This script was added in f28ac70f48 (Move all dashed-form commands to
libexecdir, 2007-11-28) when commands such as "git-add" lived in the
bin directory, instead of the git exec directory.
This notice helped someone incorrectly installing version v1.6.0 and
later into a directory built for a pre-v1.6.0 git version.
We're now long past the point where anyone who'd be helped by this
warning is likely to be doing that, so let's just remove this check
and warning to simplify the Makefile.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in my c95e3a3f0b (send-email: move trivial config
handling to Perl, 2021-05-28) where we'd pick the first config key out
of multiple defined ones, instead of using the normal "last key wins"
semantics of "git config --get".
This broke e.g. cases where a .git/config would have a different
sendemail.smtpServer than ~/.gitconfig. We'd pick the ~/.gitconfig
over .git/config, instead of preferring the repository-local
version. The same would go for /etc/gitconfig etc.
The full list of impacted config keys (the %config_settings values
which are references to scalars, not arrays) is:
sendemail.smtpencryption
sendemail.smtpserver
sendemail.smtpserverport
sendemail.smtpuser
sendemail.smtppass
sendemail.smtpdomain
sendemail.smtpauth
sendemail.smtpbatchsize
sendemail.smtprelogindelay
sendemail.tocmd
sendemail.cccmd
sendemail.aliasfiletype
sendemail.envelopesender
sendemail.confirm
sendemail.from
sendemail.assume8bitencoding
sendemail.composeencoding
sendemail.transferencoding
sendemail.sendmailcmd
I.e. having any of these set in say ~/.gitconfig and in-repo
.git/config regressed in v2.33.0 to prefer the --global one over the
--local.
To test this add a test of config priority to one of these config
variables, most don't have tests at all, but there was an existing one
for sendemail.8bitEncoding.
The "git config" (instead of "test_config") is somewhat of an
anti-pattern, but follows established conventions in
t9001-send-email.sh, likewise with any other pattern or idiom in this
test.
The populating of home/.gitconfig and setting of HOME= is copied from
a test in t0017-env-helper.sh added in 1ff750b128 (tests: make
GIT_TEST_GETTEXT_POISON a boolean, 2019-06-21). This test fails
without this bugfix, but now it works.
Reported-by: Eli Schwartz <eschwartz@archlinux.org>
Tested-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
output() reuses the same struct diff_options for multiple calls of
diff_flush(). Set the option no_free to instruct it to keep the
ignore regexes between calls and release them explicitly at the end.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes 19b2517f (diff-merges: move specific diff-index "-m"
handling to diff-index, 2021-05-21).
That commit disabled handling of all diff for merges options in
diff-index on an assumption that they are unused. However, it later
appeared that -c and --cc, even though undocumented and not being
covered by tests, happen to have had particular effect on diff-index
output.
Restore original -c/--cc options handling by diff-index.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2f732bf15e (tr2: log parent process name, 2021-07-21) we started
logging parent process names, but only logged all parents on Windows.
on Linux only the name of the immediate parent process was logged.
Extend the functionality added there to also log full parent chain on
Linux.
This requires us to lookup "/proc/<getppid()>/stat" instead of
"/proc/<getppid()>/comm". The "comm" file just contains the name of the
process, but the "stat" file has both that information, and the parent
PID of that process, see procfs(5). We parse out the parent PID of our
own parent, and recursively walk the chain of "/proc/*/stat" files all
the way up the chain. A parent PID of 0 indicates the end of the
chain.
It's possible given the semantics of Linux's PID files that we end up
getting an entirely nonsensical chain of processes. It could happen if
e.g. we have a chain of processes like:
1 (init) => 321 (bash) => 123 (git)
Let's assume that "bash" was started a while ago, and that as shown
the OS has already cycled back to using a lower PID for us than our
parent process. In the time it takes us to start up and get to
trace2_collect_process_info(TRACE2_PROCESS_INFO_STARTUP) our parent
process might exit, and be replaced by an entirely different process!
We'd racily look up our own getppid(), but in the meantime our parent
would exit, and Linux would have cycled all the way back to starting
an entirely unrelated process as PID 321.
If that happens we'll just silently log incorrect data in our ancestry
chain. Luckily we don't need to worry about this except in this
specific cycling scenario, as Linux does not have PID
randomization. It appears it once did through a third-party feature,
but that it was removed around 2006[1]. For anyone worried about this
edge case raising PID_MAX via "/proc/sys/kernel/pid_max" will mitigate
it, but not eliminate it.
One thing we don't need to worry about is getting into an infinite
loop when walking "/proc/*/stat". See 353d3d77f4 (trace2: collect
Windows-specific process information, 2019-02-22) for the related
Windows code that needs to deal with that, and [2] for an explanation
of that edge case.
Aside from potential race conditions it's also a bit painful to
correctly parse the process name out of "/proc/*/stat". A simpler
approach is to use fscanf(), see [3] for an implementation of that,
but as noted in the comment being added here it would fail in the face
of some weird process names, so we need our own parse_proc_stat() to
parse it out.
With this patch the "ancestry" chain for a trace2 event might look
like this:
$ GIT_TRACE2_EVENT=/dev/stdout ~/g/git/git version | grep ancestry | jq -r .ancestry
[
"bash",
"screen",
"systemd"
]
And in the case of naughty process names like the following. This uses
perl's ability to use prctl(PR_SET_NAME, ...). See
Perl/perl5@7636ea95c5 (Set the legacy process name with prctl() on
assignment to $0 on Linux, 2010-04-15)[4]:
$ perl -e '$0 = "(naughty\nname)"; system "GIT_TRACE2_EVENT=/dev/stdout ~/g/git/git version"' | grep ancestry | jq -r .ancestry
[
"sh",
"(naughty\nname)",
"bash",
"screen",
"systemd"
]
1. https://grsecurity.net/news#grsec2110
2. https://lore.kernel.org/git/48a62d5e-28e2-7103-a5bb-5db7e197a4b9@jeffhostetler.com/
3. https://lore.kernel.org/git/87o8agp29o.fsf@evledraar.gmail.com/
4. 7636ea95c5
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code added in 2f732bf15e (tr2: log parent process name,
2021-07-21) to use a switch statement without a "default" branch to
have the compiler error if this code ever drifts out of sync with the
members of the "enum trace2_process_info_reason".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a subsequent commit I'll be replacing most of this code to log N
parents, but let's first fix bugs introduced in the recent
2f732bf15e (tr2: log parent process name, 2021-07-21).
It was using the strbuf_read_file() in the wrong way, its return value
is either a length or a negative value on error. If we didn't have a
procfs, or otherwise couldn't access it we'd end up pushing an empty
string to the trace2 ancestry array.
It was also using the strvec_push() API the wrong way. That API always
does an xstrdup(), so by detaching the strbuf here we'd leak
memory. Let's instead pass in our pointer for strvec_push() to
xstrdup(), and then free our own strbuf. I do have some WIP changes to
make strvec_push_nodup() non-static, which makes this and some other
callsites nicer, but let's just follow the prevailing pattern of using
strvec_push() for now.
We'll also need to free that "procfs_path" strbuf whether or not
strbuf_read_file() succeeds, which was another source of memory leaks
in 2f732bf15e, i.e. we'd leak that memory as well if we weren't on a
system where we could read the file from procfs.
Let's move all the freeing of the memory to the end of the
function. If we're still at STRBUF_INIT with "name" due to not having
taken the branch where the strbuf_read_file() succeeds freeing it is
redundant. So we could move it into the body of the "if", but just
handling freeing the same way for all branches of the function makes
it more readable.
In combination with the preceding commit this makes all of
t[0-9]*trace2*.sh pass under SANITIZE=leak on Linux.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in ee4512ed48 (trace2: create new
combined trace facility, 2019-02-22), we were doing a free() of other
memory allocated in tr2tls_create_self(), but not the "thread_name"
"struct strbuf".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite a comment added in 2f732bf15e (tr2: log parent process name,
2021-07-21) to describe what we might do under
TRACE2_PROCESS_INFO_EXIT in the future, instead of vaguely referring
to "something extra".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I'm fairly sure that there is no way on Linux to inspect the process
tree without using procfs, any tool such as ps(1), top(1) etc. that
shows this sort of information ultimately looks the information up in
procfs.
So let's remove this comment added in 2f732bf15e (tr2: log parent
process name, 2021-07-21), it's setting us up for an impossible task.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "unbundle" command added in 2e0afafebd (Add git-bundle: move
objects and references by archive, 2007-02-22) did not show progress
output, even though the underlying API learned how to show progress in
be042aff24 (Teach progress eye-candy to fetch_refs_from_bundle(),
2011-09-18).
Now we'll show "Unbundling objects" using the new --progress-title
option to "git index-pack", to go with its existing "Receiving
objects" and "Indexing objects" (which it shows when invoked with
"--stdin", and with a pack file, respectively).
Unlike "git bundle create" we don't handle "--quiet" here, nor
"--all-progress" and "--all-progress-implied". Those are all specific
to "create" (and "verify", in the case of "--quiet").
The structure of the existing documentation is a bit unclear, e.g. the
documentation for the "--quiet" option added in
79862b6b77 (bundle-create: progress output control, 2019-11-10) only
describes how it works for "create", and not for "verify". That and
other issues in it should be fixed, but I'd like to avoid untangling
that mess right now. Let's just support the standard "--no-progress"
implicitly here, and leave cleaning up the general behavior of "git
bundle" for a later change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --progress-title option to index-pack, when data is piped into
index-pack its progress is a proxy for whatever's feeding it data.
This option will allow us to set a more relevant progress bar title in
"git bundle unbundle", and is also used in my "bundle-uri" RFC
patches[1] by a new caller in fetch-pack.c.
The code change in cmd_index_pack() won't handle
"--progress-title=xyz", only "--progress-title xyz", and the "(i+1)"
style (as opposed to "i + 1") is a bit odd.
Not using the "--long-option=value" style is inconsistent with
existing long options handled by cmd_index_pack(), but makes the code
that needs to call it better (two strvec_push(), instead of needing a
strvec_pushf()). Since the option is internal-only the inconsistency
shouldn't matter.
I'm copying the pattern to handle it as-is from the handling of the
existing "-o" option in the same function, see 9cf6d3357a (Add
git-index-pack utility, 2005-10-12) for its addition. That's a short
option, but the code to implement the two is the same in functionality
and style. Eventually we'd like to migrate all of this this to
parse_options(), which would make these differences in behavior go
away.
1. https://lore.kernel.org/git/RFC-cover-00.13-0000000000-20210805T150534Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the "flags" parameter was added in be042aff24 (Teach progress
eye-candy to fetch_refs_from_bundle(), 2011-09-18) there's never been
more than the one flag: BUNDLE_VERBOSE.
Let's have the only caller who cares about that pass "-v" itself
instead through new "extra_index_pack_args" parameter. The flexibility
of being able to pass arbitrary arguments to "unbundle" will be used
in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing mechanism for scheduling background maintenance is done
through cron. On Linux systems managed by systemd, systemd provides an
alternative to schedule recurring tasks: systemd timers.
The main motivations to implement systemd timers in addition to cron
are:
* cron is optional and Linux systems running systemd might not have it
installed.
* The execution of `crontab -l` can tell us if cron is installed but not
if the daemon is actually running.
* With systemd, each service is run in its own cgroup and its logs are
tagged by the service inside journald. With cron, all scheduled tasks
are running in the cron daemon cgroup and all the logs of the
user-scheduled tasks are pretended to belong to the system cron
service.
Concretely, a user that doesn’t have access to the system logs won’t
have access to the log of their own tasks scheduled by cron whereas
they will have access to the log of their own tasks scheduled by
systemd timer.
Although `cron` attempts to send email, that email may go unseen by
the user because these days, local mailboxes are not heavily used
anymore.
In order to schedule git maintenance, we need two unit template files:
* ~/.config/systemd/user/git-maintenance@.service
to define the command to be started by systemd and
* ~/.config/systemd/user/git-maintenance@.timer
to define the schedule at which the command should be run.
Those units are templates that are parameterized by the frequency.
Based on those templates, 3 timers are started:
* git-maintenance@hourly.timer
* git-maintenance@daily.timer
* git-maintenance@weekly.timer
The command launched by those three timers are the same as with the
other scheduling methods:
/path/to/git for-each-repo --exec-path=/path/to
--config=maintenance.repo maintenance run --schedule=%i
with the full path for git to ensure that the version of git launched
for the scheduled maintenance is the same as the one used to run
`maintenance start`.
The timer unit contains `Persistent=true` so that, if the computer is
powered down when a maintenance task should run, the task will be run
when the computer is back powered on.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on the system, different schedulers can be used to schedule
the hourly, daily and weekly executions of `git maintenance run`:
* `launchctl` for MacOS,
* `schtasks` for Windows and
* `crontab` for everything else.
`git maintenance run` now has an option to let the end-user explicitly
choose which scheduler he wants to use:
`--scheduler=auto|crontab|launchctl|schtasks`.
When `git maintenance start --scheduler=XXX` is run, it not only
registers `git maintenance run` tasks in the scheduler XXX, it also
removes the `git maintenance run` tasks from all the other schedulers to
ensure we cannot have two schedulers launching concurrent identical
tasks.
The default value is `auto` which chooses a suitable scheduler for the
system.
`git maintenance stop` doesn't have any `--scheduler` parameter because
this command will try to remove the `git maintenance run` tasks from all
the available schedulers.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current implementation of `xdg_config_home(filename)` returns
`$XDG_CONFIG_HOME/git/$filename`, with the `git` subdirectory inserted
between the `XDG_CONFIG_HOME` environment variable and the parameter.
This patch introduces a `xdg_config_home_for(subdir, filename)` function
which is more generic. It only concatenates "$XDG_CONFIG_HOME", or
"$HOME/.config" if the former isn’t defined, with the parameters,
without adding `git` in between.
`xdg_config_home(filename)` is now implemented by calling
`xdg_config_home_for("git", filename)` but this new generic function can
be used to compute the configuration directory of other programs.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'debug' function in test-lib-functions.sh is used to invoke a
debugger at a specific line in a test. It inherits the value of HOME and
TERM set by 'test-lib.sh': HOME="$TRASH_DIRECTORY" and TERM=dumb.
Changing the value of HOME means that any customization configured in a
developers' debugger configuration file (like $HOME/.gdbinit or
$HOME/.lldbinit) are not available in the debugger invoked by
'test_pause'.
Changing the value of TERM to 'dumb' means that colored output
is disabled in the debugger.
To make the debugging experience with 'debug' more pleasant, leverage
the variable USER_HOME, added in the previous commit, to copy a
developer's ~/.gdbinit and ~/.lldbinit to the test HOME. We do not set
HOME to USER_HOME as in 'test_pause' to avoid user configuration in
$USER_HOME/.gitconfig from interfering with the command being debugged.
Also, add a flag to launch the debugger with the original value of
TERM, and add the same warning as for 'test_pause'.
Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'test_pause' function, which is designed to help interactive
debugging and exploration of tests, currently inherits the value of HOME
and TERM set by 'test-lib.sh': HOME="$TRASH_DIRECTORY" and TERM=dumb. It
also invokes the shell defined by TEST_SHELL_PATH, which defaults to
/bin/sh (through SHELL_PATH).
Changing the value of HOME means that any customization configured in a
developers' shell startup files and any Git aliases defined in their
global Git configuration file are not available in the shell invoked by
'test_pause'.
Changing the value of TERM to 'dumb' means that colored output
is disabled for all commands in that shell.
Using /bin/sh as the shell invoked by 'test_pause' is not ideal since
some platforms (i.e. Debian and derivatives) use Dash as /bin/sh, and
this shell is usually compiled without readline support, which makes for
a poor interactive command line experience.
To make the interactive command line experience in the shell invoked by
'test_pause' more pleasant, save the values of HOME and TERM in
USER_HOME and USER_TERM before changing them in test-lib.sh, and add
options to 'test_pause' to optionally use these variables to invoke the
shell. Also add an option to invoke SHELL instead of TEST_SHELL_PATH, so
that developer's interactive shell is used.
We use options instead of changing the behaviour unconditionally since
these three variables can slightly change command behaviour. Moreover,
using the original HOME means commands could overwrite files in a user's
home directory. Be explicit about these caveats in the new 'Usage'
section in test-lib-functions.sh.
Finally, add '[options]' to the test_pause synopsys in t/README, and
mention that the full list of helper functions and their options can be
found in test-lib-functions.sh.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
3f824e91c8 (t/Makefile: introduce TEST_SHELL_PATH, 2017-12-08)
made it easy to use a different shell for the tests than 'SHELL_PATH'
used at compile time. But 'test_pause' still invokes 'SHELL_PATH'.
If TEST_SHELL_PATH is set, invoke that shell in 'test_pause' for
consistency.
Suggested-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add $(INSTALL_STRIP), which allows passing stripping options to
$(INSTALL).
For this to work, installing executables must be split to installing
compiled binaries and scripts portions, since $(INSTALL_STRIP) is only
meaningful to the former.
Users can set this variable depending on their system. For example,
Linux users can use `-s --strip-program=strip`, while FreeBSD users can
simply set to `-s` and choose strip program with $STRIPBIN.
[original outline by Đoàn Trần Công Danh]
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ll_binary_merge() function assumes that the ancestor blob is
different from either side of the new versions, and always fails
the merge in conflict, unless -Xours or -Xtheirs is in effect.
The normal "merge" machineries all resolve the trivial cases
(e.g. if our side changed while their side did not, the result
is ours) without triggering the file-level merge drivers, so the
assumption is warranted.
The code path in "git apply --3way", however, does not check for
the trivial three-way merge situation and always calls the
file-level merge drivers. This used to be perfectly OK back
when we always first attempted a straight patch application and
used the three-way code path only as a fallback. Any binary
patch that can be applied as a trivial three-way merge (e.g. the
patch is based exactly on the version we happen to have) would
always cleanly apply, so the ll_binary_merge() that is not
prepared to see the trivial case would not have to handle such a
case.
This no longer is true after we made "--3way" to mean "first try
three-way and then fall back to straight application", and made
"git apply -3" on a binary patch that is based on the current
version no longer apply.
Teach "git apply -3" to first check for the trivial merge cases
and resolve them without hitting the file-level merge drivers.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
[jc: stolen tests from Jerry's patch]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to the command line completion (in contrib/) for tcsh.
* ti/tcsh-completion-regression-fix:
completion: tcsh: Fix regression by drop of wrapper functions
Command line completion updates.
* fc/completion-updates:
completion: bash: add correct suffix in variables
completion: bash: fix for multiple dash commands
completion: bash: fix for suboptions with value
completion: bash: fix prefix detection in branch.*
Various bugs in "git rebase -r" have been fixed.
* pw/rebase-r-fixes:
rebase -r: fix merge -c with a merge strategy
rebase -r: don't write .git/MERGE_MSG when fast-forwarding
rebase -i: add another reword test
rebase -r: make 'merge -c' behave like reword
Checking out all the paths from HEAD during the last conflicted
step in "git rebase" and continuing would cause the step to be
skipped (which is expected), but leaves MERGE_MSG file behind in
$GIT_DIR and confuses the next "git commit", which has been
corrected.
* pw/rebase-skip-final-fix:
rebase --continue: remove .git/MERGE_MSG
rebase --apply: restore some tests
t3403: fix commit authorship
Use upload-artifacts v1 (instead of v2) for 32-bit linux, as the
new version has a blocker bug for that architecture.
* cb/ci-use-upload-artifacts-v1:
ci: use upload-artifacts v1 for dockerized jobs
"git commit --fixup" now works with "--edit" again, after it was
broken in v2.32.
* jk/commit-edit-fixup-fix:
commit: restore --edit when combined with --fixup
The revision traversal API has been optimized by taking advantage
of the commit-graph, when available, to determine if a commit is
reachable from any of the existing refs.
* ps/connectivity-optim:
revision: avoid hitting packfiles when commits are in commit-graph
commit-graph: split out function to search commit position
revision: stop retrieving reference twice
connected: do not sort input revisions
revision: separate walk and unsorted flags
With the codebase firmly C99 compatible and most compilers supporting
newer versions by default, it could help bring visibility to problems.
Reverse the DEVOPTS=pedantic flag to provide a fallback for people stuck
with gcc < 5 or some other compiler that either doesn't support this flag
or has issues with it, and while at it also enable -Wpedantic which used
to be controversial[1] when Apple compilers and clang had widely divergent
version numbers.
Ideally any compiler found to have issues with these flags will be added
to an exception, and indeed, one was added to safely process windows
headers that would use non standard print identifiers, but it is expected
that more will be needed, so it could be considered a weather balloon.
[1] https://lore.kernel.org/git/20181127100557.53891-1-carenas@gmail.com/
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation to building with pedantic mode enabled, change a couple
of places where the current mingw gcc compiler provided with the SDK
reports issues.
A full fix for the incompatible use of (void *) to store function
pointers has been punted, with the minimal change to instead use a
generic function pointer (FARPROC), and therefore the (hopefully)
temporary need to disable incompatible pointer warnings.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the USE_PARENS_AROUND_GETTEXT_N compile-time option which was
meant to catch an inadvertent mistake which is too obscure to
maintain this facility.
The backstory of how USE_PARENS_AROUND_GETTEXT_N came about is: When I
added the N_() macro in 6578483036 (i18n: add no-op _() and N_()
wrappers, 2011-02-22) it was defined as:
#define N_(msgid) (msgid)
This is non-standard C, as was noticed and fixed in 642f85faab (i18n:
avoid parenthesized string as array initializer, 2011-04-07).
I.e. this needed to be defined as:
#define N_(msgid) msgid
Then in e62cd35a3e (i18n: log: mark parseopt strings for translation,
2012-08-20) when "builtin_log_usage" was marked for translation the
string concatenation for passing to usage() added in 1c370ea4e5
(Show usage string for 'git log -h', 'git show -h' and 'git diff -h',
2009-08-06) was faithfully preserved:
- "git log [<options>] [<since>..<until>] [[--] <path>...]\n"
- " or: git show [options] <object>...",
+ N_("git log [<options>] [<since>..<until>] [[--] <path>...]\n")
+ N_(" or: git show [options] <object>..."),
This was then fixed to be the expected array of usage strings in
e66dc0cc4b (log.c: fix translation markings, 2015-01-06) rather than
a string with multiple "\n"-delimited usage strings, and finally in
290c8e7a3f (gettext.h: add parentheses around N_ expansion if
supported, 2015-01-11) USE_PARENS_AROUND_GETTEXT_N was added to ensure
this mistake didn't happen again.
I think that even if this was a N_()-specific issue this
USE_PARENS_AROUND_GETTEXT_N facility wouldn't be worth it, the issue
would be too rare to worry about.
But I also think that 290c8e7a3f which introduced
USE_PARENS_AROUND_GETTEXT_N misattributed the problem. The issue
wasn't with the N_() macro added in e62cd35a3e, but that before the
N_() macro existed in the codebase the initial migration to
parse_options() in 1c370ea4e5 continued passsing in a "\n"-delimited
string, when the new API it was migrating to supported and expected
the passing of an array.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When executing git-update-ref(1) with the `--stdin` flag, then the user
can queue updates and, since e48cf33b61 (update-ref: implement
interactive transaction handling, 2020-04-02), interactively drive the
transaction's state via a set of transactional verbs. This interactivity
is somewhat broken though: while the caller can use these verbs to drive
the transaction's state, the status messages which confirm that a verb
has been processed is not flushed. The caller may thus be left hanging
waiting for the acknowledgement.
Fix the bug by flushing stdout after writing the status update. Add a
test which catches this bug.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In make_remote(), we store the return value of hashmap_put() and check
it using assert(), but don't otherwise use it. If Git is compiled with
NDEBUG, then the assert() becomes a noop, and nobody looks at the
variable at all. This causes some compilers to produce warnings.
Let's switch it instead to a BUG(). This accomplishes the same thing,
but is always compiled in (and we don't have to worry about the cost;
the check is cheap, and this is not a hot code path).
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the trailing dot from the warning we emit about gc.log. It's
common for various terminal UX's to allow the user to select "words",
and by including the trailing dot a user wanting to select the path to
gc.log will need to manually remove the trailing dot.
Such a user would also probably need to adjust the path if it e.g. had
spaces in it, but this should address this very common case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Suggested-by: Jan Judas <snugar.i@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These new performance tests demonstrate effectively the same behavior as
p5310, but use a multi-pack bitmap instead of a single-pack one.
Notably, p5326 does not create a MIDX bitmap with multiple packs. This
is so we can measure a direct comparison between it and p5310. Any
difference between the two is measuring just the overhead of using MIDX
bitmaps.
Here are the results of p5310 and p5326 together, measured at the same
time and on the same machine (using a Xenon W-2255 CPU):
Test HEAD
------------------------------------------------------------------------
5310.2: repack to disk 96.78(93.39+11.33)
5310.3: simulated clone 9.98(9.79+0.19)
5310.4: simulated fetch 1.75(4.26+0.19)
5310.5: pack to file (bitmap) 28.20(27.87+8.70)
5310.6: rev-list (commits) 0.41(0.36+0.05)
5310.7: rev-list (objects) 1.61(1.54+0.07)
5310.8: rev-list count with blob:none 0.25(0.21+0.04)
5310.9: rev-list count with blob:limit=1k 2.65(2.54+0.10)
5310.10: rev-list count with tree:0 0.23(0.19+0.04)
5310.11: simulated partial clone 4.34(4.21+0.12)
5310.13: clone (partial bitmap) 11.05(12.21+0.48)
5310.14: pack to file (partial bitmap) 31.25(34.22+3.70)
5310.15: rev-list with tree filter (partial bitmap) 0.26(0.22+0.04)
versus the same tests (this time using a multi-pack index):
Test HEAD
------------------------------------------------------------------------
5326.2: setup multi-pack index 78.99(75.29+11.58)
5326.3: simulated clone 11.78(11.56+0.22)
5326.4: simulated fetch 1.70(4.49+0.13)
5326.5: pack to file (bitmap) 28.02(27.72+8.76)
5326.6: rev-list (commits) 0.42(0.36+0.06)
5326.7: rev-list (objects) 1.65(1.58+0.06)
5326.8: rev-list count with blob:none 0.26(0.21+0.05)
5326.9: rev-list count with blob:limit=1k 2.97(2.86+0.10)
5326.10: rev-list count with tree:0 0.25(0.20+0.04)
5326.11: simulated partial clone 5.65(5.49+0.16)
5326.13: clone (partial bitmap) 12.22(13.43+0.38)
5326.14: pack to file (partial bitmap) 30.05(31.57+7.25)
5326.15: rev-list with tree filter (partial bitmap) 0.24(0.20+0.04)
There is slight overhead in "simulated clone", "simulated partial
clone", and "clone (partial bitmap)". Unsurprisingly, that overhead is
due to using the MIDX's reverse index to map between bit positions and
MIDX positions.
This can be reproduced by running "git repack -adb" along with "git
multi-pack-index write --bitmap" in a large-ish repository. Then run:
$ perf record -o pack.perf git -c core.multiPackIndex=false \
pack-objects --all --stdout >/dev/null </dev/null
$ perf record -o midx.perf git -c core.multiPackIndex=true \
pack-objects --all --stdout >/dev/null </dev/null
and compare the two with "perf diff -c delta -o 1 pack.perf midx.perf".
The most notable results are below (the next largest positive delta is
+0.14%):
# Event 'cycles'
#
# Baseline Delta Shared Object Symbol
# ........ ....... .................. ..........................
#
+5.86% git [.] nth_midxed_offset
+5.24% git [.] nth_midxed_pack_int_id
3.45% +0.97% git [.] offset_to_pack_pos
3.30% +0.57% git [.] pack_pos_to_offset
+0.30% git [.] pack_pos_to_midx
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new p5326 introduced by the next patch will want these same tests,
interjecting its own setup in between. Move them out so that both perf
tests can reuse them.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP' environment
variable to also write a multi-pack bitmap when
'GIT_TEST_MULTI_PACK_INDEX' is set.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A number of these tests are focused only on pack-based bitmaps and need
to be updated to disable 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP' where
necessary.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test is specifically about generating a midx still respecting a
pack-based bitmap file. Generating a MIDX bitmap would confuse the test.
Let's override the 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP' variable to
make sure we don't do so.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generating a MIDX bitmap confuses many of the tests in t5310, which
expect to control whether and how bitmaps are written. Since the
relevant MIDX-bitmap tests here are covered already in t5326, let's just
disable the flag for the whole t5310 script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generating a MIDX bitmap causes tests which repack in a partial clone to
fail because they are missing objects. Missing objects is an expected
component of tests in t0410, so disable this knob altogether. Graceful
degradation when writing a bitmap with missing objects is tested in
t5326.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces a new test, t5326, which tests the basic
functionality of multi-pack bitmaps.
Some trivial behavior is tested, such as:
- Whether bitmaps can be generated with more than one pack.
- Whether clones can be served with all objects in the bitmap.
- Whether follow-up fetches can be served with some objects outside of
the server's bitmap
These use lib-bitmap's tests (which in turn were pulled from t5310), and
we cover cases where the MIDX represents both a single pack and multiple
packs.
In addition, some non-trivial and MIDX-specific behavior is tested, too,
including:
- Whether multi-pack bitmaps behave correctly with respect to the
pack-reuse machinery when the base for some object is selected from
a different pack than the delta.
- Whether multi-pack bitmaps correctly respect the
pack.preferBitmapTips configuration.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subsequent tests will want to check for the existence of a multi-pack
bitmap which matches the multi-pack-index stored in the pack directory.
The multi-pack bitmap includes the hex checksum of the MIDX it
corresponds to in its filename (for example,
'$packdir/multi-pack-index-<checksum>.bitmap'). As a result, some tests
want a way to learn what '<checksum>' is.
This helper addresses that need by printing the checksum of the
repository's multi-pack-index.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll soon be adding a test script that will cover many of the same
bitmap concepts as t5310, but for MIDX bitmaps. Let's pull out as many
of the applicable tests as we can so we don't have to rewrite them.
There should be no functional change to t5310; we still run the same
operations in the same order.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Write multi-pack bitmaps in the format described by
Documentation/technical/bitmap-format.txt, inferring their presence with
the absence of '--bitmap'.
To write a multi-pack bitmap, this patch attempts to reuse as much of
the existing machinery from pack-objects as possible. Specifically, the
MIDX code prepares a packing_data struct that pretends as if a single
packfile has been generated containing all of the objects contained
within the MIDX.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prepares the code in pack-bitmap to interpret the new multi-pack
bitmaps described in Documentation/technical/bitmap-format.txt, which
mostly involves converting bit positions to accommodate looking them up
in a MIDX.
Note that there are currently no writers who write multi-pack bitmaps,
and that this will be implemented in the subsequent commit. Note also
that get_midx_checksum() and get_midx_filename() are made non-static so
they can be called from pack-bitmap.c.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
try_partial_reuse() is used to mark any bits in the beginning of a
bitmap whose objects can be reused verbatim from the pack they came
from.
Currently this function returns void, and signals nothing to the caller
when bits could not be reused. But multi-pack bitmaps would benefit from
having such a signal, because they may try to pass objects which are in
bounds, but from a pack other than the preferred one.
Any extra calls are noops because of a conditional in
reuse_partial_packfile_from_bitmap(), but those loop iterations can be
avoided by letting try_partial_reuse() indicate when it can't accept any
more bits for reuse, and then listening to that signal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a recent commit, pack-objects learned support for the
'pack.preferBitmapTips' configuration. This patch prepares the
multi-pack bitmap code to respect this configuration, too.
The yet-to-be implemented code will find that it is more efficient to
check whether each reference contains a prefix found in the configured
set of values rather than doing an additional traversal.
Implement a function 'bitmap_is_preferred_refname()' which will perform
that check. Its caller will be added in a subsequent patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ævar Arnfjörð Bjarmason
René Scharfe
Sergey Organov
Lénaïc Huard
Philippe Blain
Bagas Sanjaya
Junio C Hamano
Carlo Marcelo Arenas Belón
Patrick Steinhardt
Taylor Blau
Jeff King