Граф коммитов

21 Коммитов

Автор SHA1 Сообщение Дата
Jeff King 4981fe750b pkt-line: share buffer/descriptor reading implementation
The packet_read function reads from a descriptor. The
packet_get_line function is similar, but reads from an
in-memory buffer, and uses a completely separate
implementation. This patch teaches the generic packet_read
function to accept either source, and we can do away with
packet_get_line's implementation.

There are two other differences to account for between the
old and new functions. The first is that we used to read
into a strbuf, but now read into a fixed size buffer. The
only two callers are fine with that, and in fact it
simplifies their code, since they can use the same
static-buffer interface as the rest of the packet_read_line
callers (and we provide a similar convenience wrapper for
reading from a buffer rather than a descriptor).

This is technically an externally-visible behavior change in
that we used to accept arbitrary sized packets up to 65532
bytes, and now cap out at LARGE_PACKET_MAX, 65520. In
practice this doesn't matter, as we use it only for parsing
smart-http headers (of which there is exactly one defined,
and it is small and fixed-size). And any extension headers
would be breaking the protocol to go over LARGE_PACKET_MAX
anyway.

The other difference is that packet_get_line would return
on error rather than dying. However, both callers of
packet_get_line are actually improved by dying.

The first caller does its own error checking, but we can
drop that; as a result, we'll actually get more specific
reporting about protocol breakage when packet_read dies
internally. The only downside is that packet_read will not
print the smart-http URL that failed, but that's not a big
deal; anybody not debugging can already see the remote's URL
already, and anybody debugging would want to run with
GIT_CURL_VERBOSE anyway to see way more information.

The second caller, which is just trying to skip past any
extra smart-http headers (of which there are none defined,
but which we allow to keep room for future expansion), did
not error check at all. As a result, it would treat an error
just like a flush packet. The resulting mess would generally
cause an error later in get_remote_heads, but now we get
error reporting much closer to the source of the problem.

Brown-paper-bag-fixes-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-24 00:14:15 -08:00
Jeff King 74543a0423 pkt-line: provide a LARGE_PACKET_MAX static buffer
Most of the callers of packet_read_line just read into a
static 1000-byte buffer (callers which handle arbitrary
binary data already use LARGE_PACKET_MAX). This works fine
in practice, because:

  1. The only variable-sized data in these lines is a ref
     name, and refs tend to be a lot shorter than 1000
     characters.

  2. When sending ref lines, git-core always limits itself
     to 1000 byte packets.

However, the only limit given in the protocol specification
in Documentation/technical/protocol-common.txt is
LARGE_PACKET_MAX; the 1000 byte limit is mentioned only in
pack-protocol.txt, and then only describing what we write,
not as a specific limit for readers.

This patch lets us bump the 1000-byte limit to
LARGE_PACKET_MAX. Even though git-core will never write a
packet where this makes a difference, there are two good
reasons to do this:

  1. Other git implementations may have followed
     protocol-common.txt and used a larger maximum size. We
     don't bump into it in practice because it would involve
     very long ref names.

  2. We may want to increase the 1000-byte limit one day.
     Since packets are transferred before any capabilities,
     it's difficult to do this in a backwards-compatible
     way. But if we bump the size of buffer the readers can
     handle, eventually older versions of git will be
     obsolete enough that we can justify bumping the
     writers, as well. We don't have plans to do this
     anytime soon, but there is no reason not to start the
     clock ticking now.

Just bumping all of the reading bufs to LARGE_PACKET_MAX
would waste memory. Instead, since most readers just read
into a temporary buffer anyway, let's provide a single
static buffer that all callers can use. We can further wrap
this detail away by having the packet_read_line wrapper just
use the buffer transparently and return a pointer to the
static storage.  That covers most of the cases, and the
remaining ones already read into their own LARGE_PACKET_MAX
buffers.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20 13:42:22 -08:00
Jeff King 819b929d33 pkt-line: teach packet_read_line to chomp newlines
The packets sent during ref negotiation are all terminated
by newline; even though the code to chomp these newlines is
short, we end up doing it in a lot of places.

This patch teaches packet_read_line to auto-chomp the
trailing newline; this lets us get rid of a lot of inline
chomping code.

As a result, some call-sites which are not reading
line-oriented data (e.g., when reading chunks of packfiles
alongside sideband) transition away from packet_read_line to
the generic packet_read interface. This patch converts all
of the existing callsites.

Since the function signature of packet_read_line does not
change (but its behavior does), there is a possibility of
new callsites being introduced in later commits, silently
introducing an incompatibility.  However, since a later
patch in this series will change the signature, such a
commit would have to be merged directly into this commit,
not to the tip of the series; we can therefore ignore the
issue.

This is an internal cleanup and should produce no change of
behavior in the normal case. However, there is one corner
case to note. Callers of packet_read_line have never been
able to tell the difference between a flush packet ("0000")
and an empty packet ("0004"), as both cause packet_read_line
to return a length of 0. Readers treat them identically,
even though Documentation/technical/protocol-common.txt says
we must not; it also says that implementations should not
send an empty pkt-line.

By stripping out the newline before the result gets to the
caller, we will now treat the newline-only packet ("0005\n")
the same as an empty packet, which in turn gets treated like
a flush packet. In practice this doesn't matter, as neither
empty nor newline-only packets are part of git's protocols
(at least not for the line-oriented bits, and readers who
are not expecting line-oriented packets will be calling
packet_read directly, anyway). But even if we do decide to
care about the distinction later, it is orthogonal to this
patch.  The right place to tighten would be to stop treating
empty packets as flush packets, and this change does not
make doing so any harder.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20 13:42:21 -08:00
Jeff King 0380942902 pkt-line: provide a generic reading function with options
Originally we had a single function for reading packetized
data: packet_read_line. Commit 46284dd grew a more "gentle"
form, packet_read, that returns an error instead of dying
upon reading a truncated input stream. However, it is not
clear from the names which should be called, or what the
difference is.

Let's instead make packet_read be a generic public interface
that can take option flags, and update the single callsite
that uses it. This is less code, more clear, and paves the
way for introducing more options into the generic interface
later. The function signature is changed, so there should be
no hidden conflicts with topics in flight.

While we're at it, we'll document how error conditions are
handled based on the options, and rename the confusing
"return_line_fail" option to "gentle_on_eof".  While we are
cleaning up the names, we can drop the "return_line_fail"
checks in packet_read_internal entirely.  They look like
this:

  ret = safe_read(..., return_line_fail);
  if (return_line_fail && ret < 0)
	  ...

The check for return_line_fail is a no-op; safe_read will
only ever return an error value if return_line_fail was true
in the first place.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20 13:42:21 -08:00
Jeff King cdf4fb8e33 pkt-line: drop safe_write function
This is just write_or_die by another name. The one
distinction is that write_or_die will treat EPIPE specially
by suppressing error messages. That's fine, as we die by
SIGPIPE anyway (and in the off chance that it is disabled,
write_or_die will simulate it).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20 13:42:21 -08:00
Jeff King e148542870 pkt-line: move a misplaced comment
The comment describing the packet writing interface was
originally written above packet_write, but migrated to be
above safe_write in f3a3214, probably because it is meant to
generally describe the packet writing interface and not a
single function. Let's move it into the header file, where
users of the interface are more likely to see it.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20 13:42:21 -08:00
Heiko Voigt 46284dd152 remove the impression of unexpectedness when access is denied
If a server accessed through ssh is denying access git will currently
issue the message

	"fatal: The remote end hung up unexpectedly"

as the last line. This sounds as if something really ugly just happened.
Since this is a quite typical situation in which users regularly get
we do not say that if it happens at the beginning when reading the
remote heads.

If its in the very first beginning of reading the remote heads it is
very likely an authentication error or a missing repository.

If it happens later during reading the remote heads we still indicate
that it happened during this initial contact phase.

Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-19 13:37:02 -07:00
Stephen Boyd 1e4cd68c00 sparse: Fix errors and silence warnings
* load_file() returns a void pointer but is using 0 for the return
   value

 * builtin/receive-pack.c forgot to include builtin.h

 * packet_trace_prefix can be marked static

 * ll_merge takes a pointer for its last argument, not an int

 * crc32 expects a pointer as the second argument but Z_NULL is defined
   to be 0 (see 38f4d13 sparse fix: Using plain integer as NULL pointer,
   2006-11-18 for more info)

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-03 10:14:53 -07:00
Jeff King bbc30f9963 add packet tracing debug code
This shows a trace of all packets coming in or out of a given
program. This can help with debugging object negotiation or
other protocol issues.

To keep the code changes simple, we operate at the lowest
level, meaning we don't necessarily understand what's in the
packets. The one exception is a packet starting with "PACK",
which causes us to skip that packet and turn off tracing
(since the gigantic pack data will not be interesting to
read, at least not in the trace format).

We show both written and read packets. In the local case,
this may mean you will see packets twice (written by the
sender and read by the receiver). However, for cases where
the other end is remote, this allows you to see the full
conversation.

Packet tracing can be enabled with GIT_TRACE_PACKET=<foo>,
where <foo> takes the same arguments as GIT_TRACE.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-08 12:12:04 -08:00
Shawn O. Pearce 743c4b7b0f pkt-line: Make packet_read_line easier to debug
When there is an error parsing the 4 byte length component we now
display it as part of the die message, this may hint as to what
data was misunderstood by the application.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-30 19:20:53 -07:00
Shawn O. Pearce f5615d2467 pkt-line: Add strbuf based functions
These routines help to work with pkt-line values inside of a strbuf,
permitting simple formatting of buffered network messages.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-30 19:20:53 -07:00
Thomas Rast d824cbba02 Convert existing die(..., strerror(errno)) to die_errno()
Change calls to die(..., strerror(errno)) to use the new die_errno().

In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.

Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-27 11:14:53 -07:00
Heikki Orsila c697ad143b Cleanup xread() loops to use read_in_full()
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-03 22:15:25 -07:00
Junio C Hamano a6080a0a44 War on whitespace
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time.  There are a few files that need
to have trailing whitespaces (most notably, test vectors).  The results
still passes the test, and build result in Documentation/ area is unchanged.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 00:04:01 -07:00
Johan Herland 8a912bcb25 Ensure return value from xread() is always stored into an ssize_t
This patch fixes all calls to xread() where the return value is not
stored into an ssize_t. The patch should not have any effect whatsoever,
other than putting better/more appropriate type names on variables.

Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-15 21:16:03 -07:00
Nicolas Pitre b3d9899324 make git a bit less cryptic on fetch errors
The remote server might not want to tell why it doesn't like us for
security reasons, but let's make the client report such error in a bit
less confusing way.  The remote failure remains a mystery, but the local
message might be a bit less so.

[jc: with a gentle wording updates from Andy Parkins]

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-18 15:31:28 -08:00
Junio C Hamano 9d24ed4f01 Merge branch 'ff/c99' into next
* ff/c99:
  Remove all void-pointer arithmetic.
2006-06-21 03:51:59 -07:00
Junio C Hamano 583b7ea31b upload-pack/fetch-pack: support side-band communication
This implements a protocol extension between fetch-pack and
upload-pack to allow stderr stream from upload-pack (primarily
used for the progress bar display) to be passed back.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-21 02:50:32 -07:00
Florian Forster 1d7f171c3a Remove all void-pointer arithmetic.
ANSI C99 doesn't allow void-pointer arithmetic. This patch fixes this in
various ways. Usually the strategy that required the least changes was used.

Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-20 01:59:46 -07:00
Junio C Hamano 1c15afb934 xread/xwrite: do not worry about EINTR at calling sites.
We had errno==EINTR check after read(2)/write(2) sprinkled all
over the places, always doing continue.  Consolidate them into
xread()/xwrite() wrapper routines.

Credits for suggestion goes to HPA -- bugs are mine.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-19 18:28:16 -08:00
Linus Torvalds f3a3214e83 Make send/receive-pack be closer to doing something interesting 2005-06-29 20:50:15 -07:00