git-svn dcommit exports commits to Subversion, then imports them back
to git again, and last but not least rebases or resets HEAD to the
last of the new commits. I guess this rebasing is convenient when
using just git, but when the commits to be exported are managed by
StGIT, it's really annoying. So add an option to disable this
behavior. And document it, too!
Signed-off-by: Karl Hasselström <kha@treskal.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds a new 'find-rev' command to git-svn that lets you easily
translate between SVN revision numbers and git tree-ish.
Signed-off-by: Adam Roben <aroben@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After reading the leading contents from a symlink data obtained
from subversion, which we expect to begin with 'link ', the code
forked to hash the remainder (which should match readlink()
result) using git-hash-objects, by redirecting its STDIN from
the filehandle we read that 'link ' from. This was Ok with Perl
on modern Linux, but on Mac OS, the read in the parent process
slurped more than we asked for in stdio buffer, and the child
did not correctly see the "remainder".
This attempts to fix the issue by using lower level sysseek and
sysread instead of seek and read to bypass the stdio buffer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Acked-by: Seth Falcon <sethfalcon@gmail.com>
This patch adds a new 'find-rev' command to git-svn that lets you easily
translate between SVN revision numbers and git tree-ish.
Signed-off-by: Adam Roben <aroben@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Usernames don't matter for the purposes of find_by_url, so always remove them
before doing any comparisons.
Signed-off-by: Adam Roben <aroben@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Many functions and operators in perl set $_, so its value cannot be relied upon
after calling arbitrary functions. The solution is simply to copy the value of
$_ into a local variable that will not get overwritten.
Signed-off-by: Adam Roben <aroben@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Adam Roben <aroben@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git only tracks the histories of full directories, not
that of individual files. Sometimes, SVN users will
place[1] a regular file in the directory designated
for subdirectories of branches or tags.
Thanks to jrockway on #git for pointing this out.
[1] mistakenly or otherwise, such as a README
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These are harmless but annoying. They were introduced in
512b620bd9
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When an explicit --revision argument is specified, do not fetch
past the specified range into the beginning of history.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This bug has been around since the the conversion to use the
Git.pm library back in October or November. Eventually I'd like
"git rev-list/log" to have the option to not truncate overly
long messages.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When patches are merged from another git-svn managed branch,
they will have the git-svn-id: metadata line in them (generated
by git-format-patch).
When doing rebase or dcommit via git-svn, this would cause
git-svn to find the wrong upstream branch. We now verify
that the commit is consistent with the value in the .rev_db
file.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git svn log" is the only command that needs the pass-through
option in Getopt::Long; otherwise we will bail out and let the
user know something is wrong.
Also, avoid printing out unaccepted mixed-case options (that
are reserved for the command-line) such as --useSvmProps
in the usage() function.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we're on an invalid HEAD, we should detect this and avoid
attempting to continue.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We ignore errors if the path we're tracking did not exist for
a particular revision range, but we still print out warnings
telling the user about that.
As pointed out by Seth Falcon, this amounts to a lot of warnings
that could confuse and worry users. I'm not entirely comfortable
completely silencing the warnings, but showing one warning per
path that we track should be reasonable.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This should fix fetching for people who did not use
"git svn --minimize" or cannot connect to the repository root
due to the lack of permissions.
I'm not sure what I was on when I made the change to the
rel_path() function in 4e9f6cc78e
that made it die() when we weren't connected to the repository
root :x
Thanks to Sven Verdoolaege for reporting this bug.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This avoids fetching new revisions remotely, and is usefuly
versus plain "git rebase" because the user does not have to
specify which remote head to rebase against.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When using do_switch:
We only need to ensure the index is clean and set to that of the
parent tree) we rely on being able to reconstruct full files
with deltas transferred over the network.
When using do_update:
We may safely unlink the index if we are fetching an entire
new tree with do_update. Having an old index (from a
previously deleted/abandoned directory) around can cause
irrelevant files to be mistakenly kept.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Clearing the pool of the previous SVN::Ra connection we have
seems to to fix mysterious connection dropping errors when
reconnecting to different paths of svn:// repositories hosted by
rubyforge.org.
Note: I'm not sure *why* this fixes things things,
but it does for me.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Several bugs caused this to fail:
* GIT_DIR was set incorrectly after entering the target directory
* Avoid double chdir-ing when clone is called with an explicit path
* create target subdirectory *before* running git-init when using
the multi-init path
Signed-off-by: Eric Wong <normalperson@yhbt.net>
http://foo@blah.com/path is the same as http://blah.com/path, so
remove usernames from URLs before storing them in commits, and when
reading them from commits.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
If we are run inside a subdirectory of a working tree, we'll
chdir to the top first before touching anything. This also
prevents the accidental creation of .git directories inside
subdirectories since they need metadata.
Noticed by maio on #git
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This allows the user to run git-svn show-ignore on there
current HEAD without needing to remember which branch/ref they
branched from with -i. Also, find_by_url should correctly
handle cases where the URL passed to it is not valid.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since the options that affect the way metadata is handled in
git-svn, should be consistently set/unset throughout history
imported by git-svn; it makes sense to allow the user to set
certain options from the command-line that will write to the
config file when initially creating the repository.
Also, fix some formatting issues while we're updating
documentation.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
svm:mirror is not useful at all for us. Parts of the old unit
test were broken and based on my misunderstanding of the
svm:mirror property.
When we read svm:source; make sure we correctly handle the '!'
in it: it is used to separate the path of the repository root
from the virtual path within the repository. We don't need
to make that distinction, honestly!
We also ensure that subdirectories are also mirrored with the
correct URL if we're using useSvmProps.
We have a new test that uses dumped repo that was really
created using SVN::Mirror to avoid ambiguities and
mis-understandings about the svm: properties.
Note: trailing whitespace in the svm.dump file is unfortunately
a reality and required by SVN; so please ignore it when applying
this patch.
Also, ensure that the -R/--remote/--svn-remote flag is always
in effect if explicitly passed via the command-line. This
allows us to track logically different mirrors sharing the
same URL (probably common with SVN::Mirror/SVK users).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This is similar to useSvmProps, but far simpler in
implementation because svnsync retains a 1:1
between revision numbers and relative paths within
the repository
Config keys: svn.useSvnsyncProps
svn-remote.<repo>.useSvnsyncProps
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This feature allows users to create repositories from alternate
URLs. For example, an administrator could run git-svn on the
server locally (accessing via file://) but wish to distribute
the repository with a public http:// or svn:// URL in the
metadata so users of it will see the public URL.
Config key: svn-remote.<remote>.rewriteRoot
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Having it named as 'config' prevents us from tracking a
ref named 'config', which is a huge mistake.
On the non-technical side, the word 'config' implies that
a user can freely modify it; but that's not the case
here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* Fixed logic for renaming old .rev_db -> .rev_db.$uuid
* correctly handle manual migrations for those who decide to
start use globbing to handle branches/tags over individual
'fetch' keys
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This works similarly to 'svn update' or 'git pull' except that
it preserves linear history with 'git rebase' instead of 'git
merge' for ease of dcommit-ing with git-svn.
While we're at it, put the working_head_info() logic
into its own function and allow --fetch-all/--all for
dcommit and rebase (which will fetch all refs in the
current [svn-remote] instead of just the working one).
Note that the '-a' switch (short for --fetch-all/--all) has been
removed as it conflicts with the non-svn 'git fetch'
Signed-off-by: Eric Wong <normalperson@yhbt.net>
On newly-created repositories, 'refs/heads/master' does not
point to anything. This can be confusing to new users; so we
update 'master' to point to the last imported ref after fetching
is done.
Once 'master' is valid; we assume HEAD points to it; and if
the repository is not bare, then checkout the files if the
working tree is clean and unused.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Force the showing of the --minimize flag as an option in the
'migrate' help.
Also, fix the usage function to correctly filter out
the deprecated aliases.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This allows users to use SVM (SVN::Mirror) to mirror a remote
repository to use dcommit to commit to the repository that SVM
was mirroring. When dcommit is used in this manner, the automatic
fetch + rebase/reset does not happen; in which case the user will
have to manually invoke svm/svk, run 'git svn fetch', and finally
'git rebase'.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The newer default value should should lower memory usage for
large fetches and also help with fetching from less reliable
servers. Previously the value was 1000 and memory usage
got a bit high on some repositories and fetching became
less reliable in some cases.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Also, some changes to avoid creating dead dirs under
.git/svn/. We now create all directories as late as
possible.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* avoid skipping modification-only changes in fetch
* correctly fetch when we only have branches and tags
to glob from (no fetch keys defined)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
multi-init is now just an alias that requires -T/-t/-b;
all options that 'init' can now accept.
This will hopefully simplify usage and reduce typing.
Also, allow the --shared option in 'init' to take an optional
argument now that 'git-init --shared' supports an optional
argument.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
multi-fetch is deprecated, "fetch -a" is easier to type
By default, fetch will fetch everything from its default
[svn-remote]; if fetch [--all|-a] is specified, then it will
fetch from all svn remotes. Refspecs on the command-line
(like git-fetch) are not supported.
Also, enable -r/--revision arguments for fetch so
users can shoot themselves in the foot^W^W^W^W^W
skip some history and do the equivalent of a shallow
clone/fetch they're not interested in.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Similar in spirit to the recent dcommit change, we now
look at 'HEAD' by default to look for a GIT_SVN_ID
so the user won't have to pass -i <GIT_SVN_ID> argument.
We are also more tolerant of of people passing bare remote names
as a result (just $GIT_SVN_ID without the -i)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Merge commits can be created when following certain parents,
(most notably 'R' cases) and we definitely don't want to exclude
them.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* dcommit no longer requires the correct -i/GIT_SVN_ID option
passed to it. Since you're committing from HEAD (or another
commit that is a parent of HEAD), you'll be able to find
a commit with metadata information containing the SVN URL
that your HEAD was descended from anyways.
* I don't think dcommit ever worked for people using the
noMetadata option; so I don't think relying on metadata
is an issue.
* useSvmProps users shouldn't commit to SVN::Mirror created
repositories anyways, right?
* Users of globbing should automatically be able to commit
to paths that are not explicitly set in .git/config
Signed-off-by: Eric Wong <normalperson@yhbt.net>
multi-init did not write a svn-remote.<remote>.url config
entry without a --trunk argument.
Also, The svm:mirror property is used by SVN::Mirror to track
the path of the repository that we are mirroring. We need to
append that to the source (which is (presumably) just the URL of
the repository root).
Lastly, we now look harder for svm:(source|mirror|uuid) properties
in sub and parent directories. Since our relative path could
be tweaked.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Even if nothing touched paths we care about in a fetch;
increment the maxRev like we do with rev_db since
we don't like having to run get_log on revisions we've
seen before.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We need a separate .rev_db file for each repository we're
tracking. This allows us to track the same logical path off
multiple mirrors. We preserve a symlink to the old .rev_db
(no-UUID) if we're (auto-)migrating from an old version to
preserve backwards compatibility.
Also, get rid of the uuid() wrapper since we cache UUID in our
private config, and the SVN::Ra::get_uuid() function memoizes
the return value per-connection.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Make sure we flush our userspace buffers and and fsync(2)
.rev_db information to disk if we use these options because
we really don't want to lose this information.
Also, disallow --use-svm-props and --no-metadata from the
command-line because history will be inconsistent if they're
only used occasionally. If a user wants to use these options,
they must be set in the config so they're always on.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Karl Hasselström
Adam Roben
Junio C Hamano
Eric Wong
Sam Vilain