The actual external command to run for mergetool backend can be
specified with difftool/mergetool.$name.cmd configuration
variables, but this mechanism was ignored for the backends we
natively support.
* da/mergetool-custom:
mergetool--lib: Allow custom commands to override built-ins
Allow users to override the default commands provided by the
mergetools/* scriptlets.
Users occasionally run into problems where they expect to be
able to override the built-in tool names. The documentation
does not explicitly mention that built-ins cannot be overridden,
so it's easy to assume that it should work.
Lift this restriction so that built-in tools are handled the
same way as user-configured tools. Add tests to guarantee this
behavior.
A nice benefit of this change is that it protects users from
having future versions of git trump their custom configuration
with a new built-in tool.
C.f.:
http://stackoverflow.com/questions/7435002/mergetool-from-gitconfig-being-ignoredhttp://thread.gmane.org/gmane.comp.version-control.msysgit/13188http://thread.gmane.org/gmane.comp.version-control.git/148267
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"stash apply" directly calls a backend merge function which does not
automatically invoke rerere. This confuses mergetool when leftover
rerere state is left behind from previous merges.
Invoke rerere explicitly when we encounter a conflict during stash
apply. This turns the test introduced by the previous commit to
succeed.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to make sure that a conflicted "stash apply" invokes
rerere to record the conflicts and resolve the the files it can
(the current code doesn't, so the test is marked as failing).
Without correct state recorded for rerere, mergetool may be
confused, causing it to think no files have conflicts even though
they do. This condition is not verified by this test since a
subsequent commit will change the behavior to enable rerere for
stash conflicts.
Also, the next test expected us to finish up with a reset, which is
impossible to do if we fail (as we must) and it's an unreasonable
expectation anyway. Begin the next test with a reset of its own
instead.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some merge tools cannot cope when $LOCAL, $BASE, or $REMOTE are missing.
$BASE can be missing when two branches independently add the same
filename.
Provide an empty file to make these tools happy.
When a delete/modify conflict occurs, $LOCAL and $REMOTE can also be
missing. We have special case code to handle such case so this change
may not affect that codepath, but try to be consistent and create an
empty file for them anyway.
Reported-by: Jason Wenger <jcwenger@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mergetool now treats its path arguments as a pathspec (like other git
subcommands), restricting action to the given files and directories.
Files matching the pathspec are filtered so mergetool only acts on
unmerged paths; previously it would assume each path argument was in an
unresolved state, and get confused when it couldn't check out their
other stages.
Running "git mergetool subdir" will prompt to resolve all conflicted
blobs under subdir.
Signed-off-by: Jonathon Mah <me@JonathonMah.com>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index has conflicted submodules, mergetool used to mildly
clobber the module, renaming it to mymodule.BACKUP.nnnn, then failing to
copy it non-recursively.
Recognize submodules and offer a resolution instead:
Submodule merge conflict for 'Shared':
{local}: submodule commit ad9f12e3e6205381bf2163a793d1e596a9e211d0
{remote}: submodule commit f5893fb70ec5646efcd9aa643c5136753ac89253
Use (l)ocal or (r)emote, or (a)bort?
Selecting a commit will stage it, but not update the submodule (as git
does had there been no conflict). Type changes are also supported,
should the path be a submodule on one side, and a file, symlink,
directory, or deleted on the other.
Signed-off-by: Jonathon Mah <me@JonathonMah.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since bb0a484 (mergetool: Skip autoresolved paths, 2010-08-17),
mergetool uses different ways of figuring out the list of files with
merge conflicts depending on whether rerere is active. If rerere is
active, mergetool will use 'git rerere status' to list the files with
remaining conflicts. However, the output from that command does not
list conflicts of types that rerere does not handle, such as
modify/remove conflicts.
Another problem with solely relying on the output from 'git rerere
status' is that, for new conflicts that are not yet known to rerere,
the output from the command will list the files even after adding them
to the index. This means that if the conflicts in some files have been
resolved and 'git mergetool' is run again, it will ask the user
something like the following for each of those files.
file1: file does not need merging
Continue merging other unresolved paths (y/n) ?
Solve both of these problems by replacing the call to 'git rerere
status' with a call to the new 'git rerere remaining' that was
introduced in the previous commit.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using `cd dir && (...) && cd..` use `(cd dir && ...)`
This ensures that the test doesn't get caught in the subdirectory if
there is an error in the subshell.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When mergetool is run without path limiters it loops
over each entry in 'git ls-files -u'. This includes
autoresolved paths.
Teach mergetool to only merge files listed in 'rerere status'
when rerere is enabled.
There are some subtle but harmless changes in behavior.
We now call cd_to_toplevel when no paths are given.
We do this because 'rerere status' paths are always relative
to the root. This is beneficial for the non-rerere use as
well in that mergetool now runs against all unmerged files
regardless of the current directory.
This also slightly tweaks the output when run without paths
to be more readable.
The old output:
Merging the files: foo
bar
baz
The new output:
Merging:
foo
bar
baz
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous fix to mergetool to use checkout-index instead of cat-file
broke running mergetool anywhere except the root of the repository.
This fixes it by using the correct relative paths for temporary files
and index paths.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, git mergetool used cat-file which does not perform git to
worktree conversion. This changes mergetool to use git checkout-index
instead which means that the temporary files used for mergetool use the
correct line endings for the platform.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".
This is useful to
- make sure the test does not fail because of a signal,
e.g. SIGSEGV, and
- advertise the use of "test_must_fail" for new tests.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
David Aguilar
Phil Hord
Jonathon Mah
Martin von Zweigbergk
Jonathan Nieder
Brian Gernhardt
Charles Bailey
Nanako Shiraishi
Stephan Beyer