Граф коммитов

16 Коммитов

Автор SHA1 Сообщение Дата
Thomas Rast 0b444cdb19 Documentation: spell 'git cmd' without dash throughout
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.

The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.

Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
2010-01-10 13:01:28 +01:00
Michael J Gruber 3c652d1671 Documentation: Fix a few i.e./e.g. mix-ups
A git bundle can be transported by several means (such as e-mail), not
only by snekaernet, so use e.g. instead of i.e.

The mix-up in git-bundle.txt is obvious.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-01 12:09:46 -08:00
David J. Mellor 1d52b02696 Documentation: minor grammatical fixes and rewording in git-bundle.txt
This commit also converts all reference specifications to a monospaced font,
as the embedded ~ character used in some of the references sometimes causes
the text up to the next ~ to be displayed incorrectly as a subscript when the
HTML pages are generated. This was tested with asciidoc 8.2.5.

Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-22 20:59:20 -07:00
Santi Béjar ffe4da1573 doc/bundle: Use the more conventional suffix '.bundle'
Although it does not matter in general it is handled different by
"git clone", as it removes it to make the "humanish" name of the
new repository.

Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-08 21:42:17 -08:00
Nanako Shiraishi 8aa7eebfb3 git-bundle doc: update examples
This rewrites the example part of the bundle doucmentation to follow
the suggestion made by Junio during a recent discussion (gmane 108030).

Instead of just showing different ways to create and use bundles in a
disconnected fashion, the rewritten example first shows the simplest
"full cycle" of sneakernet workflow, and then introduces various
variations.

The words are mostly taken from Junio's outline. I only reformatted
them and proofread to make sure the end result flows naturally.

Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-04 15:16:35 -08:00
Jonathan Nieder ba020ef5eb manpages: italicize git command names (which were in teletype font)
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.

Using

	doit () {
	  perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
	}
	for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
	        merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
	do
	  doit <"$i" >"$i+" && mv "$i+" "$i"
	done
	git diff

.

Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05 11:24:40 -07:00
Jonathan Nieder 483bc4f045 Documentation formatting and cleanup
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.

While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.

Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01 17:20:16 -07:00
Jonathan Nieder b1889c36d8 Documentation: be consistent about "git-" versus "git "
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)

This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.

The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.

Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01 17:20:15 -07:00
Christian Couder 9e1f0a85c6 documentation: move git(7) to git(1)
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06 11:18:28 -07:00
Gerrit Pape 049c1ad2d6 Documentation/git-bundle.txt: fix synopsis
The <git-rev-list args> are mandatory to git bundle create, not
optional.  The usage output of git bundle is already right on this.

Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-27 22:01:31 -07:00
Santi Béjar 99d8ea2c5c git-bundle.txt: Add different strategies to create the bundle
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-24 18:51:46 -08:00
Dan McGee 5162e69732 Documentation: rename gitlink macro to linkgit
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:

@@ -149,7 +153,10 @@
 # Inline macros.
 # Backslash prefix required for escape processing.
 # (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
 # Anchor: [[[id]]]. Bibliographic anchor.
 (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
 # Anchor: [[id,xreflabel]]

This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06 18:41:44 -08:00
Miklos Vajna ee8245b54a git-bundle: fix commandline examples in the manpage
Multiple commands were displayed in one line, making the manpage hard to read.

Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-29 15:40:17 -07:00
Matthias Kestenholz e448ff877b Documentation: Added [verse] to SYNOPSIS where necessary
Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-18 21:47:40 -07:00
Michael Coleman 20f50f1670 fix various doc typos
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-01 03:27:36 -08:00
Johannes Schindelin 2e0afafebd Add git-bundle: move objects and references by archive
Some workflows require use of repositories on machines that cannot be
connected, preventing use of git-fetch / git-push to transport objects and
references between the repositories.

git-bundle provides an alternate transport mechanism, effectively allowing
git-fetch and git-pull to operate using sneakernet transport. `git-bundle
create` allows the user to create a bundle containing one or more branches
or tags, but with specified basis assumed to exist on the target
repository. At the receiving end, git-bundle acts like git-fetch-pack,
allowing the user to invoke git-fetch or git-pull using the bundle file as
the URL. git-fetch and git-ls-remote determine they have a bundle URL by
checking that the URL points to a file, but are otherwise unchanged in
operation with bundles.

The original patch was done by Mark Levedahl <mdl123@verizon.net>.

It was updated to make git-bundle a builtin, and get rid of the tar
format: now, the first line is supposed to say "# v2 git bundle", the next
lines either contain a prerequisite ("-" followed by the hash of the
needed commit), or a ref (the hash of a commit, followed by the name of
the ref), and finally the pack. As a result, the bundle argument can be
"-" now.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-22 22:30:33 -08:00