Граф коммитов

27 Коммитов

Автор SHA1 Сообщение Дата
Nicolas Vigier 51ba8ce372 git-sh-setup.sh: add variable to use the stuck-long mode
If the variable $OPTIONS_STUCKLONG is not empty, then rev-parse
option parsing is done in --stuck-long mode.

Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-03 12:11:10 -08:00
Stefano Lattarini 41ccfdd9c9 Correct common spelling mistakes in comments and tests
Most of these were found using Lucas De Marchi's codespell tool.

Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-12 13:38:40 -07:00
Gerrit Pape 6ab149ea89 git-quiltimport: preserve standard input to be able to read user input
When run without --author and it fails to determine an author, git
quiltimport tries `read patch_author` to get user input, but standard
input has been redirected to the patch series file.  This commit lets
quiltimport read the series file through file descriptor 3 so that the
standard input is preserved.

Reported by Uwe Kleine-König through http://bugs.debian.org/515910

Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-25 00:49:13 -08:00
Johannes Schindelin 51ef1daa4a Rename .git/rebase to .git/rebase-apply
With git-am, it sounds awkward to have the patches in ".git/rebase/",
but for technical reasons, we have to keep the same directory name
for git-am and git-rebase. ".git/rebase-apply" seems to be a good
compromise.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-21 18:51:47 -07:00
Junio C Hamano 588c038ac6 Merge branch 'sb/dashless'
* sb/dashless:
  Make usage strings dash-less
  t/: Use "test_must_fail git" instead of "! git"
  t/test-lib.sh: exit with small negagive int is ok with test_must_fail

Conflicts:
	builtin-blame.c
	builtin-mailinfo.c
	builtin-mailsplit.c
	builtin-shortlog.c
	git-am.sh
	t/t4150-am.sh
	t/t4200-rerere.sh
2008-07-16 17:22:50 -07:00
Johannes Schindelin 28ed6e7b32 Rename ".dotest/" to ".git/rebase" and ".dotest-merge" to "rebase-merge"
Since the files generated and used during a rebase are never to be
tracked, they should live in $GIT_DIR.  While at it, avoid the rather
meaningless term "dotest" to "rebase", and unhide ".dotest-merge".

This was wished for on the mailing list, but so far unimplemented.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-15 18:49:28 -07:00
Stephan Beyer 1b1dd23f2d Make usage strings dash-less
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form.  So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.

This patch makes git commands show the dash-less version.

For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.

Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13 14:12:48 -07:00
Junio C Hamano 18d077c1bf quiltimport: fix misquoting of parsed -p<num> parameter
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-12 21:07:19 -07:00
Pierre Habouzit 9dd5bded1b git-quiltimport: better parser to grok "enhanced" series files.
The previous parser wasn't able to grok:

 * empty lines;
 * annotated patch levels (trailing -pNNN annotations);
 * trailing comments.

Now it understands them and uses the patch level hints as a git apply
argument.

Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-09 23:45:12 -07:00
Johannes Schindelin 3addc94aff Replace instances of export VAR=VAL with VAR=VAL; export VAR
It might be POSIX, but there are shells that do not like the
expression 'export VAR=VAL'.  To be on the safe side, rewrite them
into 'VAR=VAL' and 'export VAR'.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-28 17:23:18 -08:00
Andy Whitcroft 9e384b4589 git-quiltimport.sh fix --patches handling
When converting git-quiltimport.sh to the new git-rev-part --parseopt
system, the handling of --patches was broken.  We inadvertantly always
attempt to use '--patches' as the value.

This was introduced in the following commit:

    commit e01fbf1a8f
    Author: Pierre Habouzit <madcoder@debian.org>
    Date:   Sun Nov 4 11:31:01 2007 +0100

        Migrate git-quiltimport.sh to use git-rev-parse --parseopt

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-12 18:34:19 -08:00
Pierre Habouzit e01fbf1a8f Migrate git-quiltimport.sh to use git-rev-parse --parseopt
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-05 22:48:13 -08:00
Dan Nicholson 9f569fe58f quiltimport: Skip non-existent patches
When quiltimport encounters a non-existent patch in the series file,
just skip to the next patch. This matches the behavior of quilt.

Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-27 16:19:19 -07:00
David Kastrup 822f7c7349 Supplant the "while case ... break ;; esac" idiom
A lot of shell scripts contained stuff starting with

	while case "$#" in 0) break ;; esac

and similar.  I consider breaking out of the condition instead of the
body od the loop ugly, and the implied "true" value of the
non-matching case is not really obvious to humans at first glance.  It
happens not to be obvious to some BSD shells, either, but that's
because they are not POSIX-compliant.  In most cases, this has been
replaced by a straight condition using "test".  "case" has the
advantage of being faster than "test" on vintage shells where "test"
is not a builtin.  Since none of them is likely to run the git
scripts, anyway, the added readability should be worth the change.

A few loops have had their termination condition expressed
differently.

Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-23 16:12:00 -07:00
Josh Triplett 9d6f220cc8 Remove useless uses of cat, and replace with filename arguments
Replace uses of cat that do nothing but writing the contents of
a single file to another command via pipe.

[jc: Original patch from Josh was somewhat buggy and rewrote
"cat $file | wc -l" to "wc -l $file", but this one should be Ok.]

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-14 01:07:44 -07:00
Junio C Hamano 5be60078c9 Rewrite "git-frotz" to "git frotz"
This uses the remove-dashes target to replace "git-frotz" to "git frotz".

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02 22:52:14 -07:00
Junio C Hamano 7d4f4a2f0d applymbox & quiltimport: typofix.
6777c380 fixed only one of three typos introduced in an earlier
patch 87ab7992.  This fixes the other two.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-24 14:27:41 -07:00
Linus Torvalds 1fa9bf362a git-quiltimport complaining yet still working
There were two bugs: "stop_here" doesn't exist, but the bug that causes
this code to trigger in the *first* place is the wrong use of "$dotest".
It should be ".dotest"

This is essentially the same bug introduced by 87ab7992, one was
fixed with 0d38ab25 but this was somehow left behind.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-14 03:39:36 -07:00
Francis Daly b275a0c9e7 git-quiltimport /bin/sh-ism fix
Bryan Wu reported
/usr/local/bin/git-quiltimport: 114: Syntax error: Missing '))'

Most bourne-ish shells I have here accept
 x=$((echo x)|cat)
but all bourne-ish shells I have here accept
 x=$( (echo x)|cat)
because $(( might mean arithmetic expansion.

Signed-off-by: Francis Daly <francis@daoine.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-29 23:11:33 -07:00
Don Zickus 87ab799234 builtin-mailinfo.c infrastrcture changes
I am working on a project that required parsing through regular
mboxes that didn't necessarily have patches embedded in them.  I
started by creating my own modified copy of git-am and working
from there.  Very quickly, I noticed git-mailinfo wasn't able to
handle a big chunk of my email.

After hacking up numerous solutions and running into more
limitations, I decided it was just easier to rewrite a big chunk
of it.  The following patch has a bunch of fixes and features
that I needed in order for me do what I wanted.

Note: I'm didn't follow any email rfc papers but I don't think
any of the changes I did required much knowledge (besides the
boundary stuff).

List of major changes/fixes:
- can't create empty patch files fix
- empty patch files don't fail, this failure will come inside git-am
- multipart boundaries are now handled
- only output inbody headers if a patch exists otherwise assume those
headers are part of the reply and instead output the original headers
- decode and filter base64 patches correctly
- various other accidental fixes

I believe I didn't break any existing functionality or
compatibility (other than what I describe above, which is really
only the empty patch file).

I tested this through various mailing list archives and
everything seemed to parse correctly (a couple thousand emails).

[jc: squashed in another patch from Don's five patch series to
 fix the test case, as this patch exposes the bug in the test.]

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-12 23:33:41 -07:00
Pavel Roskin 3dff5379bf Assorted typo fixes
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-03 21:49:54 -08:00
Jason Riedy 2aad957a51 Replace "echo -n" with printf in shell scripts.
Not all echos know -n.  This was causing a test failure in
t5401-update-hooks.sh, but not t3800-mktag.sh for some reason.

Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-15 22:23:21 -08:00
Shawn Pearce 09a28eccce Log ref changes made by quiltimport.
When importing a quilt patch to a branch which has a reflog record
the update to HEAD with a log message indicating the change was
made by quiltimport and what patch caused the change.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-11 14:16:53 -07:00
Pavel Roskin 82e5a82fd7 Fix more typos, primarily in the code
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-10 00:36:44 -07:00
Dennis Stosberg 8096fae726 Fix expr usage for FreeBSD
Some implementations of "expr" (e.g. FreeBSD's) fail, if an
argument starts with a dash.

Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-27 10:56:05 -07:00
Eric W. Biederman d3bd4ee1a5 Implement a --dry-run option to git-quiltimport
Since large quilt trees like -mm can easily have patches
without clear authorship information, add a --dry-run
option to make the problem patches easy to find.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-18 22:55:57 -07:00
Eric W. Biederman d3d8f361a8 Implement git-quiltimport
Importing a quilt patch series into git is not very difficult
but parsing the patch descriptions and all of the other
minutia take a bit of effort to get right, so this automates it.

Since git and quilt complement each other it makes sense
to make it easy to go back and forth between the two.

If a patch is encountered that it cannot derive the author
from the user is asked.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-18 22:55:57 -07:00