"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
Update the hashmap API so that data to customize the behaviour of
the comparison function can be specified at the time a hashmap is
initialized.
* sb/hashmap-customize-comparison:
hashmap: migrate documentation from Documentation/technical into header
patch-ids.c: use hashmap correctly
hashmap.h: compare function has access to a data field
Back in prehistoric times, our decision on whether or not to
show color by default relied on using a config callback that
either did or didn't load color config like color.diff.
When we introduced color.ui, we put it in the same boat:
commands had to manually respect it by using git_color_config()
or its git_color_default_config() convenience wrapper.
But in 4c7f1819b (make color.ui default to 'auto',
2013-06-10), that changed. Since then, we default color.ui
to auto in all programs, meaning that even plumbing commands
like "git diff-tree --pretty" might colorize the output.
Nobody seems to have complained in the intervening years,
presumably because the "is stdout a tty" check does a good
job of catching the right cases.
But that leaves an interesting curiosity: color.ui defaults
to auto even in plumbing, but you can't actually _disable_
the color via config. So if you really hate color and set
"color.ui" to false, diff-tree will still show color (but
porcelain like git-diff won't). Nobody noticed that either,
probably because very few people disable color.
One could argue that the plumbing should _always_ disable
color unless an explicit --color option is given on the
command line. But in practice, this creates a lot of
complications for scripts which do want plumbing to show
user-visible output. They can't just pass "--color" blindly;
they need to check the user's config and decide what to
send.
Given that nobody has complained about the current behavior,
let's assume it's a good path, and follow it to its
conclusion: supporting color.ui everywhere.
Note that you can create havoc by setting color.ui=always in
your config, but that's more or less already the case. We
could disallow it entirely, but it is handy for one-offs
like:
git -c color.ui=always foo >not-a-tty
when "foo" does not take a --color option itself.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a "repository" object to eventually make it easier to
work in multiple repositories (the primary focus is to work with
the superproject and its submodules) in a single process.
* bw/repo-object:
ls-files: use repository object
repository: enable initialization of submodules
submodule: convert is_submodule_initialized to work on a repository
submodule: add repo_read_gitmodules
submodule-config: store the_submodule_cache in the_repository
repository: add index_state to struct repo
config: read config from a repository object
path: add repo_worktree_path and strbuf_repo_worktree_path
path: add repo_git_path and strbuf_repo_git_path
path: worktree_git_path() should not use file relocation
path: convert do_git_path to take a 'struct repository'
path: convert strbuf_git_common_path to take a 'struct repository'
path: always pass in commondir to update_common_dir
path: create path.h
environment: store worktree in the_repository
environment: place key repository state in the_repository
repository: introduce the repository object
environment: remove namespace_len variable
setup: add comment indicating a hack
setup: don't perform lazy initialization of repository state
When using the hashmap a common need is to have access to caller provided
data in the compare function. A couple of times we abuse the keydata field
to pass in the data needed. This happens for example in patch-ids.c.
This patch changes the function signature of the compare function
to have one more void pointer available. The pointer given for each
invocation of the compare function must be defined in the init function
of the hashmap and is just passed through.
Documentation of this new feature is deferred to a later patch.
This is a rather mechanical conversion, just adding the new pass-through
parameter. However while at it improve the naming of the fields of all
compare functions used by hashmaps by ensuring unused parameters are
prefixed with 'unused_' and naming the parameters what they are (instead
of 'unused' make it 'unused_keydata').
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
The code to pick up and execute command alias definition from the
configuration used to switch to the top of the working tree and
then come back when the expanded alias was executed, which was
unnecessarilyl complex. Attempt to simplify the logic by using the
early-config mechanism that does not chdir around.
* js/alias-early-config:
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
Remove the unused wildopts placeholder struct from being passed to all
wildmatch() invocations, or rather remove all the boilerplate NULL
parameters.
This parameter was added back in commit 9b3497cab9 ("wildmatch: rename
constants and update prototype", 2013-01-01) as a placeholder for
future use. Over 4 years later nothing has made use of it, let's just
remove it. It can be added in the future if we find some reason to
start using such a parameter.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the config machinery to read config information from a repository
object. This involves storing a 'struct config_set' inside the
repository object and adding a number of functions (repo_config*) to be
able to query a repository's config.
The current config API enables lazy-loading of the config. This means
that when 'git_config_get_int()' is called, if the_config_set hasn't
been populated yet, then it will be populated and properly initialized by
reading the necessary config files (system wide .gitconfig, user's home
.gitconfig, and the repository's config). To maintain this paradigm,
the new API to read from a repository object's config will also perform
this lazy-initialization.
Since both APIs (git_config_get* and repo_config_get*) have the same
semantics we can migrate the default config to be stored within
'the_repository' and just have the 'git_config_get*' family of functions
redirect to the 'repo_config_get*' functions.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bw/ls-files-sans-the-index:
ls-files: factor out tag calculation
ls-files: factor out debug info into a function
ls-files: convert show_files to take an index
ls-files: convert show_ce_entry to take an index
ls-files: convert prune_cache to take an index
ls-files: convert ce_excluded to take an index
ls-files: convert show_ru_info to take an index
ls-files: convert show_other_files to take an index
ls-files: convert show_killed_files to take an index
ls-files: convert write_eolinfo to take an index
ls-files: convert overlay_tree_on_cache to take an index
tree: convert read_tree to take an index parameter
convert: convert renormalize_buffer to take an index
convert: convert convert_to_git to take an index
convert: convert convert_to_git_filter_fd to take an index
convert: convert crlf_to_git to take an index
convert: convert get_cached_convert_stats_ascii to take an index
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
Apply the result of the just-added coccinelle rule. This manually
excludes a few occurrences, mostly things that resulted in many
FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git_config_with_options()' takes a 'config_options' struct which
contains feilds for 'git_dir' and 'commondir'. If those feilds happen
to be NULL the config machinery falls back to querying global repository
state. Let's change this and instead use these fields in the
'config_options' struct explicilty all the time. Since the API is
slightly changing to require these two fields to be set if callers want
the config machinery to load the repository's config, let's change the
name to 'config_with_optison()'. This allows the config machinery to
not implicitly rely on any global repository state.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Worktrees present an interesting problem when it comes to the config.
Historically we could assume that the per-repository config lives at
'gitdir/config', but since worktrees were introduced this isn't the case
anymore. There is currently no way to specify per-worktree
configuration, and as such the repository config is shared with all
worktrees and is located at 'commondir/config'.
Many users of the config machinery correctly set
'config_options.git_dir' with the repository's commondir, allowing the
config to be properly loaded when operating in a worktree. But other's,
like 'read_early_config()', set 'config_options.git_dir' with the
repository's gitdir which can be incorrect when using worktrees.
To fix this issue, and to make things less ambiguous, lets add a
'commondir' field to the 'config_options' struct and have all callers
properly set both the 'git_dir' and 'commondir' fields so that the
config machinery is able to properly find the repository's config.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'discover_git_directory' only looks at the gitdir to determine
if a git directory was discovered. This causes a problem in the event
that the gitdir which was discovered was in fact a per-worktree git
directory and not the common git directory. This is because the
repository config, which is checked to verify the repository's format,
is stored in the commondir and not in the per-worktree gitdir. Correct
this behavior by checking the config stored in the commondir.
It will also be of use for callers to have access to the commondir, so
lets also return that upon successfully discovering a git directory.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When get_value() parses a key/value pair, it is possible that the line
number is decreased (because the \n has been consumed already) before the
key/value pair is passed to the callback function, to allow for the
correct line to be attributed in case of an error.
However, when git_parse_source() asks get_value() to parse the key/value
pair, the error reporting is performed *after* get_value() returns.
Which means that we have to be careful not to increase the line number
in get_value() after the callback function returned an error.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often try to open a file for reading whose existence is
optional, and silently ignore errors from open/fopen; report such
errors if they are not due to missing files.
* nd/fopen-errors:
mingw_fopen: report ENOENT for invalid file names
mingw: verify that paths are not mistaken for remote nicknames
log: fix memory leak in open_next_file()
rerere.c: move error_errno() closer to the source system call
print errno when reporting a system call error
wrapper.c: make warn_on_inaccessible() static
wrapper.c: add and use fopen_or_warn()
wrapper.c: add and use warn_on_fopen_errors()
config.mak.uname: set FREAD_READS_DIRECTORIES for Darwin, too
config.mak.uname: set FREAD_READS_DIRECTORIES for Linux and FreeBSD
clone: use xfopen() instead of fopen()
use xfopen() in more places
git_fopen: fix a sparse 'not declared' warning
The recently introduced "[includeIf "gitdir:$dir"] path=..."
mechansim has further been taught to take symlinks into account.
The directory "$dir" specified in "gitdir:$dir" may be a symlink to
a real location, not something that $(getcwd) may return. In such
a case, a realpath of "$dir" is compared with the real path of the
current repository to determine if the contents from the named path
should be included.
* ab/conditional-config-with-symlinks:
config: match both symlink & realpath versions in IncludeIf.gitdir:*
When fopen() returns NULL, it could be because the given path does not
exist, but it could also be some other errors and the caller has to
check. Add a wrapper so we don't have to repeat the same error check
everywhere.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many places, Git warns about an inaccessible file after a fopen()
failed. To discern these cases from other cases where we want to warn
about inaccessible files, introduce a new helper specifically to test
whether fopen() failed because the current user lacks the permission to
open file in question.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the conditional inclusion mechanism to support
e.g. gitdir:~/git_tree/repo where ~/git_tree is a symlink to
/mnt/stuff/repo.
This worked in the initial version of this facility[1], but regressed
later in the series while solving a related bug[2].
Now gitdir: will match against the symlinked
path (e.g. gitdir:~/git_tree/repo) in addition to the current
/mnt/stuff/repo path.
Since this is already in a release version note in the documentation
that this behavior changed, so users who expect their configuration to
work on both v2.13.0 and some future version of git with this fix
aren't utterly confused.
1. commit 3efd0bedc6 ("config: add conditional include", 2017-03-01)
2. commit 86f9515708 ("config: resolve symlinks in conditional
include's patterns", 2017-04-05)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
In case of errors, we really want the file descriptor to be closed.
Discovered by a Coverity scan.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recently introduced conditional inclusion of configuration did
not work well when early-config mechanism was involved.
* nd/conditional-config-in-early-config:
config: correct file reading order in read_early_config()
config: handle conditional include when $GIT_DIR is not set up
config: prepare to pass more info in git_config_with_options()
$GIT_DIR may in some cases be normalized with all symlinks resolved
while "gitdir" path expansion in the pattern does not receive the
same treatment, leading to incorrect mismatch. This has been fixed.
* nd/conditional-config-include:
config: resolve symlinks in conditional include's patterns
path.c: and an option to call real_path() in expand_user_path()
Config file reading order is important because each file can override
values in the previous files and this is expected behavior. Normally
we read in this order, all in do_git_config_sequence():
1. $HOME/.gitconfig
2. $GIT_DIR/config
3. config from command line
However in read_early_config() the order may be swapped a bit if
setup_git_directory() has not been called:
1. $HOME/.gitconfig
2. $GIT_DIR/config is NOT read because .git dir is not found _yet_
3. config from command line
4. $GIT_DIR/config is now READ (after discover_git_directory() call)
The reading at step 4 could override config at step 3, which is not
the expectation.
Now that we could pass the .git dir around, we could feed
discover_git_directory() back to step 2, so that it works again, and
remove step 4.
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If setup_git_directory() and friends have not been called,
get_git_dir() (because of includeIf.gitdir:XXX) would lead to
die("BUG: setup_git_env called without repository");
There are two cases when a config file could be read before $GIT_DIR
is located.
The first one is check_repository_format(), where we read just the one
file $GIT_DIR/config to check if we could understand this
repository. This case should be safe. We do not parse include
directives, which can only be triggered from git_config_with_options,
but setup code uses a lower-level function. The concerned variables
should never be hidden away behind includes anyway.
The second one is triggered in check_pager_config() when we're about
to run an external git command. We might be able to find $GIT_DIR in
this case, which is exactly what read_early_config() does (and also is
what check_pager_config() uses). Conditional includes and
get_git_dir() could be triggered by the first
git_config_with_options() call there, before discover_git_directory()
is used as a fallback $GIT_DIR detection.
Detect this special "early reading" case, pass down the $GIT_DIR,
either from previous setup or detected by discover_git_directory(),
and make conditional include use it.
Noticed-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far we can only pass one flag, respect_includes, to thie function. We
need to pass some more (non-flag even), so let's make it accept a struct
instead of an integer.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$GIT_DIR returned by get_git_dir() is normalized, with all symlinks
resolved (see setup_work_tree function). In order to match paths (or
patterns) against $GIT_DIR char-by-char, they have to be normalized
too. There is a note in config.txt about this, that the user need to
resolve symlinks by themselves if needed.
The problem is, we allow certain path expansion, '~/' and './', for
convenience and can't ask the user to resolve symlinks in these
expansions. Make sure the expanded paths have all symlinks resolved.
PS. The strbuf_realpath(&text, get_git_dir(), 1) is still needed because
get_git_dir() may return relative path.
Noticed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch we need the ability to expand '~' to
real_path($HOME). But we can't do that from outside because '~' is part
of a pattern, not a true path. Add an option to expand_user_path() to do
so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately, in order to push some large repos where a server does
not support chunked encoding, the http postbuffer must sometimes
exceed two gigabytes. On a 64-bit system, this is OK: we just malloc
a larger buffer.
This means that we need to use CURLOPT_POSTFIELDSIZE_LARGE to set the
buffer size.
Signed-off-by: David Turner <dturner@twosigma.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration file learned a new "includeIf.<condition>.path"
that includes the contents of the given path only when the
condition holds. This allows you to say "include this work-related
bit only in the repositories under my ~/work/ directory".
* nd/conditional-config-include:
config: add conditional include
config.txt: reflow the second include.path paragraph
config.txt: clarify multiple key values in include.path
The start-up sequence of "git" needs to figure out some configured
settings before it finds and set itself up in the location of the
repository and was quite messy due to its "chicken-and-egg" nature.
The code has been restructured.
* js/early-config:
setup.c: mention unresolved problems
t1309: document cases where we would want early config not to die()
setup_git_directory_gently_1(): avoid die()ing
t1309: test read_early_config()
read_early_config(): really discover .git/
read_early_config(): avoid .git/config hack when unneeded
setup: make read_early_config() reusable
setup: introduce the discover_git_directory() function
setup_git_directory_1(): avoid changing global state
setup: prepare setup_discovered_git_dir() for the root directory
setup_git_directory(): use is_dir_sep() helper
t7006: replace dubious test
The experimental "split index" feature has gained a few
configuration variables to make it easier to use.
* cc/split-index-config: (22 commits)
Documentation/git-update-index: explain splitIndex.*
Documentation/config: add splitIndex.sharedIndexExpire
read-cache: use freshen_shared_index() in read_index_from()
read-cache: refactor read_index_from()
t1700: test shared index file expiration
read-cache: unlink old sharedindex files
config: add git_config_get_expiry() from gc.c
read-cache: touch shared index files when used
sha1_file: make check_and_freshen_file() non static
Documentation/config: add splitIndex.maxPercentChange
t1700: add tests for splitIndex.maxPercentChange
read-cache: regenerate shared index if necessary
config: add git_config_get_max_percent_split_change()
Documentation/git-update-index: talk about core.splitIndex config var
Documentation/config: add information for core.splitIndex
t1700: add tests for core.splitIndex
update-index: warn in case of split-index incoherency
read-cache: add and then use tweak_split_index()
split-index: add {add,remove}_split_index() functions
config: add git_config_get_split_index()
...
Earlier, we punted and simply assumed that we are in the top-level
directory of the project, and that there is no .git file but a .git/
directory so that we can read directly from .git/config.
However, that is not necessarily true. We may be in a subdirectory. Or
.git may be a gitfile. Or the environment variable GIT_DIR may be set.
To remedy this situation, we just refactored the way
setup_git_directory() discovers the .git/ directory, to make it
reusable, and more importantly, to leave all global variables and the
current working directory alone.
Let's discover the .git/ directory correctly in read_early_config() by
using that new function.
This fixes 4 known breakages in t7006.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, we only look whether the startup_info claims to have seen a
git_dir.
However, do_git_config_sequence() (and consequently the
git_config_with_options() call used by read_early_config() asks the
have_git_dir() function whether we have a .git/ directory, which in turn
also looks at git_dir and at the environment variable GIT_DIR. And when
this is the case, the repository config is handled already, so we do not
have to do that again explicitly.
Let's just use the same function, have_git_dir(), to determine whether we
have to handle .git/config explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pager configuration needs to be read early, possibly before
discovering any .git/ directory.
Let's not hide this function in pager.c, but make it available to other
callers.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes a set of repositories want to share configuration settings
among themselves that are distinct from other such sets of repositories.
A user may work on two projects, each of which have multiple
repositories, and use one user.email for one project while using another
for the other.
Setting $GIT_DIR/.config works, but if the penalty of forgetting to
update $GIT_DIR/.config is high (especially when you end up cloning
often), it may not be the best way to go. Having the settings in
~/.gitconfig, which would work for just one set of repositories, would
not well in such a situation. Having separate ${HOME}s may add more
problems than it solves.
Extend the include.path mechanism that lets a config file include
another config file, so that the inclusion can be done only when some
conditions hold. Then ~/.gitconfig can say "include config-project-A
only when working on project-A" for each project A the user works on.
In this patch, the only supported grouping is based on $GIT_DIR (in
absolute path), so you would need to group repositories by directory, or
something like that to take advantage of it.
We already have include.path for unconditional includes. This patch goes
with includeIf.<condition>.path to make it clearer that a condition is
required. The new config has the same backward compatibility approach as
include.path: older git versions that don't understand includeIf will
simply ignore them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "parse_config_key()" API function has been cleaned up.
* jk/parse-config-key-cleanup:
parse_hide_refs_config: tell parse_config_key we don't want a subsection
parse_config_key: allow matching single-level config
parse_config_key: use skip_prefix instead of starts_with
The code to parse "git -c VAR=VAL cmd" and set configuration
variable for the duration of cmd had two small bugs, which have
been fixed.
* jc/config-case-cmdline-take-2:
config: use git_config_parse_key() in git_config_parse_parameter()
config: move a few helper functions up
This function will be used in a following commit to get the expiration
time of the shared index files from the config, and it is generic
enough to be put in "config.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new function will be used in a following commit to get the
value of the "splitIndex.maxPercentChange" config variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new function will be used in a following commit to know
if we want to use the split index feature or not.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parse_config_key() function was introduced to make it
easier to match "section.subsection.key" variables. It also
handles the simpler "section.key", and the caller is
responsible for distinguishing the two from its
out-parameters.
Most callers who _only_ want "section.key" would just use a
strcmp(var, "section.key"), since there is no parsing
required. However, they may still use parse_config_key() if
their "section" variable isn't a constant (an example of
this is in parse_hide_refs_config).
Using the parse_config_key is a bit clunky, though:
const char *subsection;
int subsection_len;
const char *key;
if (!parse_config_key(var, section, &subsection, &subsection_len, &key) &&
!subsection) {
/* matched! */
}
Instead, let's treat a NULL subsection as an indication that
the caller does not expect one. That lets us write:
const char *key;
if (!parse_config_key(var, section, NULL, NULL, &key)) {
/* matched! */
}
Existing callers should be unaffected, as passing a NULL
subsection would currently segfault.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves us having to repeatedly add in "section_len" (and
also avoids walking over the first part of the string
multiple times for a strlen() and strrchr()).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Jeff King
Stefan Beller
Ævar Arnfjörð Bjarmason
Brandon Williams
Johannes Schindelin
Nguyễn Thái Ngọc Duy
David Turner
Christian Couder