An experiment to use two files (the base file and incremental
changes relative to it) to represent the index to reduce I/O cost
of rewriting a large index when only small part of the working tree
changes.
* nd/split-index: (32 commits)
t1700: new tests for split-index mode
t2104: make sure split index mode is off for the version test
read-cache: force split index mode with GIT_TEST_SPLIT_INDEX
read-tree: note about dropping split-index mode or index version
read-tree: force split-index mode off on --index-output
rev-parse: add --shared-index-path to get shared index path
update-index --split-index: do not split if $GIT_DIR is read only
update-index: new options to enable/disable split index mode
split-index: strip pathname of on-disk replaced entries
split-index: do not invalidate cache-tree at read time
split-index: the reading part
split-index: the writing part
read-cache: mark updated entries for split index
read-cache: save deleted entries in split index
read-cache: mark new entries for split index
read-cache: split-index mode
read-cache: save index SHA-1 after reading
entry.c: update cache_changed if refresh_cache is set in checkout_entry()
cache-tree: mark istate->cache_changed on prime_cache_tree()
cache-tree: mark istate->cache_changed on cache tree update
...
It's a common idiom to match a prefix and then skip past it
with strlen, like:
if (starts_with(foo, "bar"))
foo += strlen("bar");
This avoids magic numbers, but means we have to repeat the
string (and there is no compiler check that we didn't make a
typo in one of the strings).
We can use skip_prefix to handle this case without repeating
ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other fill_stat_cache_info() is on new entries, which should set
CE_ENTRY_ADDED in cache_changed, so we're safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "update-ref --stdin [-z]" and then introduce a transactional
support for (multi-)reference updates.
* mh/ref-transaction: (27 commits)
ref_transaction_commit(): work with transaction->updates in place
struct ref_update: add a type field
struct ref_update: add a lock field
ref_transaction_commit(): simplify code using temporary variables
struct ref_update: store refname as a FLEX_ARRAY
struct ref_update: rename field "ref_name" to "refname"
refs: remove API function update_refs()
update-ref --stdin: reimplement using reference transactions
refs: add a concept of a reference transaction
update-ref --stdin: harmonize error messages
update-ref --stdin: improve the error message for unexpected EOF
t1400: test one mistake at a time
update-ref --stdin -z: deprecate interpreting the empty string as zeros
update-ref.c: extract a new function, parse_next_sha1()
t1400: test that stdin -z update treats empty <newvalue> as zeros
update-ref --stdin: simplify error messages for missing oldvalues
update-ref --stdin: make error messages more consistent
update-ref --stdin: improve error messages for invalid values
update-ref.c: extract a new function, parse_refname()
parse_cmd_verify(): copy old_sha1 instead of evaluating <oldvalue> twice
...
Change checkout.c to check if a ref exists instead of checking if a loose ref
file exists when deciding if to delete an orphaned log file. Otherwise, if a
ref only exists as a packed ref without a corresponding loose ref for the
currently checked out branch, we risk that the reflog will be deleted when we
switch to a different branch.
Update the reflog tests to check for this bug.
The following reproduces the bug:
$ git init-db
$ git config core.logallrefupdates true
$ git commit -m Initial --allow-empty
[master (root-commit) bb11abe] Initial
$ git reflog master
[8561dcb master@{0}: commit (initial): Initial]
$ find .git/{refs,logs} -type f | grep master
[.git/refs/heads/master]
[.git/logs/refs/heads/master]
$ git branch foo
$ git pack-refs --all
$ find .git/{refs,logs} -type f | grep master
[.git/logs/refs/heads/master]
$ git checkout foo
$ find .git/{refs,logs} -type f | grep master
... reflog file is missing ...
$ git reflog master
... nothing ...
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two new functions, reflog_exists and delete_reflog, to hide the internal
reflog implementation (that they are files under .git/logs/...) from callers.
Update checkout.c to use these functions in update_refs_for_switch instead of
building pathnames and calling out to file access functions. Update reflog.c
to use these to check if the reflog exists. Now there are still many places
in reflog.c where we are still leaking the reflog storage implementation but
this at least reduces the number of such dependencies by one. Finally
change two places in refs.c itself to use the new function to check if a ref
exists or not isntead of build-path-and-stat(). Now, this is strictly not all
that important since these are in parts of refs that are implementing the
actual file storage backend but on the other hand it will not hurt either.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eradicate mistaken use of "nor" (that is, essentially "nor" used
not in "neither A nor B" ;-)) from in-code comments, command output
strings, and documentations.
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
Make sure that the help text given to describe the "<param>" part
of the "git cmd --option=<param>" does not contain SP or _,
e.g. "--gpg-sign=<key-id>" option for "git commit" is not spelled
as "--gpg-sign=<key id>".
* jc/rev-parse-argh-dashed-multi-words:
parse-options: make sure argh string does not have SP or _
update-index: teach --cacheinfo a new syntax "mode,sha1,path"
parse-options: multi-word argh should use dash to separate words
Given that these constants are only being used when updating
references, it is inappropriate to give them such generic names as
"DIE_ON_ERR". So prefix their names with "UPDATE_REFS_".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When it is not necessary to edit a commit log message (e.g. "git
commit -m" is given a message without specifying "-e"), we used to
disable the spawning of the editor by overriding GIT_EDITOR, but
this means all the uses of the editor, other than to edit the
commit log message, are also affected.
* bp/commit-p-editor:
run-command: mark run_hook_with_custom_index as deprecated
merge hook tests: fix and update tests
merge: fix GIT_EDITOR override for commit hook
commit: fix patch hunk editing with "commit -p -m"
test patch hunk editing with "commit -p -m"
merge hook tests: use 'test_must_fail' instead of '!'
merge hook tests: fix missing '&&' in test
"When you need to use space, use dash" is a strange way to say that
you must not use a space. Because it is more common for the command
line descriptions to use dashed-multi-words, you do not even want to
use spaces in these places. Rephrase the documentation to avoid
this strangeness.
Fix a few existing multi-word argument help strings, i.e.
- GPG key-ids given to -S/--gpg-sign are "key-id";
- Refs used for storing notes are "notes-ref"; and
- Expiry timestamps given to --expire are "expiry-date".
and update the corresponding documentation pages.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't change git environment: move the GIT_EDITOR=":" override to the
hook command subprocess, like it's already done for GIT_INDEX_FILE.
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps reduce the number of match_pathspec_depth() call sites and
show how match_pathspec_depth() is used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/robustify-parse-commit:
checkout: do not die when leaving broken detached HEAD
use parse_commit_or_die instead of custom message
use parse_commit_or_die instead of segfaulting
assume parse_commit checks for NULL commit
assume parse_commit checks commit->object.parsed
log_tree_diff: die when we fail to parse a commit
"git checkout topic", when there is not yet a local "topic" branch
but there is a unique remote-tracking branch for a remote "topic"
branch, pretended as if "git checkout -t -b topic remote/$r/topic"
(for that unique remote $r) was run. This hack however was not
implemented for "git checkout topic --".
* mm/checkout-auto-track-fix:
checkout: proper error message on 'git checkout foo bar --'
checkout: allow dwim for branch creation for "git checkout $branch --"
If we move away from a detached HEAD that has broken or
corrupted commits, we might die in two places:
1. Printing the "old HEAD was..." message.
2. Printing the list of orphaned commits.
In both cases, we ignore the return value of parse_commit
and feed the resulting commit to the pretty-print machinery,
which will die() upon failing to read the commit object
itself.
Since both cases are ancillary to the real operation being
performed, let's be more robust and keep going. This lets
users more easily checkout away from broken history.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some unchecked calls to parse_commit should obviously die on
error, because their next step is to start looking at the
parsed fields, which will cause a segfault. These are
obvious candidates for parse_commit_or_die, which will be a
strict improvement in behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous code was detecting the presence of "--" by looking only at
argument 1. As a result, "git checkout foo bar --" was interpreted as an
ambiguous file/revision list, and errored out with:
error: pathspec 'foo' did not match any file(s) known to git.
error: pathspec 'bar' did not match any file(s) known to git.
error: pathspec '--' did not match any file(s) known to git.
This patch fixes it by walking through the argument list to find the
"--", and now complains about the number of references given.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--" notation disambiguates files and branches, but as a side-effect
of the previous implementation, also disabled the branch auto-creation
when $branch does not exist.
A possible scenario is then:
git checkout $branch
=> fails if $branch is both a ref and a file, and suggests --
git checkout $branch --
=> refuses to create the $branch
This patch allows the second form to create $branch, and since the -- is
provided, it does not look for file named $branch.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "struct pathspec" interface in more places, instead of array of
characters, the latter of which cannot express magic pathspecs
(e.g. ":(icase)makefile" that matches both Makefile and makefile).
* nd/magic-pathspec:
add: lift the pathspec magic restriction on "add -p"
pathspec: catch prepending :(prefix) on pathspec with short magic
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
Since 480ca64 (convert run_add_interactive to use struct pathspec -
2013-07-14), we have unconditionally passed :(prefix)xxx to
add-interactive.perl. It implies that all commands
add-interactive.perl calls must be aware of pathspec magic, or
:(prefix) is barfed. The restriction to :/ only becomes unnecessary.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27). All occurrences of the respective variables have
been reviewed and none of them relied on the counting up mechanism,
but all of them were using the variable as a true boolean.
This patch does not change semantics of any command intentionally.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of b04ba2bb4 OPTION_BOOLEAN was deprecated.
This commit removes all occurrences of OPTION_BOOLEAN.
In b04ba2bb4 Junio suggested to replace it with either
OPTION_SET_INT or OPTION_COUNTUP instead. However a pattern, which
occurred often with the OPTION_BOOLEAN was a hidden boolean parameter.
So I defined OPT_HIDDEN_BOOL as an additional possible parse option
in parse-options.h to make life easy.
The OPT_HIDDEN_BOOL was used in checkout, clone, commit, show-ref.
The only exception, where there was need to fiddle with OPTION_SET_INT
was log and notes. However in these two files there is also a pattern,
so we could think of introducing OPT_NONEG_BOOL.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This passes the pathspec, more or less unmodified, to
git-add--interactive. The command itself does not process pathspec. It
simply passes the pathspec to other builtin commands. So if all those
commands support pathspec, we're good.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Invocations of "git checkout" used internally by "git rebase" were
counted as "checkout", and affected later "git checkout -" to the
the user to an unexpected place.
* rr/rebase-checkout-reflog:
checkout: respect GIT_REFLOG_ACTION
status: do not depend on rebase reflog messages
t/t2021-checkout-last: "checkout -" should work after a rebase finishes
wt-status: remove unused field in grab_1st_switch_cbdata
t7512: test "detached from" as well
I attempted to make index_state->cache[] a "const struct cache_entry **"
to find out how existing entries in index are modified and where. The
question I have is what do we do if we really need to keep track of on-disk
changes in the index. The result is
- diff-lib.c: setting CE_UPTODATE
- name-hash.c: setting CE_HASHED
- preload-index.c, read-cache.c, unpack-trees.c and
builtin/update-index: obvious
- entry.c: write_entry() may refresh the checked out entry via
fill_stat_cache_info(). This causes "non-const struct cache_entry
*" in builtin/apply.c, builtin/checkout-index.c and
builtin/checkout.c
- builtin/ls-files.c: --with-tree changes stagemask and may set
CE_UPDATE
Of these, write_entry() and its call sites are probably most
interesting because it modifies on-disk info. But this is stat info
and can be retrieved via refresh, at least for porcelain
commands. Other just uses ce_flags for local purposes.
So, keeping track of "dirty" entries is just a matter of setting a
flag in index modification functions exposed by read-cache.c. Except
unpack-trees, the rest of the code base does not do anything funny
behind read-cache's back.
The actual patch is less valueable than the summary above. But if
anyone wants to re-identify the above sites. Applying this patch, then
this:
diff --git a/cache.h b/cache.h
index 430d021..1692891 100644
--- a/cache.h
+++ b/cache.h
@@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode)
#define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1)
struct index_state {
- struct cache_entry **cache;
+ const struct cache_entry **cache;
unsigned int version;
unsigned int cache_nr, cache_alloc, cache_changed;
struct string_list *resolve_undo;
will help quickly identify them without bogus warnings.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/checkout-auto-tracking:
glossary: Update and rephrase the definition of a remote-tracking branch
branch.c: Validate tracking branches with refspecs instead of refs/remotes/*
t9114.2: Don't use --track option against "svn-remote"-tracking branches
t7201.24: Add refspec to keep --track working
t3200.39: tracking setup should fail if there is no matching refspec.
checkout: Use remote refspecs when DWIMming tracking branches
t2024: Show failure to use refspec when DWIMming remote branch names
t2024: Add tests verifying current DWIM behavior of 'git checkout <branch>'
remote_find_tracking() populates the query struct with an allocated
string in the dst member. So, we do not need to xstrdup() the string,
since we can transfer ownership from the query struct (which will go
out of scope at the end of this function) to our callback struct, but
we must free the string if it will not be used so we will not leak
memory.
Let's do so.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT_REFLOG_ACTION is an environment variable specifying the reflog
message to write after an action is completed. Several other commands
including merge, reset, and commit respect it.
Fix the failing tests in t/checkout-last by making checkout respect it
too. You can now expect
$ git checkout -
to work as expected after any operation that internally uses "checkout"
as its implementation detail, e.g. "rebase".
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "git checkout foo" that DWIMs the intended "upstream" and
turns it into "git checkout -t -b foo remotes/origin/foo" to
correctly take existing remote definitions into account.
The remote "origin" may be what uniquely map its own branch to
remotes/some/where/foo but that some/where may not be "origin".
* jh/checkout-auto-tracking:
glossary: Update and rephrase the definition of a remote-tracking branch
branch.c: Validate tracking branches with refspecs instead of refs/remotes/*
t9114.2: Don't use --track option against "svn-remote"-tracking branches
t7201.24: Add refspec to keep --track working
t3200.39: tracking setup should fail if there is no matching refspec.
checkout: Use remote refspecs when DWIMming tracking branches
t2024: Show failure to use refspec when DWIMming remote branch names
t2024: Add tests verifying current DWIM behavior of 'git checkout <branch>'
Make the initial "sparse" selection of the paths more sticky across
"git checkout".
* nd/checkout-keep-sparse:
checkout: add --ignore-skip-worktree-bits in sparse checkout mode
The DWIM mode of checkout allows you to run "git checkout foo" when there
is no existing local ref or path called "foo", and there is exactly _one_
remote with a remote-tracking branch called "foo". Git will automatically
create a new local branch called "foo" using the remote-tracking "foo" as
its starting point and configured upstream.
For example, consider the following unconventional (but perfectly valid)
remote setup:
[remote "origin"]
fetch = refs/heads/*:refs/remotes/origin/*
[remote "frotz"]
fetch = refs/heads/*:refs/remotes/frotz/nitfol/*
Case 1: Assume both "origin" and "frotz" have remote-tracking branches called
"foo", at "refs/remotes/origin/foo" and "refs/remotes/frotz/nitfol/foo"
respectively. In this case "git checkout foo" should fail, because there is
more than one remote with a "foo" branch.
Case 2: Assume only "frotz" have a remote-tracking branch called "foo". In
this case "git checkout foo" should succeed, and create a local branch "foo"
from "refs/remotes/frotz/nitfol/foo", using remote branch "foo" from "frotz"
as its upstream.
The current code hardcodes the assumption that all remote-tracking branches
must match the "refs/remotes/$remote/*" pattern (which is true for remotes
with "conventional" refspecs, but not true for the "frotz" remote above).
When running "git checkout foo", the current code looks for exactly one ref
matching "refs/remotes/*/foo", hence in the above example, it fails to find
"refs/remotes/frotz/nitfol/foo", which causes it to fail both case #1 and #2.
The better way to handle the above example is to actually study the fetch
refspecs to deduce the candidate remote-tracking branches for "foo"; i.e.
assume "foo" is a remote branch being fetched, and then map "refs/heads/foo"
through the refspecs in order to get the corresponding remote-tracking
branches "refs/remotes/origin/foo" and "refs/remotes/frotz/nitfol/foo".
Finally we check which of these happens to exist in the local repo, and
if there is exactly one, we have an unambiguous match for "git checkout foo",
and may proceed.
This fixes most of the failing tests introduced in the previous patch.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -- <paths>" is usually used to restore all modified
files in <paths>. In sparse checkout mode, this command is overloaded
with another meaning: to add back all files in <paths> that are
excluded by sparse patterns.
As the former makes more sense for day-to-day use. Switch it to the
default and the latter enabled with --ignore-skip-worktree-bits.
While at there, add info/sparse-checkout to gitrepository-layout.txt
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After printing the list of left-behind commits (with abbreviated
hashes), use an abbreviated hash in the suggested 'git branch' command;
there's no point in outputting a full 40-character hex string in some
friendly advice.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In checkout_paths() we do this
- for all updated items, call match_pathspec
- for all items, call match_pathspec (inside unmerge_cache)
- for all items, call match_pathspec (for showing "path .. is unmerged)
- for updated items, call match_pathspec and update paths
That's a lot of duplicate match_pathspec(s) and the function is not
exactly cheap to be called so many times, especially on large indexes.
This patch makes it call match_pathspec once per updated index entry,
save the result in ce_flags and reuse the results in the following
loops.
The changes in 0a1283b (checkout $tree $path: do not clobber local
changes in $path not in $tree - 2011-09-30) limit the affected paths
to ones we read from $tree. We do not do anything to other modified
entries in this case, so the "for all items" above could be modified
to "for all updated items". But..
The command's behavior now is modified slightly: unmerged entries that
match $path, but not updated by $tree, are now NOT touched. Although
this should be considered a bug fix, not a regression. A new test is
added for this change.
And while at there, free ps_matched after use.
The following command is tested on webkit, 215k entries. The pattern
is chosen mainly to make match_pathspec sweat:
git checkout -- "*[a-zA-Z]*[a-zA-Z]*[a-zA-Z]*"
before after
real 0m3.493s 0m2.737s
user 0m2.239s 0m1.586s
sys 0m1.252s 0m1.151s
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we switch to a new branch using checkout, we usually output a
message indicating what happened. However, when we switch from an unborn
branch to a new branch, we do not print anything, which may leave the
user wondering what happened.
The reason is that the unborn branch is a special case (see abe1998),
and does not follow the usual switch_branches code path. Let's add a
similar informational message to the special case to match the usual
code path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option parsing of "git checkout" had error checking, dwim and
defaulting missing options, all mixed in the code, and issuing an
appropriate error message with useful context was getting harder.
Reorganize the code and allow giving a proper diagnosis when the
user says "git checkout -b -t foo bar" (e.g. "-t" is not a good name
for a branch).
* nd/checkout-option-parsing-fix:
checkout: reorder option handling
checkout: move more parameters to struct checkout_opts
checkout: pass "struct checkout_opts *" as const pointer
checkout operates in three different modes. On top of that it tries to
be smart by guessing the branch name for switching. This results in
messy option handling code. This patch reorders it so that
- cmd_checkout() is responsible for parsing, preparing input and
determining mode
- Code of each mode is in checkout_paths() and checkout_branch(),
where sanity checks are performed
Another slight improvement is always print branch name (or commit
name) when printing errors related ot them. This helps catch the case
where an option is mistaken as branch/commit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Jeff King
Nguyễn Thái Ngọc Duy
Ronnie Sahlberg
Michael Haggerty
Justin Lebar
Benoit Pierre
Christian Couder
Matthieu Moy
Stefan Beller
Brandon Casey
Ramkumar Ramachandra
Johan Herland
Kevin Bracey