"git fsck" has been taught to report mismatch between expected and
actual types of an object better.
* ab/fsck-unexpected-type:
fsck: report invalid object type-path combinations
fsck: don't hard die on invalid object types
object-file.c: stop dying in parse_loose_header()
object-file.c: return ULHR_TOO_LONG on "header too long"
object-file.c: use "enum" return type for unpack_loose_header()
object-file.c: simplify unpack_loose_short_header()
object-file.c: make parse_loose_header_extended() public
object-file.c: return -1, not "status" from unpack_loose_header()
object-file.c: don't set "typep" when returning non-zero
cat-file tests: test for current --allow-unknown-type behavior
cat-file tests: add corrupt loose object test
cat-file tests: test for missing/bogus object with -t, -s and -p
cat-file tests: move bogus_* variable declarations earlier
fsck tests: test for garbage appended to a loose object
fsck tests: test current hash/type mismatch behavior
fsck tests: refactor one test to use a sub-repo
fsck tests: add test for fsck-ing an unknown type
Improve the error that's emitted in cases where we find a loose object
we parse, but which isn't at the location we expect it to be.
Before this change we'd prefix the error with a not-a-OID derived from
the path at which the object was found, due to an emergent behavior in
how we'd end up with an "OID" in these codepaths.
Now we'll instead say what object we hashed, and what path it was
found at. Before this patch series e.g.:
$ git hash-object --stdin -w -t blob </dev/null
e69de29bb2
$ mv objects/e6/ objects/e7
Would emit ("[...]" used to abbreviate the OIDs):
git fsck
error: hash mismatch for ./objects/e7/9d[...] (expected e79d[...])
error: e79d[...]: object corrupt or missing: ./objects/e7/9d[...]
Now we'll instead emit:
error: e69d[...]: hash-path mismatch, found at: ./objects/e7/9d[...]
Furthermore, we'll do the right thing when the object type and its
location are bad. I.e. this case:
$ git hash-object --stdin -w -t garbage --literally </dev/null
8315a83d2acc4c174aed59430f9a9c4ed926440f
$ mv objects/83 objects/84
As noted in an earlier commits we'd simply die early in those cases,
until preceding commits fixed the hard die on invalid object type:
$ git fsck
fatal: invalid object type
Now we'll instead emit sensible error messages:
$ git fsck
error: 8315[...]: hash-path mismatch, found at: ./objects/84/15[...]
error: 8315[...]: object is of unknown type 'garbage': ./objects/84/15[...]
In both fsck.c and object-file.c we're using null_oid as a sentinel
value for checking whether we got far enough to be certain that the
issue was indeed this OID mismatch.
We need to add the "object corrupt or missing" special-case to deal
with cases where read_loose_object() will return an error before
completing check_object_signature(), e.g. if we have an error in
unpack_loose_rest() because we find garbage after the valid gzip
content:
$ git hash-object --stdin -w -t blob </dev/null
e69de29bb2
$ chmod 755 objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
$ echo garbage >>objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
$ git fsck
error: garbage at end of loose object 'e69d[...]'
error: unable to unpack contents of ./objects/e6/9d[...]
error: e69d[...]: object corrupt or missing: ./objects/e6/9d[...]
There is currently some weird messaging in the edge case when the two
are combined, i.e. because we're not explicitly passing along an error
state about this specific scenario from check_stream_oid() via
read_loose_object() we'll end up printing the null OID if an object is
of an unknown type *and* it can't be unpacked by zlib, e.g.:
$ git hash-object --stdin -w -t garbage --literally </dev/null
8315a83d2acc4c174aed59430f9a9c4ed926440f
$ chmod 755 objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
$ echo garbage >>objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
$ /usr/bin/git fsck
fatal: invalid object type
$ ~/g/git/git fsck
error: garbage at end of loose object '8315a83d2acc4c174aed59430f9a9c4ed926440f'
error: unable to unpack contents of ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
error: 8315a83d2acc4c174aed59430f9a9c4ed926440f: object corrupt or missing: ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
error: 0000000000000000000000000000000000000000: object is of unknown type 'garbage': ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
[...]
I think it's OK to leave that for future improvements, which would
involve enum-ifying more error state as we've done with "enum
unpack_loose_header_result" in preceding commits. In these
increasingly more obscure cases the worst that can happen is that
we'll get slightly nonsensical or inapplicable error messages.
There's other such potential edge cases, all of which might produce
some confusing messaging, but still be handled correctly as far as
passing along errors goes. E.g. if check_object_signature() returns
and oideq(real_oid, null_oid()) is true, which could happen if it
returns -1 due to the read_istream() call having failed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize "git log" for cases where we wasted cycles to load ref
decoration data that may not be needed.
* jk/log-decorate-optim:
load_ref_decorations(): fix decoration with tags
add_ref_decoration(): rename s/type/deco_type/
load_ref_decorations(): avoid parsing non-tag objects
object.h: add lookup_object_by_type() function
object.h: expand docstring for lookup_unknown_object()
log: avoid loading decorations for userformats that don't need it
pretty.h: update and expand docstring for userformat_find_requirements()
With many alternates, the duplicate check in alt_odb_usable()
wastes many cycles doing repeated fspathcmp() on every existing
alternate. Use a khash to speed up lookups by odb->path.
Since the kh_put_* API uses the supplied key without
duplicating it, we also take advantage of it to replace both
xstrdup() and strbuf_release() in link_alt_odb_entry() with
strbuf_detach() to avoid the allocation and copy.
In a test repository with 50K alternates and each of those 50K
alternates having one alternate each (for a total of 100K total
alternates); this speeds up lookup of a non-existent blob from
over 16 minutes to roughly 2.7 seconds on my busy workstation.
Note: all underlying git object directories were small and
unpacked with only loose objects and no packs. Having to load
packs increases times significantly.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases it's useful for efficiency reasons to get the type of an
object before deciding whether to parse it, but we still want an object
struct. E.g., in reachable.c, bitmaps give us the type, but we just want
to mark flags on each object. Likewise, we may loop over every object
and only parse tags in order to peel them; checking the type first lets
us avoid parsing the non-tags.
But our lookup_blob(), etc, functions make getting an object struct
annoying: we have to call the right function for every type. And we
cannot just use the generic lookup_object(), because it only returns an
already-seen object; it won't allocate a new object struct.
Let's provide a function that dispatches to the correct lookup_*
function based on a run-time type. In fact, reachable.c already has such
a helper, so we'll just make that public.
I did change the return type from "void *" to "struct object *". While
the former is a clever way to avoid casting inside the function, it's
less safe and less informative to people reading the function
declaration.
The next commit will add a new caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the other lookup_foo() functions take a repository argument, but
lookup_unknown_object() was never converted, and it uses the_repository
internally. Let's fix that.
We could leave a wrapper that uses the_repository, but there aren't that
many calls, so we'll just convert them all. I looked briefly at each
site to see if we had a repository struct (besides the_repository) we
could pass, but none of them do (so this conversion to pass
the_repository is a pure noop in each case, though it does take us one
step closer to eventually getting rid of the_repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git rev-list` will list one commit for the following command:
$ git rev-list 'main^!'
<tip-commit-of-main-branch>
But providing the same rev-list args to `git bundle`, fail to create
a bundle file.
$ git bundle create - 'main^!'
# v2 git bundle
-<OID> <one-line-message>
fatal: Refusing to create empty bundle.
This is because when removing duplicate objects in function
`object_array_remove_duplicates()`, one unique pending object which has
the same name is deleted by mistake. The revision arg 'main^!' in the
above example is parsed by `handle_revision_arg()`, and at lease two
different objects will be appended to `revs.pending`, one points to the
parent commit of the "main" branch, and the other points to the tip
commit of the "main" branch. These two objects have the same name
"main". Only one object is left with the name "main" after calling the
function `object_array_remove_duplicates()`.
And what's worse, when adding boundary commits into pending list, we use
one-line commit message as names, and the arbitory names may surprise
git-bundle.
Only comparing objects themselves (".item") is also not good enough,
because user may want to create a bundle with two identical objects but
with different reference names, such as: "HEAD" and "refs/heads/main".
Add new function `contains_object()` which compare both the address and
the name of the object.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A specialization of hashmap that uses a string as key has been
introduced. Hopefully it will see wider use over time.
* en/strmap:
shortlog: use strset from strmap.h
Use new HASHMAP_INIT macro to simplify hashmap initialization
strmap: take advantage of FLEXPTR_ALLOC_STR when relevant
strmap: enable allocations to come from a mem_pool
strmap: add a strset sub-type
strmap: split create_entry() out of strmap_put()
strmap: add functions facilitating use as a string->int map
strmap: enable faster clearing and reusing of strmaps
strmap: add more utility functions
strmap: new utility functions
hashmap: provide deallocation function names
hashmap: introduce a new hashmap_partial_clear()
hashmap: allow re-use after hashmap_free()
hashmap: adjust spacing to fix argument alignment
hashmap: add usage documentation explaining hashmap_free[_entries]()
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow callers to specify the repository to use. Rename the function to
repo_clear_commit_marks to document its new scope. No functional change
intended.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14ba97f8 (alloc: allow arbitrary repositories for alloc functions,
2018-05-15) introduced parsed_object_pool->commit_count to keep count of
commits per repository and was used to assign commit->index.
However, commit-slab code requires commit->index values to be unique
and a global count would be correct, rather than a per-repo count.
Let's introduce a static counter variable, `parsed_commits_count` to
keep track of parsed commits so far.
As commit_count has no use anymore, let's also drop it from the struct.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The object reachability bitmap machinery and the partial cloning
machinery were not prepared to work well together, because some
object-filtering criteria that partial clones use inherently rely
on object traversal, but the bitmap machinery is an optimization
to bypass that object traversal. There however are some cases
where they can work together, and they were taught about them.
* jk/object-filter-with-bitmap:
rev-list --count: comment on the use of count_right++
pack-objects: support filters with bitmaps
pack-bitmap: implement BLOB_LIMIT filtering
pack-bitmap: implement BLOB_NONE filtering
bitmap: add bitmap_unset() function
rev-list: use bitmap filters for traversal
pack-bitmap: basic noop bitmap filter infrastructure
rev-list: allow commit-only bitmap traversals
t5310: factor out bitmap traversal comparison
rev-list: allow bitmaps when counting objects
rev-list: make --count work with --objects
rev-list: factor out bitmap-optimized routines
pack-bitmap: refuse to do a bitmap traversal with pathspecs
rev-list: fallback to non-bitmap traversal when filtering
pack-bitmap: fix leak of haves/wants object lists
pack-bitmap: factor out type iterator initialization
Some codepaths were given a repository instance as a parameter to
work in the repository, but passed the_repository instance to its
callees, which has been cleaned up (somewhat).
* mt/use-passed-repo-more-in-funcs:
sha1-file: allow check_object_signature() to handle any repo
sha1-file: pass git_hash_algo to hash_object_file()
sha1-file: pass git_hash_algo to write_object_file_prepare()
streaming: allow open_istream() to handle any repo
pack-check: use given repo's hash_algo at verify_packfile()
cache-tree: use given repo's hash_algo at verify_one()
diff: make diff_populate_filespec() honor its repo argument
When we do a bitmap-aware revision traversal, we create an object_list
for each of the "haves" and "wants" tips. After creating the result
bitmaps these are no longer needed or used, but we never free the list
memory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some callers of check_object_signature() can work on arbitrary
repositories, but the repo does not get passed to this function.
Instead, the_repository is always used internally. To fix possible
inconsistencies, allow the function to receive a struct repository and
make those callers pass on the repo being handled.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
replace-object functions are very close to being thread-safe: the only
current racy section is the lazy initialization at
prepare_replace_object(). The following patches will protect some object
reading operations to be called threaded, but before that, replace
functions must be protected. To do so, add a mutex to struct
raw_object_store and acquire it before lazy initializing the
replace_map. This won't cause any noticeable performance drop as the
mutex will no longer be used after the replace_map is initialized.
Later, when the replace functions are called in parallel, thread
debuggers might point our use of the added replace_map_initialized flag
as a data race. However, as this boolean variable is initialized as
false and it's only updated once, there's no real harm. It's perfectly
fine if the value is updated right after a thread read it in
replace-map.h:lookup_replace_object() (there'll only be a performance
penalty for the affected threads at that moment). We could cease the
debugger warning protecting the variable reading at the said function.
However, this would negatively affect performance for all threads
calling it, at any time, so it's not really worthy since the warning
doesn't represent a real problem. Instead, to make sure we don't get
false positives (at ThreadSanitizer, at least) an entry for the
respective function is added to .tsan-suppressions.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When loading packfiles on start-up, we traverse the internal packfile
list once per file to avoid reloading packfiles that have already
been loaded. This check runs in quadratic time, so for poorly
maintained repos with a large number of packfiles, it can be pretty
slow.
Add a hashmap containing the packfile names as we load them so that
the average runtime cost of checking for already-loaded packs becomes
constant.
Add a perf test to p5303 to show speed-up.
The existing p5303 test runtimes are dominated by other factors and do
not show an appreciable speed-up. The new test in p5303 clearly exposes
a speed-up in bad cases. In this test we create 10,000 packfiles and
measure the start-up time of git rev-parse, which does little else
besides load in the packs.
Here are the numbers for the new p5303 test:
Test HEAD^ HEAD
---------------------------------------------------------------------
5303.12: load 10,000 packs 1.03(0.92+0.10) 0.12(0.02+0.09) -88.3%
Signed-off-by: Colin Stolley <cstolley@runbox.com>
Helped-by: Jeff King <peff@peff.net>
[jc: squashed the change to call hashmap in install_packed_git() by peff]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Found with "git grep '^#include ' '*.c' | sort | uniq -d".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to remove hardcoded SHA-1 hash from many places.
* jk/oidhash:
hashmap: convert sha1hash() to oidhash()
hash.h: move object_id definition from cache.h
khash: rename oid helper functions
khash: drop sha1-specific map types
pack-bitmap: convert khash_sha1 maps into kh_oid_map
delta-islands: convert island_marks khash to use oids
khash: rename kh_oid_t to kh_oid_set
khash: drop broken oid_map typedef
object: convert create_object() to use object_id
object: convert internal hash_obj() to object_id
object: convert lookup_object() to use object_id
object: convert lookup_unknown_object() to use object_id
pack-objects: convert locate_object_entry_hash() to object_id
pack-objects: convert packlist_find() to use object_id
pack-bitmap-write: convert some helpers to use object_id
upload-pack: rename a "sha1" variable to "oid"
describe: fix accidental oid/hash type-punning
There are no callers left of sha1hash() that do not simply pass the
"hash" member of a "struct object_id". Let's get rid of the outdated
sha1-specific function and provide one that operates on the whole struct
(even though the technique, taking the first few bytes of the hash, will
remain the same).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left of create_object() that aren't just passing us
the "hash" member of a "struct object_id". Let's take the whole struct,
which gets us closer to removing all raw sha1 variables.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that lookup_object() has an object_id, we can consistently pass that
around instead of a raw sha1. We still convert to a hash to pass to
sha1hash(), but the goal is for that to go away shortly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left of lookup_object() that aren't just passing us
the "hash" member of a "struct object_id". Let's take the whole struct,
which gets us closer to removing all raw sha1 variables. It also
matches the existing conversions of lookup_blob(), etc.
The conversions of callers were done by hand, but they're all mechanical
one-liners.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left of lookup_unknown_object() that aren't just
passing us the "hash" member of a "struct object_id". Let's take the
whole struct, which gets us closer to removing all raw sha1 variables.
It also matches the existing conversions of lookup_blob(), etc.
The conversions of callers were done by hand, but they're all mechanical
one-liners.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The close_all_packs() method is now responsible for more than just pack-files.
It also closes the commit-graph and the multi-pack-index. Rename the function
to be more descriptive of its larger role. The name also fits because the
input parameter is a raw_object_store.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In eee4502baa ("shallow: migrate shallow information into the object
parser", 2018-05-17), we added a stat_validity pointer into the
parsed_object_pool struct, but did not add code to free this in
parsed_object_pool_clear(). This leak was found by fuzz-commit-graph.
Clear the struct and then free it in parsed_object_pool_clear() to
prevent the leak.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph facility did not work when in-core objects that
are promoted from unknown type to commit (e.g. a commit that is
accessed via a tag that refers to it) were involved, which has been
corrected.
* sg/object-as-type-commit-graph-fix:
object_as_type: initialize commit-graph-related fields of 'struct commit'
The in-core repository instances are passed through more codepaths.
* sb/more-repo-in-api: (23 commits)
t/helper/test-repository: celebrate independence from the_repository
path.h: make REPO_GIT_PATH_FUNC repository agnostic
commit: prepare free_commit_buffer and release_commit_memory for any repo
commit-graph: convert remaining functions to handle any repo
submodule: don't add submodule as odb for push
submodule: use submodule repos for object lookup
pretty: prepare format_commit_message to handle arbitrary repositories
commit: prepare logmsg_reencode to handle arbitrary repositories
commit: prepare repo_unuse_commit_buffer to handle any repo
commit: prepare get_commit_buffer to handle any repo
commit-reach: prepare in_merge_bases[_many] to handle any repo
commit-reach: prepare get_merge_bases to handle any repo
commit-reach.c: allow get_merge_bases_many_0 to handle any repo
commit-reach.c: allow remove_redundant to handle any repo
commit-reach.c: allow merge_bases_many to handle any repo
commit-reach.c: allow paint_down_to_common to handle any repo
commit: allow parse_commit* to handle any repo
object: parse_object to honor its repository argument
object-store: prepare has_{sha1, object}_file to handle any repo
object-store: prepare read_object_file to deal with any repo
...
When the commit graph and generation numbers were introduced in
commits 177722b344 (commit: integrate commit graph with commit
parsing, 2018-04-10) and 83073cc994 (commit: add generation number to
struct commit, 2018-04-25), they tried to make sure that the
corresponding 'graph_pos' and 'generation' fields of 'struct commit'
are initialized conservatively, as if the commit were not included in
the commit-graph file.
Alas, initializing those fields only in alloc_commit_node() missed the
case when an object that happens to be a commit is first looked up via
lookup_unknown_object(), and is then later converted to a 'struct
commit' via the object_as_type() helper function (either calling it
directly, or as part of a subsequent lookup_commit() call).
Consequently, both of those fields incorrectly remain set to zero,
which means e.g. that the commit is present in and is the first entry
of the commit-graph file. This will result in wrong timestamp, parent
and root tree hashes, if such a 'struct commit' instance is later
filled from the commit-graph.
Extract the initialization of 'struct commit's fields from
alloc_commit_node() into a helper function, and call it from
object_as_type() as well, to make sure that it properly initializes
the two commit-graph-related fields, too. With this helper function
it is hopefully less likely that any new fields added to 'struct
commit' in the future would remain uninitialized.
With this change alloc_commit_index() won't have any remaining callers
outside of 'alloc.c', so mark it as static.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To future-proof ourselves against a change in the hash, let's use the
more generic "hash mismatch" to refer to integrity problems. Note that
we do advertise this exact string in git-fsck(1). However, the message
itself is marked for translation, meaning we do not expect it to be
machine-readable.
While we're touching that documentation, let's also update it for
grammar and clarity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and use a function for emptying the loose object cache, so callers
don't have to know any of its implementation details.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the object pool to free_commit_buffer and release_commit_memory,
such that we can eliminate access to 'the_repository'.
Also remove the TODO in release_commit_memory, as commit->util was
removed in 9d2c97016f (commit.h: delete 'util' field in struct commit,
2018-05-19)
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8e4b0b6047 (object.c: allow parse_object to handle
arbitrary repositories, 2018-06-28), we forgot to pass the
repository down to the read_object_file.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our handling of alternate object directories is needlessly different
from the main object directory. As a result, many places in the code
basically look like this:
do_something(r->objects->objdir);
for (odb = r->objects->alt_odb_list; odb; odb = odb->next)
do_something(odb->path);
That gets annoying when do_something() is non-trivial, and we've
resorted to gross hacks like creating fake alternates (see
find_short_object_filename()).
Instead, let's give each raw_object_store a unified list of
object_directory structs. The first will be the main store, and
everything after is an alternate. Very few callers even care about the
distinction, and can just loop over the whole list (and those who care
can just treat the first element differently).
A few observations:
- we don't need r->objects->objectdir anymore, and can just
mechanically convert that to r->objects->odb->path
- object_directory's path field needs to become a real pointer rather
than a FLEX_ARRAY, in order to fill it with expand_base_dir()
- we'll call prepare_alt_odb() earlier in many functions (i.e.,
outside of the loop). This may result in us calling it even when our
function would be satisfied looking only at the main odb.
But this doesn't matter in practice. It's not a very expensive
operation in the first place, and in the majority of cases it will
be a noop. We call it already (and cache its results) in
prepare_packed_git(), and we'll generally check packs before loose
objects. So essentially every program is going to call it
immediately once per program.
Arguably we should just prepare_alt_odb() immediately upon setting
up the repository's object directory, which would save us sprinkling
calls throughout the code base (and forgetting to do so has been a
source of subtle bugs in the past). But I've stopped short of that
here, since there are already a lot of other moving parts in this
patch.
- Most call sites just get shorter. The check_and_freshen() functions
are an exception, because they have entry points to handle local and
nonlocal directories separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we generate loose file paths for the main object directory, the
caller provides a buffer to loose_object_path (formerly sha1_file_name).
The callers generally keep their own static buffer to avoid excessive
reallocations.
But for alternate directories, each struct carries its own scratch
buffer. This is needlessly different; let's unify them.
We could go either direction here, but this patch moves the alternates
struct over to the main directory style (rather than vice-versa).
Technically the alternates style is more efficient, as it avoids
rewriting the object directory name on each call. But this is unlikely
to matter in practice, as we avoid reallocations either way (and nobody
has ever noticed or complained that the main object directory is copying
a few extra bytes before making a much more expensive system call).
And this has the advantage that the reusable buffers are tied to
particular calls, which makes the invalidation rules simpler (for
example, the return value from stat_sha1_file() used to be invalidated
by basically any other object call, but now it is affected only by other
calls to stat_sha1_file()).
We do steal the trick from alt_sha1_path() of returning a pointer to the
filled buffer, which makes a few conversions more convenient.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for unifying the handling of alt odb's and the normal
repo object directory, let's use a more neutral name. This patch is
purely mechanical, swapping the type name, and converting any variables
named "alt" to "odb". There should be no functional change, but it will
reduce the noise in subsequent diffs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the partner patch to the previous one, but covering
the "hash" variants instead of "oid". Note that our
coccinelle rule is slightly more complex to avoid triggering
the call in hasheq().
I didn't bother to add a new rule to convert:
- hasheq(E1->hash, E2->hash)
+ oideq(E1, E2)
Since these are new functions, there won't be any such
existing callers. And since most of the code is already
using oideq, we're not likely to introduce new ones.
We might still see "!hashcmp(E1->hash, E2->hash)" from topics
in flight. But because our new rule comes after the existing
ones, that should first get converted to "!oidcmp(E1, E2)"
and then to "oideq(E1, E2)".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
Instead of storing commit graphs in static variables, store them in
struct object_store. There are no changes to the signatures of existing
functions - they all still only support the_repository, and support for
other instances of struct repository will be added in a subsequent
commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_tag_buffer
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_tag
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of get_cached_commit_buffer to
be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Ævar Arnfjörð Bjarmason
Eric Wong
Jeff King
René Scharfe
Jiang Xin
Elijah Newren
Abhishek Kumar
Matheus Tavares
Colin Stolley
Derrick Stolee
Josh Steadmon
SZEDER Gábor
Stefan Beller
Nguyễn Thái Ngọc Duy
Jonathan Tan