Lately Homebrew learned to automagically clean up information about
outdated packages during other 'brew' commands, which might be useful
for the avarage user, but is a waste of time in CI build jobs, because
the next build jobs will start from the exact same image containing
the same outdated packages anyway.
Export HOMEBREW_NO_INSTALL_CLEANUP=1 to disable this auto cleanup feature,
shaving off about 20-30s from the time needed to install dependencies
in our macOS build jobs on Travis CI.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lately our GCC macOS build job on Travis CI has been erroring out
while installing dependencies with:
+brew link gcc@8
Error: No such keg: /usr/local/Cellar/gcc@8
The command "ci/install-dependencies.sh" failed and exited with 1 during .
Now, while gcc@8 is still pre-installed (but not linked) and would be
perfectly usable in the Travis CI macOS image we use [1], it's at
version 8.2. However, when installing dependencies we first
explicitly run 'brew update', which spends over two minutes to update
itself and information about the available packages, and it learns
about GCC 8.3. After that point gcc@8 exclusively refers to v8.3,
and, unfortunately, 'brew' is just too dumb to be able to do anything
with the still installed 8.2 package, and the subsequent 'brew link
gcc@8' fails. (Even 'brew uninstall gcc@8' fails with the same
error!)
Don't run 'brew update' to keep the already installed GCC 8.2 'brew
link'-able. Note that in addition we have to 'export
HOMEBREW_NO_AUTO_UPDATE=1' first, because 'brew' is so very helpful
that it would implicitly run update for us on the next 'brew install
<pkg>' otherwise.
Disabling 'brew update' has additional benefits:
- It shaves off 2-3mins from the ~4mins currently spent on
installing dependencies, and the macOS build jobs have always been
prone to exceeding the time limit on Travis CI.
- Our builds won't suddenly break because of the occasional Homebrew
breakages [2].
The drawback is that we'll be stuck with slightly older versions of
the packages that we install via Homebrew (Git-LFS 2.5.2 and Perforce
2018.1; they are currently at 2.7.2 and 2019.1, respectively). We
might want to reconsider this decision as time goes on and/or switch
to a more recent macOS image as they become available.
[1] 2000ac9fbf (travis-ci: switch to Xcode 10.1 macOS image,
2019-01-17)
[2] See e.g. a1ccaedd62 (travis-ci: make the OSX build jobs' 'brew
update' more quiet, 2019-02-02) or
https://public-inbox.org/git/20180907032002.23366-1-szeder.dev@gmail.com/T/#+u
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
List the short form of options (e.g.: '-l') before the long form (e.g.
'--local').
This is to match the doc of git-add, git-commit, git-clean, git-branch...
Signed-off-by: Quentin Nerden <quentin.nerden@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make the doc of git-clone easier to read,
refer to the long form of the options
(it is easier to guess what '--verbose' is doing than '-v').
Signed-off-by: Quentin Nerden <quentin.nerden@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's been behaving so since 6a536e2076 (git: treat "git -C '<path>'"
as a no-op when <path> is empty, 2015-03-06).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `exec` command is specific to the interactive backend, therefore it
does not make sense for non-interactive rebases to heed that config
setting.
We still want to error out if a non-interactive rebase is started with
`--reschedule-failed-exec`, of course.
Reported by Vas Sudanagunta via:
https://github.com/git/git/commit/969de3ff0e0#commitcomment-33257187
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make sure that the previously displayed progress line is completely
covered up when the new line is shorter, commit 545dc345eb (progress:
break too long progress bar lines, 2019-04-12) added a bunch of
calculations to figure out how many characters it needs to overwrite
with spaces.
Use the just introduced term_clear_line() helper function to, well,
clear the last line, making all these calculations unnecessary, and
thus simplifying the code considerably.
Three tests in 't5541-http-push-smart.sh' 'grep' for specific text
shown in the progress lines at the beginning of the line, but now
those lines begin either with the ANSI escape sequence or with the
terminal width worth of space characters clearing the line. Relax the
'grep' patterns to match anywhere on the line. Note that only two of
these three tests fail without relaxing their 'grep' pattern, but the
third looks for the absence of the pattern, so it still succeeds, but
without the adjustment would potentially hide future regressions.
Note also that with this change we no longer need the length of the
previously displayed progress line, so the strbuf added to 'struct
progress' in d53ba841d4 (progress: assemble percentage and counters in
a strbuf before printing, 2019-04-05) is not strictly necessary
anymore. We still keep it, though, as it avoids allocating and
releasing a strbuf each time the progress is updated.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a command with the 'exec' instruction during an
interactive rebase session, or for a range of commits using 'git
rebase -x', the output can be a bit garbled when the name of the
command is short enough:
$ git rebase -x true HEAD~5
Executing: true
Executing: true
Executing: true
Executing: true
Executing: true)
Successfully rebased and updated refs/heads/master.
Note the ')' at the end of the last line. It gets more garbled as the
range of commits increases:
$ git rebase -x true HEAD~50
Executing: true)
[ repeated 3 more times ]
Executing: true0)
[ repeated 44 more times ]
Executing: true00)
Successfully rebased and updated refs/heads/master.
Those extra numbers and ')' are remnants of the previously displayed
"Rebasing (N/M)" progress lines that are usually completely
overwritten by the "Executing: <cmd>" lines, unless 'cmd' is short and
the "N/M" part is long.
Make sure that the previously displayed "Rebasing (N/M)" line is
cleared by using the term_clear_line() helper function added in the
previous patch. Do so only when not being '--verbose', because in
that case these "Rebasing (N/M)" lines are not printed as progress
(i.e. as lines with '\r' at the end), but as "regular" output (with
'\n' at the end).
A couple of other rebase commands print similar messages, e.g.
"Stopped at <abbrev-oid>... <subject>" for the 'edit' or 'break'
commands, or the "Successfully rebased and updated <full-ref>." at the
very end. These are so long that they practically always overwrite
that "Rebasing (N/M)" progress line, but let's be prudent, and clear
the last line before printing these, too.
In 't3420-rebase-autostash.sh' two helper functions prepare the
expected output of four tests that check the full output of 'git
rebase' and thus are affected by this change, so adjust their
expectations to account for the new line clearing.
Note that this patch doesn't completely eliminate the possibility of
similar garbled outputs, e.g. some error messages from rebase or the
"Auto-merging <file>" message from within the depths of the merge
machinery might not be long enough to completely cover the last
"Rebasing (N/M)" line. This patch doesn't do anything about them,
because dealing with them individually would result in way too much
churn, while having a catch-all term_clear_line() call in the common
code path of pick_commits() would hide the "Rebasing (N/M)" line way
too soon, and it would either flicker or be invisible.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When run using GIT_TEST_PROTOCOL_VERSION=2, a test in t5551 fails
because 4 POSTs (probe, ls-refs, probe, fetch) are sent instead of 2
(probe, fetch).
One way to resolve this would be to relax the condition (from "= 2" to
greater than 1, say), but upon further inspection, the test probably
shouldn't be counting the number of POSTs. This test states that large
requests are split across POSTs, but this is not correct; the main
change is that chunked transfer encoding is used, but the request is
still contained within one POST. (The test coincidentally works because
Git indeed sends 2 POSTs in the case of a large request, but that is
because, as stated above, the first POST is a probing RPC - see
post_rpc() in remote-curl.c for more information.)
Therefore, instead of counting POSTs, check that chunked transfer
encoding is used. This also has the desirable side effect of passing
with GIT_TEST_PROTOCOL_VERSION=2.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The two tests 'invalid Content-Type rejected' and 'server-side error
detected' in 't5551-http-fetch-smart.sh' use "plain" 'grep' to check
that 'git clone' failed with the expected error message, but the
messages they are checking are translated, and, consequently, these
tests fail when the test script is run with GIT_TEST_GETTEXT_POISON
enabled.
Use 'test_i18ngrep' instead.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling
git submodule foreach --recursive <subcommand> --<option>
leads to an error stating that the option --<option> is unknown to
submodule--helper. That is of course only, when <option> is not a valid
option for git submodule foreach.
The reason for this is, that above call is internally translated into a
call to submodule--helper:
git submodule--helper foreach --recursive \
-- <subcommand> --<option>
This call starts by executing the subcommand with its option inside the
first level submodule and continues by calling the next iteration of
the submodule foreach call
git --super-prefix <submodulepath> submodule--helper \
foreach --recursive <subcommand> --<option>
inside the first level submodule. Note that the double dash in front of
the subcommand is missing.
This problem starts to arise only recently, as the
PARSE_OPT_KEEP_UNKNOWN flag for the argument parsing of git submodule
foreach was removed in commit a282f5a906. Hence, the unknown option is
complained about now, as the argument parsing is not properly ended by
the double dash.
This commit fixes the problem by adding the double dash in front of the
subcommand during the recursion.
Signed-off-by: Morian Sonnet <moriansonnet@googlemail.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a couple of places where we want to clear the last line on
the terminal, e.g. when a progress bar line is overwritten by a
shorter line, then the end of that progress line would remain visible,
unless we cover it up.
In 'progress.c' we did this by always appending a fixed number of
space characters to the next line (even if it was not shorter than the
previous), but as it turned out that fixed number was not quite large
enough, see the fix in 9f1fd84e15 (progress: clear previous progress
update dynamically, 2019-04-12). From then on we've been keeping
track of the length of the last displayed progress line and appending
the appropriate number of space characters to the next line, if
necessary, but, alas, this approach turned out to be error prone, see
the fix in 1aed1a5f25 (progress: avoid empty line when breaking the
progress line, 2019-05-19). The next patch in this series is about to
fix a case where we don't clear the last line, and on occasion do end
up with such garbage at the end of the line. It would be great if we
could do that without the need to deal with that without meticulously
computing the necessary number of space characters.
So add a helper function to clear the last line on the terminal using
an ANSI escape sequence, which has the advantage to clear the whole
line no matter how wide it is, even after the terminal width changed.
Such an escape sequence is not available on dumb terminals, though, so
in that case fall back to simply print a whole terminal width (as
reported by term_columns()) worth of space characters.
In 'editor.c' launch_specified_editor() already used this ANSI escape
sequence, so replace it with a call to this function.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test 'rebase -i respects rebase.missingCommitsCheck = warn' is
mainly interested in the warning about the dropped commits, but it
checks the whole output of 'git rebase', including progress lines and
what not that are not at all relevant to 'rebase.missingCommitsCheck',
but make it necessary to update this test whenever e.g. the way we
show progress is updated (as it will happen in one of the later
patches of this series).
Modify the test to verify only the first four lines of 'git rebase's
output that contain all the important lines, notably the line
containing the "Warning:" itself and the oneline log of the dropped
commit.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 't3404-rebase-interactive.sh' the expected output of several tests
is prepared from here documents, which are outside of
'test_expect_success' blocks and have spaces around redirection
operators.
Move these here documents into the corresponding 'test_expect_success'
block and avoid spaces between filename and redition operators.
Furthermore, quote the here docs' delimiter word to prevent parameter
expansions and what not, where applicable.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git.kernel.org uses cgit, not gitweb, these days:
$ w3m -dump 'http://git.kernel.org/?p=git/git.git;a=tree;f=gitweb' | grep -w generated
generated by cgit 1.2-0.3.lf.el7 (git 2.18.0) at 2019-06-22 16:14:38 +0000
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just return the value of the factor or zero for unrecognized strings
instead of using an output reference and a separate return value to
indicate success. This is shorter and simpler.
It basically reverts that function to before c8deb5a146 ("Improve error
messages when int/long cannot be parsed from config", 2007-12-25), while
keeping the better messages, so restore its old name, get_unit_factor(),
as well.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_unit_factor() multiplies the number that is passed to it with the
value of a recognized unit factor (K, M or G for 2^10, 2^20 and 2^30,
respectively). All callers pass in 1 as a number, though, which allows
them to check the actual multiplication for overflow before they are
doing it themselves.
Ignore the passed in number and don't multiply, as this feature of
parse_unit_factor() is not used anymore. Rename the output parameter to
reflect that it's not about the end result anymore, but just about the
unit factor.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_unit_factor() checks if a K, M or G is present after a number and
multiplies it by 2^10, 2^20 or 2^30, respectively. One of its callers
checks if the result is smaller than the number alone to detect
overflows. The other one passes 1 as the number and does multiplication
and overflow check itself in a similar manner.
This works, but is inconsistent, and it would break if we added support
for a bigger unit factor. E.g. 16777217T is 2^64 + 2^40, i.e. too big
for a 64-bit number. Modulo 2^64 we get 2^40 == 1TB, which is bigger
than the raw number 16777217 == 2^24 + 1, so the overflow would go
undetected by that method.
Let both callers pass 1 and handle overflow check and multiplication
themselves. Do the check before the multiplication, using
unsigned_mult_overflows, which is simpler and can deal with larger unit
factors.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a case-insensitive filesystem, such as HFS+ or NTFS, it is possible
that the idea Bash has of the current directory differs in case from
what Git thinks it is. That's totally okay, though, and we should not
expect otherwise.
On Windows, for example, when you call
cd C:\GIT-SDK-64
in a PowerShell and there exists a directory called `C:\git-sdk-64`, the
current directory will be reported in all upper-case. Even in a Bash
that you might call from that PowerShell. Git, however, will have
normalized this via `GetFinalPathByHandle()`, and the expectation in
t0001 that the recorded gitdir will match what `pwd` says will be
violated.
Let's address this by comparing these paths in a case-insensitive
manner when `core.ignoreCase` is `true`.
Reported by Jameson Miller.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The delta island code always prints "Marked %d islands", even if
progress has been suppressed with --no-progress or by sending stderr to
a non-tty.
Let's pass a progress boolean to load_delta_islands(). We already do
the same thing for the progress meter in resolve_tree_islands().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the conversion of 'stash show' to C in dc7bd382b1 ("stash: convert
show to builtin", 2019-02-25), 'git stash show <n>', where n is the
index of a stash got broken, if n is not a file or a valid revision by
itself.
'stash show' accepts any flag 'git diff' accepts for changing the
output format. Internally we use 'setup_revisions()' to parse these
command line flags. Currently we pass the whole argv through to
'setup_revisions()', which includes the stash index.
As the stash index is not a valid revision or a file in the working
tree in most cases however, this 'setup_revisions()' call (and thus
the whole command) ends up failing if we use this form of 'git stash
show'.
Instead of passing the whole argv to 'setup_revisions()', only pass
the flags (and the command name) through, while excluding the stash
reference. The stash reference is parsed (and validated) in
'get_stash_info()' already.
This separate parsing also means that we currently do produce the
correct output if the command succeeds.
Reported-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We started including stdio.h to pick up the declaration of "FILE" in
f26a001226 (Enable wt-status output to a given FILE pointer.,
2007-09-17). But there's no need, since headers can assume that
git-compat-util.h has been included, which covers stdio.
This should just be redundant, and not hurting anything (like pulling in
includes out of order) because C files are supposed to always include
git-compat-util.h first. But it's worth cleaning up to model good
behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason verify-tag.c needs to include signal.h. It's already
in git-compat-util.h, which we properly include as the first header.
And there doesn't seem to be a particular reason for this include; it's
just an artifact from the file creation in 2ae68fcb78 (Make verify-tag a
builtin., 2007-07-27).
Likewise verify-commit.c has the same issue, probably because it was
created using verify-tag as a template in d07b00b7f3 (verify-commit:
scriptable commit signature verification, 2014-06-23).
These includes are probably just redundant, and not hurting anything by
circumventing the order that git-compat-util.h tries to impose, since
we'll always have loaded git-compat-util by the time we get to these. So
this is just a cleanup, and shouldn't fix or break any platforms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
0620b39b3b ("compat: add a mkstemps() compatibility function", 2009-05-31)
included a function based on code from libiberty which would result in
undefined behaviour in platforms where timeval's tv_usec is a 32-bit signed
type as shown by:
wrapper.c:505:31: runtime error: left shift of 594546 by 16 places cannot be represented in type '__darwin_suseconds_t' (aka 'int')
interestingly the version of this code from gcc never had this bug and the
code had a cast that would had prevented the issue (at least in 64-bit
platforms) but was misapplied.
change the cast to uint64_t so it also works in 32-bit platforms.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret-trailers program does not do the usual loading of config
via git_default_config(), and thus does not respect many of the usual
options. In particular, we will not load core.commentChar, even though
the underlying trailer code uses its value.
This can be seen in the accompanying test, where setting
core.commentChar to anything besides "#" results in a failure to treat
the comments correctly.
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert calls of memcpy(3) to use COPY_ARRAY, which shortens and
simplifies the code a bit.
Patch generated by Coccinelle and contrib/coccinelle/array.cocci.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current semantic patch for COPY_ARRAY transforms memcpy(3) calls on
pointers, but Coccinelle distinguishes them from arrays. It already
contains three rules to handle the options for sizeof (i.e. source,
destination and type), and handling arrays as source and destination
would require four times as many rules if we enumerated all cases.
We also don't handle array subscripts, and supporting that would
increase the number of rules by another factor of four. (An isomorphism
telling Coccinelle that "sizeof x[...]" is equivalent to "sizeof *x"
would be nice..)
Support arrays and array subscripts, but keep the number of rules down
by adding normalization steps: First turn array subscripts into
derefences, then determine the types of expressions used with sizeof and
replace them with these types, and then convert the different possible
combinations of arrays and pointers with memcpy(3) to COPY_ARRAY.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
883e248b8a ("fsmonitor: teach git to optionally utilize a file system
monitor to speed up detecting new or changed files.", 2017-09-22) uses
an int in a loop that would wrap if index_state->cache_nr (unsigned)
is bigger than INT_MAX
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This one slipped through the review of a9279c6785 (sequencer: do not
squash 'reword' commits when we hit conflicts, 2018-06-19).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calculating the sum of two array indexes to find the midpoint between
them can overflow, i.e. code like this is unsafe for big arrays:
mid = (first + last) >> 1;
Make sure the intermediate value stays within the boundaries instead,
like this:
mid = first + ((last - first) >> 1);
The loop condition of the binary search makes sure that 'last' is
always greater than 'first', so this is safe as long as 'first' is
not negative. And that can be verified easily using the pre-context
of each change, except for name-hash.c, so add an assertion to that
effect there.
The unsafe calculations were found with:
git grep '(.*+.*) *>> *1'
This is a continuation of 19716b21a4 (cleanup: fix possible overflow
errors in binary search, 2017-10-08).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit fecc6f3a68 ("add -p: adjust offsets of subsequent hunks when one is
skipped", 2018-03-01) fixed adding hunks in the correct place when a
previous hunk has been skipped. However it did not address patches that
are applied in reverse. In that case we need to adjust the pre-image
offset so that when apply reverses the patch the post-image offset is
adjusted correctly. We subtract rather than add the delta as the patch
is reversed (the easiest way to think about it is to consider a hunk of
deletions that is skipped - in that case we want to reduce offset so we
need to subtract).
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `labs()` function operates, as the initial `l` suggests, on `long`
parameters. However, in `config.c` we tried to use it on values of type
`intmax_t`.
This problem was found by GCC v9.x.
To fix it, let's just "unroll" the function (i.e. negate the value if it
is negative).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We introduced helper macros to simplify loading functions dynamically.
Might just as well use them.
This also side-steps a compiler warning when building with GCC v8.x: it
would complain about casting between incompatible function pointers.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The kwset functionality makes use of the obstack code, which expects to
be handed a function that can allocate large chunks of data. It expects
that function to accept a `size` parameter of type `long`.
This upsets GCC 8 on Windows, because `long` does not have the same
bit size as `size_t` there.
Now, the proper thing to do would be to switch to `size_t`. But this
would make us deviate from the "upstream" code even further, making it
hard to synchronize with newer versions, and also it would be quite
involved because that `long` type is so invasive in that code.
Let's punt, and instead provide a super small wrapper around
`xmalloc()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return type of the `GetProcAddress()` function is `FARPROC` which
evaluates to `long long int (*)()`, i.e. it cannot be cast to the
correct function signature by GCC 8.
To work around that, we first cast to `void *` and go on with our merry
lives.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The close_all_packs() method is now responsible for more than just pack-files.
It also closes the commit-graph and the multi-pack-index. Rename the function
to be more descriptive of its larger role. The name also fits because the
input parameter is a raw_object_store.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The close_all_packs() method is used to close all read handles to
pack-files and the multi-pack-index before running 'git gc --auto'.
This is particularly important on the Windows platform, where read
handles block any writes to those files. Replacing one of these
files with a rename() will fail in this situation.
The commit-graph also performs a rename, so is susceptable to this
problem. We are careful to close the commit-graph before writing,
but that doesn't work when a 'git fetch' (or similar) process runs
'git gc --auto' which may write a commit-graph.
Here, close the commit-graph as part of close_all_packs().
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The close_commit_graph() method took a repository struct, but then
only uses the raw_object_store within. Change the function prototype
to make the method more flexible.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method is too complex, so we are
extracting helper functions one by one.
Extract write_commit_graph_file() that takes all of the information
in the context struct and writes the data to a commit-graph file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method is too complex, so we are
extracting helper functions one by one.
Extract copy_oids_to_commits(), which fills the commits list
with the distinct commits from the oids list. During this loop,
it also counts the number of "extra" edges from octopus merges.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method is too complex, so we are
extracting helper functions one by one.
Extract count_distinct_commits(), which sorts the oids list, then
iterates through to find duplicates.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method is too complex, so we are
extracting helper functions one by one.
Extract fill_oids_from_all_packs() that reads all pack-files
for commits and fills the oid list in the context.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method is too complex, so we are
extracting helper functions one by one.
Extract fill_oids_from_commit_hex() that reads the given commit
id list and fille the oid list in the context.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method is too complex, so we are
extracting helper functions one by one.
This extracts fill_oids_from_packs() that reads the given
pack-file list and fills the oid list in the context.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method is too large and complex. To simplify
it, we should extract several helper functions. However, we will risk
repeating a lot of declarations related to progress incidators and
object id or commit lists.
Create a new write_commit_graph_context struct that contains the
core data structures used in this process. Replace the other local
variables with the values inside the context object. Following this
change, we will start to lift code segments wholesale out of the
write_commit_graph() method and into helper functions.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph feature began with a long list of planned
benefits, most of which are now complete. The future work
section has only a few items left.
As for making more algorithms aware of generation numbers,
some are only waiting for generation number v2 to ensure the
performance matches the existing behavior using commit date.
It is unlikely that we will ever send a commit-graph file
as part of the protocol, since we would need to verify the
data, and that is expensive. If we want to start trusting
remote content, then that item can be investigated again.
While there is more work to be done on the feature, having
a section of the docs devoted to a TODO list is wasteful and
hard to keep up-to-date.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() and write_commit_graph_reachable() methods
currently take two boolean parameters: 'append' and 'report_progress'.
As we update these methods, adding more parameters this way becomes
cluttered and hard to maintain.
Collapse these parameters into a 'flags' parameter, and adjust the
callers to provide flags as necessary.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method uses die() to report failure and
exit when confronted with an unexpected condition. This use of
die() in a library function is incorrect and is now replaced by
error() statements and an int return type. Return zero on success
and a negative value on failure.
Now that we use 'goto cleanup' to jump to the terminal condition
on an error, we have new paths that could lead to uninitialized
values. New initializers are added to correct for this.
The builtins 'commit-graph', 'gc', and 'commit' call these methods,
so update them to check the return value. Test that 'git commit-graph
write' returns a proper error code when hitting a failure condition
in write_commit_graph().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git <cmd> --git-completion-helper" could fail if the command checks for
a repo before parse_options(). If the result is cached, later on when
the user moves to a worktree with repo, tab completion will still fail.
Avoid this by detecting errors and not cache the completion output. We
can try again and hopefully succeed next time (e.g. when a repo is
found).
Of course if --git-completion-helper fails permanently because of other
reasons (*), this will slow down completion. But I don't see any better
option to handle that case.
(*) one of those cases is if __gitcomp_builtin is called on a command
that does not support --git-completion-helper. And we do have a
generic call
__git_complete_common "$command"
but this case is protected with __git_support_parseopt_helper so we're
good.
Reported-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching into a partial clone, Git first prefetches missing
REF_DELTA bases from the promisor remote. (This feature was introduced
in [1].) But as can be seen in a recent test coverage report [2], the
case in which a REF_DELTA base is already present is not covered by
tests.
Extend the tests slightly to cover this case.
[1] 8a30a1efd1 ("index-pack: prefetch missing REF_DELTA bases",
2019-05-15).
[2] https://public-inbox.org/git/396091fc-5572-19a5-4f18-61c258590dd5@gmail.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor
Quentin Nerden
Johannes Schindelin
Jonathan Tan
Morian Sonnet
Jakub Wilk
René Scharfe
Jeff King
Thomas Gummerer
Carlo Marcelo Arenas Belón
Phillip Wood
Derrick Stolee
Nguyễn Thái Ngọc Duy