"git p4" updates.
* ld/git-p4-updates:
git-p4: auto-size the block
git-p4: narrow the scope of exceptions caught when parsing an int
git-p4: raise exceptions from p4CmdList based on error from p4 server
git-p4: better error reporting when p4 fails
git-p4: add option to disable syncing of p4/master with p4
git-p4: disable-rebase: allow setting this via configuration
git-p4: add options --commit and --disable-rebase
git-p4 originally would fetch changes in one query. On large repos this
could fail because of the limits that Perforce imposes on the number of
items returned and the number of queries in the database.
To fix this, git-p4 learned to query changes in blocks of 512 changes,
However, this can be very slow - if you have a few million changes,
with each chunk taking about a second, it can be an hour or so.
Although it's possible to tune this value manually with the
"--changes-block-size" option, it's far from obvious to ordinary users
that this is what needs doing.
This change alters the block size dynamically by looking for the
specific error messages returned from the Perforce server, and reducing
the block size if the error is seen, either to the limit reported by the
server, or to half the current block size.
That means we can start out with a very large block size, and then let
it automatically drop down to a value that works without error, while
still failing correctly if some other error occurs.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code traps all exceptions around some code which parses an
integer, and then talks to Perforce.
That can result in errors from Perforce being ignored. Change the code
to only catch the integer conversion exceptions.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change lays some groundwork for better handling of rowcount errors
from the server, where it fails to send us results because we requested
too many.
It adds an option to p4CmdList() to return errors as a Python exception.
The exceptions are derived from P4Exception (something went wrong),
P4ServerException (the server sent us an error code) and
P4RequestSizeException (we requested too many rows/results from the
server database).
This makes the code that handles the errors a bit easier.
The default behavior is unchanged; the new code is enabled with a flag.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when p4 fails to run, git-p4 just crashes with an obscure
error message.
For example, if the P4 ticket has expired, you get:
Error: Cannot locate perforce checkout of <path> in client view
This change checks whether git-p4 can talk to the Perforce server when
the first P4 operation is attempted, and tries to print a meaningful
error message if it fails.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an option to the git-p4 submit command to disable syncing
with Perforce.
This is useful for the case where a git-p4 mirror has been setup
on a server somewhere, running from (e.g.) cron, and developers
then clone from this. Having the local cloned copy also sync
from Perforce just isn't useful.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This just lets you set the --disable-rebase option with the
git configuration options git-p4.disableRebase. If you're
using this option, you probably want to set it all the time
for a given repo.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a daily work with multiple local git branches, the usual way to
submit only a specified commit was to cherry-pick the commit on
master then run git-p4 submit. It can be very annoying to switch
between local branches and master, only to submit one commit. The
proposed new way is to select directly the commit you want to
submit.
Add option --commit to command 'git-p4 submit' in order to submit
only specified commit(s) in p4.
On a daily work developping software with big compilation time, one
may not want to rebase on his local git tree, in order to avoid long
recompilation.
Add option --disable-rebase to command 'git-p4 submit' in order to
disable rebase after submission.
Thanks-to: Cedric Borgese <cedric.borgese@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Romain Merland <merlorom@yahoo.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to "unshelve" a shelved P4 commit into
a git commit.
For example:
$ git p4 unshelve 12345
The resulting commit ends up in the branch:
refs/remotes/p4/unshelved/12345
If that branch already exists, it is renamed - for example
the above branch would be saved as p4/unshelved/12345.1.
git-p4 checks that the shelved changelist is based on files
which are at the same Perforce revision as the origin branch
being used for the unshelve (HEAD by default). If they are not,
it will refuse to unshelve. This is to ensure that the unshelved
change does not contain other changes mixed-in.
The reference branch can be changed manually with the "--origin"
option.
The change adds a new Unshelve command class. This just runs the
existing P4Sync code tweaked to handle a shelved changelist.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was the only occurrence of "commitish" in the tree, but as the
log will reveal we've had others in the past. Fixes up code added in
00ad6e3182 ("git-p4: work with a detached head", 2015-11-21).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--update-shelve can now be specified multiple times on the
command-line, to update multiple shelved changelists in a single
submit.
This then means that a git patch series can be mirrored to a
sequence of shelved changelists, and (relatively easily) kept in
sync as changes are made in git.
Note that Perforce does not really support overlapping shelved
changelists where one change touches the files modified by
another. Trying to do this will result in merge conflicts.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).
This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.
Fix a typo in Documentation/git-diff-index.txt while we're there.
Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function p4CmdList accepts a new argument: skip_info. When set to
True it ignores any 'code':'info' entry (skip_info=False by default).
That allows us to fix some of the tests in t9831-git-p4-triggers.sh
known to be broken with verobse p4 triggers
Signed-off-by: Miguel Torroja <miguel.torroja@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option -G of p4 (python marshal output) gives more context about the
data being output. That's useful when using the command "change -o" as
we can distinguish between warning/error line and real change description.
This fixes the case where a p4 trigger for "p4 change" is set and the command git-p4 submit is run.
Signed-off-by: Miguel Torroja <miguel.torroja@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4 was using "git name-rev" to find out the current branch.
That is not safe, since if multiple branches or tags point at
the same revision, the result obtained might not be what is
expected.
Instead use "git symbolic-ref".
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing read_pipe() function returns an empty string on
error, but also returns an empty string if the command returns
an empty string.
This leads to ugly constructions trying to detect error cases.
Add read_pipe_text() which just returns None on error.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git p4" imports changelist that removes paths, it failed to
convert pathnames when the p4 used encoding different from the one
used on the Git side. This has been corrected.
* ls/p4-path-encoding:
git-p4: fix git-p4.pathEncoding for removed files
In a9e38359e3 we taught git-p4 a way to re-encode path names from what
was used in Perforce to UTF-8. This path re-encoding worked properly for
"added" paths. "Removed" paths were not re-encoded and therefore
different from the "added" paths. Consequently, these files were not
removed in a git-p4 cloned Git repository because the path names did not
match.
Fix this by moving the re-encoding to a place that affects "added" and
"removed" paths. Add a test to demonstrate the issue.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running git-p4 on Windows, with multiple git-p4.mapUser entries in
git config - no user mappings are applied to the generated repository.
Reproduction Steps:
1. Add multiple git-p4.mapUser entries to git config on a Windows
machine
2. Attempt to clone a p4 repository
None of the user mappings will be applied.
This issue is actually caused by gitConfigList, using split(os.linesep)
to convert the output of git config --get-all into a list. On Windows,
os.linesep is equal to '\r\n' - however git.exe returns configuration
with a line seperator of '\n'.
This leads to the list returned by gitConfigList containing only one
element - which contains the full output of git config --get-all in
string form, which causes problems for the code introduced to
getUserMapFromPerforceServer in 10d08a149d ("git-p4: map a P4 user to
Git author name and email address", 2016-03-01)
This issue should be caught by the test introduced in 10d08a1, however
would require running on Windows to reproduce.
Using splitlines solves this issue, by splitting config on all
typical delimiters ('\n', '\r\n' etc.)
Signed-off-by: George Vanburgh <gvanburgh@bloomberg.net>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent updates to "git p4" was not usable for older p4 but it
could be made to work with minimum changes. Do so.
* ls/p4-retry-thrice:
git-p4: do not pass '-r 0' to p4 commands
"git p4" that tracks multile p4 paths imported a single changelist
that touches files in these multiple paths as one commit, followed
by many empty commits. This has been fixed.
* gv/p4-multi-path-commit-fix:
git-p4: fix multi-path changelist empty commits
git-p4 crashes when used with a very old p4 client version
that does not support the '-r <number>' option in its commands.
Allow making git-p4 work with old p4 clients by setting git-p4.retries to 0.
Alternatively git-p4.retries could be made opt-in.
But since only very old, barely maintained p4 versions don't support
the '-r' option, the setting-retries-to-0 workaround would do.
The "-r retries" option is present in Perforce 2012.2 Command Reference,
but absent from Perforce 2012.1 Command Reference.
Signed-off-by: Igor Kushnir <igorkuo@gmail.com>
Acked-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" that tracks multile p4 paths imported a single changelist
that touches files in these multiple paths as one commit, followed
by many empty commits. This has been fixed.
* gv/p4-multi-path-commit-fix:
git-p4: fix multi-path changelist empty commits
The `git lfs track` command generates a .gitattributes file with diff
and merge properties [1]. Set the same .gitattributes format for files
tracked with GitLFS in git-p4.
[1] https://github.com/git-lfs/git-lfs/blob/v1.5.3/commands/command_track.go#L121
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" didn't interact with the internal of .git directory
correctly in the modern "git-worktree"-enabled world.
* ld/p4-worktree:
git-p4: support git worktrees
When importing from multiple perforce paths - we may attempt to
import a changelist that contains files from two (or more) of these
depot paths. Currently, this results in multiple git commits - one
containing the changes, and the other(s) as empty commit(s). This
behavior was introduced in commit 1f90a64891 ("git-p4: reduce number
of server queries for fetches", 2015-12-19).
Reproduction Steps:
1. Have a git repo cloned from a perforce repo using multiple
depot paths (e.g. //depot/foo and //depot/bar).
2. Submit a single change to the perforce repo that makes changes
in both //depot/foo and //depot/bar.
3. Run "git p4 sync" to sync the change from #2.
Change is synced as multiple commits, one for each depot path that
was affected.
Using a set, instead of a list inside p4ChangesForPaths() ensures
that each changelist is unique to the returned list, and therefore
only a single commit is generated for each changelist.
Reported-by: James Farwell <jfarwell@vmware.com>
Signed-off-by: George Vanburgh <gvanburgh@bloomberg.net>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting to P4, if git-p4 came across a symlinked
directory, then during the generation of the submit diff, it would
try to open it as a normal file and fail.
Spot symlinks (of any type) and output a description of the symlink
instead.
Add a test case.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" LFS support was broken when LFS stores an empty blob.
* ls/p4-empty-file-on-lfs:
git-p4: fix empty file processing for large file system backend GitLFS
git-p4 would attempt to find the git directory using
its own specific code, which did not know about git
worktrees.
Rework it to use "git rev-parse --git-dir" instead.
Add test cases for worktree usage and specifying
git directory via --git-dir and $GIT_DIR.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git-p4 tried to store an empty file in GitLFS then it crashed while
parsing the pointer file:
oid = re.search(r'^oid \w+:(\w+)', pointerFile, re.MULTILINE).group(1)
AttributeError: 'NoneType' object has no attribute 'group'
This happens because GitLFS does not create a pointer file for an empty
file. Teach git-p4 this behavior to fix the problem and add a test case.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
P4 commands can fail due to random network issues. P4 users can counter
these issues by using a retry flag supported by all p4 commands [1].
Add an integer Git config value `git-p4.retries` to define the number of
retries for all p4 invocations. If the config is not defined then set
the default retry count to 3.
[1] https://www.perforce.com/perforce/doc.current/manuals/cmdref/global.options.html
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds new option "--update-shelve CHANGELIST" which updates
an existing shelved changelist.
The original changelist must have been created by the current user.
This allows workflow something like:
hack hack hack
git commit
git p4 submit --shelve
$mail interested parties about shelved changelist
make corrections
git commit --amend
git p4 submit --update-shelve $CHANGELIST
$mail interested parties about shelved changelist
etc
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --shelve command line argument which invokes p4 shelve instead
of submitting changes. After shelving the changes are reverted from the
p4 workspace.
Signed-off-by: Vinicius Kursancew <viniciusalexandre@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" used a location outside $GIT_DIR/refs/ to place its
temporary branches, which has been moved to refs/git-p4-tmp/.
* ls/p4-tmp-refs:
git-p4: place temporary refs used for branch import under refs/git-p4-tmp
A bug, which caused "git p4" while running under verbose mode to
report paths that are omitted due to branch prefix incorrectly, has
been fixed; the command said "Ignoring file outside of prefix" for
paths that are _inside_.
* ao/p4-has-branch-prefix-fix:
git-p4: correct hasBranchPrefix verbose output
Git-P4 used to place temporary refs under "git-p4-tmp". Since 3da1f37
Git checks that all refs are placed under "refs". Instruct Git-P4 to
place temporary refs under "refs/git-p4-tmp". There are no backwards
compatibility considerations as these refs are transient.
Use "git show-ref --verify" to check the (non-)existience of the refs
instead of file checks assuming the file-based ref backend.
All refs under "refs" are shared across all worktrees. This is not
desired for temporary Git-P4 refs and will be adressed in a later patch.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bug, which caused "git p4" while running under verbose mode to
report paths that are omitted due to branch prefix incorrectly, has
been fixed; the command said "Ignoring file outside of prefix" for
paths that are _inside_.
* ao/p4-has-branch-prefix-fix:
git-p4: correct hasBranchPrefix verbose output
The logic here was inverted, you got a message saying the file is
ignored for each file that is not ignored.
Signed-off-by: Andrew Oakley <aoakley@roku.com>
Acked-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent update to Git LFS broke "git p4" by changing the output from
its "lfs pointer" subcommand.
* ls/p4-lfs:
git-p4: fix Git LFS pointer parsing
travis-ci: express Linux/OS X dependency versions more clearly
travis-ci: update Git-LFS and P4 to the latest version
Git LFS 1.2.0 removed a preamble from the output of the 'git lfs pointer'
command [1] which broke the parsing of this output. Adjust the parser
to support the old and the new format.
Please note that this patch slightly changes the second return parameter
from a list of LF terminated strings to a single string that contains
a number of LF characters.
[1] da2935d9a7
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Helped-by: Sebastian Schuberth <sschuberth@gmail.com>
Helped-by: Ben Woosley <ben.woosley@gmail.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When migrating from Perforce to git the information about P4 jobs
associated with P4 changelists is lost.
Having these jobs listed on messages of related git commits enables smooth
migration for projects that take advantage of e.g. JIRA integration
(which uses jobs on Perforce side and parses commit messages on git side).
The jobs are added to the message in the same format as is expected when
migrating in the reverse direction.
Signed-off-by: Jan Durovec <jan.durovec@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Map a P4 user to a specific name and email address in Git with the
"git-p4.mapUser" config. The config value must be a string adhering
to the format "p4user = First Lastname <email@address.com>".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Luke Diamand
Romain Merland
Ævar Arnfjörð Bjarmason
Martin Ågren
Miguel Torroja
Lars Schneider
George Vanburgh
Igor Kushnir
Vinicius Kursancew
Ville Skyttä
Andrew Oakley
Jan Durovec
Lars Schneider