Expose the `config_set` C API as a set of simple commands in order to
facilitate testing. Add tests for the `config_set` API as well as for
`git_config_get_*()` family for the usual config files.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kb/perf-trace:
api-trace.txt: add trace API documentation
progress: simplify performance measurement by using getnanotime()
wt-status: simplify performance measurement by using getnanotime()
git: add performance tracing for git's main() function to debug scripts
trace: add trace_performance facility to debug performance issues
trace: add high resolution timer function to debug performance issues
trace: add 'file:line' to all trace output
trace: move code around, in preparation to file:line output
trace: add current timestamp to all trace output
trace: disable additional trace output for unit tests
trace: add infrastructure to augment trace output with additional info
sha1_file: change GIT_TRACE_PACK_ACCESS logging to use trace API
Documentation/git.txt: improve documentation of 'GIT_TRACE*' variables
trace: improve trace performance
trace: remove redundant printf format attribute
trace: consistently name the format parameter
trace: move trace declarations from cache.h to new trace.h
* ak/profile-feedback-build:
Fix profile feedback with -jN and add profile-fast
Run the perf test suite for profile feedback too
Don't define away __attribute__ on gcc
Use BASIC_FLAGS for profile feedback
An experiment to use two files (the base file and incremental
changes relative to it) to represent the index to reduce I/O cost
of rewriting a large index when only small part of the working tree
changes.
* nd/split-index: (32 commits)
t1700: new tests for split-index mode
t2104: make sure split index mode is off for the version test
read-cache: force split index mode with GIT_TEST_SPLIT_INDEX
read-tree: note about dropping split-index mode or index version
read-tree: force split-index mode off on --index-output
rev-parse: add --shared-index-path to get shared index path
update-index --split-index: do not split if $GIT_DIR is read only
update-index: new options to enable/disable split index mode
split-index: strip pathname of on-disk replaced entries
split-index: do not invalidate cache-tree at read time
split-index: the reading part
split-index: the writing part
read-cache: mark updated entries for split index
read-cache: save deleted entries in split index
read-cache: mark new entries for split index
read-cache: split-index mode
read-cache: save index SHA-1 after reading
entry.c: update cache_changed if refresh_cache is set in checkout_entry()
cache-tree: mark istate->cache_changed on prime_cache_tree()
cache-tree: mark istate->cache_changed on cache tree update
...
Add a getnanotime() function that returns nanoseconds since 01/01/1970 as
unsigned 64-bit integer (i.e. overflows in july 2554). This is easier to
work with than e.g. struct timeval or struct timespec. Basing the timer on
the epoch allows using the results with other time-related APIs.
To simplify adaption to different platforms, split the implementation into
a common getnanotime() and a platform-specific highres_nanos() function.
The common getnanotime() function handles errors, falling back to
gettimeofday() if highres_nanos() isn't implemented or doesn't work.
getnanotime() is also responsible for normalizing to the epoch. The offset
to the system clock is calculated only once on initialization, i.e.
manually setting the system clock has no impact on the timer (except if
the fallback gettimeofday() is in use). Git processes are typically short
lived, so we don't need to handle clock drift.
The highres_nanos() function returns monotonically increasing nanoseconds
relative to some arbitrary point in time (e.g. system boot), or 0 on
failure. Providing platform-specific implementations should be relatively
easy, e.g. adapting to clock_gettime() as defined by the POSIX realtime
extensions is seven lines of code.
This version includes highres_nanos() implementations for:
* Linux: using clock_gettime(CLOCK_MONOTONIC)
* Windows: using QueryPerformanceCounter()
Todo:
* enable clock_gettime() on more platforms
* add Mac OSX version, e.g. using mach_absolute_time + mach_timebase_info
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Profile feedback always failed for me with -jN. The problem
was that there was no implicit ordering between the profile generate
stage and the profile use stage. So some objects in the later stage
would be linked with profile generate objects, and fail due
to the missing -lgcov.
This adds a new profile target that implicitely enforces the
correct ordering by using submakes. Plus a profile-install target
to also install. This is also nicer to type that PROFILE=...
Plus I always run the performance test suite now for the full
profile run.
In addition I also added a profile-fast / profile-fast-install
target the only runs the performance test suite instead of the
whole test suite. This significantly speeds up the profile build,
which was totally dominated by test suite run time. However
it may have less coverage of course.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use BASIC_CFLAGS instead of CFLAGS to set up the profile feedback
option in the Makefile.
This allows still overriding CFLAGS on the make command line
without disabling profile feedback.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit signatures can be verified using "git show -s --show-signature"
or the "%G?" pretty format and parsing the output, which is well suited
for user inspection, but not for scripting.
Provide a command "verify-commit" which is analogous to "verify-tag": It
returns 0 for good signatures and non-zero otherwise, has the gpg output
on stderr and (optionally) the commit object on stdout, sans the
signature, just like "verify-tag" does.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This split-index mode is designed to keep write cost proportional to
the number of changes the user has made, not the size of the work
tree. (Read cost is another matter, to be dealt separately.)
This mode stores index info in a pair of $GIT_DIR/index and
$GIT_DIR/sharedindex.<SHA-1>. sharedindex is large and unchanged over
time while "index" is smaller and updated often. Format details are in
index-format.txt, although not everything is implemented in this
patch.
Shared indexes are not automatically removed, because it's unclear if
the shared index is needed by any (even temporary) indexes by just
looking at it. After a while you'll collect stale shared indexes. The
good news is one shared index is useable for long, until
$GIT_DIR/index becomes too big and sluggish that the new shared index
must be created.
The safest way to clean shared indexes is to turn off split index
mode, so shared files are all garbage, delete them all, then turn on
split index mode again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the logic to compute the display width needed for utf8
strings and allow us to more easily maintain the tables used in
that logic.
We may want to let the users choose if codepoints with ambiguous
widths are treated as a double or single width in a follow-up patch.
* tb/unicode-6.3-zero-width:
utf8: make it easier to auto-update git_wcwidth()
utf8.c: use a table for double_width
Enable threaded index-pack on platforms without thread-unsafe
pread() emulation.
* nd/index-pack-one-fd-per-thread:
index-pack: work around thread-unsafe pread()
Instead of running N pair-wise diff-trees when inspecting a
N-parent merge, find the set of paths that were touched by walking
N+1 trees in parallel. These set of paths can then be turned into
N pair-wise diff-tree results to be processed through rename
detections and such. And N=2 case nicely degenerates to the usual
2-way diff-tree, which is very nice.
* ks/tree-diff-nway:
mingw: activate alloca
combine-diff: speed it up, by using multiparent diff tree-walker directly
tree-diff: rework diff_tree() to generate diffs for multiparent cases as well
Portable alloca for Git
tree-diff: reuse base str(buf) memory on sub-tree recursion
tree-diff: no need to call "full" diff_tree_sha1 from show_path()
tree-diff: rework diff_tree interface to be sha1 based
tree-diff: diff_tree() should now be static
tree-diff: remove special-case diff-emitting code for empty-tree cases
tree-diff: simplify tree_entry_pathcmp
tree-diff: show_path prototype is not needed anymore
tree-diff: rename compare_tree_entry -> tree_entry_pathcmp
tree-diff: move all action-taking code out of compare_tree_entry()
tree-diff: don't assume compare_tree_entry() returns -1,0,1
tree-diff: consolidate code for emitting diffs and recursion in one place
tree-diff: show_tree() is not needed
tree-diff: no need to pass match to skip_uninteresting()
tree-diff: no need to manually verify that there is no mode change for a path
combine-diff: move changed-paths scanning logic into its own function
combine-diff: move show_log_first logic/action out of paths scanning
The function git_wcwidth() returns for a given unicode code point the
width on the display:
-1 for control characters,
0 for combining or other non-visible code points
1 for e.g. ASCII
2 for double-width code points.
This table had been originally been extracted for one Unicode
version, probably 3.2.
We now use two tables these days, one for zero-width and another for
double-width. Make it easier to update these tables to a later
version of Unicode by factoring out the table from utf8.c into
unicode_width.h and add the script update_unicode.sh to update the
table based on the latest Unicode specification files.
Thanks to Peter Krefting <peter@softwolves.pp.se> and Kevin Bracey
<kevin@bracey.fi> for helping with their Unicode knowledge.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It turns out that some platforms do ship without curl-config even
though they build with the hardcoded default -lcurl and rely on it
to work.
* db/make-with-curl:
Makefile: default to -lcurl when no CURL_CONFIG or CURLDIR
The original implementation of CURL_CONFIG support did not match the
original behavior of using -lcurl when CURLDIR was not set. This broke
implementations that were lacking curl-config but did have libcurl
installed along system libraries, such as MSysGit. In other words, the
assumption that curl-config is always installed was incorrect.
Instead, if CURL_CONFIG is empty or returns an empty result (e.g. due
to curl-config being missing), use the old behavior of falling back to
-lcurl.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ask curl-config how to link with the curl library, instead of
having only a limited configurability knobs in the Makefile.
* db/make-with-curl:
Makefile: allow static linking against libcurl
Makefile: use curl-config to determine curl flags
When extract l10n messages, we use "--add-comments" option to keep
comments right above the l10n messages for references. But sometimes
irrelevant comments are also extracted. For example in the following
code block, the comment in line 2 will be extracted as comment for the
l10n message in line 3, but obviously it's wrong.
{ OPTION_CALLBACK, 0, "ignore-removal", &addremove_explicit,
NULL /* takes no arguments */,
N_("ignore paths removed in the working tree (same as
--no-all)"),
PARSE_OPT_NOARG, ignore_removal_cb },
Since almost all comments for l10n translators are marked with the same
prefix (tag): "TRANSLATORS:", it's safe to only extract comments with
this special tag. I.E. it's better to call xgettext as:
xgettext --add-comments=TRANSLATORS: ...
Also tweaks the multi-line comment in "init-db.c", to make it start with
the proper tag, not "* TRANSLATORS:" (which has a star before the tag).
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multi-threaing of index-pack was disabled with c0f8654
(index-pack: Disable threading on cygwin - 2012-06-26), because
pread() implementations for Cygwin and MSYS were not thread
safe. Recent Cygwin does offer usable pread() and we enabled
multi-threading with 103d530f (Cygwin 1.7 has thread-safe pread,
2013-07-19).
Work around this problem on platforms with a thread-unsafe
pread() emulation by opening one file handle per thread; it
would prevent parallel pread() on different file handles from
stepping on each other.
Also remove NO_THREAD_SAFE_PREAD that was introduced in c0f8654
because it's no longer used anywhere.
This workaround is unconditional, even for platforms with
thread-safe pread() because the overhead is small (a couple file
handles more) and not worth fragmenting the code.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires more flags than can be guessed with the old-style
CURLDIR and related options, so is only supported when curl-config is
present.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
curl-config should always be installed alongside a curl distribution,
and its purpose is to provide flags for building against libcurl, so
use it instead of guessing flags and dependent libraries.
Allow overriding CURL_CONFIG to a custom path to curl-config, to
compile against a curl installation other than the first in PATH.
Depending on the set of features curl is compiled with, there may be
more libraries required than the previous two options of -lssl and
-lidn. For example, with a vanilla build of libcurl-7.36.0 on Mac OS X
10.9:
$ ~/d/curl-out-7.36.0/lib/curl-config --libs
-L/Users/dborowitz/d/curl-out-7.36.0/lib -lcurl -lgssapi_krb5 -lresolv -lldap -lz
Use this only when CURLDIR is not explicitly specified, to continue
supporting older builds.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eradicate mistaken use of "nor" (that is, essentially "nor" used
not in "neither A nor B" ;-)) from in-code comments, command output
strings, and documentations.
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
Most gmtime implementations return a NULL value when they
encounter an error (and this behavior is specified by ANSI C
and POSIX). FreeBSD's implementation, however, will simply
leave the "struct tm" untouched. Let's also recognize this
and convert it to a NULL (with this patch, t4212 should pass
on FreeBSD).
Reported-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch we'll have to use alloca() for performance reasons,
but since alloca is non-standardized and is not portable, let's have a
trick with compatibility wrappers:
1. at configure time, determine, do we have working alloca() through
alloca.h, and define
#define HAVE_ALLOCA_H
if yes.
2. in code
#ifdef HAVE_ALLOCA_H
# include <alloca.h>
# define xalloca(size) (alloca(size))
# define xalloca_free(p) do {} while(0)
#else
# define xalloca(size) (xmalloc(size))
# define xalloca_free(p) (free(p))
#endif
and use it like
func() {
p = xalloca(size);
...
xalloca_free(p);
}
This way, for systems, where alloca is available, we'll have optimal
on-stack allocations with fast executions. On the other hand, on
systems, where alloca is not available, this gracefully fallbacks to
xmalloc/free.
Both autoconf and config.mak.uname configurations were updated. For
autoconf, we are not bothering considering cases, when no alloca.h is
available, but alloca() works some other way - its simply alloca.h is
available and works or not, everything else is deep legacy.
For config.mak.uname, I've tried to make my almost-sure guess for where
alloca() is available, but since I only have access to Linux it is the
only change I can be sure about myself, with relevant to other changed
systems people Cc'ed.
NOTE
SunOS and Windows had explicit -DHAVE_ALLOCA_H in their configurations.
I've changed that to now-common HAVE_ALLOCA_H=YesPlease which should be
correct.
Cc: Brandon Casey <drafnel@gmail.com>
Cc: Marius Storm-Olsen <mstormo@gmail.com>
Cc: Johannes Sixt <j6t@kdbg.org>
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Cc: Gerrit Pape <pape@smarden.org>
Cc: Petr Salinger <Petr.Salinger@seznam.cz>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Thomas Schwinge <thomas@codesourcery.com> (GNU Hurd changes)
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tg/index-v4-format:
read-cache: add index.version config variable
test-lib: allow setting the index format version
introduce GIT_INDEX_VERSION environment variable
We started using wildmatch() in place of fnmatch(3); complete the
process and stop using fnmatch(3).
* nd/no-more-fnmatch:
actually remove compat fnmatch source code
stop using fnmatch (either native or compat)
Revert "test-wildmatch: add "perf" command to compare wildmatch and fnmatch"
use wildmatch() directly without fnmatch() wrapper
--sort=version:refname (or --sort=v:refname for short) sorts tags as
if they are versions. --sort=-refname reverses the order (with or
without ":version").
versioncmp() is copied from string/strverscmp.c in glibc commit
ee9247c38a8def24a59eb5cfb7196a98bef8cfdc, reformatted to Git coding
style. The implementation is under LGPL-2.1 and according to [1] I can
relicense it to GPLv2.
[1] http://www.gnu.org/licenses/gpl-faq.html#AllCompatibility
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Borrow the bitmap index into packfiles from JGit to speed up
enumeration of objects involved in a commit range without having to
fully traverse the history.
* jk/pack-bitmap: (26 commits)
ewah: unconditionally ntohll ewah data
ewah: support platforms that require aligned reads
read-cache: use get_be32 instead of hand-rolled ntoh_l
block-sha1: factor out get_be and put_be wrappers
do not discard revindex when re-preparing packfiles
pack-bitmap: implement optional name_hash cache
t/perf: add tests for pack bitmaps
t: add basic bitmap functionality tests
count-objects: recognize .bitmap in garbage-checking
repack: consider bitmaps when performing repacks
repack: handle optional files created by pack-objects
repack: turn exts array into array-of-struct
repack: stop using magic number for ARRAY_SIZE(exts)
pack-objects: implement bitmap writing
rev-list: add bitmap mode to speed up object lists
pack-objects: use bitmaps when packing objects
pack-objects: split add_object_entry
pack-bitmap: add support for bitmap indexes
documentation: add documentation for the bitmap format
ewah: compressed bitmap implementation
...
Improvements to our hash table to get it to meet the needs of the
msysgit fscache project, with some nice performance improvements.
* kb/fast-hashmap:
name-hash: retire unused index_name_exists()
hashmap.h: use 'unsigned int' for hash-codes everywhere
test-hashmap.c: drop unnecessary #includes
.gitignore: test-hashmap is a generated file
read-cache.c: fix memory leaks caused by removed cache entries
builtin/update-index.c: cleanup update_one
fix 'git update-index --verbose --again' output
remove old hash.[ch] implementation
name-hash.c: remove cache entries instead of marking them CE_UNHASHED
name-hash.c: use new hash map implementation for cache entries
name-hash.c: remove unreferenced directory entries
name-hash.c: use new hash map implementation for directories
diffcore-rename.c: use new hash map implementation
diffcore-rename.c: simplify finding exact renames
diffcore-rename.c: move code around to prepare for the next patch
buitin/describe.c: use new hash map implementation
add a hashtable implementation that supports O(1) removal
submodule: don't access the .gitmodules cache entry after removing it
Allow adding a TEST_GIT_INDEX_VERSION variable to config.mak to set the
index version with which the test suite should be run.
If it isn't set, the default version given in the source code is
used (currently version 3).
To avoid breakages with index versions other than [23], also set the
index version under which t2104 is run to 3. This test only tests
functionality specific to version 2 and 3 of the index file and would
fail if the test suite is run with any other version.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.8.4 (about six months ago) wildmatch is used as default
replacement for fnmatch. We have seen only one fix since so wildmatch
probably has done a good job as fnmatch replacement. This concludes
the fnmatch->wildmatch transition by no longer relying on fnmatch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
revision.o is included in libgit.a which is in $(GITLIBS), so we don't
need to include is separately. This fixes compilation with
"-fwhole-program" which otherwise fails with messages like this:
libgit.a(revision.o): In function `mark_tree_uninteresting':
/home/john/src/git/revision.c:108: multiple definition of `mark_tree_uninteresting'
/tmp/ccKQRkZV.ltrans2.ltrans.o:/home/john/src/git/revision.c:108: first defined here
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the git version number consists of less than three period
separated numbers, then the Windows resource file compilation
issues a syntax error:
$ touch git.rc
$ make V=1 git.res
GIT_VERSION = 1.9.rc0
windres -O coff \
-DMAJOR=1 -DMINOR=9 -DPATCH=rc0 \
-DGIT_VERSION="\\\"1.9.rc0\\\"" git.rc -o git.res
C:\msysgit\msysgit\mingw\bin\windres.exe: git.rc:2: syntax error
make: *** [git.res] Error 1
$
Note that -DPATCH=rc0.
The values passed via -DMAJOR=, -DMINOR=, and -DPATCH= are used in
FILEVERSION and PRODUCTVERSION statements, which expect up to four numeric
values. These version numbers are intended for machine consumption. They
are typically inspected by installers to decide whether a file to be
installed is newer than one that exists on the system, but are not used
for much else.
We can be pretty certain that there are no tools that look at these
version numbers, not even the installer of Git for Windows does.
Therefore, to fix the syntax error, fill in only the first two numbers,
which we are guaranteed to find in Git version numbers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bitmap index is a `.bitmap` file that can be found inside
`$GIT_DIR/objects/pack/`, next to its corresponding packfile, and
contains precalculated reachability information for selected commits.
The full specification of the format for these bitmap indexes can be found
in `Documentation/technical/bitmap-format.txt`.
For a given commit SHA1, if it happens to be available in the bitmap
index, its bitmap will represent every single object that is reachable
from the commit itself. The nth bit in the bitmap is the nth object in
the packfile; if it's set to 1, the object is reachable.
By using the bitmaps available in the index, this commit implements
several new functions:
- `prepare_bitmap_git`
- `prepare_bitmap_walk`
- `traverse_bitmap_commit_list`
- `reuse_partial_packfile_from_bitmap`
The `prepare_bitmap_walk` function tries to build a bitmap of all the
objects that can be reached from the commit roots of a given `rev_info`
struct by using the following algorithm:
- If all the interesting commits for a revision walk are available in
the index, the resulting reachability bitmap is the bitwise OR of all
the individual bitmaps.
- When the full set of WANTs is not available in the index, we perform a
partial revision walk using the commits that don't have bitmaps as
roots, and limiting the revision walk as soon as we reach a commit that
has a corresponding bitmap. The earlier OR'ed bitmap with all the
indexed commits can now be completed as this walk progresses, so the end
result is the full reachability list.
- For revision walks with a HAVEs set (a set of commits that are deemed
uninteresting), first we perform the same method as for the WANTs, but
using our HAVEs as roots, in order to obtain a full reachability bitmap
of all the uninteresting commits. This bitmap then can be used to:
a) limit the subsequent walk when building the WANTs bitmap
b) finding the final set of interesting commits by performing an
AND-NOT of the WANTs and the HAVEs.
If `prepare_bitmap_walk` runs successfully, the resulting bitmap is
stored and the equivalent of a `traverse_commit_list` call can be
performed by using `traverse_bitmap_commit_list`; the bitmap version
of this call yields the objects straight from the packfile index
(without having to look them up or parse them) and hence is several
orders of magnitude faster.
As an extra optimization, when `prepare_bitmap_walk` succeeds, the
`reuse_partial_packfile_from_bitmap` call can be attempted: it will find
the amount of objects at the beginning of the on-disk packfile that can
be reused as-is, and return an offset into the packfile. The source
packfile can then be loaded and the bytes up to `offset` can be written
directly to the result without having to consider the entires inside the
packfile individually.
If the `prepare_bitmap_walk` call fails (e.g. because no bitmap files
are available), the `rev_info` struct is left untouched, and can be used
to perform a manual rev-walk using `traverse_commit_list`.
Hence, this new set of functions are a generic API that allows to
perform the equivalent of
git rev-list --objects [roots...] [^uninteresting...]
for any set of commits, even if they don't have specific bitmaps
generated for them.
In further patches, we'll use this bitmap traversal optimization to
speed up the `pack-objects` and `rev-list` commands.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
EWAH is a word-aligned compressed variant of a bitset (i.e. a data
structure that acts as a 0-indexed boolean array for many entries).
It uses a 64-bit run-length encoding (RLE) compression scheme,
trading some compression for better processing speed.
The goal of this word-aligned implementation is not to achieve
the best compression, but rather to improve query processing time.
As it stands right now, this EWAH implementation will always be more
efficient storage-wise than its uncompressed alternative.
EWAH arrays will be used as the on-disk format to store reachability
bitmaps for all objects in a repository while keeping reasonable sizes,
in the same way that JGit does.
This EWAH implementation is a mostly straightforward port of the
original `javaewah` library that JGit currently uses. The library is
self-contained and has been embedded whole (4 files) inside the `ewah`
folder to ease redistribution.
The library is re-licensed under the GPLv2 with the permission of Daniel
Lemire, the original author. The source code for the C version can
be found on GitHub:
https://github.com/vmg/libewok
The original Java implementation can also be found on GitHub:
https://github.com/lemire/javaewah
[jc: stripped debug-only code per Peff's $gmane/239768]
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the built-in "git tar-tree" command (a thin wrapper around "git
archive") was removed in 925ceccf (tar-tree: remove deprecated
command, 2013-11-10), the build continued to install a non-functioning
git-tar-tree command in gitexecdir by mistake:
$ PATH=$(git --exec-path):$PATH
$ git-tar-tree -h
fatal: cannot handle tar-tree internally
The list of links in gitexecdir is populated from BUILTIN_OBJS, which
includes builtin/tar-tree.o to implement "git get-tar-commit-id".
Rename the get-tar-commit-id source file to builtin/get-tar-commit-id.c
to reflect its purpose and fix 'make install'.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms ship Perl modules used by git scripts outside the
default perl path (e.g., on Mac OS X, Subversion's perl bindings live
in a separate xcode perl path). Add an PERLLIB_EXTRA variable to hold
a colon-separated list of extra directories to add to the perl path in
git's scripts, as a convenience for packagers.
Requested-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing hashtable implementation (in hash.[ch]) uses open addressing
(i.e. resolve hash collisions by distributing entries across the table).
Thus, removal is difficult to implement with less than O(n) complexity.
Resolving collisions of entries with identical hashes (e.g. via chaining)
is left to the client code.
Add a hashtable implementation that supports O(1) removal and is slightly
easier to use due to builtin entry chaining.
Supports all basic operations init, free, get, add, remove and iteration.
Also includes ready-to-use hash functions based on the public domain FNV-1
algorithm (http://www.isthe.com/chongo/tech/comp/fnv).
The per-entry data structure (hashmap_entry) is piggybacked in front of
the client's data structure to save memory. See test-hashmap.c for usage
examples.
The hashtable is resized by a factor of four when 80% full. With these
settings, average memory consumption is about 2/3 of hash.[ch], and
insertion is about twice as fast due to less frequent resizing.
Lookups are also slightly faster, because entries are strictly confined to
their bucket (i.e. no data of other buckets needs to be traversed).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tanay Abhra
Junio C Hamano
Karsten Blees
Andi Kleen
Michael J Gruber
Nguyễn Thái Ngọc Duy
Torsten Bögershausen
Dave Borowitz
Jiang Xin
Jeff King
Justin Lebar
Kirill Smelkov
Дилян Палаузов
Thomas Gummerer
John Keeping
Johannes Sixt
Vicent Marti
Jonathan Nieder