Граф коммитов

244 Коммитов

Автор SHA1 Сообщение Дата
Kevin Bracey 8ceb6fbd63 am: replace uses of --resolved with --continue
git am was previously modified to provide --continue for consistency
with rebase, merge etc, and the documentation changed to showing
--continue as the primary form.

Complete the work by replacing remaining uses of --resolved by
--continue, most notably in suggested command reminders.

Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-27 09:37:12 -07:00
Ramkumar Ramachandra b141f3c9d3 am: handle stray $dotest directory
The following bug has been observed:

  $ git am  # no input file
  ^C
  $ git am --abort
  Resolve operation not in progress, we are not resuming.

This happens because the following test fails:

  test -d "$dotest" && test -f "$dotest/last" && test -f "$dotest/next"

and the codepath for an "am in-progress" is not executed.  It falls back
to the codepath that treats this as a "fresh execution".  Before
rr/rebase-autostash, this condition was

  test -d "$dotest"

It would incorrectly execute the "normal" am --abort codepath:

  git read-tree --reset -u HEAD ORIG_HEAD
  git reset ORIG_HEAD

by incorrectly assuming that an am is "in progress" (i.e. ORIG_HEAD
etc. was written during the previous execution).

Notice that

  $ git am
  ^C

executes nothing of significance, is equivalent to

  $ mkdir .git/rebase-apply

Therefore, the correct solution is to treat .git/rebase-apply as a
"stray directory" and remove it on --abort in the fresh-execution
codepath.  Also ensure that we're not called with --rebasing from
git-rebase--am.sh; in that case, it is the responsibility of the caller
to handle and stray directories.

While at it, tell the user to run "git am --abort" to get rid of the
stray $dotest directory, if she attempts anything else.

Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-17 08:59:48 -07:00
Ramkumar Ramachandra a1549e1049 am: return control to caller, for housekeeping
We only need to do these two tasks

    git gc --auto
    rm -fr "$dotest"

ourselves if the script was invoked as a standalone program; when
invoked with --rebasing (from git-rebase--am.sh), cascade control back
to the ultimate caller git-rebase.sh to do this for us.

Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-12 23:20:07 -07:00
Ramkumar Ramachandra c30754f188 am: tighten a conditional that checks for $dotest
In preparation for a later patch that creates $dotest/autostash in
git-rebase.sh before anything else happens, don't assume that the
presence of a $dotest directory implies the existence of the
$dotest/next and $dotest/last files.  Look for them explicitly.

Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-12 23:20:07 -07:00
Simon Ruderich b34a912989 git-am: show the final log message on "Applying:" indicator
The "Applying:" message "git am" shows to tell the user which patch
is being applied has traditionally been to help identifying the
input, but we started showing the edited result since f23272f3fd
(git-am -i: report rewritten title, 2007-12-04), because it was
found more confusing to show the original during an interactive
session.

Treat the modification by the applypatch-msg hook in a similar way
and use the edited result in the progress indication, even though
this is usually not interactive.

Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-21 08:09:35 -07:00
Junio C Hamano 6d81ce0543 Merge branch 'jc/fake-ancestor-with-non-blobs'
Rebasing the history of superproject with change in the submodule
was broken since v1.7.12.

* jc/fake-ancestor-with-non-blobs:
  apply: diagnose incomplete submodule object name better
  apply: simplify build_fake_ancestor()
  git-am: record full index line in the patch used while rebasing
2013-02-05 16:13:12 -08:00
Junio C Hamano 4ae6d4699f git-am: record full index line in the patch used while rebasing
Earlier, a230949 (am --rebasing: get patch body from commit, not
from mailbox, 2012-06-26) learned to regenerate patch body from the
commit object while rebasing, instead of reading from the rebase-am
front-end.  While doing so, it used "git diff-tree" but without
giving it the "--full-index" option.

This does not matter for in-repository objects; during rebasing, any
abbreviated object name should uniquely identify them.

But we may be rebasing a commit that contains a change to a gitlink,
in which case we usually should not have the object (it names a
commit in the submodule).  A full object name is necessary to later
reconstruct a fake ancestor index for them.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-31 20:30:55 -08:00
Junio C Hamano 738b314a3e Merge branch 'dl/am-hg-locale'
Datestamp recorded in "Hg" format patch was reformatted incorrectly
to an e-mail looking date using locale dependant strftime, causing
patch application to fail.

* dl/am-hg-locale:
  am: invoke perl's strftime in C locale
2013-01-28 10:59:24 -08:00
Dmitry V. Levin 5185b9707a am: invoke perl's strftime in C locale
We used to convert timestamps in metadata comment of Hg patch to
mbox-looking Date: field using strftime, without making sure the
resulting string is not translated.  Always use C locale for this.

Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-18 12:37:39 -08:00
Junio C Hamano e245397434 Merge branch 'nd/am-i18n-fix'
"git am" wasn't marked up for i18n properly.

* nd/am-i18n-fix:
  am: quote string for translation before passing to eval_gettextln
2012-09-07 11:09:04 -07:00
Nguyễn Thái Ngọc Duy a312a271b9 am: quote string for translation before passing to eval_gettextln
If it's not quoted, the string is expanded before it gets looked up in
gettext database and obviously nothing is returned.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-22 09:59:52 -07:00
Junio C Hamano 5fe1484a9b Merge branch 'jx/i18n-1.7.11'
Add i18n support for scripted Porcelains, and mark strings in
merge(-recursive), am, and rebase for i18n.

* jx/i18n-1.7.11:
  i18n: merge-recursive: mark strings for translation
  Remove dead code which contains bad gettext block
  i18n: am: mark more strings for translation
  rebase: remove obsolete and unused LONG_USAGE which breaks xgettext
  i18n: Rewrite gettext messages start with dash
  i18n: rebase: mark messages for translation
  i18n: New keywords for xgettext extraction from sh
2012-07-31 09:41:52 -07:00
Jiang Xin 31023e0a9f Remove dead code which contains bad gettext block
Found this dead code when I examine gettext messages in shell scripts
start with dash ('-' or '--'). An error will be raised for this case,
like:

    $ gettext "-d option is no longer supported.  Do not use."
    gettext: missing arguments

Indead, this code has been left as dead for a long time, as Jonathan
points out:

    The git am -d/--dotest option has errored out with a message
    since e72c7406 (am: remove support for -d .dotest, 2008-03-04).
    The error message about lack of support was eliminated along
    with other cleanups (probably by mistake) a year later by
    removing the option from the option table in 98ef23b3 (git-am:
    minor cleanups, 2009-01-28).

    But the code to handle -d and --dotest stayed around even though
    ever since then it could not be tripped.  Remove this dead code.

Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-26 22:34:15 -07:00
Jiang Xin 42e6504f5e i18n: am: mark more strings for translation
Mark strings in 'git-am.sh' for translation. In the last chunk,
change '$1' to '-b/--binary', as it is not worth turning this
message to "The %s option has been..." and using printf on it.

Also reduce one indentation level for one gettextln clause introduced
in commit de88c1c.

Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-26 22:34:15 -07:00
Jiang Xin c7108bf9ed i18n: rebase: mark messages for translation
Mark messages in git-rebase.sh for translation.  While doing this
Jonathan noticed that the comma usage and sentence structure of the
resolvemsg was not quite right, so correct that and its cousins in
git-am.sh and t/t0201-gettext-fallbacks.sh at the same time.

Some tests would start to fail with GETTEXT_POISON turned on after
this update.  Use test_i18ncmp and test_i18ngrep where appropriate
to mark strings that should only be checked in the C locale output
to avoid such issues.

Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-25 10:09:14 -07:00
Junio C Hamano 80ee1e0469 Merge branch 'pg/maint-1.7.9-am-where-is-patch'
When "git am" failed, old timers knew to check .git/rebase-apply/patch
to see what went wrong, but we never told the users about it.

* pg/maint-1.7.9-am-where-is-patch:
  am: indicate where a failed patch is to be found
2012-07-22 12:56:02 -07:00
Paul Gortmaker 14bf2d58bc am: indicate where a failed patch is to be found
If "git am" fails to apply something, the end user may need to know
where to find the patch that failed to apply, so that the user can
do other things (e.g. trying "GNU patch" on it, running "diffstat"
to see what it tried to change, etc.)  The input to "am" may have
contained more than one patch, or the message may have been MIME
encoded, and knowing what the user fed to "am" does not help very
much for this purpose.

Also introduce advice.amworkdir configuration to allow people who
learned where to look to squelch this message.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-13 16:02:48 -07:00
Martin von Zweigbergk 0fbb95dc83 am: don't call mailinfo if $rebasing
Since 5e835ca (rebase: do not munge commit log message, 2008-04-16),
'git am --rebasing' no longer gets the commit log message from the
patch, but reads it from the commit identified by the "From " header
line. From 43c2325 (am: use get_author_ident_from_commit instead of
mailinfo when rebasing, 2010-06-16), it also gets the author name,
email and date from the commit. Now that the final part of the patch
-- the patch body itself -- is also read from the commit, there is no
longer a need to call 'git mailinfo' to extract any of these parts
while --rebasing.

Sugested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-26 13:17:57 -07:00
Martin von Zweigbergk a230949409 am --rebasing: get patch body from commit, not from mailbox
Rebasing a commit that contains a diff in the commit message results
in a failure with output such as

  First, rewinding head to replay your work on top of it...
  Applying: My cool patch.
  fatal: sha1 information is lacking or useless
  (app/controllers/settings_controller.rb).
  Repository lacks necessary blobs to fall back on 3-way merge.
  Cannot fall back to three-way merge.
  Patch failed at 0001 My cool patch.

The reason is that 'git rebase' without -p/-i/-m internally calls 'git
format-patch' and pipes the output to 'git am --rebasing', which has
no way of knowing what is a real patch and what is a commit message
that contains a patch.

Make 'git am' while in --rebasing mode get the patch body from the
commit object instead of extracting it from the mailbox.

Patch by Junio, test case and commit log message by Martin.

Reported-by: anikey <arty.anikey@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-26 13:17:56 -07:00
Junio C Hamano bb52e7f600 Merge branch 'jc/am-report-3way'
When "git am -3" needs to fall back to an application to a synthesized
preimage followed by a 3-way merge, the paths that needed such treatment
are now reported to the end user, so that the result in them can be
eyeballed with extra care.

* jc/am-report-3way:
  am -3: list the paths that needed 3-way fallback
2012-04-20 15:49:37 -07:00
Junio C Hamano 334dde8532 Merge branch 'jb/am-include'
"git am" learned the "--include" option, which is an opposite of existing
the "--exclude" option.

By Johannes Berg
* jb/am-include:
  am: support --include option
2012-04-20 15:49:16 -07:00
Johannes Berg 58725efd4a am: support --include option
am supports a number of pass-through options
to apply, like --exclude and --directory. Add
--include to this list.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-28 10:44:55 -07:00
Junio C Hamano 5d86861c92 am -3: list the paths that needed 3-way fallback
When applying a patch that was based on an older release with "am -3", I
often wonder changes to which files need to be reviewed with extra care to
spot mismerges, but there is no good indication.

The paths that needed 3-way fallback can easily be obtained by comparing
the synthesized (partial) base tree and the current HEAD and noticing only
additions and modifications (removals only show the sparseness of the fake
ancestor tree, which is not useful information at all).  List them in the
usual --name-status format.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-28 10:20:33 -07:00
Junio C Hamano 6c15a1c636 am: officially deprecate -b/--binary option
We have had these options as harmless no-op for more than 3 years without
officially deprecating them.  Let's announce the deprecation and start
warning against their use, but without failing the command just not yet,
so that we can later repurpose the option if we want to in the future.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-13 12:21:04 -07:00
Junio C Hamano b91a13bbdc Merge branch 'jc/am-3-nonstandard-popt' into maint
The code to synthesize the fake ancestor tree used by 3-way merge
fallback in "git am" was not prepared to read a patch created with
a non-standard -p<num> value.

* jc/am-3-nonstandard-popt:
  test: "am -3" can accept non-standard -p<num>
  am -3: allow nonstandard -p<num> option
2012-03-12 15:43:15 -07:00
Thomas Rast 4eeb1de1c3 git-am: error out when seeing -b/--binary
The --binary option to git-apply has been a no-op since 2b6eef9 (Make
apply --binary a no-op., 2006-09-06) and was deprecated in cb3a160
(git-am: ignore --binary option, 2008-08-09).

We could remove it outright, but let's be nice to people who still
have scripts saying 'git am -b' (if they exist) and tell them the
reason for the sudden failure.

Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-12 14:57:37 -07:00
Junio C Hamano 250f0a074a Merge branch 'jc/am-3-nonstandard-popt'
* jc/am-3-nonstandard-popt:
  test: "am -3" can accept non-standard -p<num>
  am -3: allow nonstandard -p<num> option
2012-03-04 23:35:12 -08:00
Junio C Hamano 8080906245 Merge branch 'maint'
* maint:
  Document accumulated fixes since 1.7.9.2
  Git 1.7.8.5
  grep -P: Fix matching ^ and $
  am: don't infloop for an empty input file
  rebase -m: only call "notes copy" when rewritten exists and is non-empty
  git-p4: remove bash-ism in t9800
  git-p4: remove bash-ism in t9809
  git-p4: fix submit regression with clientSpec and subdir clone
  git-p4: set useClientSpec variable on initial clone
  Makefile: add thread-utils.h to LIB_H

Conflicts:
	RelNotes
	t/t9809-git-p4-client-view.sh
2012-02-26 17:39:04 -08:00
Jim Meyering f0c5793b37 am: don't infloop for an empty input file
git-am.sh's check_patch_format function would attempt to preview
the patch to guess its format, but would go into an infinite loop
when the patch file happened to be empty.  The solution: exit the
loop when "read" fails, not when the line var, "$l1" becomes empty.

Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-26 16:32:54 -08:00
Junio C Hamano 4056afbcf2 am -3: allow nonstandard -p<num> option
When falling back to 3-way merge, we run "git apply" to synthesize the
fake ancestor tree by parsing the incoming patch, and another "git apply"
to apply the patch to the fake ancestor tree.  Both invocation need to
be aware of the custom -p<num> setting to parse patches that were prepared
with non-standard src/dst prefix.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-22 21:55:06 -08:00
Junio C Hamano bff64a9cda Merge branch 'tr/maint-mailinfo'
* tr/maint-mailinfo:
  mailinfo: with -b, keep space after [foo]
  am: learn passing -b to mailinfo

Conflicts:
	git-am.sh
2012-01-29 13:18:53 -08:00
Thomas Rast f7e5ea171b am: learn passing -b to mailinfo
git-am could pass -k to mailinfo, but not -b.  Introduce an option
that does so.  We change the meaning of the 'keep' state file, but are
careful not to cause a problem unless you downgrade in the middle of
an 'am' run.

This uncovers a bug in mailinfo -b, hence the failing test.

Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-16 16:04:52 -08:00
Junio C Hamano 10dd3b2bf1 Merge branch 'maint-1.7.7' into maint
* maint-1.7.7:
  am: don't persist keepcr flag
  mingw: give waitpid the correct signature
  git symbolic-ref: documentation fix
2011-12-09 13:33:39 -08:00
Martin von Zweigbergk 7919704254 am: don't persist keepcr flag
The keepcr flag is only used in the split_patches function, which is
only called before a patch application has to stopped for user input,
not after resuming. It is therefore unnecessary to persist the
flag. This seems to have been the case since it was introduced in
ad2c928 (git-am: Add command line parameter `--keep-cr` passing it to
git-mailsplit, 2010-02-27).

Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-09 10:49:43 -08:00
Junio C Hamano 79814585b7 Merge branch 'gb/am-hg-patch'
* gb/am-hg-patch:
  am: preliminary support for hg patches
2011-10-05 12:36:17 -07:00
Junio C Hamano fee6bc5f03 Merge branch 'gb/maint-am-stgit-author-to-from-fix'
* gb/maint-am-stgit-author-to-from-fix:
  am: fix stgit patch mangling
2011-09-02 13:18:11 -07:00
Junio C Hamano e7734c6c9b Merge branch 'gb/maint-am-patch-format-error-message'
* gb/maint-am-patch-format-error-message:
  am: format is in $patch_format, not parse_patch

Conflicts:
	git-am.sh
2011-09-02 13:18:07 -07:00
Giuseppe Bilotta 0cfd112032 am: preliminary support for hg patches
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-29 10:21:17 -07:00
Giuseppe Bilotta 45d51dc969 am: fix stgit patch mangling
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-29 09:51:44 -07:00
Giuseppe Bilotta dff4b0ef30 am: format is in $patch_format, not parse_patch
The error message given when the patch format was not recognized was
wrong, since the variable checked was $parse_patch rather than
$patch_format. Fix by checking the non-emptyness of the correct
variable.

Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-29 09:07:54 -07:00
Junio C Hamano 957450054c Merge branch 'js/i18n-scripts'
* js/i18n-scripts:
  submodule: take advantage of gettextln and eval_gettextln.
  stash: take advantage of eval_gettextln
  pull: take advantage of eval_gettextln
  git-am: take advantage of gettextln and eval_gettextln.
  gettext: add gettextln, eval_gettextln to encode common idiom
2011-08-25 16:00:16 -07:00
Junio C Hamano beace29a04 Merge branch 'db/am-skip-blank-at-the-beginning'
* db/am-skip-blank-at-the-beginning:
  am: ignore leading whitespace before patch
2011-08-18 22:07:57 -07:00
Junio C Hamano d8308c79fc Merge branch 'ma/am-exclude'
* ma/am-exclude:
  am: Document new --exclude=<path> option
  am: pass exclude down to apply
2011-08-18 22:07:54 -07:00
Junio C Hamano 50b68aeb39 Merge branch 'maint'
* maint:
  Prepare for 1.7.6.1
  am: refresh the index at start and --resolved

Conflicts:
	GIT-VERSION-GEN
	RelNotes
2011-08-16 14:22:26 -07:00
Jeff King 2a6f08ac1f am: refresh the index at start and --resolved
If a file is unchanged but stat-dirty, we may erroneously
fail to apply patches, thinking that they conflict with a
dirty working tree.

This patch adds a call to "update-index --refresh". It comes
as late as possible, so that we don't bother with it for
thinks like "git rebase --abort", or when mbox-splitting
fails. However, it does come before we actually start
applying patches, meaning we will only call it once when we
start applying patches (or any time we return to "am" after
having resolved conflicts), and not once per patch.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-16 11:15:41 -07:00
David Barr 0e8341f29d am: ignore leading whitespace before patch
Some web-based email clients prepend whitespace to raw message
transcripts to workaround content-sniffing in some browsers.  Adjust
the patch format detection logic to ignore leading whitespace.

So now you can apply patches from GMail with "git am" in three steps:

 1. choose "show original"
 2. tell the browser to "save as" (for example by pressing Ctrl+S)
 3. run "git am" on the saved file

This fixes a regression introduced by v1.6.4-rc0~15^2~2 (git-am
foreign patch support: autodetect some patch formats, 2009-05-27).
GMail support was first introduced to "git am" by v1.5.4-rc0~274^2
(Make mailsplit and mailinfo strip whitespace from the start of the
input, 2007-11-01).

Signed-off-by: David Barr <davidbarr@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-11 13:01:18 -07:00
Jon Seymour de88c1ceda git-am: take advantage of gettextln and eval_gettextln.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-08 12:04:21 -07:00
maximilian attems 77e9e496a1 am: pass exclude down to apply
This allows to pass patches around from repositories,
where the other repository doesn't feature certain files.

In the special case this works for dash git sync to klibc dash:
 git am --directory="usr/dash" --exclude="usr/dash/configure.ac" \
        --exclude="usr/dash/ChangeLog" --exclude="usr/dash/dash.1" \
	.. -i -s -k ../dash/000X-foo.patch

Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-03 11:21:46 -07:00
Ævar Arnfjörð Bjarmason 39dc30dc1b i18n: git-am printf(1) message to eval_gettext
Convert a message that used printf(1) format to use eval_gettext. It's
easier for translators to handle the latter, since the eval format
automatically gives them context via variable names.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-21 11:57:15 -07:00
Ævar Arnfjörð Bjarmason dff1a98350 i18n: git-am core say messages
Make the core git-am messages that use say() translatable. These are
visible on almost every git am invocation.

There are tests that depend on the "Applying" output that need to be
changed to use the test_i18* functions along with this translation.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-21 11:57:14 -07:00