Граф коммитов

16 Коммитов

Автор SHA1 Сообщение Дата
Brad King 80988783c8 submodule: Search for merges only at end of recursive merge
The submodule merge search is not useful during virtual merges because
the results cannot be used automatically.  Furthermore any suggestions
made by the search may apply to commits different than HEAD:sub and
MERGE_HEAD:sub, thus confusing the user.  Skip searching for submodule
merges during a virtual merge such as that between B and C while merging
the heads of:

    B---BC
   / \ /
  A   X
   \ / \
    C---CB

Run the search only when the recursion level is zero (!o->call_depth).
This fixes known breakage tested in t7405-submodule-merge.

Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-13 10:18:16 -07:00
Fredrik Gustafsson d2b17b3220 push: Don't push a repository with unpushed submodules
When working with submodules it is easy to forget to push a
submodule to the server but pushing a super-project that
contains a commit for that submodule. The result is that the
superproject points at a submodule commit that is not available
on the server.

This adds the option --recurse-submodules=check to push. When
using this option git will check that all submodule commits that
are about to be pushed are present on a remote of the submodule.

To be able to use a combined diff, disabling a diff callback has
been removed from combined-diff.c.

Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-20 23:03:52 -07:00
Jens Lehmann 8f0700dd33 fetch/pull: Add the 'on-demand' value to the --recurse-submodules option
Until now the --recurse-submodules option could only be used to either
fetch all populated submodules recursively or to disable recursion
completely. As fetch and pull now by default just fetch those submodules
for which new commits have been fetched in the superproject, a command
line option to enforce that behavior is needed to be able to override
configuration settings.

Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09 13:10:35 -08:00
Jens Lehmann 88a21979c5 fetch/pull: recurse into submodules when necessary
To be able to access all commits of populated submodules referenced by the
superproject it is sufficient to only then let "git fetch" recurse into a
submodule when the new commits fetched in the superproject record new
commits for it. Having these commits present is extremely useful when
using the "--submodule" option to "git diff" (which is what "git gui" and
"gitk" do since 1.6.6), as all submodule commits needed for creating a
descriptive output can be accessed. Also merging submodule commits (added
in 1.7.3) depends on the submodule commits in question being present to
work. Last but not least this enables disconnected operation when using
submodules, as all commits necessary for a successful "git submodule
update -N" will have been fetched automatically. So we choose this mode as
the default for fetch and pull.

Before a new or changed ref from upstream is updated in update_local_ref()
"git rev-list <new-sha1> --not --branches --remotes" is used to determine
all newly fetched commits. These are then walked and diffed against their
parent(s) to see if a submodule has been changed. If that is the case, its
path is stored to be fetched after the superproject fetch is completed.

Using the "--recurse-submodules" or the "--no-recurse-submodules" option
disables the examination of the fetched refs because the result will be
ignored anyway.

There is currently no infrastructure for storing deleted and new
submodules in the .git directory of the superproject. That's why fetch and
pull for now only fetch submodules that are already checked out and are
not renamed.

In t7403 the "--no-recurse-submodules" argument had to be added to "git
pull" to avoid failure because of the moved upstream submodule repo.

Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09 13:10:35 -08:00
Jens Lehmann be254a0ea9 Add the 'fetch.recurseSubmodules' config setting
This new boolean option can be used to override the default for "git
fetch" and "git pull", which is to not recurse into populated submodules
and fetch all new commits there too.

Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-12 15:06:03 -08:00
Jens Lehmann 7dce19d374 fetch/pull: Add the --recurse-submodules option
Until now you had to call "git submodule update" (without -N|--no-fetch
option) or something like "git submodule foreach git fetch" to fetch
new commits in populated submodules from their remote.

This could lead to "(commits not present)" messages in the output of
"git diff --submodule" (which is used by "git gui" and "gitk") after
fetching or pulling new commits in the superproject and is an obstacle for
implementing recursive checkout of submodules. Also "git submodule
update" cannot fetch changes when disconnected, so it was very easy to
forget to fetch the submodule changes before disconnecting only to
discover later that they are needed.

This patch adds the "--recurse-submodules" option to recursively fetch
each populated submodule from the url configured in the .git/config of the
submodule at the end of each "git fetch" or during "git pull" in the
superproject. The submodule paths are taken from the index.

The hidden option "--submodule-prefix" is added to "git fetch" to be able
to print out the full paths of nested submodules.

Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-12 15:06:03 -08:00
Junio C Hamano 2d984464c6 Merge branch 'hv/submodule-find-ff-merge'
* hv/submodule-find-ff-merge:
  Implement automatic fast-forward merge for submodules
  setup_revisions(): Allow walking history in a submodule
  Teach ref iteration module about submodules

Conflicts:
	submodule.c
2010-08-21 23:27:59 -07:00
Jens Lehmann 302ad7a993 Submodules: Use "ignore" settings from .gitmodules too for diff and status
The .gitmodules file is parsed for "submodule.<name>.ignore" entries
before looking for them in .git/config. Thus settings found in .git/config
will override those from .gitmodules, thereby allowing the local developer
to ignore settings given by the remote side while also letting upstream
set defaults for those users who don't have special needs.

Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-09 09:11:44 -07:00
Jens Lehmann aee9c7d654 Submodules: Add the new "ignore" config option for diff and status
The new "ignore" config option controls the default behavior for "git
status" and the diff family. It specifies under what circumstances they
consider submodules as modified and can be set separately for each
submodule.

The command line option "--ignore-submodules=" has been extended to accept
the new parameter "none" for both status and diff.

Users that chose submodules to get rid of long work tree scanning times
might want to set the "dirty" option for those submodules. This brings
back the pre 1.7.0 behavior, where submodule work trees were never
scanned for modifications. By using "--ignore-submodules=none" on the
command line the status and diff commands can be told to do a full scan.

This option can be set to the following values (which have the same name
and meaning as for the "--ignore-submodules" option of status and diff):

"all": All changes to the submodule will be ignored.

"dirty": Only differences of the commit recorded in the superproject and
	the submodules HEAD will be considered modifications, all changes
	to the work tree of the submodule will be ignored. When using this
	value, the submodule will not be scanned for work tree changes at
	all, leading to a performance benefit on large submodules.

"untracked": Only untracked files in the submodules work tree are ignored,
	a changed HEAD and/or modified files in the submodule will mark it
	as modified.

"none" (which is the default): Either untracked or modified files in a
	submodules work tree or a difference between the subdmodules HEAD
	and the commit recorded in the superproject will make it show up
	as changed. This value is added as a new parameter for the
	"--ignore-submodules" option of the diff family and "git status"
	so the user can override the settings in the configuration.

Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-09 09:01:52 -07:00
Heiko Voigt 68d03e4a6e Implement automatic fast-forward merge for submodules
This implements a simple merge strategy for submodule hashes. We check
whether one side of the merge candidates is already contained in the
other and then merge automatically.

If both sides contain changes we search for a merge in the submodule.
In case a single one exists we check that out and suggest it as the
merge resolution. A list of candidates is returned when we find multiple
merges that contain both sides of the changes.

This is useful for a workflow in which the developers can publish topic
branches in submodules and a separate maintainer merges them. In case
the developers always wait until their branch gets merged before tracking
them in the superproject all merges of branches that contain submodule
changes will be resolved automatically. If developers choose to track
their feature branch the maintainer might get a conflict but git will
search the submodule for a merge and suggest it/them as a resolution.

Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-07 09:48:45 -07:00
Jens Lehmann 46a958b3da Add the option "--ignore-submodules" to "git status"
In some use cases it is not desirable that "git status" considers
submodules that only contain untracked content as dirty. This may happen
e.g. when the submodule is not under the developers control and not all
build generated files have been added to .gitignore by the upstream
developers. Using the "untracked" parameter for the "--ignore-submodules"
option disables checking for untracked content and lets git diff report
them as changed only when they have new commits or modified content.

Sometimes it is not wanted to have submodules show up as changed when they
just contain changes to their work tree (this was the behavior before
1.7.0). An example for that are scripts which just want to check for
submodule commits while ignoring any changes to the work tree. Also users
having large submodules known not to change might want to use this option,
as the - sometimes substantial - time it takes to scan the submodule work
tree(s) is saved when using the "dirty" parameter.

And if you want to ignore any changes to submodules, you can now do that
by using this option without parameters or with "all" (when the config
option status.submodulesummary is set, using "all" will also suppress the
output of the submodule summary).

A new function handle_ignore_submodules_arg() is introduced to parse this
option new to "git status" in a single location, as "git diff" already
knew it.

Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-25 11:30:25 -07:00
Jens Lehmann 3bfc450476 git status: ignoring untracked files must apply to submodules too
Since 1.7.0 submodules are considered dirty when they contain untracked
files. But when git status is called with the "-uno" option, the user
asked to ignore untracked files, so they must be ignored in submodules
too. To achieve this, the new flag DIFF_OPT_IGNORE_UNTRACKED_IN_SUBMODULES
is introduced.

Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-13 21:56:35 -08:00
Jens Lehmann c7e1a73641 git diff --submodule: Show detailed dirty status of submodules
When encountering a dirty submodule while doing "git diff --submodule"
print an extra line for new untracked content and another for modified
but already tracked content. And if the HEAD of the submodule is equal
to the ref diffed against in the superproject, drop the output which
would just show the same SHA1s and no commit message headlines.

To achieve that, the dirty_submodule bitfield is expanded to two bits.
The output of "git status" inside the submodule is parsed to set the
according bits.

Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-04 22:16:33 -08:00
Jens Lehmann 721ceec1ad Teach diff --submodule that modified submodule directory is dirty
Since commit 8e08b4 git diff does append "-dirty" to the work tree side
if the working directory of a submodule contains new or modified files.
Lets do the same when the --submodule option is used.

Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-24 21:04:31 -08:00
Jens Lehmann ee6fc514f2 Show submodules as modified when they contain a dirty work tree
Until now a submodule only then showed up as modified in the supermodule
when the last commit in the submodule differed from the one in the index
or the diffed against commit of the superproject. A dirty work tree
containing new untracked or modified files in a submodule was
undetectable when looking at it from the superproject.

Now git status and git diff (against the work tree) in the superproject
will also display submodules as modified when they contain untracked or
modified files, even if the compared ref matches the HEAD of the
submodule.

Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-16 16:40:50 -08:00
Johannes Schindelin 752c0c2492 Add the --submodule option to the diff option family
When you use the option --submodule=log you can see the submodule
summaries inlined in the diff, instead of not-quite-helpful SHA-1 pairs.

The format imitates what "git submodule summary" shows.

To do that, <path>/.git/objects/ is added to the alternate object
databases (if that directory exists).

This option was requested by Jens Lehmann at the GitTogether in Berlin.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-19 22:31:00 -07:00