Add const to struct cache_entry pointers throughout the tree which are
only used for reading. This allows callers to pass in const pointers.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-merge-tree causes a null pointer dereference when a directory
entry exists in only one or two of the three trees being compared with
no corresponding entry in the other tree(s).
When this happens, we want to handle the entry as a directory and not
attempt to mark it as a file merge. Do this by setting the entries bit
in the directory mask when the entry is missing or when it is a
directory, only performing the file comparison when we know that a file
entry exists.
Reported-by: Andreas Jacobsen <andreas@andreasjacobsen.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Tested-by: Andreas Jacobsen <andreas@andreasjacobsen.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/remote-tighten-commandline-parsing:
remote: 'show' and 'prune' can take more than one remote
remote: check for superfluous arguments in 'git remote add'
remote: add a test for extra arguments, according to docs
Sparse issues an "'junk_mode' not declared. Should it be static?"
warning. In order to suppress the warning, since this symbol does
not need more than file visibility, we simply add the static
modifier to its declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit aacecc3 (merge-tree: don't print entries that match "local" -
2013-04-07) had a typo causing the "same in both" check to be incorrect
and check if both the base and "their" versions are removed instead of
checking that both the "our" and "their" versions are removed. Fix
this.
Reported-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Test-written-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update documentation for "log" and "shortlog".
* rr/shortlog-doc:
builtin/shortlog.c: make usage string consistent with log
builtin/log.c: make usage string consistent with doc
git-shortlog.txt: make SYNOPSIS match log, update OPTIONS
git-log.txt: rewrite note on why "--" may be required
git-log.txt: generalize <since>..<until>
git-log.txt: order OPTIONS properly; move <since>..<until>
revisions.txt: clarify the .. and ... syntax
git-shortlog.txt: remove (-h|--help) from OPTIONS
Introduce "--ignore-removal" as a synonym to "--no-all" for "git
add", and improve the 2.0 migration warning with it.
* jc/add-ignore-removal:
git add: rephrase -A/--no-all warning
git add: --ignore-removal is a better named --no-all
In preparation for Git 2.0, "git add -u/-A" without pathspec checks
all the working tree (not limited to the current directory) and
issues a warning when it finds any path that we might add in Git
2.0, because that would mean the users' fingers need to be trained
to explicitly say "." if they want to keep the current behaviour.
However, the check was incomplete, because "git add" usually does
not refresh the index, considers a path that is stat-dirty but has
contents that is otherwise up-to-date in the index as "we might
add", and relies on that it is a no-op to add the same thing again
via the add_file_to_index() API (which also knows not to say "added"
in verbose mode when this happens). We do not want to trigger the
warning for a path that is outside the current directory is merely
stat-dirty, as it won't be added in Git 2.0, either.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Allows remote-helpers to declare they can handle signed tags, and
issue a warning when using those that don't.
* jk/remote-helper-with-signed-tags:
transport-helper: add 'signed-tags' capability
transport-helper: pass --signed-tags=warn-strip to fast-export
fast-export: add --signed-tags=warn-strip mode
"git merge $(git rev-parse v1.8.2)" behaved quite differently from
"git merge v1.8.2", as if v1.8.2 were written as v1.8.2^0 and did
not pay much attention to the annotated tag payload. Make the code
notice the type of the tag object, in addition to the dwim_ref()
based classification the current code uses (i.e. the name appears in
refs/tags/) to decide when to special case merging of tags.
* jc/merge-tag-object:
t6200: test message for merging of an annotated tag
t6200: use test_config/test_unconfig
merge: a random object may not necssarily be a commit
The 'git remote add' subcommand did not check for superfluous command
line arguments. Make it so.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage string for cherry-pick and revert has never been updated to
reflect their ability to handle multiple commits. Other documentation is
already correct.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pretty-printing body of the commit that is stored in non UTF-8
encoding did not work well. The early part of this series fixes
it. And then it adds %C(auto) specifier that turns the coloring on
when we are emitting to the terminal, and adds column-aligning
format directives.
* nd/pretty-formats:
pretty: support %>> that steal trailing spaces
pretty: support truncating in %>, %< and %><
pretty: support padding placeholders, %< %> and %><
pretty: add %C(auto) for auto-coloring
pretty: split color parsing into a separate function
pretty: two phase conversion for non utf-8 commits
utf8.c: add reencode_string_len() that can handle NULs in string
utf8.c: add utf8_strnwidth() with the ability to skip ansi sequences
utf8.c: move display_mode_esc_sequence_len() for use by other functions
pretty: share code between format_decoration and show_decorations
pretty-formats.txt: wrap long lines
pretty: get the correct encoding for --pretty:format=%e
pretty: save commit encoding from logmsg_reencode if the caller needs it
Fixes a handful of issues in the code to traverse working tree to
find untracked and/or ignored files, cleans up and optimizes the
codepath in general.
* kb/status-ignored-optim-2:
dir.c: git-status --ignored: don't scan the work tree twice
dir.c: git-status --ignored: don't scan the work tree three times
dir.c: git-status: avoid is_excluded checks for tracked files
dir.c: replace is_path_excluded with now equivalent is_excluded API
dir.c: unify is_excluded and is_path_excluded APIs
dir.c: move prep_exclude
dir.c: factor out parts of last_exclude_matching for later reuse
dir.c: git-clean -d -X: don't delete tracked directories
dir.c: make 'git-status --ignored' work within leading directories
dir.c: git-status --ignored: don't list empty directories as ignored
dir.c: git-ls-files --directories: don't hide empty directories
dir.c: git-status --ignored: don't list empty ignored directories
dir.c: git-status --ignored: don't list files in ignored directories
dir.c: git-status --ignored: don't drop ignored directories
When receive-pack detects error in the pack header it received in
order to decide which of unpack-objects or index-pack to run, it
returned without closing the error stream, which led to a hang
sideband thread.
* jk/receive-pack-deadlocks-with-early-failure:
receive-pack: close sideband fd on early pack errors
Now we have a synonym --ignore-removal for --no-all, we can rephrase
the Git 2.0 transition warning message in a more natural way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the historical context of "git add --all ." that pays attention
to "all kinds of changes" (implying "without ignoring removals"),
the option to countermand it "--no-all" may have made sense, but
because we will be making "--all" the default when a pathspec is
given, it makes more sense to rename the option to a more explicit
"--ignore-removal". The "--all" option naturally becomes its
negation, "--no-ignore-removal".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" did not work if a repository pointed at by the
"--reference" option is a gitfile that points at another place.
* as/clone-reference-with-gitfile:
clone: Allow repo using gitfile as a reference
clone: Fix error message for reference repository
Preparatory steps to make "git add <pathspec>" take notice of
removed paths that match <pathspec> by default in Git 2.0.
* 'jc/add-2.0-delete-default' (early part):
git add: rephrase the "removal will cease to be ignored" warning
git add: rework the logic to warn "git add <pathspec>..." default change
git add: start preparing for "git add <pathspec>..." to default to "-A"
builtin/add.c: simplify boolean variables
Make the initial "sparse" selection of the paths more sticky across
"git checkout".
* nd/checkout-keep-sparse:
checkout: add --ignore-skip-worktree-bits in sparse checkout mode
A commit object whose author or committer ident are malformed
crashed some code that trusted that a name, an email and an
timestamp can always be found in it.
* jk/chopped-ident:
blame: handle broken commit headers gracefully
pretty: handle broken commit headers gracefully
cat-file: print tags raw for "cat-file -p"
"--" is used to separate pathspecs from the rev specs, and not rev
specs from the options, as the shortlog_usage string currently
indicates. In correcting this usage string, make it consistent with
the log_usage string.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace '<since>..<until>' with '<revision range>', in accordance with
the documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now the logic to decide when to warn has been tightened, we know the
user is in a situation where the current and future behaviours will
be different. Spell out what happens with these two versions and
how to explicitly ask for the behaviour, and suggest "git status" as
a way to inspect the current status.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit a22e6f8 (receive-pack: send pack-processing
stderr over sideband, 2012-09-21), receive-pack will start
an async sideband thread to copy the stderr from our
index-pack or unpack-objects child to the client. We hand
the thread's input descriptor to unpack(), which puts it in
the "err" member of the "struct child_process".
After unpack() returns, we use finish_async() to reap the
sideband thread. The thread is only ready to die when it
gets EOF on its pipe, which is connected to the err
descriptor. So we expect all of the write ends of that pipe
to be closed as part of unpack().
Normally, this works fine. After start_command forks, it
closes the parent copy of the descriptor. Then once the
child exits (whether it was successful or not), that closes
the only remaining writer.
However, there is one code-path in unpack() that does not
handle this. Before we decide which of unpack-objects or
index-pack to use, we read the pack header ourselves to see
how many objects it contains. If there is an error here, we
exit without running either sub-command, the pipe descriptor
remains open, and we are in a deadlock, waiting for the
sideband thread to die (which is in turn waiting for us to
close the pipe).
We can fix this by making sure that unpack() always closes
the pipe before returning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In Git 2.0, "git add -u" and "git add -A" without any pathspec will
update the index for all paths, including those outside the current
directory, making it more consistent with "commit -a". To help the
migration pain, a warning is issued when the differences between the
current behaviour and the upcoming behaviour matters, i.e. when the
user has local changes outside the current directory.
* 'jn/add-2.0-u-A-sans-pathspec' (early part):
add -A: only show pathless 'add -A' warning when changes exist outside cwd
add -u: only show pathless 'add -u' warning when changes exist outside cwd
add: make warn_pathless_add() a no-op after first call
add: add a blank line at the end of pathless 'add [-u|-A]' warning
add: make pathless 'add [-u|-A]' warning a file-global function
Teach "--human-readable" aka "-H" option to "git count-objects" to
show various large numbers in Ki/Mi/GiB scaled as necessary.
* ap/strbuf-humanize:
count-objects: add -H option to humanize sizes
strbuf: create strbuf_humanise_bytes() to show byte sizes
The commit encoding is parsed by logmsg_reencode, there's no need for
the caller to re-parse it again. The reencoded message now has the new
encoding, not the original one. The caller would need to read commit
object again before parsing.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The resolution of some corner cases by "git merge-tree" were
inconsistent between top-of-the-tree and in a subdirectory.
* jk/merge-tree-added-identically:
merge-tree: don't print entries that match "local"
Allows format-patch --cover-letter to be configurable; the most
notable is the "auto" mode to create cover-letter only for multi
patch series.
* fc/send-email-annotate:
rebase-am: explicitly disable cover-letter
format-patch: trivial cleanups
format-patch: add format.coverLetter configuration variable
log: update to OPT_BOOL
format-patch: refactor branch name calculation
format-patch: improve head calculation for cover-letter
send-email: make annotate configurable
Update the informational message when "git checkout" leaves the
detached head state.
* kb/co-orphan-suggestion-short-sha1:
checkout: abbreviate hash in suggest_reattach
The earlier logic to warn against "git add subdir" that is run
without "-A" or "--no-all" was only to check any <pathspec> given
exactly spells a directory name that (still) exists on the
filesystem. This had number of problems:
* "git add '*dir'" (note that the wildcard is hidden from the
shell) would not trigger the warning.
* "git add '*.py'" would behave differently between the current
version of Git and Git 2.0 for the same reason as "subdir", but
would not trigger the warning.
* "git add dir" for a submodule "dir" would just update the index
entry for the submodule "dir" without ever recursing into it, and
use of "-A" or "--no-all" would matter. But the logic only
checks the directory-ness of "dir" and gives an unnecessary
warning.
Rework the logic to detect the case where the behaviour will be
different in Git 2.0, and issue a warning only when it matters.
Even with the code before this warning, "git add subdir" will have
to traverse the directory in order to find _new_ files the index
does not know about _anyway_, so we can do this check without adding
an extra pass to find if <pathspec> matches any removed file.
This essentially updates the "add_files_to_cache()" public API to
"update_files_in_cache()" API that is internal to "git add", because
with the "--all" option, the function is no longer about "adding"
paths to the cache, but is also used to remove them.
There are other callers of the former from "checkout" (used when
"checkout -m" prepares the temporary tree that represents the local
modifications to be merged) and "commit" ("commit --include" that
picks up local changes in addition to what is in the index). Since
ADD_CACHE_IGNORE_ERRORS (aka "--no-all") is not used by either of
them, once dust settles after Git 2.0 and the warning becomes
unnecessary, we may want to unify these two functions again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
split_ident_line() can leave us with the pointers date_begin, date_end,
tz_begin and tz_end all set to NULL. Check them before use and supply
the same fallback values as in the case of a negative return code from
split_ident_line().
The "(unknown)" is not actually shown in the output, though, because it
will be converted to a number (zero) eventually.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "cat-file -p" prints commits, it shows them in their
raw format, since git's format is already human-readable.
For tags, however, we print the whole thing raw except for
one thing: we convert the timestamp on the tagger line into a
human-readable date.
This dates all the way back to a0f15fa (Pretty-print tagger
dates, 2006-03-01). At that time there was no other way to
pretty-print a tag. These days, however, neither of those
matters much. The normal way to pretty-print a tag is with
"git show", which is much more flexible than "cat-file -p".
Commit a0f15fa also built "verify-tag --verbose" (and
subsequently "tag -v") around the "cat-file -p" output.
However, that behavior was lost in commit 62e09ce (Make git
tag a builtin, 2007-07-20), and we went back to printing
the raw tag contents. Nobody seems to have noticed the bug
since then (and it is arguably a saner behavior anyway, as
it shows the actual bytes for which we verified the
signature).
Let's drop the tagger-date formatting for "cat-file -p". It
makes us more consistent with cat-file's commit
pretty-printer, and as a bonus, we can drop the hand-rolled
tag parsing code in cat-file (which happened to behave
inconsistently with the tag pretty-printing code elsewhere).
This is a change of output format, so it's possible that
some callers could considered this a regression. However,
the original behavior was arguably a bug (due to the
inconsistency with commits), likely nobody was relying on it
(even we do not use it ourselves these days), and anyone
relying on the "-p" pretty-printer should be able to expect
a change in the output format (i.e., while "cat-file" is
plumbing, the output format of "-p" was never guaranteed to
be stable).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new core.commentchar configuration was not applied to a few
places.
* rt/commentchar-fmt-merge-msg:
fmt-merge-msg: use core.commentchar in tag signatures completely
fmt-merge-msg: respect core.commentchar in people credits
"git show-branch" was not prepared to show a very long run of
ancestor operators e.g. foobar^2~2^2^2^2...^2~4 correctly.
* jk/show-branch-strbuf:
show-branch: use strbuf instead of static buffer
'git-status --ignored' still scans the work tree twice to collect
untracked and ignored files, respectively.
fill_directory / read_directory already supports collecting untracked and
ignored files in a single directory scan. However, the DIR_COLLECT_IGNORED
flag to enable this has some git-add specific side-effects (e.g. it
doesn't recurse into ignored directories, so listing ignored files with
--untracked=all doesn't work).
The DIR_SHOW_IGNORED flag doesn't list untracked files and returns ignored
files in dir_struct.entries[] (instead of dir_struct.ignored[] as
DIR_COLLECT_IGNORED). DIR_SHOW_IGNORED is used all throughout git.
We don't want to break the existing API, so lets introduce a new flag
DIR_SHOW_IGNORED_TOO that lists untracked as well as ignored files similar
to DIR_COLLECT_FILES, but will recurse into sub-directories based on the
other flags as DIR_SHOW_IGNORED does.
In dir.c::read_directory_recursive, add ignored files to either
dir_struct.entries[] or dir_struct.ignored[] based on the flags. Also move
the DIR_COLLECT_IGNORED case here so that filling result lists is in a
common place.
In wt-status.c::wt_status_collect_untracked, use the new flag and read
results from dir_struct.ignored[]. Remove the extra fill_directory call.
builtin/check-ignore.c doesn't call fill_directory, setting the git-add
specific DIR_COLLECT_IGNORED flag has no effect here. Remove for clarity.
Update API documentation to reflect the changes.
Performance: with this patch, 'git-status --ignored' is typically as fast
as 'git-status'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise when using 'git branch -vv' it's hard to see them among so
much output.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This issues a warning while stripping signatures from signed tags, which
allows us to use it as default behaviour for remote helpers which cannot
specify how to handle signed tags.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -- <paths>" is usually used to restore all modified
files in <paths>. In sparse checkout mode, this command is overloaded
with another meaning: to add back all files in <paths> that are
excluded by sparse patterns.
As the former makes more sense for day-to-day use. Switch it to the
default and the latter enabled with --ignore-skip-worktree-bits.
While at there, add info/sparse-checkout to gitrepository-layout.txt
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe
Junio C Hamano
John Keeping
Ramsay Jones
Thomas Rast
Kevin Bracey
Ramkumar Ramachandra
Jeff King
Nguyễn Thái Ngọc Duy
Karsten Blees
Felipe Contreras