Граф коммитов

21 Коммитов

Автор SHA1 Сообщение Дата
Junio C Hamano ff72af00f8 Support a merge with conflicting gitlink change
merge-recursive did not support merging trees that have conflicting
changes in submodules they contain, and died.  Support it exactly the
same way as how it handles conflicting symbolic link changes --- mark it
as a conflict, take the tentative result from the current side, and
letting the caller resolve the conflict, without dying in merge_file()
function.

Also reword the error message issued when merge_file() has to die
because it sees a tree entry of type it does not support yet.

[jc: fixed up initial draft by Finn Arne Gangstad]

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-11 00:40:56 -08:00
Junio C Hamano 561b0fbb4a Fix merge-one-file for our-side-added/our-side-removed cases
When commit ed93b449 changed the script so that it does not
touch untracked working tree file, we forgot that we still
needed to resolve the index entry (otherwise they are left
unmerged).

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-08 18:24:19 -07:00
Junio C Hamano 5be60078c9 Rewrite "git-frotz" to "git frotz"
This uses the remove-dashes target to replace "git-frotz" to "git frotz".

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02 22:52:14 -07:00
Junio C Hamano a6080a0a44 War on whitespace
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time.  There are a few files that need
to have trailing whitespaces (most notably, test vectors).  The results
still passes the test, and build result in Documentation/ area is unchanged.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 00:04:01 -07:00
Johannes Schindelin caba139d43 Use git-merge-file in git-merge-one-file, too
Would you believe? I edited git-merge-one-file (note the missing ".sh"!)
when I submitted the patch which became commit e2b7008752...

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-21 20:33:06 -08:00
Junio C Hamano ed93b449c5 merge: loosen overcautious "working file will be lost" check.
The three-way merge complained unconditionally when a path that
does not exist in the index is involved in a merge when it
existed in the working tree.  If we are merging an old version
that had that path tracked, but the path is not tracked anymore,
and if we are merging that old version in, the result will be
that the path is not tracked.  In that case we should not
complain.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-27 17:16:39 -07:00
Pavel Roskin 82e5a82fd7 Fix more typos, primarily in the code
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-10 00:36:44 -07:00
Mark Wooding f327dbced2 Shell utilities: Guard against expr' magic tokens.
Some words, e.g., `match', are special to expr(1), and cause strange
parsing effects.  Track down all uses of expr and mangle the arguments
so that this isn't a problem.

Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-13 16:45:48 -07:00
Alex Riesen 31f883d1b8 trivial: remove the dots at the end of file names from merge-one-file
to make the output more friendly to mouse copy-paste.

Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-05 17:23:41 -08:00
Junio C Hamano b539c5e8fb git-merge-one: new merge world order.
This does two things:

 - Use new --stage=2 option to create the working tree file with
   leading paths and correct permission bits using
   checkout-index, as before.

 - Make sure we do not confuse "merge" program when the file
   being merged has an unfortunate name, '-L'.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-07 00:50:33 -08:00
Junio C Hamano be61db922a git-merge-one-file: resurrect leading path creation.
Since we do not use git-update-index followed by
git-checkout-index -u to create the half-merged file on
conflicting case anymore, we need to make sure the leading
directories are created here.

Maybe a better solution would be to allow update-index to add to
higher stage, and checkout-index to extract from such, but that
is a change slightly bigger than I would like to have so close
to 1.0, so this should do for now.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-06 00:07:58 -08:00
Junio C Hamano 54dd99a127 merge-one-file: make sure we do not mismerge symbolic links.
We ran "merge" command on O->A, O->B, A!=B case without
verifying the path involved is not a symlink.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-02 01:08:14 -08:00
Junio C Hamano 1c2c10b6e6 merge-one-file: make sure we create the merged file.
The "update-index followed by checkout-index" chain served two
purposes -- to collapse the index to "our" version, and make
sure that file exists in the working tree.  In the recent update
to leave the index unmerged on conflicting path, we wanted to
stop doing the former, but we still need to do the latter (we
allow merging to work in an un-checked-out working tree).

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-02 01:08:14 -08:00
Junio C Hamano ce3ca27545 git-merge-one-file: do not worry about 'rmdir -p' not removing directory.
9ae2172aed used "rmdir -p"
carelessly, causing the more important "git-update-index
--remove" to be skipped.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-01 17:02:04 -08:00
Linus Torvalds 354b9b59b0 merge-one-file: leave unmerged index entries upon automerge failure.
When automerge fails, we used to collapse the path to stage0
from "our" branch, to help "diff-files" users to view the
half-merged state against the current HEAD.  Now diff-files has
been taught how to compare with unmerged stage2,leaving them
unmerged is a better thing to do, especially this prevents the
unresolved conflicts to be committed by mistake.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-30 00:14:19 -08:00
Junio C Hamano 9ae2172aed merge-one-file: use rmdir -p
The flag is universally available, even on VMS; use it.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-20 10:40:31 -08:00
Junio C Hamano 397c76697f merge-one-file: remove empty directories
When the last file in a directory is removed as the result of a
merge, try to rmdir the now-empty directory.

[jc: We probably could use "rmdir -p", but for now we do that by
hand for portability.]

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 19:50:44 -08:00
Junio C Hamano fd66dbf529 merge-one-file: use empty- or common-base condintionally in two-stage merge.
If two sides added the same path completely different thing, it is
easier to see the merge pivoting on /dev/null.  So check the size of
the common section we have found, and empty it if it is too small.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-11 21:18:18 -08:00
Junio C Hamano cb93c19365 merge-one-file: use common as base, instead of emptiness.
Unlike the previous round that merged the path added differently
in each branches using emptiness as the base, compute a common
version and use it as input to 'merge' program.

This would show the resulting (still conflicting) file left in
the working tree as:

	common file contents...
	<<<<<< FILENAME
	version from our branch...
	======
	version from their branch...
	>>>>>> .merge_file_XXXXXX
	more common file contents...

when both sides added similar contents.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-11 21:18:17 -08:00
Junio C Hamano f7d24bbefb merge with /dev/null as base, instead of punting O==empty case
Instead of leaving the path unmerged in a case where each side
adds different version of the same path, attempt to merge it
with empty base and leave "our" version in the index file, just
like we do for the case in conflicting merge.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-11 21:18:17 -08:00
Junio C Hamano 215a7ad1ef Big tool rename.
As promised, this is the "big tool rename" patch.  The primary differences
since 0.99.6 are:

  (1) git-*-script are no more.  The commands installed do not
      have any such suffix so users do not have to remember if
      something is implemented as a shell script or not.

  (2) Many command names with 'cache' in them are renamed with
      'index' if that is what they mean.

There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support  is expected to be removed in the near
future.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-07 17:45:20 -07:00