Граф коммитов

69 Коммитов

Автор SHA1 Сообщение Дата
Junio C Hamano 000bce0ee4 Merge branch 'nd/corrupt-worktrees'
"git worktree add" used to fail when another worktree connected to
the same repository was corrupt, which has been corrected.

* nd/corrupt-worktrees:
  worktree add: be tolerant of corrupt worktrees
2019-06-13 13:19:41 -07:00
Nguyễn Thái Ngọc Duy 105df73e71 worktree add: be tolerant of corrupt worktrees
find_worktree() can die() unexpectedly because it uses real_path()
instead of the gentler version. When it's used in 'git worktree add' [1]
and there's a bad worktree, this die() could prevent people from adding
new worktrees.

The "bad" condition to trigger this is when a parent of the worktree's
location is deleted. Then real_path() will complain.

Use the other version so that bad worktrees won't affect 'worktree
add'. The bad ones will eventually be pruned, we just have to tolerate
them for a bit.

[1] added in cb56f55c16 (worktree: disallow adding same path multiple
    times, 2018-08-28), or since v2.20.0. Though the real bug in
    find_worktree() is much older.

Reported-by: Shaheed Haque <shaheedhaque@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-15 14:17:18 +09:00
Junio C Hamano ec2642a2a1 Merge branch 'jt/submodule-repo-is-with-worktree'
The logic to tell if a Git repository has a working tree protects
"git branch -D" from removing the branch that is currently checked
out by mistake.  The implementation of this logic was broken for
repositories with unusual name, which unfortunately is the norm for
submodules these days.  This has been fixed.

* jt/submodule-repo-is-with-worktree:
  worktree: update is_bare heuristics
2019-05-09 00:37:28 +09:00
Jonathan Tan f3534c98e4 worktree: update is_bare heuristics
When "git branch -D <name>" is run, Git usually first checks if that
branch is currently checked out. But this check is not performed if the
Git directory of that repository is not at "<repo>/.git", which is the
case if that repository is a submodule that has its Git directory stored
as "super/.git/modules/<repo>", for example. This results in the branch
being deleted even though it is checked out.

This is because get_main_worktree() in worktree.c sets is_bare on a
worktree only using the heuristic that a repo is bare if the worktree's
path does not end in "/.git", and not bare otherwise. This is_bare code
was introduced in 92718b7438 ("worktree: add details to the worktree
struct", 2015-10-08), following a pre-core.bare heuristic. This patch
does 2 things:

 - Teach get_main_worktree() to use is_bare_repository() instead,
   introduced in 7d1864ce67 ("Introduce is_bare_repository() and
   core.bare configuration variable", 2007-01-07) and updated in
   e90fdc39b6 ("Clean up work-tree handling", 2007-08-01). This solves
   the "git branch -D <name>" problem described above. However...

 - If a repository has core.bare=1 but the "git" command is being run
   from one of its secondary worktrees, is_bare_repository() returns
   false (which is fine, since there is a worktree available). However,
   treating the main worktree as non-bare when it is bare causes issues:
   for example, failure to delete a branch from a secondary worktree
   that is referred to by a main worktree's HEAD, even if that main
   worktree is bare.

   In order to avoid that, also check core.bare when setting is_bare. If
   core.bare=1, trust it, and otherwise, use is_bare_repository().

Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-21 13:58:55 +09:00
Martin Ågren e8805af1c3 setup: fix memory leaks with `struct repository_format`
After we set up a `struct repository_format`, it owns various pieces of
allocated memory. We then either use those members, because we decide we
want to use the "candidate" repository format, or we discard the
candidate / scratch space. In the first case, we transfer ownership of
the memory to a few global variables. In the latter case, we just
silently drop the struct and end up leaking memory.

Introduce an initialization macro `REPOSITORY_FORMAT_INIT` and a
function `clear_repository_format()`, to be used on each side of
`read_repository_format()`. To have a clear and simple memory ownership,
let all users of `struct repository_format` duplicate the strings that
they take from it, rather than stealing the pointers.

Call `clear_...()` at the start of `read_...()` instead of just zeroing
the struct, since we sometimes enter the function multiple times. Thus,
it is important to initialize the struct before calling `read_...()`, so
document that. It's also important because we might not even call
`read_...()` before we call `clear_...()`, see, e.g., builtin/init-db.c.

Teach `read_...()` to clear the struct on error, so that it is reset to
a safe state, and document this. (In `setup_git_directory_gently()`, we
look at `repo_fmt.hash_algo` even if `repo_fmt.version` is -1, which we
weren't actually supposed to do per the API. After this commit, that's
ok.)

We inherit the existing code's combining "error" and "no version found".
Both are signalled through `version == -1` and now both cause us to
clear any partial configuration we have picked up. For "extensions.*",
that's fine, since they require a positive version number. For
"core.bare" and "core.worktree", we're already verifying that we have a
non-negative version number before using them.

Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-01 08:52:00 +09:00
Junio C Hamano e146cc97be Merge branch 'nd/per-worktree-ref-iteration'
The code to traverse objects for reachability, used to decide what
objects are unreferenced and expendable, have been taught to also
consider per-worktree refs of other worktrees as starting points to
prevent data loss.

* nd/per-worktree-ref-iteration:
  git-worktree.txt: correct linkgit command name
  reflog expire: cover reflog from all worktrees
  fsck: check HEAD and reflog from other worktrees
  fsck: move fsck_head_link() to get_default_heads() to avoid some globals
  revision.c: better error reporting on ref from different worktrees
  revision.c: correct a parameter name
  refs: new ref types to make per-worktree refs visible to all worktrees
  Add a place for (not) sharing stuff between worktrees
  refs.c: indent with tabs, not spaces
2018-11-13 22:37:26 +09:00
Nickolai Belakovski d236f12bde worktree: rename is_worktree_locked to worktree_lock_reason
A function prefixed with 'is_' would be expected to return a boolean,
however this function returns a string.

Signed-off-by: Nickolai Belakovski <nbelakovski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-31 11:41:47 +09:00
Nguyễn Thái Ngọc Duy ab3e1f78ae revision.c: better error reporting on ref from different worktrees
Make use of the new ref aliases to pass refs from another worktree
around and access them from the current ref store instead. This does
not change any functionality, but when a problem arises, we would like
the reported messages to mention full ref aliases, like this:

    fatal: bad object worktrees/ztemp/HEAD
    warning: reflog of 'main-worktree/HEAD' references pruned commits

instead of

    fatal: bad object HEAD
    warning: reflog of 'HEAD' references pruned commits

which does not really tell where the refs are from.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-22 13:32:29 +09:00
Nguyễn Thái Ngọc Duy 3a3b9d8cde refs: new ref types to make per-worktree refs visible to all worktrees
One of the problems with multiple worktree is accessing per-worktree
refs of one worktree from another worktree. This was sort of solved by
multiple ref store, where the code can open the ref store of another
worktree and has access to the ref space of that worktree.

The problem with this is reporting. "HEAD" in another ref space is
also called "HEAD" like in the current ref space. In order to
differentiate them, all the code must somehow carry the ref store
around and print something like "HEAD from this ref store".

But that is not feasible (or possible with a _lot_ of work). With the
current design, we pass a reference around as a string (so called
"refname"). Extending this design to pass a string _and_ a ref store
is a nightmare, especially when handling extended SHA-1 syntax.

So we do it another way. Instead of entering a separate ref space, we
make refs from other worktrees available in the current ref space. So
"HEAD" is always HEAD of the current worktree, but then we can have
"worktrees/blah/HEAD" to denote HEAD from a worktree named
"blah". This syntax coincidentally matches the underlying directory
structure which makes implementation a bit easier.

The main worktree has to be treated specially because well... it's
special from the beginning. So HEAD from the main worktree is
acccessible via the name "main-worktree/HEAD" instead of
"worktrees/main/HEAD" because "main" could be just another secondary
worktree.

This patch also makes it possible to specify refs from one worktree in
another one, e.g.

    git log worktrees/foo/HEAD

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-22 13:32:29 +09:00
Eric Sunshine 4c5fa9e6c4 worktree: don't die() in library function find_worktree()
Callers don't expect library function find_worktree() to die(); they
expect it to return the named worktree if found, or NULL if not.
Although find_worktree() itself never invokes die(), it calls
real_pathdup() with 'die_on_error' incorrectly set to 'true', thus will
die() indirectly if the user-provided path is not to real_pathdup()'s
liking. This can be observed, for instance, with any git-worktree
command which searches for an existing worktree:

    $ git worktree unlock foo
    fatal: 'foo' is not a working tree
    $ git worktree unlock foo/bar
    fatal: Invalid path '.../foo': No such file or directory

The first error message is the expected one from "git worktree unlock"
not finding the specified worktree; the second is from find_worktree()
invoking real_pathdup() incorrectly and die()ing prematurely.

Aside from the inconsistent error message between the two cases, this
bug hasn't otherwise been a serious problem since existing callers all
die() anyhow when the worktree can't be found. However, that may not be
true of callers added in the future, so fix find_worktree() to avoid
die()ing.

Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-30 09:28:02 -07:00
Johannes Schindelin 033abf97fc Replace all die("BUG: ...") calls by BUG() ones
In d8193743e0 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae5
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).

The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.

Let's just convert all remaining ones in one fell swoop.

This trick was performed by this invocation:

	sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-06 19:06:13 +09:00
Nguyễn Thái Ngọc Duy ee6763af0a worktree remove: allow it when $GIT_WORK_TREE is already gone
"git worktree remove" basically consists of two things

- delete $GIT_WORK_TREE
- delete $GIT_DIR (which is $SUPER_GIT_DIR/worktrees/something)

If $GIT_WORK_TREE is already gone for some reason, we should be able
to finish the job by deleting $GIT_DIR.

Two notes:

- $GIT_WORK_TREE _can_ be missing if the worktree is locked. In that
  case we must not delete $GIT_DIR because the real $GIT_WORK_TREE may
  be in a usb stick somewhere. This is already handled because we
  check for lock first.

- validate_worktree() is still called because it may do more checks in
  future (and it already does something else, like checking main
  worktree, but that's irrelevant in this case)

Noticed-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-12 13:13:35 -08:00
Nguyễn Thái Ngọc Duy 9c620fc7a6 worktree.c: add update_worktree_location()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-12 13:13:35 -08:00
Nguyễn Thái Ngọc Duy 4ddddc1f1d worktree.c: add validate_worktree()
This function is later used by "worktree move" and "worktree remove"
to ensure that we have a good connection between the repository and
the worktree. For example, if a worktree is moved manually, the
worktree location recorded in $GIT_DIR/worktrees/.../gitdir is
incorrect and we should not move that one.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-24 11:04:26 -08:00
Junio C Hamano e7e456f500 Merge branch 'bc/object-id'
Conversion from uchar[20] to struct object_id continues.

* bc/object-id: (25 commits)
  refs/files-backend: convert static functions to object_id
  refs: convert read_raw_ref backends to struct object_id
  refs: convert peel_object to struct object_id
  refs: convert resolve_ref_unsafe to struct object_id
  worktree: convert struct worktree to object_id
  refs: convert resolve_gitlink_ref to struct object_id
  Convert remaining callers of resolve_gitlink_ref to object_id
  sha1_file: convert index_path and index_fd to struct object_id
  refs: convert reflog_expire parameter to struct object_id
  refs: convert read_ref_at to struct object_id
  refs: convert peel_ref to struct object_id
  builtin/pack-objects: convert to struct object_id
  pack-bitmap: convert traverse_bitmap_commit_list to object_id
  refs: convert dwim_log to struct object_id
  builtin/reflog: convert remaining unsigned char uses to object_id
  refs: convert dwim_ref and expand_ref to struct object_id
  refs: convert read_ref and read_ref_full to object_id
  refs: convert resolve_refdup and refs_resolve_refdup to struct object_id
  Convert check_connected to use struct object_id
  refs: update ref transactions to use struct object_id
  ...
2017-11-06 14:24:27 +09:00
Jeff King dbd2b55cb7 worktree: handle broken symrefs in find_shared_symref()
The refs_resolve_ref_unsafe() function may return NULL even
with a REF_ISSYMREF flag if a symref points to a broken ref.
As a result, it's possible for find_shared_symref() to
segfault when it passes NULL to strcmp().

This is hard to trigger for most code paths. We typically
pass HEAD to the function as the symref to resolve, and
programs like "git branch" will bail much earlier if HEAD
isn't valid.

I did manage to trigger it through one very obscure
sequence:

  # You have multiple notes refs which conflict.
  git notes add -m base
  git notes --ref refs/notes/foo add -m foo

  # There's left-over cruft in NOTES_MERGE_REF that
  # makes it a broken symref (in this case we point
  # to a syntactically invalid ref).
  echo "ref: refs/heads/master.lock" >.git/NOTES_MERGE_REF

  # You try to merge the notes. We read the broken value in
  # order to complain that another notes-merge is
  # in-progress, but we segfault in find_shared_symref().
  git notes merge refs/notes/foo

This is obviously silly and almost certainly impossible to
trigger accidentally, but it does show that the bug is
triggerable from at least one code path. In addition, it
would trigger if we saw a transient filesystem error when
resolving the pointed-to ref.

We can fix this by treating NULL the same as a non-matching
symref. Arguably we'd prefer to know if a symref points to
"refs/heads/foo", but "refs/heads/foo" is broken. But
refs_resolve_ref_unsafe() isn't capable of giving us that
information, so this is the best we can do.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-21 21:30:07 +09:00
brian m. carlson 49e61479be refs: convert resolve_ref_unsafe to struct object_id
Convert resolve_ref_unsafe to take a pointer to struct object_id by
converting one remaining caller to use struct object_id, removing the
temporary NULL pointer check in expand_ref, converting the declaration
and definition, and applying the following semantic patch:

@@
expression E1, E2, E3, E4;
@@
- resolve_ref_unsafe(E1, E2, E3.hash, E4)
+ resolve_ref_unsafe(E1, E2, &E3, E4)

@@
expression E1, E2, E3, E4;
@@
- resolve_ref_unsafe(E1, E2, E3->hash, E4)
+ resolve_ref_unsafe(E1, E2, E3, E4)

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-16 11:05:51 +09:00
brian m. carlson 0f05154c70 worktree: convert struct worktree to object_id
Convert the head_sha1 member to be head_oid instead.  This is required
to convert resolve_ref_unsafe.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-16 11:05:51 +09:00
René Scharfe e691b027b6 refs: pass NULL to refs_resolve_ref_unsafe() if hash is not needed
This allows us to get rid of two write-only variables, one of them
being a SHA1 buffer.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-24 10:18:18 +09:00
Junio C Hamano 8a044c7f1d Merge branch 'nd/prune-in-worktree'
"git gc" and friends when multiple worktrees are used off of a
single repository did not consider the index and per-worktree refs
of other worktrees as the root for reachability traversal, making
objects that are in use only in other worktrees to be subject to
garbage collection.

* nd/prune-in-worktree:
  refs.c: reindent get_submodule_ref_store()
  refs.c: remove fallback-to-main-store code get_submodule_ref_store()
  rev-list: expose and document --single-worktree
  revision.c: --reflog add HEAD reflog from all worktrees
  files-backend: make reflog iterator go through per-worktree reflog
  revision.c: --all adds HEAD from all worktrees
  refs: remove dead for_each_*_submodule()
  refs.c: move for_each_remote_ref_submodule() to submodule.c
  revision.c: use refs_for_each*() instead of for_each_*_submodule()
  refs: add refs_head_ref()
  refs: move submodule slash stripping code to get_submodule_ref_store
  refs.c: refactor get_submodule_ref_store(), share common free block
  revision.c: --indexed-objects add objects from all worktrees
  revision.c: refactor add_index_objects_to_pending()
  refs.c: use is_dir_sep() in resolve_gitlink_ref()
  revision.h: new flag in struct rev_info wrt. worktree-related refs
2017-09-19 10:47:53 +09:00
Junio C Hamano 79553b94f9 Merge branch 'nd/worktree-kill-parse-ref'
"git branch -M a b" while on a branch that is completely unrelated
to either branch a or branch b misbehaved when multiple worktree
was in use.  This has been fixed.

* nd/worktree-kill-parse-ref:
  branch: fix branch renaming not updating HEADs correctly
2017-09-10 17:08:24 +09:00
Nguyễn Thái Ngọc Duy d0c39a49cc revision.c: --all adds HEAD from all worktrees
Unless single_worktree is set, --all now adds HEAD from all worktrees.

Since reachable.c code does not use setup_revisions(), we need to call
other_head_refs_submodule() explicitly there to have the same effect on
"git prune", so that we won't accidentally delete objects needed by some
other HEADs.

A new FIXME is added because we would need something like

    int refs_other_head_refs(struct ref_store *, each_ref_fn, cb_data);

in addition to other_head_refs() to handle it, which might require

    int get_submodule_worktrees(const char *submodule, int flags);

It could be a separate topic to reduce the scope of this one.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-24 14:56:43 -07:00
Nguyễn Thái Ngọc Duy 31824d180d branch: fix branch renaming not updating HEADs correctly
There are two bugs that sort of work together and cause
problems. Let's start with one in replace_each_worktree_head_symref.

Before fa099d2322 (worktree.c: kill parse_ref() in favor of
refs_resolve_ref_unsafe() - 2017-04-24), this code looks like this:

    if (strcmp(oldref, worktrees[i]->head_ref))
            continue;
    set_worktree_head_symref(...);

After fa099d2322, it is possible that head_ref can be NULL. However,
the updated code takes the wrong exit. In the error case (NULL
head_ref), we should "continue;" to the next worktree. The updated
code makes us _skip_ "continue;" and update HEAD anyway.

The NULL head_ref is triggered by the second bug in add_head_info (in
the same commit). With the flag RESOLVE_REF_READING, resolve_ref_unsafe()
will abort if it cannot resolve the target ref. For orphan checkouts,
HEAD always points to an unborned branch, resolving target ref will
always fail. Now we have NULL head_ref. Now we always update HEAD.

Correct the logic in replace_ function so that we don't accidentally
update HEAD on error. As it turns out, correcting the logic bug above
breaks branch renaming completely, thanks to the second bug.

"git branch -[Mm]" does two steps (on a normal checkout, no orphan!):

 - rename the branch on disk (e.g. refs/heads/abc to refs/heads/def)
 - update HEAD if it points to the branch being renamed.

At the second step, since the branch pointed to by HEAD (e.g. "abc") no
longer exists on disk, we run into a temporary orphan checkout situation
that has been just corrected to _not_ update HEAD. But we need to update
HEAD since it's not actually an orphan checkout. We need to update HEAD
to move out of that orphan state.

Correct add_head_info(), remove RESOLVE_REF_READING flag. With the flag
gone, we should always return good "head_ref" in orphan checkouts (either
temporary or permanent). With good head_ref, things start to work again.

Noticed-by: Nish Aravamudan <nish.aravamudan@canonical.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-24 14:15:18 -07:00
Brandon Williams b337172c83 path: convert strbuf_git_common_path to take a 'struct repository'
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-23 18:24:34 -07:00
Junio C Hamano 849e671b52 Merge branch 'js/plug-leaks'
Fix memory leaks pointed out by Coverity (and people).

* js/plug-leaks: (26 commits)
  checkout: fix memory leak
  submodule_uses_worktrees(): plug memory leak
  show_worktree(): plug memory leak
  name-rev: avoid leaking memory in the `deref` case
  remote: plug memory leak in match_explicit()
  add_reflog_for_walk: avoid memory leak
  shallow: avoid memory leak
  line-log: avoid memory leak
  receive-pack: plug memory leak in update()
  fast-export: avoid leaking memory in handle_tag()
  mktree: plug memory leaks reported by Coverity
  pack-redundant: plug memory leak
  setup_discovered_git_dir(): plug memory leak
  setup_bare_git_dir(): help static analysis
  split_commit_in_progress(): simplify & fix memory leak
  checkout: fix memory leak
  cat-file: fix memory leak
  mailinfo & mailsplit: check for EOF while parsing
  status: close file descriptor after reading git-rebase-todo
  difftool: address a couple of resource/memory leaks
  ...
2017-05-29 12:34:44 +09:00
Junio C Hamano 4b44b7b1df Merge branch 'nd/worktree-kill-parse-ref'
"git gc" did not interact well with "git worktree"-managed
per-worktree refs.

* nd/worktree-kill-parse-ref:
  refs: kill set_worktree_head_symref()
  worktree.c: kill parse_ref() in favor of refs_resolve_ref_unsafe()
  refs: introduce get_worktree_ref_store()
  refs: add REFS_STORE_ALL_CAPS
  refs.c: make submodule ref store hashmap generic
  environment.c: fix potential segfault by get_git_common_dir()
2017-05-16 11:51:51 +09:00
Johannes Schindelin d32de66a07 submodule_uses_worktrees(): plug memory leak
There is really no reason why we would need to hold onto the allocated
string longer than necessary.

Reported by Coverity.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-08 12:18:20 +09:00
Nguyễn Thái Ngọc Duy fa099d2322 worktree.c: kill parse_ref() in favor of refs_resolve_ref_unsafe()
The manual parsing code is replaced with a call to refs_resolve_ref_unsafe().
The manual parsing code must die because only refs/files-backend.c
should do that.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-24 21:28:55 -07:00
Jeff King e4da43b1f0 prefix_filename: return newly allocated string
The prefix_filename() function returns a pointer to static
storage, which makes it easy to use dangerously. We already
fixed one buggy caller in hash-object recently, and the
calls in apply.c are suspicious (I didn't dig in enough to
confirm that there is a bug, but we call the function once
in apply_all_patches() and then again indirectly from
parse_chunk()).

Let's make it harder to get wrong by allocating the return
value. For simplicity, we'll do this even when the prefix is
empty (and we could just return the original file pointer).
That will cause us to allocate sometimes when we wouldn't
otherwise need to, but this function isn't called in
performance critical code-paths (and it already _might_
allocate on any given call, so a caller that cares about
performance is questionable anyway).

The downside is that the callers need to remember to free()
the result to avoid leaking. Most of them already used
xstrdup() on the result, so we know they are OK. The
remainder have been converted to use free() as appropriate.

I considered retaining a prefix_filename_unsafe() for cases
where we know the static lifetime is OK (and handling the
cleanup is awkward). This is only a handful of cases,
though, and it's not worth the mental energy in worrying
about whether the "unsafe" variant is OK to use in any
situation.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-21 11:18:41 -07:00
Jeff King 116fb64e43 prefix_filename: drop length parameter
This function takes the prefix as a ptr/len pair, but in
every caller the length is exactly strlen(ptr). Let's
simplify the interface and just take the string. This saves
callers specifying it (and in some cases handling a NULL
prefix).

In a handful of cases we had the length already without
calling strlen, so this is technically slower. But it's not
likely to matter (after all, if the prefix is non-empty
we'll allocate and copy it into a buffer anyway).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-21 11:12:53 -07:00
Junio C Hamano ba37c92df9 Merge branch 'js/realpath-pathdup-fix'
Git v2.12 was shipped with an embarrassing breakage where various
operations that verify paths given from the user stopped dying when
seeing an issue, and instead later triggering segfault.

* js/realpath-pathdup-fix:
  real_pathdup(): fix callsites that wanted it to die on error
  t1501: demonstrate NULL pointer access with invalid GIT_WORK_TREE
2017-03-12 23:21:33 -07:00
Junio C Hamano fc32293502 Merge branch 'rs/strbuf-add-real-path'
An helper function to make it easier to append the result from
real_path() to a strbuf has been added.

* rs/strbuf-add-real-path:
  strbuf: add strbuf_add_real_path()
  cocci: use ALLOC_ARRAY
2017-03-10 13:24:23 -08:00
Johannes Schindelin ce83eadd9a real_pathdup(): fix callsites that wanted it to die on error
In 4ac9006f83 (real_path: have callers use real_pathdup and
strbuf_realpath, 2016-12-12), we changed the xstrdup(real_path())
pattern to use real_pathdup() directly.

The problem with this change is that real_path() calls
strbuf_realpath() with die_on_error = 1 while real_pathdup() calls
it with die_on_error = 0. Meaning that in cases where real_path()
causes Git to die() with an error message, real_pathdup() is silent
and returns NULL instead.

The callers, however, are ill-prepared for that change, as they expect
the return value to be non-NULL (and otherwise the function died
with an appropriate error message).

Fix this by extending real_pathdup()'s signature to accept the
die_on_error flag and simply pass it through to strbuf_realpath(),
and then adjust all callers after a careful audit whether they would
handle NULLs well.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-08 14:38:41 -08:00
René Scharfe 3f64699ffd cocci: use ALLOC_ARRAY
Add a semantic patch for using ALLOC_ARRAY to allocate arrays and apply
the transformation on the current source tree.  The macro checks for
multiplication overflow and infers the element size automatically; the
result is shorter and safer code.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-27 11:02:05 -08:00
Junio C Hamano 6f1c08bdb7 Merge branch 'rs/absolute-pathdup'
Code cleanup.

* rs/absolute-pathdup:
  use absolute_pathdup()
  abspath: add absolute_pathdup()
2017-02-02 13:36:55 -08:00
René Scharfe 0aaad415bc use absolute_pathdup()
Apply the semantic patch for converting callers that duplicate the
result of absolute_path() to call absolute_pathdup() instead, which
avoids an extra string copy to a static buffer.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-27 10:18:15 -08:00
Junio C Hamano 55d128ae06 Merge branch 'bw/grep-recurse-submodules'
"git grep" has been taught to optionally recurse into submodules.

* bw/grep-recurse-submodules:
  grep: search history of moved submodules
  grep: enable recurse-submodules to work on <tree> objects
  grep: optionally recurse into submodules
  grep: add submodules as a grep source type
  submodules: load gitmodules file from commit sha1
  submodules: add helper to determine if a submodule is initialized
  submodules: add helper to determine if a submodule is populated
  real_path: canonicalize directory separators in root parts
  real_path: have callers use real_pathdup and strbuf_realpath
  real_path: create real_pathdup
  real_path: convert real_path_internal to strbuf_realpath
  real_path: resolve symlinks by hand
2017-01-18 15:12:11 -08:00
Stefan Beller 7c4be458b1 worktree: initialize return value for submodule_uses_worktrees
When the worktrees directory is empty, the `ret` will be returned
uninitialized. Fix it by initializing the value.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-27 13:59:49 -08:00
Brandon Williams 4ac9006f83 real_path: have callers use real_pathdup and strbuf_realpath
Migrate callers of real_path() who duplicate the retern value to use
real_pathdup or strbuf_realpath.

Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-12 15:22:32 -08:00
Stefan Beller 1a248cf21d worktree: check if a submodule uses worktrees
In a later patch we want to move around the the git directory of
a submodule. Both submodules as well as worktrees are involved in
placing git directories at unusual places, so their functionality
may collide. To react appropriately to situations where worktrees
in submodules are in use, offer a new function to query the
a submodule if it uses the worktree feature.

An earlier approach:
  "Implement submodule_get_worktrees and just count them", however:
  This can be done cheaply (both in new code to write as well as run time)
  by obtaining the list of worktrees based off that submodules git
  directory. However as we have loaded the variables for the current
  repository, the values in the submodule worktree
  can be wrong, e.g.
  * core.ignorecase may differ between these two repositories
  * the ref resolution is broken (refs/heads/branch in the submodule
    resolves to the sha1 value of the `branch` in the current repository
    that may not exist or have another sha1)

The implementation here is just checking for any files in
$GIT_COMMON_DIR/worktrees for the submodule, which ought to be sufficient
if the submodule is using the current repository format, which we also
check.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-12 15:15:07 -08:00
Nguyễn Thái Ngọc Duy 4df1d4d466 worktree list: keep the list sorted
It makes it easier to write tests for. But it should also be good for
the user since locating a worktree by eye would be easier once they
notice this.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-11-28 13:18:51 -08:00
Nguyễn Thái Ngọc Duy 4fff1ef7ff worktree.c: get_worktrees() takes a new flag argument
This is another no-op patch, in preparation for get_worktrees() to do
optional things, like sorting.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-11-28 13:18:51 -08:00
Nguyễn Thái Ngọc Duy a234563a3b get_worktrees() must return main worktree as first item even on error
This is required by git-worktree.txt, stating that the main worktree is
the first line (especially in --porcelain mode when we can't just change
behavior at will).

There's only one case when get_worktrees() may skip main worktree, when
parse_ref() fails. Update the code so that we keep first item as main
worktree and return something sensible in this case:

 - In user-friendly mode, since we're not constraint by anything,
   returning "(error)" should do the job (we already show "(detached
   HEAD)" which is not machine-friendly). Actually errors should be
   printed on stderr by parse_ref() (*)

 - In plumbing mode, we do not show neither 'bare', 'detached' or
   'branch ...', which is possible by the format description if I read
   it right.

Careful readers may realize that when the local variable "head_ref" in
get_main_worktree() is emptied, add_head_info() will do nothing to
wt->head_sha1. But that's ok because head_sha1 is zero-ized in the
previous patch.

(*) Well, it does not. But it's supposed to be a stop gap implementation
    until we can reuse refs code to parse "ref: " stuff in HEAD, from
    resolve_refs_unsafe(). Now may be the time since refs refactoring is
    mostly done.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-11-28 13:18:51 -08:00
Nguyễn Thái Ngọc Duy f054996d83 worktree.c: zero new 'struct worktree' on allocation
This keeps things a bit simpler when we add more fields, knowing that
default values are always zero.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-11-23 08:53:11 -08:00
Dennis Kaarsemaker 171c646f8c worktree: allow the main brach of a bare repository to be checked out
In bare repositories, get_worktrees() still returns the main repository,
so git worktree list can show it. ignore it in find_shared_symref so we
can still check out the main branch.

Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-14 09:58:58 -07:00
Junio C Hamano 2c608e0f7c Merge branch 'nd/worktree-lock'
"git worktree prune" protected worktrees that are marked as
"locked" by creating a file in a known location.  "git worktree"
command learned a dedicated command pair to create and remove such
a file, so that the users do not have to do this with editor.

* nd/worktree-lock:
  worktree.c: find_worktree() search by path suffix
  worktree: add "unlock" command
  worktree: add "lock" command
  worktree.c: add is_worktree_locked()
  worktree.c: add is_main_worktree()
  worktree.c: add find_worktree()
2016-07-28 10:34:42 -07:00
Junio C Hamano fc08d2d4ad Merge branch 'rs/worktree-use-strbuf-absolute-path'
Code simplification.

* rs/worktree-use-strbuf-absolute-path:
  worktree: use strbuf_add_absolute_path() directly
2016-07-25 14:13:37 -07:00
René Scharfe fd2e7dafde worktree: use strbuf_add_absolute_path() directly
absolute_path() is a wrapper for strbuf_add_absolute_path().  Call the
latter directly for adding absolute paths to a strbuf.  That's shorter
and avoids an extra string copy.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-12 15:11:01 -07:00
Nguyễn Thái Ngọc Duy 080739ba1d worktree.c: find_worktree() search by path suffix
This allows the user to do something like "worktree lock foo" or
"worktree lock to/foo" instead of "worktree lock /long/path/to/foo" if
it's unambiguous.

With completion support it could be quite convenient. While this base
name search can be done in the same worktree iteration loop, the code is
split into a separate function for clarity.

Suggested-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-08 15:31:04 -07:00
Junio C Hamano 7a738b40f6 Merge branch 'nd/worktree-cleanup-post-head-protection'
Further preparatory clean-up for "worktree" feature continues.

* nd/worktree-cleanup-post-head-protection:
  worktree: simplify prefixing paths
  worktree: avoid 0{40}, too many zeroes, hard to read
  worktree.c: use is_dot_or_dotdot()
  git-worktree.txt: keep subcommand listing in alphabetical order
  worktree.c: rewrite mark_current_worktree() to avoid strbuf
  completion: support git-worktree
2016-07-06 13:38:11 -07:00