git rebase' uses the full onto sha1 for the reflog message whereas 'git
rebase -i' uses the short sha1. This is not only inconsistent, but can
lead to problems when the reflog is inspected at a later time at which
that abbreviation may have become ambiguous.
Make 'rebase -i' use the full onto sha1, as well.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" learned to optionally keep commits that do not introduce
any change in the original history.
By Neil Horman
* nh/empty-rebase:
git-rebase: add keep_empty flag
git-cherry-pick: Add test to validate new options
git-cherry-pick: Add keep-redundant-commits option
git-cherry-pick: add allow-empty option
Add a command line switch to git-rebase to allow a user the ability to specify
that they want to keep any commits in a series that are empty.
When git-rebase's type is am, then this option will automatically keep any
commit that has a tree object identical to its parent.
This patch changes the default behavior of interactive rebases as well. With
this patch, git-rebase -i will produce a revision set passed to
git-revision-editor, in which empty commits are commented out. Empty commits
may be kept manually by uncommenting them. If the new --keep-empty option is
used in an interactive rebase the empty commits will automatically all be
uncommented in the editor.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giving "--continue" to a conflicted "rebase -i" session skipped a commit
that only results in changes to submodules.
By John Keeping
* jk/rebase-i-submodule-conflict-only:
rebase -i continue: don't skip commits that only change submodules
When git-rebase--interactive stops due to a conflict and the only change
to be committed is in a submodule, the test for whether there is
anything to be committed ignores the staged submodule change. This
leads rebase to skip creating the commit for the change.
While unstaged submodule changes should be ignored to avoid needing to
update submodules during a rebase, it is safe to remove the
--ignore-submodules option to diff-index because --cached ensures that
it is only checking the index. This was discussed in [1] and a test is
included to ensure that unstaged changes are still ignored correctly.
[1] http://thread.gmane.org/gmane.comp.version-control.git/188713
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nelson Benitez Leon opened a discussion with a patch with this in the
note:
Hi, I was using git rebase -i for some time now and never occured to
me I could reorder the commit lines to affect the order the commits
are applied, learnt that recently from a git tutorial.
Nelson's patch was to stress the fact that the lines in the insn sheet can
be re-ordered in a much more verbose way. Let's add a one-liner reminder
and also remind that the lines in the insn sheet is read from top to
bottom, unlike the "git log" output.
Discussion-triggered-by: Nelson Benitez Leon
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"commit --amend" could fail in cases like the user empties the commit
message, or pre-commit failed. When it fails, rebase should be
interrupted and alert the user, rather than ignoring the error and
continue on rebasing. This also gives users a way to gracefully
interrupt a "reword" if they decided they actually want to do an "edit",
or even "rebase --abort".
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The insn sheet used by "rebase -i" is designed to be easily editable by
any text editor, but an editor that is specifically meant for it (but
is otherwise unsuitable for editing regular text files) could be useful
by allowing drag & drop reordering in a GUI environment, for example.
The GIT_SEQUENCE_EDITOR environment variable and/or the sequence.editor
configuration variable can be used to specify such an editor, while
allowing the usual editor to be used to edit commit log messages. As
usual, the environment variable takes precedence over the configuration
variable.
It is envisioned that other "sequencer" based tools will use the same
mechanism.
Signed-off-by: Peter Oberndorfer <kumbayo84@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "exec $cmd" touched the index or the working tree, and exited with
non-zero status, the code did not check and warn that there now are
uncommitted changes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After an "exec false" stops the rebase and gives the control back to
the user, if changes are added to the index, "rebase --continue" fails
with this message, which may technically be correct, but does not point
at the real problem:
.../git-rebase--interactive: line 774: .../.git/rebase-merge/author-script: No such file or directory
We could try auto-amending HEAD, but this goes against the logic of
.git/rebase-merge/author-script (see also the testcase 'auto-amend only
edited commits after "edit"' in t3404-rebase-interactive.sh) to
auto-amend something the user hasn't explicitely asked to edit.
Instead of doing anything automatically, detect the situation and give a
clean error message. While we're there, also clarify the error message in
case '. "$author_script"' fails, which now corresponds to really weird
senario where the author script exists but can't be read.
Test-case-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider this graph:
D---E (topic, HEAD)
/ /
A---B---C (master)
\
F (topic2)
and the following three commands:
1. git rebase -i -p A
2. git rebase -i -p --onto F A
3. git rebase -i -p B
Currently, (1) and (2) will pick B, D, C, and E onto A and F,
respectively. However, (3) will only pick D and E onto B, but not C,
which is inconsistent with (1) and (2). As a result, we cannot modify C
during the interactive-rebase.
The current behavior also creates a bug if we do:
4. git rebase -i -p C
In (4), E is never picked. And since interactive-rebase resets "HEAD"
to "onto" before picking any commits, D and E are lost after the
interactive-rebase.
This patch fixes the inconsistency and bug by ensuring that all children
of upstream are always picked. This essentially reverts the commit:
d80d6bc146
When compiling the todo list, commits reachable from "upstream" should
never be skipped under any conditions. Otherwise, we lose the ability
to modify them like (3), and create a bug like (4).
Two of the tests contain a scenario like (3). Since the new behavior
added more commits for picking, these tests need to be updated to
account for the additional pick lines. A new test has also been added
for (4).
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we finish a rebase, our detached HEAD is at the final
result. We update the original branch ref with this result,
and then point the HEAD symbolic ref at the updated branch.
We write a reflog for the branch update, but not for the
update of HEAD.
Because we're already at the final result on the detached
HEAD, moving to the branch actually doesn't change our
commit sha1 at all. So in that sense, a reflog entry would
be pointless.
However, humans do read reflogs, and an entry saying "rebase
finished: returning to refs/heads/master" can be helpful in
understanding what is going on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git rebase' uses 'git merge' to preserve merges (-p). This preserves
the original merge commit correctly, except when the original merge
commit was created by 'git merge --no-ff'. In this case, 'git rebase'
will fail to preserve the merge, because during 'git rebase', 'git
merge' will simply fast-forward and skip the commit. For example:
B
/ \
A---M
/
---o---O---P---Q
If we try to rebase M onto P, we lose the merge commit and this happens:
A---B
/
---o---O---P---Q
To correct this, we simply do a "no fast-forward" on all merge commits
when rebasing. Since by the time we decided to do a 'git merge' inside
'git rebase', it means there was a merge originally, so 'git merge'
should always create a merge commit regardless of what the merge
branches look like. This way, when rebase M onto P from the above
example, we get:
B
/ \
A---M
/
---o---O---P---Q
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-rebase.sh recently started sourcing
git-rebase--interactive.sh instead of executing it, executable bit of
the latter file should have been turned off and it should have been
moved from SCRIPT_SH to SCRIPT_LIB in the Makefile. Its two new
siblings, git-rebase--am.sh and git-rebase--merge.sh (whose executable
bits are already off) should also be moved to SCRIPT_LIB in the
Makefile.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before calling 'git cherry-pick', interactive rebase currently checks
if we are rebasing from root (if --root was passed). If we are, the
'--ff' flag to 'git cherry-pick' is omitted. However, according to the
documentation for 'git cherry-pick --ff', "If the current HEAD is the
same as the parent of the cherry-picked commit, then a fast forward to
this commit will be performed.". This should never be the case when
rebasing from root, so it should not matter whether --ff is passed, so
simplify the code by removing the condition.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8e4a91b (rebase -i: remember the settings of -v, -s and -p when
interrupted, 2007-07-08), the variable preserve_merges (then called
PRESERVE_MERGES) was detected from the state saved in
$GIT_DIR/rebase-merge in order to be used when the rebase resumed, but
its value was never actually used. The variable's value was only used
when the rebase was initated.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a rebase is resumed, interactive rebase remembers any merge
strategy passed when the rebase was initated. Make non-interactive
rebase remember any merge strategy as well. Also make non-interactive
rebase remember any merge strategy options.
To be able to resume a rebase that was initiated with an older version
of git (older than this commit), make sure not to expect the saved
option files to exist.
Test case idea taken from Junio's 71fc224 (t3402: test "rebase
-s<strategy> -X<opt>", 2010-11-11).
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, only interactive rebase remembers the value of the '-v'
flag from the initial invocation. Make non-interactive rebase also
remember it.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the code for writing the state to rebase-apply/ or
rebase-merge/ when a rebase is initiated. This will make it easier to
later make both interactive and non-interactive rebase remember the
options used.
Note that non-interactive rebase stores the sha1 of the original head
in a file called orig-head, while interactive rebase stores it in a
file called head. Change this by writing to orig-head in both
cases. When reading, try to read from orig-head. If that fails, read
from head instead. This protects users who upgraded git while they had
an ongoing interactive rebase, while still making it possible to
remove the code that reads from head at some point in the future.
Helped-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the common parts of the handling of the sub commands
'--continue', '--skip' and '--abort'. The '--abort' handling can
handled completely in git-rebase.sh.
After this refactoring, the calls to git-rebase--am.sh,
git-rebase--merge.sh and git-rebase--interactive.sh will be better
aligned. There will only be one call to interactive rebase that will
shortcut the very last part of git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make it possible to later remove the handling of --abort from
git-rebase--interactive.sh, align the implementation in git-rebase.sh
with the former by making it a bit more verbose.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename variables HEAD and OLDHEAD to orig_head and HEADNAME to
head_name, which are the names used in git-rebase.sh. This prepares
for factoring out of the code that persists these variables during the
entire rebase process. Using the same variable names to mean the same
thing in both files also makes the code easier to read.
While at it, also remove the DOTEST variable and use the state_dir
variable that was inherited from git-rebase.sh instead.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebase stops due to conflict, interactive rebase currently
displays a different hint to the user than non-interactive rebase
does. Use the same message for both types of rebase.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the call to the pre-rebase hook from
git-rebase--interactive.sh and rely on the call in
git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the check for clean work tree from git-rebase--interactive.sh and
rely on the check in git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the parsing and validation of references (onto, upstream, branch)
from git-rebase--interactive.sh and rely on the information exported from
git-rebase.sh.
By using the parsing of the --onto parameter in git-rebase.sh, this
improves the error message when the parameter is invalid.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorder validation steps in preparation for the validation to be factored
out from git-rebase--interactive.sh into git-rebase.sh.
The main functional difference is that the pre-rebase hook will no longer
be run if the work tree is dirty.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove directory checks from git-rebase--interactive.sh that are done in
git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the command line processing in git-rebase--interactive.sh
to git-rebase.sh. Store the options in variables in git-rebase.sh and
then source git-rebase--interactive.sh.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure to interpret variables with the same name in the same way in
git-rebase.sh and git-rebase--interactive.sh. This will make it easier
to factor out code from git-rebase.sh to git-rebase--interactive and
export the variables.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase--interactive.sh will soon be sourced from
git-rebase.sh. Align the names of variables used in these scripts to
prepare for that.
Some names in git-rebase--interactive.sh, such as "author_script" and
"amend", are currently used in their upper case form to refer to a
file and in their lower case form to refer to something else. In these
cases, change the name of the existing lower case variable and
downcase the name of the variable that refers to the file.
Currently, git-rebase.sh uses mostly lower case variable names, while
git-rebase--interactive.sh uses mostly upper case variable names. For
consistency, downcase all variables, not just the ones that will be
shared between the two script files.
Helped-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To later be able to use the command line processing in git-rebase.sh
for both interactive and non-interactive rebases, move anything that
is specific to non-interactive rebase outside of the parsing
loop. Keep only parsing and validation of command line options in the
loop.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: clarify in-editor documentation of "exec"
tests: sanitize more git environment variables
fast-import: treat filemodify with empty tree as delete
rebase: give a better error message for bogus branch
rebase: use explicit "--" with checkout
Conflicts:
t/t9300-fast-import.sh
The hints in the current "instruction sheet" template look like so:
# Rebase 3f14246..a1d7e01 onto 3f14246
#
# Commands:
# p, pick = use commit
# r, reword = use commit, but edit the commit message
# e, edit = use commit, but stop for amending
# s, squash = use commit, but meld into previous commit
# f, fixup = like "squash", but discard this commit's log message
# x <cmd>, exec <cmd> = Run a shell command <cmd>, and stop if it fails
#
# If you remove a line here THAT COMMIT WILL BE LOST.
# However, if you remove everything, the rebase will be aborted.
#
This does not make it clear that the format of each line is
<insn> <commit id> <explanatory text that will be printed>
but the reader will probably infer that from the automatically
generated pick examples above it.
What about the "exec" instruction? By analogy, I might imagine that
the format of that line is "exec <command> <explanatory text>", and
the "x <cmd>" hint does not address that question (at first I read it
as taking an argument <cmd> that is the name of a shell). Meanwhile,
the mention of <cmd> makes the hints harder to scan as a table.
So remove the <cmd> and add some words to remind the reader that
"exec" runs a command named by the rest of the line. To make room, it
is left to the manpage to explain that that command is run using
$SHELL and that nonzero status from that command will pause the
rebase.
Wording from Junio.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of a ref/pathname conflict, checkout will
already do the right thing and checkout the ref. However,
for a non-existant ref, this has two advantages:
1. If a file with that pathname exists, rebase will
refresh the file from the index and then rebase the
current branch instead of producing an error.
2. If no such file exists, the error message using an
explicit "--" is better:
# before
$ git rebase -i origin bogus
error: pathspec 'bogus' did not match any file(s) known to git.
Could not checkout bogus
# after
$ git rebase -i origin bogus
fatal: invalid reference: bogus
Could not checkout bogus
The problems seem to be trigger-able only through "git
rebase -i", as regular git-rebase checks the validity of the
branch parameter as a ref very early on. However, it doesn't
hurt to be defensive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Interactive rebase allows the '--verify' option to be passed, but it will
be ignored. Implement proper support for the option for both interactive
and non-interactive rebase by making it override any previous
'--no-verify'.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support lines of the form "fixup! 7a235b" that specify an exact commit
in addition to the normal "squash! Old commit message" form.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current behvaior of --autosquash can duplicate fixup!/squash! lines
if they match multiple commits, and it can also apply them to commits
that come after them in the todo list. Even more oddly, a commit that
looks like "fixup! fixup!" will match itself and be duplicated in the
todo list.
Change the todo list rearranging to mark all commits as used as soon
as they are emitted, and to avoid emitting a fixup/squash commit if the
commit has already been marked as used.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although Git interally has the facility to differentiate between
porcelain and plubmbing commands and appropriately print errors,
several shell scripts invoke plubming commands triggering cryptic
plumbing errors to be displayed on a porcelain interface. This patch
replaces the "needs update" message in git-pull and git-rebase, when
`git update-index` is run, with a more friendly message.
Reported-by: Joshua Jensen <jjensen@workspacewhiz.com>
Reported-by: Thore Husfeldt <thore.husfeldt@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of cut do not cope well with lines that do not end in
an LF. In this case, we can completely avoid cut by using the
${var%% *} parameter expansion (suggested by Brandon Casey).
I found this problem when t3404's "avoid unnecessary reset" failed
due to the "rebase -i" not avoiding updating the tested timestamp.
On a Mac OS X 10.4.11 system:
% printf '%s' 'foo bar' | /usr/bin/cut -d ' ' -f 1
cut: stdin: Illegal byte sequence
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/cherry-revert-message-clean-up:
tests: fix syntax error in "Use advise() for hints" test
cherry-pick/revert: Use advise() for hints
cherry-pick/revert: Use error() for failure message
Introduce advise() to print hints
Eliminate “Finished cherry-pick/revert” message
t3508: add check_head_differs_from() helper function and use it
revert: improve success message by adding abbreviated commit sha1
revert: don't print "Finished one cherry-pick." if commit failed
revert: refactor commit code into a new run_git_commit() function
revert: report success when using option --strategy
* mm/rebase-i-exec:
git-rebase--interactive.sh: use printf instead of echo to print commit message
git-rebase--interactive.sh: rework skip_unnecessary_picks
test-lib: user-friendly alternatives to test [-d|-f|-e]
rebase -i: add exec command to launch a shell command
Conflicts:
git-rebase--interactive.sh
t/t3404-rebase-interactive.sh
Junio C Hamano
Michael J Gruber
Neil Horman
John Keeping
Andrew Wong
Peter Oberndorfer
Matthieu Moy
Jeff King
Martin von Zweigbergk
Jonathan Nieder
Kevin Ballard
Ramkumar Ramachandra
Chris Johnsen