Teach push to respect the --dry-run option when configured to
recursively push submodules 'on-demand'. This is done by passing the
--dry-run flag to the child process which performs a push for a
submodules when performing a dry-run.
In order to preserve good user experience, the additional check for
unpushed submodules is skipped during a dry-run when
--recurse-submodules=on-demand. The check is skipped because the submodule
pushes were performed as dry-runs and this check would always fail as the
submodules would still need to be pushed.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are iterating over each pushed ref and want to check whether it
contains changes to submodules. Instead of immediately checking each ref
lets first collect them and then do the check for all of them in one
revision walk.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-diff and friends a new format for displaying the difference
of a submodule. The new format is an inline diff of the contents of the
submodule between the commit range of the update. This allows the user
to see the actual code change caused by a submodule update.
Add tests for the new format and option.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we're going to be changing this function in a future patch, lets
go ahead and convert this to use object_id now.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier addition of "sanitize_submodule_env" with 14111fc4 (git:
submodule honor -c credential.* from command line, 2016-02-29)
turned out to be a convoluted no-op; implement what it wanted to do
correctly, and stop filtering settings given via "git -c var=val".
* jk/submodule-c-credential:
submodule: stop sanitizing config options
submodule: use prepare_submodule_repo_env consistently
submodule--helper: move config-sanitizing to submodule.c
submodule: export sanitized GIT_CONFIG_PARAMETERS
t5550: break submodule config test into multiple sub-tests
t5550: fix typo in $HTTPD_URL
The point of having a whitelist of command-line config
options to pass to submodules was two-fold:
1. It prevented obvious nonsense like using core.worktree
for multiple repos.
2. It could prevent surprise when the user did not mean
for the options to leak to the submodules (e.g.,
http.sslverify=false).
For case 1, the answer is mostly "if it hurts, don't do
that". For case 2, we can note that any such example has a
matching inverted surprise (e.g., a user who meant
http.sslverify=true to apply everywhere, but it didn't).
So this whitelist is probably not giving us any benefit, and
is already creating a hassle as people propose things to put
on it. Let's just drop it entirely.
Note that we still need to keep a special code path for
"prepare the submodule environment", because we still have
to take care to pass through $GIT_CONFIG_PARAMETERS (and
block the rest of the repo-specific environment variables).
We can do this easily from within the submodule shell
script, which lets us drop the submodule--helper option
entirely (and it's OK to do so because as a "--" program, it
is entirely a private implementation detail).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions should be used by any code which spawns a
submodule process, which may happen in submodule.c (e.g.,
for spawning fetch). Let's move them there and make them
public so that submodule--helper can continue to use them.
Since they're now public, let's also provide a basic overview
of their intended use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By having the `submodule init` functionality in C, we can reference it
easier from other parts in the code in later patches. The code is split
up to have one function to initialize one submodule and a calling function
that takes care of the rest, such as argument handling and translating the
arguments to the paths of the submodules.
This is the first submodule subcommand that is fully converted to C
except for the usage string, so this is actually removing a call to
the `submodule--helper list` function, which is supposed to be used in
this transition. Instead we'll make a direct call to `module_list_compute`.
An explanation why we need to edit the prefixes in cmd_update in
git-submodule.sh in this patch:
By having no processing in the shell part, we need to convey the notion
of wt_prefix and prefix to the C parts, which former patches punted on
and did the processing of displaying path in the shell.
`wt_prefix` used to hold the path from the repository root to the current
directory, e.g. wt_prefix would be t/ if the user invoked the
`git submodule` command in ~/repo/t and ~repo is the GIT_DIR.
`prefix` used to hold the relative path from the repository root to the
operation, e.g. if you have recursive submodules, the shell script would
modify the `prefix` in each recursive step by adding the submodule path.
We will pass `wt_prefix` into the C helper via `git -C <dir>` as that
will setup git in the directory the user actually called git-submodule.sh
from. The `prefix` will be passed in via the `--prefix` option.
Having `prefix` and `wt_prefix` relative to the GIT_DIR of the
calling superproject is unfortunate with this patch as the C code doesn't
know about a possible recursion from a superproject via `submodule update
--init --recursive`.
To fix this, we change the meaning of `wt_prefix` to point to the current
project instead of the superproject and `prefix` to include any relative
paths issues in the superproject. That way `prefix` will become the leading
part for displaying paths and `wt_prefix` will be empty in recursive
calls for now.
The new notion of `wt_prefix` and `prefix` still allows us to reconstruct
the calling directory in the superproject by just traveling reverse of
`prefix`.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule" reports the paths of submodules the command
recurses into, but this was incorrect when the command was not run
from the root level of the superproject.
Any further comments? Otherwise will merge to 'next'.
* sb/submodule-path-misc-bugs: (600 commits)
t7407: make expectation as clear as possible
submodule update: test recursive path reporting from subdirectory
submodule update: align reporting path for custom command execution
submodule status: correct path handling in recursive submodules
submodule update --init: correct path handling in recursive submodules
submodule foreach: correct path display in recursive submodules
Git 2.8
Documentation: fix git-p4 AsciiDoc formatting
mingw: skip some tests in t9115 due to file name issues
t1300: fix the new --show-origin tests on Windows
t1300-repo-config: make it resilient to being run via 'sh -x'
config --show-origin: report paths with forward slashes
submodule: fix regression for deinit without submodules
l10n: pt_PT: Update and add new translations
l10n: ca.po: update translation
Git 2.8-rc4
Documentation: fix broken linkgit to git-config
Documentation: use ASCII quotation marks in git-p4
Revert "config.mak.uname: use clang for Mac OS X 10.6"
git-compat-util: st_add4: work around gcc 4.2.x compiler crash
...
This allows to configure fetching and updating in parallel
without having the command line option.
This moved the responsibility to determine how many parallel processes
to start from builtin/fetch to submodule.c as we need a way to communicate
"The user did not specify the number of parallel processes in the command
line options" in the builtin fetch. The submodule code takes care of
the precedence (CLI > config > default).
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently submodule.<name>.update is only handled by git-submodule.sh.
C code will start to need to make use of that value as more of the
functionality of git-submodule.sh moves into library code in C.
Add the update field to 'struct submodule' and populate it so it can
be read as sm->update or from sm->update_command.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a framework to spawn a group of processes in parallel, and use
it to run "git fetch --recurse-submodules" in parallel.
Rerolled and this seems to be a lot cleaner. The merge of the
earlier one to 'next' has been reverted.
* sb/submodule-parallel-fetch:
submodules: allow parallel fetching, add tests and documentation
fetch_populated_submodules: use new parallel job processing
run-command: add an asynchronous parallel child processor
sigchain: add command to pop all common signals
strbuf: add strbuf_read_once to read without blocking
xread: poll on non blocking fds
submodule.c: write "Fetching submodule <foo>" to stderr
The --recurse-submodules command line parameter has existed for some
time but it has no config file equivalent.
Following the style of the corresponding parameter for git fetch, let's
invent push.recurseSubmodules to provide a default for this
parameter. This also requires the addition of --recurse-submodules=no to
allow the configuration to be overridden on the command line when
required.
The most straightforward way to implement this appears to be to make
push use code in submodule-config in a similar way to fetch.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Jeff King <peff@peff.net>
We should not die when reading the submodule config cache since the
user might not be able to get out of that situation when the
configuration is part of the history.
We should handle this condition later when the value is about to be
used.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We remove the extracted functions and directly parse into and read out
of the cache. This allows us to have one unified way of accessing
submodule configuration values specific to single submodules. Regardless
whether we need to access a configuration from history or from the
worktree.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a superproject some commands need to interact with submodules. They
need to query values from the .gitmodules file either from the worktree
of from certain revisions. At the moment this is quite hard since a
caller would need to read the .gitmodules file from the history and then
parse the values. We want to provide an API for this so we have one
place to get values from .gitmodules from any revision (including the
worktree).
The API is realized as a cache which allows us to lazily read
.gitmodules configurations by commit into a runtime cache which can then
be used to easily lookup values from it. Currently only the values for
path or name are stored but it can be extended for any value needed.
It is expected that .gitmodules files do not change often between
commits. Thats why we lookup the .gitmodules sha1 from a commit and then
either lookup an already parsed configuration or parse and cache an
unknown one for each sha1. The cache is lazily build on demand for each
requested commit.
This cache can be used for all purposes which need knowledge about
submodule configurations. Example use cases are:
* Recursive submodule checkout needs to lookup a submodule name from
its path when a submodule first appears. This needs be done before
this configuration exists in the worktree.
* The implementation of submodule support for 'git archive' needs to
lookup the submodule name to generate the archive when given a
revision that is not checked out.
* 'git fetch' when given the --recurse-submodules=on-demand option (or
configuration) needs to lookup submodule names by path from the
database rather than reading from the worktree. For new submodule it
needs to lookup the name from its path to allow cloning new
submodules into the .git folder so they can be checked out without
any network interaction when the user does a checkout of that
revision.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently using "git rm" on a submodule removes the submodule's work tree
from that of the superproject and the gitlink from the index. But the
submodule's section in .gitmodules is left untouched, which is a leftover
of the now removed submodule and might irritate users (as opposed to the
setting in .git/config, this must stay as a reminder that the user showed
interest in this submodule so it will be repopulated later when an older
commit is checked out).
Let "git rm" help the user by not only removing the submodule from the
work tree but by also removing the "submodule.<submodule name>" section
from the .gitmodules file and stage both. This doesn't happen when the
"--cached" option is used, as it would modify the work tree. This also
silently does nothing when no .gitmodules file is found and only issues a
warning when it doesn't have a section for this submodule. This is because
the user might just use plain gitlinks without the .gitmodules file or has
already removed the section by hand before issuing the "git rm" command
(in which case the warning reminds him that rm would have done that for
him). Only when .gitmodules is found and contains merge conflicts the rm
command will fail and tell the user to resolve the conflict before trying
again.
Also extend the man page to inform the user about this new feature. While
at it promote the submodule sub-section to a chapter as it made not much
sense under "REMOVING FILES THAT HAVE DISAPPEARED FROM THE FILESYSTEM".
In t7610 three uses of "git rm submod" had to be replaced with "git rm
--cached submod" because that test expects .gitmodules and the work tree
to stay untouched. Also in t7400 the tests for the remaining settings in
the .gitmodules file had to be changed to assert that these settings are
missing.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently using "git mv" on a submodule moves the submodule's work tree in
that of the superproject. But the submodule's path setting in .gitmodules
is left untouched, which is now inconsistent with the work tree and makes
git commands that rely on the proper path -> name mapping (like status and
diff) behave strangely.
Let "git mv" help here by not only moving the submodule's work tree but
also updating the "submodule.<submodule name>.path" setting from the
.gitmodules file and stage both. This doesn't happen when no .gitmodules
file is found and only issues a warning when it doesn't have a section for
this submodule. This is because the user might just use plain gitlinks
without the .gitmodules file or has already updated the path setting by
hand before issuing the "git mv" command (in which case the warning
reminds him that mv would have done that for him). Only when .gitmodules
is found and contains merge conflicts the mv command will fail and tell
the user to resolve the conflict before trying again.
Also extend the man page to inform the user about this new feature.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the new is_staging_gitmodules_ok() and stage_updated_gitmodules()
functions to submodule.c. The first makes it possible for call sites to
see if the .gitmodules file did contain any unstaged modifications they
would accidentally stage in addition to those they intend to stage
themselves. The second function stages all modifications to the
.gitmodules file, both will be used by subsequent patches for the mv
and rm commands.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When moving a submodule which uses a gitfile to point to the git directory
stored in .git/modules/<name> of the superproject two changes must be made
to make the submodule work: the .git file and the core.worktree setting
must be adjusted to point from work tree to git directory and back.
Achieve that by remembering which submodule uses a gitfile by storing the
result of read_gitfile() of each submodule. If that is not NULL the new
function connect_work_tree_and_git_dir() is called after renaming the
submodule's work tree which updates the two settings to the new values.
Extend the man page to inform the user about that feature (and while at it
change the description to not talk about a script anymore, as mv is a
builtin for quite some time now).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "git log -p --submodule=log", the submodule log is not
indented by the graph output, although all other lines are. Fix this by
prepending the current line prefix to each line of the submodule log.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, 'git diff --submodule' displays output with a bold diff
header for non-submodules. So this part is in bold:
diff --git a/file1 b/file1
index 30b2f6c..2638038 100644
--- a/file1
+++ b/file1
For submodules, the header looks like this:
Submodule submodule1 012b072..248d0fd:
Unfortunately, it's easy to miss in the output because it's not bold.
Change this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rm submodule" cannot blindly remove a submodule directory as
its working tree may have local changes, and worse yet, it may even
have its repository embedded in it. Teach it some special cases
where it is safe to remove a submodule, specifically, when there is
no local changes in the submodule working tree, and its repository
is not embedded in its working tree but is elsewhere and uses the
gitfile mechanism to point at it.
* jl/submodule-rm:
submodule: teach rm to remove submodules unless they contain a git directory
Currently using "git rm" on a submodule - populated or not - fails with
this error:
fatal: git rm: '<submodule path>': Is a directory
This made sense in the past as there was no way to remove a submodule
without possibly removing unpushed parts of the submodule's history
contained in its .git directory too, so erroring out here protected the
user from possible loss of data.
But submodules cloned with a recent git version do not contain the .git
directory anymore, they use a gitfile to point to their git directory
which is safely stored inside the superproject's .git directory. The work
tree of these submodules can safely be removed without losing history, so
let's teach git to do so.
Using rm on an unpopulated submodule now removes the empty directory from
the work tree and the gitlink from the index. If the submodule's directory
is missing from the work tree, it will still be removed from the index.
Using rm on a populated submodule using a gitfile will apply the usual
checks for work tree modification adapted to submodules (unless forced).
For a submodule that means that the HEAD is the same as recorded in the
index, no tracked files are modified and no untracked files that aren't
ignored are present in the submodules work tree (ignored files are deemed
expendable and won't stop a submodule's work tree from being removed).
That logic has to be applied in all nested submodules too.
Using rm on a submodule which has its .git directory inside the work trees
top level directory will just error out like it did before to protect the
repository, even when forced. In the future git could either provide a
message informing the user to convert the submodule to use a gitfile or
even attempt to do the conversion itself, but that is not part of this
change.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch_populated_submodules() allocates the full argv array it uses to
recurse into the submodules from the number of given options plus the six
argv values it is going to add. It then initializes it with those values
which won't change during the iteration and copies the given options into
it. Inside the loop the two argv values different for each submodule get
replaced with those currently valid.
However, this technique is brittle and error-prone (as the comment to
explain the magic number 6 indicates), so let's replace it with an
argv_array. Instead of replacing the argv values, push them to the
argv_array just before the run_command() call (including the option
separating them) and pop them from the argv_array right after that.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push --recurse-submodules" learns to optionally look into the
histories of submodules bound to the superproject and push them out.
By Heiko Voigt
* hv/submodule-recurse-push:
push: teach --recurse-submodules the on-demand option
Refactor submodule push check to use string list instead of integer
Teach revision walking machinery to walk multiple times sequencially
Add void to make it match its definition in submodule.c.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using this option git will search for all submodules that
have changed in the revisions to be send. It will then try to
push the currently checked out branch of each submodule.
This helps when a user has finished working on a change which
involves submodules and just wants to push everything in one go.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to tell the user which submodules have not been pushed.
Additionally this is helpful when we want to automatically try to push
submodules that have not been pushed.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The submodule merge search is not useful during virtual merges because
the results cannot be used automatically. Furthermore any suggestions
made by the search may apply to commits different than HEAD:sub and
MERGE_HEAD:sub, thus confusing the user. Skip searching for submodule
merges during a virtual merge such as that between B and C while merging
the heads of:
B---BC
/ \ /
A X
\ / \
C---CB
Run the search only when the recursion level is zero (!o->call_depth).
This fixes known breakage tested in t7405-submodule-merge.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working with submodules it is easy to forget to push a
submodule to the server but pushing a super-project that
contains a commit for that submodule. The result is that the
superproject points at a submodule commit that is not available
on the server.
This adds the option --recurse-submodules=check to push. When
using this option git will check that all submodule commits that
are about to be pushed are present on a remote of the submodule.
To be able to use a combined diff, disabling a diff callback has
been removed from combined-diff.c.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now the --recurse-submodules option could only be used to either
fetch all populated submodules recursively or to disable recursion
completely. As fetch and pull now by default just fetch those submodules
for which new commits have been fetched in the superproject, a command
line option to enforce that behavior is needed to be able to override
configuration settings.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To be able to access all commits of populated submodules referenced by the
superproject it is sufficient to only then let "git fetch" recurse into a
submodule when the new commits fetched in the superproject record new
commits for it. Having these commits present is extremely useful when
using the "--submodule" option to "git diff" (which is what "git gui" and
"gitk" do since 1.6.6), as all submodule commits needed for creating a
descriptive output can be accessed. Also merging submodule commits (added
in 1.7.3) depends on the submodule commits in question being present to
work. Last but not least this enables disconnected operation when using
submodules, as all commits necessary for a successful "git submodule
update -N" will have been fetched automatically. So we choose this mode as
the default for fetch and pull.
Before a new or changed ref from upstream is updated in update_local_ref()
"git rev-list <new-sha1> --not --branches --remotes" is used to determine
all newly fetched commits. These are then walked and diffed against their
parent(s) to see if a submodule has been changed. If that is the case, its
path is stored to be fetched after the superproject fetch is completed.
Using the "--recurse-submodules" or the "--no-recurse-submodules" option
disables the examination of the fetched refs because the result will be
ignored anyway.
There is currently no infrastructure for storing deleted and new
submodules in the .git directory of the superproject. That's why fetch and
pull for now only fetch submodules that are already checked out and are
not renamed.
In t7403 the "--no-recurse-submodules" argument had to be added to "git
pull" to avoid failure because of the moved upstream submodule repo.
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new boolean option can be used to override the default for "git
fetch" and "git pull", which is to not recurse into populated submodules
and fetch all new commits there too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now you had to call "git submodule update" (without -N|--no-fetch
option) or something like "git submodule foreach git fetch" to fetch
new commits in populated submodules from their remote.
This could lead to "(commits not present)" messages in the output of
"git diff --submodule" (which is used by "git gui" and "gitk") after
fetching or pulling new commits in the superproject and is an obstacle for
implementing recursive checkout of submodules. Also "git submodule
update" cannot fetch changes when disconnected, so it was very easy to
forget to fetch the submodule changes before disconnecting only to
discover later that they are needed.
This patch adds the "--recurse-submodules" option to recursively fetch
each populated submodule from the url configured in the .git/config of the
submodule at the end of each "git fetch" or during "git pull" in the
superproject. The submodule paths are taken from the index.
The hidden option "--submodule-prefix" is added to "git fetch" to be able
to print out the full paths of nested submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* hv/submodule-find-ff-merge:
Implement automatic fast-forward merge for submodules
setup_revisions(): Allow walking history in a submodule
Teach ref iteration module about submodules
Conflicts:
submodule.c
The .gitmodules file is parsed for "submodule.<name>.ignore" entries
before looking for them in .git/config. Thus settings found in .git/config
will override those from .gitmodules, thereby allowing the local developer
to ignore settings given by the remote side while also letting upstream
set defaults for those users who don't have special needs.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "ignore" config option controls the default behavior for "git
status" and the diff family. It specifies under what circumstances they
consider submodules as modified and can be set separately for each
submodule.
The command line option "--ignore-submodules=" has been extended to accept
the new parameter "none" for both status and diff.
Users that chose submodules to get rid of long work tree scanning times
might want to set the "dirty" option for those submodules. This brings
back the pre 1.7.0 behavior, where submodule work trees were never
scanned for modifications. By using "--ignore-submodules=none" on the
command line the status and diff commands can be told to do a full scan.
This option can be set to the following values (which have the same name
and meaning as for the "--ignore-submodules" option of status and diff):
"all": All changes to the submodule will be ignored.
"dirty": Only differences of the commit recorded in the superproject and
the submodules HEAD will be considered modifications, all changes
to the work tree of the submodule will be ignored. When using this
value, the submodule will not be scanned for work tree changes at
all, leading to a performance benefit on large submodules.
"untracked": Only untracked files in the submodules work tree are ignored,
a changed HEAD and/or modified files in the submodule will mark it
as modified.
"none" (which is the default): Either untracked or modified files in a
submodules work tree or a difference between the subdmodules HEAD
and the commit recorded in the superproject will make it show up
as changed. This value is added as a new parameter for the
"--ignore-submodules" option of the diff family and "git status"
so the user can override the settings in the configuration.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This implements a simple merge strategy for submodule hashes. We check
whether one side of the merge candidates is already contained in the
other and then merge automatically.
If both sides contain changes we search for a merge in the submodule.
In case a single one exists we check that out and suggest it as the
merge resolution. A list of candidates is returned when we find multiple
merges that contain both sides of the changes.
This is useful for a workflow in which the developers can publish topic
branches in submodules and a separate maintainer merges them. In case
the developers always wait until their branch gets merged before tracking
them in the superproject all merges of branches that contain submodule
changes will be resolved automatically. If developers choose to track
their feature branch the maintainer might get a conflict but git will
search the submodule for a merge and suggest it/them as a resolution.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some use cases it is not desirable that "git status" considers
submodules that only contain untracked content as dirty. This may happen
e.g. when the submodule is not under the developers control and not all
build generated files have been added to .gitignore by the upstream
developers. Using the "untracked" parameter for the "--ignore-submodules"
option disables checking for untracked content and lets git diff report
them as changed only when they have new commits or modified content.
Sometimes it is not wanted to have submodules show up as changed when they
just contain changes to their work tree (this was the behavior before
1.7.0). An example for that are scripts which just want to check for
submodule commits while ignoring any changes to the work tree. Also users
having large submodules known not to change might want to use this option,
as the - sometimes substantial - time it takes to scan the submodule work
tree(s) is saved when using the "dirty" parameter.
And if you want to ignore any changes to submodules, you can now do that
by using this option without parameters or with "all" (when the config
option status.submodulesummary is set, using "all" will also suppress the
output of the submodule summary).
A new function handle_ignore_submodules_arg() is introduced to parse this
option new to "git status" in a single location, as "git diff" already
knew it.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1.7.0 submodules are considered dirty when they contain untracked
files. But when git status is called with the "-uno" option, the user
asked to ignore untracked files, so they must be ignored in submodules
too. To achieve this, the new flag DIFF_OPT_IGNORE_UNTRACKED_IN_SUBMODULES
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When encountering a dirty submodule while doing "git diff --submodule"
print an extra line for new untracked content and another for modified
but already tracked content. And if the HEAD of the submodule is equal
to the ref diffed against in the superproject, drop the output which
would just show the same SHA1s and no commit message headlines.
To achieve that, the dirty_submodule bitfield is expanded to two bits.
The output of "git status" inside the submodule is parsed to set the
according bits.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 8e08b4 git diff does append "-dirty" to the work tree side
if the working directory of a submodule contains new or modified files.
Lets do the same when the --submodule option is used.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now a submodule only then showed up as modified in the supermodule
when the last commit in the submodule differed from the one in the index
or the diffed against commit of the superproject. A dirty work tree
containing new untracked or modified files in a submodule was
undetectable when looking at it from the superproject.
Now git status and git diff (against the work tree) in the superproject
will also display submodules as modified when they contain untracked or
modified files, even if the compared ref matches the HEAD of the
submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you use the option --submodule=log you can see the submodule
summaries inlined in the diff, instead of not-quite-helpful SHA-1 pairs.
The format imitates what "git submodule summary" shows.
To do that, <path>/.git/objects/ is added to the alternate object
databases (if that directory exists).
This option was requested by Jens Lehmann at the GitTogether in Berlin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams
Heiko Voigt
Jacob Keller
Junio C Hamano
Jeff King
Stefan Beller
Mike Crowe
Jens Lehmann
John Keeping
Ramkumar Ramachandra
René Scharfe
Brad King
Fredrik Gustafsson
Johannes Schindelin