The function read_oneliner() is a generally useful util function.
Instead of hiding it as a static function within sequencer.c, extern it
so that it can be reused by others.
This patch is best viewed with --color-moved.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" has learned to use the merge backend (i.e. the
machinery that drives "rebase -i") by default, while allowing
"--apply" option to use the "apply" backend (e.g. the moral
equivalent of "format-patch piped to am"). The rebase.backend
configuration variable can be set to customize.
* en/rebase-backend:
rebase: rename the two primary rebase backends
rebase: change the default backend from "am" to "merge"
rebase: make the backend configurable via config setting
rebase tests: repeat some tests using the merge backend instead of am
rebase tests: mark tests specific to the am-backend with --am
rebase: drop '-i' from the reflog for interactive-based rebases
git-prompt: change the prompt for interactive-based rebases
rebase: add an --am option
rebase: move incompatibility checks between backend options a bit earlier
git-rebase.txt: add more details about behavioral differences of backends
rebase: allow more types of rebases to fast-forward
t3432: make these tests work with either am or merge backends
rebase: fix handling of restrict_revision
rebase: make sure to pass along the quiet flag to the sequencer
rebase, sequencer: remove the broken GIT_QUIET handling
t3406: simplify an already simple test
rebase (interactive-backend): fix handling of commits that become empty
rebase (interactive-backend): make --keep-empty the default
t3404: directly test the behavior of interest
git-rebase.txt: update description of --allow-empty-message
As established in the previous commit and commit b00bf1c9a8
(git-rebase: make --allow-empty-message the default, 2018-06-27), the
behavior for rebase with different backends in various edge or corner
cases is often more happenstance than design. This commit addresses
another such corner case: commits which "become empty".
A careful reader may note that there are two types of commits which would
become empty due to a rebase:
* [clean cherry-pick] Commits which are clean cherry-picks of upstream
commits, as determined by `git log --cherry-mark ...`. Re-applying
these commits would result in an empty set of changes and a
duplicative commit message; i.e. these are commits that have
"already been applied" upstream.
* [become empty] Commits which are not empty to start, are not clean
cherry-picks of upstream commits, but which still become empty after
being rebased. This happens e.g. when a commit has changes which
are a strict subset of the changes in an upstream commit, or when
the changes of a commit can be found spread across or among several
upstream commits.
Clearly, in both cases the changes in the commit in question are found
upstream already, but the commit message may not be in the latter case.
When cherry-mark can determine a commit is already upstream, then
because of how cherry-mark works this means the upstream commit message
was about the *exact* same set of changes. Thus, the commit messages
can be assumed to be fully interchangeable (and are in fact likely to be
completely identical). As such, the clean cherry-pick case represents a
case when there is no information to be gained by keeping the extra
commit around. All rebase types have always dropped these commits, and
no one to my knowledge has ever requested that we do otherwise.
For many of the become empty cases (and likely even most), we will also
be able to drop the commit without loss of information -- but this isn't
quite always the case. Since these commits represent cases that were
not clean cherry-picks, there is no upstream commit message explaining
the same set of changes. Projects with good commit message hygiene will
likely have the explanation from our commit message contained within or
spread among the relevant upstream commits, but not all projects run
that way. As such, the commit message of the commit being rebased may
have reasoning that suggests additional changes that should be made to
adapt to the new base, or it may have information that someone wants to
add as a note to another commit, or perhaps someone even wants to create
an empty commit with the commit message as-is.
Junio commented on the "become-empty" types of commits as follows[1]:
WRT a change that ends up being empty (as opposed to a change that
is empty from the beginning), I'd think that the current behaviour
is desireable one. "am" based rebase is solely to transplant an
existing history and want to stop much less than "interactive" one
whose purpose is to polish a series before making it publishable,
and asking for confirmation ("this has become empty--do you want to
drop it?") is more appropriate from the workflow point of view.
[1] https://lore.kernel.org/git/xmqqfu1fswdh.fsf@gitster-ct.c.googlers.com/
I would simply add that his arguments for "am"-based rebases actually
apply to all non-explicitly-interactive rebases. Also, since we are
stating that different cases should have different defaults, it may be
worth providing a flag to allow users to select which behavior they want
for these commits.
Introduce a new command line flag for selecting the desired behavior:
--empty={drop,keep,ask}
with the definitions:
drop: drop commits which become empty
keep: keep commits which become empty
ask: provide the user a chance to interact and pick what to do with
commits which become empty on a case-by-case basis
In line with Junio's suggestion, if the --empty flag is not specified,
pick defaults as follows:
explicitly interactive: ask
otherwise: drop
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Different rebase backends have different treatment for commits which
start empty (i.e. have no changes relative to their parent), and the
--keep-empty option was added at some point to allow adjusting behavior.
The handling of commits which start empty is actually quite similar to
commit b00bf1c9a8 (git-rebase: make --allow-empty-message the default,
2018-06-27), which pointed out that the behavior for various backends is
often more happenstance than design. The specific change made in that
commit is actually quite relevant as well and much of the logic there
directly applies here.
It makes a lot of sense in 'git commit' to error out on the creation of
empty commits, unless an override flag is provided. However, once
someone determines that there is a rare case that merits using the
manual override to create such a commit, it is somewhere between
annoying and harmful to have to take extra steps to keep such
intentional commits around. Granted, empty commits are quite rare,
which is why handling of them doesn't get considered much and folks tend
to defer to existing (accidental) behavior and assume there was a reason
for it, leading them to just add flags (--keep-empty in this case) that
allow them to override the bad defaults. Fix the interactive backend so
that --keep-empty is the default, much like we did with
--allow-empty-message. The am backend should also be fixed to have
--keep-empty semantics for commits that start empty, but that is not
included in this patch other than a testcase documenting the failure.
Note that there was one test in t3421 which appears to have been written
expecting --keep-empty to not be the default as correct behavior. This
test was introduced in commit 00b8be5a4d ("add tests for rebasing of
empty commits", 2013-06-06), which was part of a series focusing on
rebase topology and which had an interesting original cover letter at
https://lore.kernel.org/git/1347949878-12578-1-git-send-email-martinvonz@gmail.com/
which noted
Your input especially appreciated on whether you agree with the
intent of the test cases.
and then went into a long example about how one of the many tests added
had several questions about whether it was correct. As such, I believe
most the tests in that series were about testing rebase topology with as
many different flags as possible and were not trying to state in general
how those flags should behave otherwise.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the rebase.missingCommitsCheck configuration to kick in when
"rebase --edit-todo" and "rebase --continue" restarts the procedure.
* ag/edit-todo-drop-check:
rebase-interactive: warn if commit is dropped with `rebase --edit-todo'
sequencer: move check_todo_list_from_file() to rebase-interactive.c
"git rebase -i" (and friends) used to unnecessarily check out the
tip of the branch to be rebased, which has been corrected.
* ag/rebase-avoid-unneeded-checkout:
rebase -i: stop checking out the tip of the branch to rebase
When set to "warn" or "error", `rebase.missingCommitsCheck' would make
`rebase -i' warn if the user removed commits from the todo list to
prevent mistakes. Unfortunately, `rebase --edit-todo' and `rebase
--continue' don't take it into account.
This adds the ability for `rebase --edit-todo' and `rebase --continue'
to check if commits were dropped by the user. As both edit_todo_list()
and complete_action() parse the todo list and check for dropped commits,
the code doing so in the latter is removed to reduce duplication.
`edit_todo_list_advice' is removed from sequencer.c as it is no longer
used there.
This changes when a backup of the todo list is made. Until now, it was
saved only once, before the initial edit. Now, it is also made if the
original todo list has no errors or no dropped commits. Thus, the
backup should be error-free. Without this, sequencer_continue()
(`rebase --continue') could only compare the current todo list against
the original, unedited list. Before this change, this file was only
used by edit_todo_list() and `rebase -p' to create the backup before
the initial edit, and check_todo_list_from_file(), only used by
`rebase -p' to check for dropped commits after its own initial edit.
If the edited list has an error, a file, `dropped', is created to
report the issue. Otherwise, it is deleted. Usually, the edited list
is compared against the list before editing, but if this file exists,
it will be compared to the backup. Also, if the file exists,
sequencer_continue() checks the list for dropped commits. If the
check was performed every time, it would fail when resuming a rebase
after resolving a conflict, as the backup will contain commits that
were picked, but they will not be in the new list. It's safe to
ignore this check if `dropped' does not exist, because that means that
no errors were found at the last edition, so any missing commits here
have already been picked.
Five tests are added to t3404. The tests for
`rebase.missingCommitsCheck = warn' and `rebase.missingCommitsCheck =
error' have a similar structure. First, we start a rebase with an
incorrect command on the first line. Then, we edit the todo list,
removing the first and the last lines. This demonstrates that
`--edit-todo' notices dropped commits, but not when the command is
incorrect. Then, we restore the original todo list, and edit it to
remove the last line. This demonstrates that if we add a commit after
the initial edit, then remove it, `--edit-todo' will notice that it
has been dropped. Then, the actual rebase takes place. In the third
test, it is also checked that `--continue' will refuse to resume the
rebase if commits were dropped. The fourth test checks that no errors
are raised when resuming a rebase after resolving a conflict, the fifth
checks that no errors are raised when editing the todo list after
pausing the rebase.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message contained in `edit_todo_list_advice' (sequencer.c) is
printed after the initial edit of the todo list if it can't be parsed or
if commits were dropped. This is done either in complete_action() for
`rebase -i', or in check_todo_list_from_file() for `rebase -p'.
Since we want to add this check when editing the list, we also want to
use this message from edit_todo_list() (rebase-interactive.c). To this
end, check_todo_list_from_file() is moved to rebase-interactive.c, and
`edit_todo_list_advice' is copied there. In the next commit,
complete_action() will stop using it, and `edit_todo_list_advice' will
be removed from sequencer.c.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the first things done when using a sequencer-based
rebase (ie. `rebase -i', `rebase -r', or `rebase -m') is to make a todo
list. This requires knowledge of the commit range to rebase. To get
the oid of the last commit of the range, the tip of the branch to rebase
is checked out with prepare_branch_to_be_rebased(), then the oid of the
head is read. After this, the tip of the branch is not even modified.
The `am' backend, on the other hand, does not check out the branch.
On big repositories, it's a performance penalty: with `rebase -i', the
user may have to wait before editing the todo list while git is
extracting the branch silently, and "quiet" rebases will be slower than
`am'.
Since we already have the oid of the tip of the branch in
`opts->orig_head', it's useless to switch to this commit.
This removes the call to prepare_branch_to_be_rebased() in
do_interactive_rebase(), and adds a `orig_head' parameter to
get_revision_ranges(). prepare_branch_to_be_rebased() is removed as it
is no longer used.
This introduces a visible change: as we do not switch on the tip of the
branch to rebase, no reflog entry is created at the beginning of the
rebase for it.
Unscientific performance measurements, performed on linux.git, are as
follow:
Before this patch:
$ time git rebase -m --onto v4.18 463fa44eec2fef50~ 463fa44eec2fef50
real 0m8,940s
user 0m6,830s
sys 0m2,121s
After this patch:
$ time git rebase -m --onto v4.18 463fa44eec2fef50~ 463fa44eec2fef50
real 0m1,834s
user 0m0,916s
sys 0m0,206s
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 5d9324e0f4, reversing
changes made to c58ae96fc4.
The topic turns out to be too buggy for real use.
cf. <f2fe7437-8a48-3315-4d3f-8d51fe4bb8f1@gmail.com>
"git rebase -i" learned a few options that are known by "git
rebase" proper.
* ra/rebase-i-more-options:
rebase -i: finishing touches to --reset-author-date
rebase: add --reset-author-date
rebase -i: support --ignore-date
sequencer: rename amend_author to author_to_rename
rebase -i: support --committer-date-is-author-date
sequencer: allow callers of read_author_script() to ignore fields
rebase -i: add --ignore-whitespace flag
"rebase -i" ceased to run post-commit hook by mistake in an earlier
update, which has been corrected.
* pw/post-commit-from-sequencer:
sequencer: run post-commit hook
move run_commit_hook() to libgit and use it there
sequencer.h fix placement of #endif
t3404: remove uneeded calls to set_fake_editor
t3404: set $EDITOR in subshell
t3404: remove unnecessary subshell
rebase am already has this flag to "lie" about the author date
by changing it to the committer (current) date. Let's add the same
for interactive machinery.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase am already has this flag to "lie" about the committer date
by changing it to the author date. Let's add the same for
interactive machinery.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 65850686cf ("rebase -i: rewrite write_basic_state() in C",
2018-08-28) accidentially added new function declarations after
the #endif at the end of the include guard.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --rebase-merges" learned to drive different merge
strategies and pass strategy specific options to them.
* js/rebase-r-strategy:
t3427: accelerate this test by using fast-export and fast-import
rebase -r: do not (re-)generate root commits with `--root` *and* `--onto`
t3418: test `rebase -r` with merge strategies
t/lib-rebase: prepare for testing `git rebase --rebase-merges`
rebase -r: support merge strategies other than `recursive`
t3427: fix another incorrect assumption
t3427: accommodate for the `rebase --merge` backend having been replaced
t3427: fix erroneous assumption
t3427: condense the unnecessarily repetitive test cases into three
t3427: move the `filter-branch` invocation into the `setup` case
t3427: simplify the `setup` test case significantly
t3427: add a clarifying comment
rebase: fold git-rebase--common into the -p backend
sequencer: the `am` and `rebase--interactive` scripts are gone
.gitignore: there is no longer a built-in `git-rebase--interactive`
t3400: stop referring to the scripted rebase
Drop unused git-rebase--am.sh
When rebasing a complete commit history onto a given commit, it is
pretty obvious that the root commits should be rebased on top of said
given commit.
To test this, let's kill two birds with one stone and add a test case to
t3427-rebase-subtree.sh that not only demonstrates that this works, but
also that `git rebase -r` works with merge strategies now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick/revert" learned a new "--skip" action.
* ra/cherry-pick-revert-skip:
cherry-pick/revert: advise using --skip
cherry-pick/revert: add --skip option
sequencer: use argv_array in reset_merge
sequencer: rename reset_for_rollback to reset_merge
sequencer: add advice for revert
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
git am or rebase have a --skip flag to skip the current commit if the
user wishes to do so. During a cherry-pick or revert a user could
likewise skip a commit, but needs to use 'git reset' (or in the case
of conflicts 'git reset --merge'), followed by 'git (cherry-pick |
revert) --continue' to skip the commit. This is more annoying and
sometimes confusing on the users' part. Add a `--skip` option to make
skipping commits easier for the user and to make the commands more
consistent.
In the next commit, we will change the advice messages hence finishing
the process of teaching revert and cherry-pick "how to skip commits".
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git chery-pick" (and "revert" that shares the same runtime engine)
that deals with multiple commits got confused when the final step
gets stopped with a conflict and the user concluded the sequence
with "git commit". Attempt to fix it by cleaning up the state
files used by these commands in such a situation.
* pw/clean-sequencer-state-upon-final-commit:
fix cherry-pick/revert status after commit
commit/reset: try to clean up sequencer state
The internal implementation of "git rebase -i" has been updated to
avoid forking a separate "rebase--interactive" process.
* pw/rebase-i-internal:
rebase -i: run without forking rebase--interactive
rebase: use a common action enum
rebase -i: use struct rebase_options in do_interactive_rebase()
rebase -i: use struct rebase_options to parse args
rebase -i: use struct object_id for squash_onto
rebase -i: use struct commit when parsing options
rebase -i: remove duplication
rebase -i: combine rebase--interactive.c with rebase.c
rebase: use OPT_RERERE_AUTOUPDATE()
rebase: rename write_basic_state()
rebase: don't translate trace strings
sequencer: always discard index after checkout
The list of conflicted paths shown in the editor while concluding a
conflicted merge was shown above the scissors line when the
clean-up mode is set to "scissors", even though it was commented
out just like the list of updated paths and other information to
help the user explain the merge better.
* dl/merge-cleanup-scissors-fix:
cherry-pick/revert: add scissors line on merge conflict
sequencer.c: save and restore cleanup mode
merge: add scissors line on merge conflict
merge: cleanup messages like commit
parse-options.h: extract common --cleanup option
commit: extract cleanup_mode functions to sequencer
t7502: clean up style
t7604: clean up style
t3507: clean up style
t7600: clean up style
"git cherry-pick" run with the "-x" or the "--signoff" option used
to (and more importantly, ought to) clean up the commit log message
with the --cleanup=space option by default, but this has been
broken since late 2017. This has been fixed.
* pw/sequencer-cleanup-with-signoff-x-fix:
sequencer: fix cleanup with --signoff and -x
The scripted version of "git rebase -i" wrote and rewrote the todo
list many times during a single step of its operation, and the
recent C-rewrite made a faithful conversion of the logic to C. The
implementation has been updated to carry necessary information
around in-core to avoid rewriting the same file over and over
unnecessarily.
* ag/sequencer-reduce-rewriting-todo:
rebase--interactive: move transform_todo_file()
sequencer: use edit_todo_list() in complete_action()
rebase-interactive: rewrite edit_todo_list() to handle the initial edit
rebase-interactive: append_todo_help() changes
rebase-interactive: use todo_list_write_to_file() in edit_todo_list()
sequencer: refactor skip_unnecessary_picks() to work on a todo_list
rebase--interactive: move rearrange_squash_in_todo_file()
rebase--interactive: move sequencer_add_exec_commands()
sequencer: change complete_action() to use the refactored functions
sequencer: make sequencer_make_script() write its script to a strbuf
sequencer: refactor rearrange_squash() to work on a todo_list
sequencer: refactor sequencer_add_exec_commands() to work on a todo_list
sequencer: refactor check_todo_list() to work on a todo_list
sequencer: introduce todo_list_write_to_file()
sequencer: refactor transform_todos() to work on a todo_list
sequencer: remove the 'arg' field from todo_item
sequencer: make the todo_list structure public
sequencer: changes in parse_insn_buffer()
This is in preparation for using `struct rebase_options` when parsing
options in cmd_rebase__interactive(). Using a string for onto,
restrict_revision and upstream, was a hangover from the scripted version
of rebase. The functions that use these variables are updated to take a
`struct commit`.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the checkout runs in a separate process our index will be out of date
so it should be discarded. The existing callers are not doing this
consistently so do it here to avoid the callers having to worry about
it.
This fixes some test failures that happen if do_interactive_rebase() is
called without forking rebase--interactive which we will implement
shortly. Running
git rebase -i master topic
starting on master created empty todo lists because all the commits in
topic were marked as cherry-picks. After topic was checked out in
prepare_branch_to_be_rebased() the working tree contained the contents
from topic but the index contained master and the cache entries were
still valid. This meant that diff_populate_filespec() which loads the
blobs when calculating patch-id's ended up reading the contents for
master from the working tree which actually contained topic.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ag/sequencer-reduce-rewriting-todo:
rebase--interactive: move transform_todo_file()
sequencer: use edit_todo_list() in complete_action()
rebase-interactive: rewrite edit_todo_list() to handle the initial edit
rebase-interactive: append_todo_help() changes
rebase-interactive: use todo_list_write_to_file() in edit_todo_list()
sequencer: refactor skip_unnecessary_picks() to work on a todo_list
rebase--interactive: move rearrange_squash_in_todo_file()
rebase--interactive: move sequencer_add_exec_commands()
sequencer: change complete_action() to use the refactored functions
sequencer: make sequencer_make_script() write its script to a strbuf
sequencer: refactor rearrange_squash() to work on a todo_list
sequencer: refactor sequencer_add_exec_commands() to work on a todo_list
sequencer: refactor check_todo_list() to work on a todo_list
sequencer: introduce todo_list_write_to_file()
sequencer: refactor transform_todos() to work on a todo_list
sequencer: remove the 'arg' field from todo_item
sequencer: make the todo_list structure public
sequencer: changes in parse_insn_buffer()
Fix a bug where the scissors line is placed after the Conflicts:
section, in the case where a merge conflict occurs and
commit.cleanup = scissors.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before commit 356ee4659b ("sequencer: try to commit without forking 'git
commit'", 2017-11-24) when --signoff or -x were given on the command
line the commit message was cleaned up with --cleanup=space or
commit.cleanup if it was set. Unfortunately this behavior was lost when
I implemented committing without forking. Fix this and add some tests to
catch future regressions.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user commits a conflict resolution using `git commit` in the
middle of a sequence of cherry-picks/reverts then `git status` missed
the fact that a cherry-pick/revert is still in progress.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-picking or reverting a sequence of commits and if the final
pick/revert has conflicts and the user uses `git commit` to commit the
conflict resolution and does not run `git cherry-pick --continue` then
the sequencer state is left behind. This can cause problems later. In my
case I cherry-picked a sequence of commits the last one of which I
committed with `git commit` after resolving some conflicts, then a while
later, on a different branch I aborted a revert which rewound my HEAD to
the end of the cherry-pick sequence on the previous branch. Avoid this
potential problem by removing the sequencer state if we're committing or
resetting the final pick in a sequence.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As transform_todo_file() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
edit_todo_list() is changed to work on a todo_list, and to handle the
initial edition of the todo list (ie. making a backup of the todo
list).
It does not check for dropped commits yet, as todo_list_check() does not
take the commits that have already been processed by the rebase (ie. the
todo list is edited in the middle of a rebase session).
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like complete_action(), edit_todo_list() used a
function (transform_todo_file()) that read the todo list from the disk
and wrote it back, resulting in useless disk accesses.
This changes edit_todo_list() to call directly todo_list_write_to_file()
instead.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As rearrange_squash_in_todo_file() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way, and the error
handling is slightly improved.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As sequencer_add_exec_commands() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
complete_action() used functions that read the todo-list file, made some
changes to it, and wrote it back to the disk.
The previous commits were dedicated to separate the part that deals with
the file from the actual logic of these functions. Now that this is
done, we can call directly the "logic" functions to avoid useless file
access.
The parsing of the list has to be done by the caller. If the buffer of
the todo list provided by the caller is empty, a `noop' command is
directly added to the todo list, without touching the buffer.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sequencer_make_script() write its script to a strbuf (ie. the
buffer of a todo_list) instead of a FILE. This reduce the amount of
read/write made by rebase interactive.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors rearrange_squash() to work on a todo_list to avoid
redundant reads and writes. The function is renamed
todo_list_rearrange_squash().
The old version created a new buffer, which was directly written to the
disk. This new version creates a new item list by just copying items
from the old item list, without creating a new buffer. This eliminates
the need to reparse the todo list, but this also means its buffer cannot
be directly written to the disk.
As rebase -p still need to check the todo list from the disk, a new
function is introduced, rearrange_squash_in_todo_file().
complete_action() still uses rearrange_squash_in_todo_file() for now.
This will be changed in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors sequencer_add_exec_commands() to work on a todo_list to
avoid redundant reads and writes to the disk.
Instead of inserting the `exec' commands between the other commands and
re-parsing the buffer at the end, they are appended to the buffer once,
and a new list of items is created. Items from the old list are copied
across and new `exec' items are appended when necessary. This
eliminates the need to reparse the buffer, but this also means we have
to use todo_list_write_to_disk() to write the file.
todo_list_add_exec_commands() and sequencer_add_exec_commands() are
modified to take a string list instead of a string -- one item for each
command. This makes it easier to insert a new command to the todo list
for each command to execute.
sequencer_add_exec_commands() still reads the todo list from the disk,
as it is needed by rebase -p.
complete_action() still uses sequencer_add_exec_commands() for now.
This will be changed in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d0aaa46fd3 ("commit: move empty message checks to libgit",
2017-11-10) removes the last use of 'sign_off_header' outside of
the "sequencer.c" source file. Remove the extern declaration from
the header file and mark the definition of the symbol with the
static keyword.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
"git rebase --merge" as been reimplemented by reusing the internal
machinery used for "git rebase -i".
* en/rebase-merge-on-sequencer:
rebase: implement --merge via the interactive machinery
rebase: define linearization ordering and enforce it
git-legacy-rebase: simplify unnecessary triply-nested if
git-rebase, sequencer: extend --quiet option for the interactive machinery
am, rebase--merge: do not overlook --skip'ed commits with post-rewrite
t5407: add a test demonstrating how interactive handles --skip differently
rebase: fix incompatible options error message
rebase: make builtin and legacy script error messages the same
"git rebase -i" learned to re-execute a command given with 'exec'
to run after it failed the last time.
* js/rebase-i-redo-exec:
rebase: introduce a shortcut for --reschedule-failed-exec
rebase: add a config option to default to --reschedule-failed-exec
rebase: introduce --reschedule-failed-exec
This refactors check_todo_list() to work on a todo_list to avoid
redundant reads and writes to the disk. The function is renamed
todo_list_check(). The parsing of the two todo lists is left to the
caller.
As rebase -p still need to check the todo list from the disk, a new
function is introduced, check_todo_list_from_file(). It reads the file
from the disk, parses it, pass the todo_list to todo_list_check(), and
writes it back to the disk.
As get_missing_commit_check_level() and the enum
missing_commit_check_level are no longer needed inside of sequencer.c,
they are moved to rebase-interactive.c, and made static again.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a new function to recreate the text of a todo list from
its commands and write it to a file. This will be useful as the next
few commits will change the use of the buffer in struct todo_list so it
will no longer be a mirror of the file on disk.
This functionality already exists in todo_list_transform(), but this
function was made to replace the buffer of a todo list, which is not
what we want here. Thus, the part of todo_list_transform() that
replaces the buffer is dropped, and the function is renamed
todo_list_to_strbuf(). It is called by todo_list_write_to_file() to
fill the buffer to write to the disk.
todo_list_write_to_file() can also take care of appending the help text
to the buffer before writing it to the disk, or to write only the first
n items of the list. This feature will be used by
skip_unnecessary_picks(), which has to write done commands in a file.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors transform_todos() to work on a todo_list. The function
is renamed todo_list_transform().
As rebase -p still need to check the todo list from the disk, a new
function is introduced, transform_todo_file(). It is still used by
complete_action() and edit_todo_list() for now, but they will be
replaced in a future commit.
todo_list_transform() is not a static function, because it will be used
by edit_todo_list() from rebase-interactive.c in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu
Junio C Hamano
Elijah Newren
Alban Gruin
Rohit Ashiwal
Phillip Wood
Johannes Schindelin
Ramsay Jones