Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
Check if the strbuf containing data to sort is empty before attempting
to trim a trailing newline character.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value of write_in_full() is either "-1", or the
requested number of bytes[1]. If we make a partial write
before seeing an error, we still return -1, not a partial
value. This goes back to f6aa66cb95 (write_in_full: really
write in full or return error on disk full., 2007-01-11).
So checking anything except "was the return value negative"
is pointless. And there are a couple of reasons not to do
so:
1. It can do a funny signed/unsigned comparison. If your
"len" is signed (e.g., a size_t) then the compiler will
promote the "-1" to its unsigned variant.
This works out for "!= len" (unless you really were
trying to write the maximum size_t bytes), but is a
bug if you check "< len" (an example of which was fixed
recently in config.c).
We should avoid promoting the mental model that you
need to check the length at all, so that new sites are
not tempted to copy us.
2. Checking for a negative value is shorter to type,
especially when the length is an expression.
3. Linus says so. In d34cf19b89 (Clean up write_in_full()
users, 2007-01-11), right after the write_in_full()
semantics were changed, he wrote:
I really wish every "write_in_full()" user would just
check against "<0" now, but this fixes the nasty and
stupid ones.
Appeals to authority aside, this makes it clear that
writing it this way does not have an intentional
benefit. It's a historical curiosity that we never
bothered to clean up (and which was undoubtedly
cargo-culted into new sites).
So let's convert these obviously-correct cases (this
includes write_str_in_full(), which is just a wrapper for
write_in_full()).
[1] A careful reader may notice there is one way that
write_in_full() can return a different value. If we ask
write() to write N bytes and get a return value that is
_larger_ than N, we could return a larger total. But
besides the fact that this would imply a totally broken
version of write(), it would already invoke undefined
behavior. Our internal remaining counter is an unsigned
size_t, which means that subtracting too many byte will
wrap it around to a very large number. So we'll instantly
begin reading off the end of the buffer, trying to write
gigabytes (or petabytes) of data.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameter to basename(3) and dirname(3) traditionally had the type
"char *", but on OpenBSD it's been "const char *" for years. That
causes (at least) Clang to throw an incompatible-pointer-types warning
for test-path-utils, where we try to pass around pointers to these
functions.
Avoid this warning (which is fatal in DEVELOPER mode) by ignoring the
promise of OpenBSD's implementations to keep input strings unmodified
and enclosing them in POSIX-compatible wrappers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the hashmap API so that data to customize the behaviour of
the comparison function can be specified at the time a hashmap is
initialized.
* sb/hashmap-customize-comparison:
hashmap: migrate documentation from Documentation/technical into header
patch-ids.c: use hashmap correctly
hashmap.h: compare function has access to a data field
When using the hashmap a common need is to have access to caller provided
data in the compare function. A couple of times we abuse the keydata field
to pass in the data needed. This happens for example in patch-ids.c.
This patch changes the function signature of the compare function
to have one more void pointer available. The pointer given for each
invocation of the compare function must be defined in the init function
of the hashmap and is just passed through.
Documentation of this new feature is deferred to a later patch.
This is a rather mechanical conversion, just adding the new pass-through
parameter. However while at it improve the naming of the fields of all
compare functions used by hashmaps by ensuring unused parameters are
prefixed with 'unused_' and naming the parameters what they are (instead
of 'unused' make it 'unused_keydata').
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Remove the unused wildopts placeholder struct from being passed to all
wildmatch() invocations, or rather remove all the boilerplate NULL
parameters.
This parameter was added back in commit 9b3497cab9 ("wildmatch: rename
constants and update prototype", 2013-01-01) as a placeholder for
future use. Over 4 years later nothing has made use of it, let's just
remove it. It can be added in the future if we find some reason to
start using such a parameter.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just because the files backend can't retain reflogs for deleted
references is no reason that they shouldn't be supported by the
virtual method interface. Also, `delete_ref()` and `refs_delete_ref()`
have already gained `msg` parameters. Now let's add them to
`delete_refs()` and `refs_delete_refs()`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
"git gc" did not interact well with "git worktree"-managed
per-worktree refs.
* nd/worktree-kill-parse-ref:
refs: kill set_worktree_head_symref()
worktree.c: kill parse_ref() in favor of refs_resolve_ref_unsafe()
refs: introduce get_worktree_ref_store()
refs: add REFS_STORE_ALL_CAPS
refs.c: make submodule ref store hashmap generic
environment.c: fix potential segfault by get_git_common_dir()
Convert parse_tree_indirect to take a pointer to struct object_id.
Update all the callers. This transformation was achieved using the
following semantic patch and manual updates to the declaration and
definition. Update builtin/checkout.c manually as well, since it uses a
ternary expression not handled by the semantic patch.
@@
expression E1;
@@
- parse_tree_indirect(E1.hash)
+ parse_tree_indirect(&E1)
@@
expression E1;
@@
- parse_tree_indirect(E1->hash)
+ parse_tree_indirect(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the sha1 member of struct cache_tree to struct object_id by
changing the definition and applying the following semantic patch, plus
the standard object_id transforms:
@@
struct cache_tree E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct cache_tree *E1;
@@
- E1->sha1
+ E1->oid.hash
Fix up one reference to active_cache_tree which was not automatically
caught by Coccinelle. These changes are prerequisites for converting
parse_object.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" that handles a lot of paths has been optimized by
reducing the number of unnecessary checks of paths in the
has_dir_name() function.
* jh/add-index-entry-optim:
read-cache: speed up has_dir_name (part 2)
read-cache: speed up has_dir_name (part 1)
read-cache: speed up add_index_entry during checkout
p0006-read-tree-checkout: perf test to time read-tree
read-cache: add strcmp_offset function
The manual parsing code is replaced with a call to refs_resolve_ref_unsafe().
The manual parsing code must die because only refs/files-backend.c
should do that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, Git's source code treats all timestamps as if they were
unsigned longs. Therefore, it is okay to write "%lu" when printing them.
There is a substantial problem with that, though: at least on Windows,
time_t is *larger* than unsigned long, and hence we will want to switch
away from the ill-specified `unsigned long` data type.
So let's introduce the pseudo format "PRItime" (currently simply being
defined to "lu") to make it easier to change the data type used for
timestamps.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, Git's source code represents all timestamps as `unsigned
long`. In preparation for using a more appropriate data type, let's
introduce a symbol `parse_timestamp` (currently being defined to
`strtoul`) where appropriate, so that we can later easily switch to,
say, use `strtoull()` instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code refers to timestamps as unsigned long, which is
ill-defined, as there is no guarantee about the number of bits that
data type has.
In preparation of switching to another data type that is large enough
to hold "far in the future" dates, we need to prepare the t0006-date.sh
script for the case where we *still* cannot format those dates if the
system library uses 32-bit time_t.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code refers to timestamps as unsigned longs. On 32-bit
platforms, as well as on Windows, unsigned long is not large enough to
capture dates that are "absurdly far in the future".
It is perfectly valid by the C standard, of course, for the `long` data
type to refer to 32-bit integers. That is why the `time_t` data type
exists: so that it can be 64-bit even if `long` is 32-bit. Git's source
code simply uses an incorrect data type for timestamps, is all.
The earlier quick fix 6b9c38e14c (t0006: skip "far in the future" test
when unsigned long is not long enough, 2016-07-11) papered over this
issue simply by skipping the respective test cases on platforms where
they would fail due to the data type in use.
This quick fix, however, tests for *long* to be 64-bit or not. What we
need, though, is a test that says whether *whatever data type we use for
timestamps* is 64-bit or not.
The same quick fix was used to handle the similar problem where Git's
source code uses `unsigned long` to represent size, instead of `size_t`,
conflating the two issues.
So let's just add another prerequisite to test specifically whether
timestamps are represented by a 64-bit data type or not. Later, after we
switch to a larger data type, we can flip that prerequisite to test
`time_t` instead of `long`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hotfix for a topic that is already in 'master'.
* jh/memihash-opt:
p0004: make perf test executable
t3008: skip lazy-init test on a single-core box
test-online-cpus: helper to return cpu count
name-hash: fix buffer overrun
Clean up fallouts from recent tightening of the set-up sequence,
where Git barfs when repository information is accessed without
first ensuring that it was started in a repository.
* jk/no-looking-at-dotgit-outside-repo:
test-read-cache: setup git dir
has_sha1_file: don't bother if we are not in a repository
The "submodule" specific field in the ref_store structure is
replaced with a more generic "gitdir" that can later be used also
when dealing with ref_store that represents the set of refs visible
from the other worktrees.
* nd/files-backend-git-dir: (28 commits)
refs.h: add a note about sorting order of for_each_ref_*
t1406: new tests for submodule ref store
t1405: some basic tests on main ref store
t/helper: add test-ref-store to test ref-store functions
refs: delete pack_refs() in favor of refs_pack_refs()
files-backend: avoid ref api targeting main ref store
refs: new transaction related ref-store api
refs: add new ref-store api
refs: rename get_ref_store() to get_submodule_ref_store() and make it public
files-backend: replace submodule_allowed check in files_downcast()
refs: move submodule code out of files-backend.c
path.c: move some code out of strbuf_git_path_submodule()
refs.c: make get_main_ref_store() public and use it
refs.c: kill register_ref_store(), add register_submodule_ref_store()
refs.c: flatten get_ref_store() a bit
refs: rename lookup_ref_store() to lookup_submodule_ref_store()
refs.c: introduce get_main_ref_store()
files-backend: remove the use of git_path()
files-backend: add and use files_ref_path()
files-backend: add and use files_reflog_path()
...
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
b1ef400e (setup_git_env: avoid blind fall-back to ".git") made programs
that tried to access a repository without initializing properly die with
a diagnostic message. One offender is test-read-cache, which is used in
p0002. Fix it by calling setup_git_directory() before accessing the
index.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add strcmp_offset() function to also return the offset of the
first change.
Add unit test and helper to verify.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created helper executable to print the value of online_cpus()
allowing multi-threaded tests to be skipped when appropriate.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sha1_array_for_each_unique take a callback using struct object_id.
Since one of these callbacks is an argument to for_each_abbrev, convert
those as well. Rename various functions, replacing "sha1" with "oid".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert this function by changing the declaration and definition and
applying the following semantic patch to update the callers:
@@
expression E1, E2;
@@
- sha1_array_lookup(E1, E2.hash)
+ sha1_array_lookup(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_lookup(E1, E2->hash)
+ sha1_array_lookup(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the callers to pass struct object_id by changing the function
declaration and definition and applying the following semantic patch:
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2.hash)
+ sha1_array_append(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2->hash)
+ sha1_array_append(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name-hash used for detecting paths that are different only in
cases (which matter on case insensitive filesystems) has been
optimized to take advantage of multi-threading when it makes sense.
* jh/memihash-opt:
name-hash: add test-lazy-init-name-hash to .gitignore
name-hash: add perf test for lazy_init_name_hash
name-hash: add test-lazy-init-name-hash
name-hash: perf improvement for lazy_init_name_hash
hashmap: document memihash_cont, hashmap_disallow_rehash api
hashmap: add disallow_rehash setting
hashmap: allow memihash computation to be continued
name-hash: specify initial size for istate.dir_hash table
This helper is very small, so convert the entire thing.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add t/helper/test-lazy-init-name-hash.c test code
to demonstrate performance times for lazy_init_name_hash()
using the original single-threaded and the new multi-threaded
code paths.
Includes a --dump option to dump the created hashmaps to
stdout. You can use this to run both code paths and
confirm that they generate the same hashmaps.
Includes a --analyze option to analyze performance of both
code paths over a range of index sizes to help you find a
lower bound for the LAZY_THREAD_COST in name-hash.c.
For example, passing "-a 4000" will set "istate.cache_nr"
to 4000 and then try the multi-threaded code -- probably
giving 2 threads with 2000 entries each. It will then
run both the single-threaded (1x4000) and the multi-threaded
(2x2000) and compare the times. It will then repeat the
test with 8000, 12000, and etc. so that you can see the
cross over.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, we had no explicit tests of that function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few codepaths had to rely on a global variable when sorting
elements of an array because sort(3) API does not allow extra data
to be passed to the comparison function. Use qsort_s() when
natively available, and a fallback implementation of it when not,
to eliminate the need, which is a prerequisite for making the
codepath reentrant.
* rs/qsort-s:
ref-filter: use QSORT_S in ref_array_sort()
string-list: use QSORT_S in string_list_sort()
perf: add basic sort performance test
add QSORT_S
compat: add qsort_s()
Add a sort command to test-string-list that reads lines from stdin,
stores them in a string_list and then sorts it. Use it in a simple
perf test script to measure the performance of string_list_sort().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of the hold_locked_index() function pass 0 when they want to
prepare to write a new version of the index file without wishing to
die or emit an error message when the request fails (e.g. somebody
else already held the lock), and pass 1 when they want the call to
die upon failure.
This option is called LOCK_DIE_ON_ERROR by the underlying lockfile
API, and the hold_locked_index() function translates the paramter to
LOCK_DIE_ON_ERROR when calling the hold_lock_file_for_update().
Replace these hardcoded '1' with LOCK_DIE_ON_ERROR and stop
translating. Callers other than the ones that are replaced with
this change pass '0' to the function; no behaviour change is
intended with this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
Among the callers of hold_locked_index() that passes 0:
- diff.c::refresh_index_quietly() at the end of "git diff" is an
opportunistic update; it leaks the lockfile structure but it is
just before the program exits and nobody should care.
- builtin/describe.c::cmd_describe(),
builtin/commit.c::cmd_status(),
sequencer.c::read_and_refresh_cache() are all opportunistic
updates and they are OK.
- builtin/update-index.c::cmd_update_index() takes a lock upfront
but we may end up not needing to update the index (i.e. the
entries may be fully up-to-date), in which case we do not need to
issue an error upon failure to acquire the lock. We do diagnose
and die if we indeed need to update, so it is OK.
- wt-status.c::require_clean_work_tree() IS BUGGY. It asks
silence, does not check the returned value. Compare with
callsites like cmd_describe() and cmd_status() to notice that it
is wrong to call update_index_if_able() unconditionally.
These test helper programs access the index, but do not ever
setup_git_directory(), meaning we just blindly looked in
".git/index". This happened to work for the purposes of our
tests (which do not run from subdirectories, nor in
non-repos), but it's a bad habit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call "qsort(array, nelem, sizeof(array[0]), fn)", and most of
the time third parameter is redundant. A new QSORT() macro lets us
omit it.
* rs/qsort:
show-branch: use QSORT
use QSORT, part 2
coccicheck: use --all-includes by default
remove unnecessary check before QSORT
use QSORT
add QSORT
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callbacks for iterating a sha1_array must have a void
return. This is unlike our usual for_each semantics, where
a callback may interrupt iteration and have its value
propagated. Let's switch it to the usual form, which will
enable its use in more places (e.g., where we are replacing
an existing iteration with a different data structure).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
René Scharfe
Jeff King
Stefan Beller
Ville Skyttä
Ævar Arnfjörð Bjarmason
Brandon Williams
Michael Haggerty
brian m. carlson
Johannes Schindelin
Nguyễn Thái Ngọc Duy
Jeff Hostetler
Ramsay Jones