More Perforce row number limit workaround for "git p4".
* ld/p4-changes-block-size:
git-p4: fixing --changes-block-size handling
git-p4: add tests for non-numeric revision range
git-p4: test with limited p4 server results
git-p4: additional testing of --changes-block-size
The --changes-block-size handling was intended to help when
a user has a limited "maxscanrows" (see "p4 group"). It used
"p4 changes -m $maxchanges" to limit the number of results.
Unfortunately, it turns out that the "maxscanrows" and "maxresults"
limits are actually applied *before* the "-m maxchanges" parameter
is considered (experimentally).
Fix the block-size handling so that it gets blocks of changes
limited by revision number ($Start..$Start+$N, etc). This limits
the number of results early enough that both sets of tests pass.
Note that many other Perforce operations can fail for the same
reason (p4 print, p4 files, etc) and it's probably not possible
to workaround this. In the real world, this is probably not
usually a problem.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike "$EDITOR" and "$GIT_EDITOR" that can hold the path to the
command and initial options (e.g. "/path/to/emacs -nw"), 'git p4'
did not let the shell interpolate the contents of the environment
variable that name the editor "$P4EDITOR" (and "$EDITOR", too).
Make it in line with the rest of Git, as well as with Perforce.
* ld/p4-editor-multi-words:
git-p4: tests: use test-chmtime in place of touch
git-p4: fix handling of multi-word P4EDITOR
git-p4: add failing test for P4EDITOR handling
Fixing bug with UTF-16 files when they are retrieved by git-p4. It
was always getting the tip version of the file and the history of
the file was lost.
Signed-off-by: Miguel Torroja <miguel.torroja@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches git-p4 to pass the P4EDITOR variable to the
shell for expansion, so that any command-line arguments are
correctly handled. Without this, git-p4 can only launch the
editor if P4EDITOR is solely the path to the binary, without
any arguments.
This also adjusts t9805, which relied on the previous behaviour.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git p4 attempts to better handle branches in Perforce.
* va/p4-client-path:
git-p4: improve client path detection when branches are used
t9801: check git-p4's branch detection with client spec enabled
"git p4" learned "--changes-block-size <n>" to read the changes in
chunks from Perforce, instead of making one call to "p4 changes"
that may trigger "too many rows scanned" error from Perforce.
* ls/p4-changes-block-size:
git-p4: use -m when running p4 changes
Perforce allows client side file/directory remapping through
the use of the client view definition that is part of the
user's client spec.
To support this functionality while branch detection is
enabled it is important to determine the branch location in
the workspace such that the correct files are patched before
Perforce submission. Perforce provides a command that
facilitates this process: p4 where.
This patch does two things to fix improve file location
detection when git-p4 has branch detection and use of client
spec enabled:
1. Enable usage of "p4 where" when Perforce branches exist
in the git repository, even when client specification is
used. This makes use of the already existing function
p4Where.
2. Allow identifying partial matches of the branch's depot
path while processing the output of "p4 where". For
robustness, paths will only match if ending in "/...".
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simply running "p4 changes" on a large branch can result in a "too
many rows scanned" error from the Perforce server. It is better to
use a sequence of smaller calls to "p4 changes", using the "-m"
option to limit the size of each call.
Signed-off-by: Lex Spoon <lex@lexspoon.org>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a Perforce server is configured to automatically set +l
(exclusive lock) on add of certain file types, git p4 submit will
fail during getP4OpenedType, as the regex doesn't expect the
trailing '*exclusive*' from p4 opened:
//depot/file.png#1 - add default change (binary+l) *exclusive*
Signed-off-by: Blair Holloway <blair_holloway@playstation.sony.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The clone subcommand has long had support for excluding
subdirectories, but sync has not. This is a nuisance,
since as soon as you do a sync, any changed files that
were initially excluded start showing up.
Move the "exclude" command-line option into the parent
class; the actual behavior was already present there so
it simply had to be exposed.
Signed-off-by: Luke Diamand <luke@diamand.org>
Reviewed-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you use git-p4 with the "--prepare-p4-only" option, then
it prints the p4 command line to use. However, the command
line was incorrect: the changelist specification must be
supplied on standard input, not as an argument to p4.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b4073bb3 (git-p4: Do not include diff in spec file when just
preparing p4, 2014-05-24) broke git p4 submit, here is a proper
fix, including proper handling for windows end of lines.
Signed-off-by: Maxime Coste <frrrwww@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff information render the spec file unusable as is by p4,
do not include it when run with --prepare-p4-only so that the
given file can be directly passed to p4.
With --prepare-p4-only, git-p4 already tells the user it can use
p4 submit with the generated spec file. This fails because of the
diff being present in the file. Not including the diff fixes that.
Without --prepare-p4-only, keeping the diff makes sense for a
quick review of the patch before submitting it. And does not cause
problems with p4 as we remove it programmatically.
Signed-off-by: Maxime Coste <frrrwww@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes a regression in 1.9.0 with an obviously correct single-liner.
* cl/p4-use-diff-tree:
git-p4: format-patch to diff-tree change breaks binary patches
When applying binary patches a full index is required. format-patch
already handles this, but diff-tree needs '--full-index' argument
to always output full index. When git-p4 runs git-apply to test
the patch, git-apply rejects the patch due to abbreviated blob
object names. This is the error message git-apply emits in this
case:
error: cannot apply binary patch to '<filename>' without full index line
error: <filename>: patch does not apply
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git p4 rebase' fails with the following message if there is a file
named HEAD in the current directory:
fatal: ambiguous argument 'HEAD': both revision and filename
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
Take the suggestion above and explicitly state that HEAD should be
treated as a revision.
Signed-off-by: Vlad Dogaru <vdogaru@ixiacom.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "p4 where" fails, for whatever reason, the error message tries to
show an undefined variable. This minor bug applies only when using a
client spec, and was introduced recently in 9d57c4a (git p4: implement
view spec wildcards with "p4 where", 2013-08-30).
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9d7d446 (git p4: submit files with wildcards, 2012-04-29)
fixed problems with handling files that had p4 wildcard
characters, like "@" and "*". But it missed one case, that of
RCS keyword scrubbing, which uses "p4 fstat" to extract type
information. Fix it by calling wildcard_encode() on the raw
filename.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generating the submit template for p4 uses tempfile.mkstemp(),
which by default puts files in /tmp. For a test that fails,
possibly on purpose, this is not cleaned up. Run with TMPDIR
pointing into the trash directory so the temp files go away
with the test results.
To do this required some other minor changes. First, the editor
is launched using system(editor + " " + template_file), using
shell expansion to build the command string. This doesn't work
if editor has a space in it. And is generally unwise as it's
easy to fool the shell into doing extra work. Exec the args
directly, without shell expansion.
Second, without shell expansion, the trick of "P4EDITOR=:" used
in the tests doesn't work. Use a real command, true, as the
non-interactive editor for testing.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Damien Gérard highlights an interesting problem. Some p4
repositories end up with symlinks that have an empty target. It
is not possible to create this with current p4, but they do
indeed exist.
The effect in git p4 is that "p4 print" on the symlink returns an
empty string, confusing the curret symlink-handling code.
Such broken repositories cause problems in p4 as well, even with
no git involved. In p4, syncing to a change that includes a
bogus symlink causes errors:
//depot/empty-symlink - updating /home/me/p4/empty-symlink
rename: /home/me/p4/empty-symlink: No such file or directory
and leaves no symlink.
In git, replicate the p4 behavior by ignoring these bad symlinks.
If, in a later p4 revision, the symlink happens to point to
something non-null, the symlink will be replaced properly.
Add a big test for all this too.
This happens to be a regression introduced by 1292df1 (git-p4:
Fix occasional truncation of symlink contents., 2013-08-08) and
appeared first in 1.8.5. But it shows up only in p4 repositories
of dubious character, so can wait for a proper release.
Tested-by: Damien Gérard <damien@iwi.me>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of git format-patch can vary with user preferences. In
particular setting diff.noprefix will break the "git apply" that
is done as part of "git p4 submit".
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Crestez Dan Leonard <cdleonard@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" does not support many of the view wildcards, such as * and
%%n. It only knows the common ... mapping, and exclusions.
Redo the entire wildcard code around the idea of directly querying
the p4 server for the mapping. For each commit, invoke "p4 where"
with committed file paths as args and use the client mapping to
decide where the file goes in git.
This simplifies a lot of code, and adds support for all wildcards
supported by p4. Downside is that there is probably a 20%-ish
slowdown with this approach.
[pw: redo code and tests]
Signed-off-by: Kazuki Saitoh <ksaitoh560@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Symlink contents in p4 print sometimes have a trailing
new line character, but sometimes it doesn't. git-p4
should only remove the last character if that character
is '\n'.
Signed-off-by: Alex Juncu <ajuncu@ixiacom.com>
Signed-off-by: Alex Badea <abadea@ixiacom.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The generic chdir() helper sets the PWD environment
variable, as that is what is used by p4 to know its
current working directory. Normally the shell would
do this, but in git-p4, we must do it by hand.
However, when the path contains a symbolic link,
os.getcwd() will return the physical location. If the
p4 client specification includes symlinks, setting PWD
to the physical location causes p4 to think it is not
inside the client workspace. It complains, e.g.
Path /vol/bar/projects/foo/... is not under client root /p/foo
One workaround is to use AltRoots in the p4 client specification,
but it is cleaner to handle it directly in git-p4.
Other uses of chdir still require setting PWD to an
absolute path so p4 features like P4CONFIG work. See
bf1d68f (git-p4: use absolute directory for PWD env
var, 2011-12-09).
[ pw: tweak patch and commit message ]
Thanks-to: John Keeping <john@keeping.me.uk>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve "git p4" on Cygwin.
* pw/git-p4-on-cygwin: (21 commits)
git p4: introduce gitConfigBool
git p4: avoid shell when calling git config
git p4: avoid shell when invoking git config --get-all
git p4: avoid shell when invoking git rev-list
git p4: avoid shell when mapping users
git p4: disable read-only attribute before deleting
git p4 test: use test_chmod for cygwin
git p4: cygwin p4 client does not mark read-only
git p4 test: avoid wildcard * in windows
git p4 test: use LineEnd unix in windows tests too
git p4 test: newline handling
git p4: scrub crlf for utf16 files on windows
git p4: remove unreachable windows \r\n conversion code
git p4 test: translate windows paths for cygwin
git p4 test: start p4d inside its db dir
git p4 test: use client_view in t9806
git p4 test: avoid loop in client_view
git p4 test: use client_view to build the initial client
git p4: generate better error message for bad depot path
git p4: remove unused imports
...
With small updates to remove dependency on newer features of
Python, keep git-p4 usable with older Python.
* bc/git-p4-for-python-2.4:
INSTALL: git-p4 does not support Python 3
git-p4.py: support Python 2.4
git-p4.py: support Python 2.5
Make the intent of "--bool" more obvious by returning a direct True
or False value. Convert a couple non-bool users with obvious bool
intent.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Invoke git rev-list directly, avoiding the shell, in
P4Submit and P4Sync. The overhead of starting extra
processes is significant in cygwin; this speeds things
up on that platform.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The extra quoting and double-% are unneeded, just to work
around the shell. Instead, avoid the shell indirection.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On windows, p4 marks un-edited files as read-only. Not only are
they read-only, but also they cannot be deleted. Remove the
read-only attribute before deleting in both the copy and rename
cases.
This also happens in the RCS cleanup code, where a file is marked
to be deleted, but must first be edited to remove adjust the
keyword lines. Make sure it is editable before patching.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Files of type utf16 are handled with "p4 print" instead of the
normal "p4 -G print" interface due to how the latter does not
produce correct output. See 55aa571 (git-p4: handle utf16
filetype properly, 2011-09-17) for details.
On windows, though, "p4 print" can not be told which line
endings to use, as there is no underlying client, and always
chooses crlf, even for utf16 files. Convert the \r\n into \n
when importing utf16 files.
The fix for this is complex, in that the problem is a property
of the NT version of p4. There are old versions of p4 that
were compiled directly for cygwin that should not be subjected
to text replacement. The right check here, then, is to look
at the p4 version, not the OS version. Note also that on cygwin,
platform.system() is "CYGWIN_NT-5.1" or similar, not "Windows".
Add a function to memoize the p4 version string and use it to
check for "/NT", indicating the Windows build of p4.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replacing \r\n with \n on windows was added in c1f9197 (Replace
\r\n with \n when importing from p4 on Windows, 2007-05-24), to
work around an oddity with "p4 print" on windows. Text files
are printed with "\r\r\n" endings, regardless of whether they
were created on unix or windows, and regardless of the client
LineEnd setting.
As of d2c6dd3 (use p4CmdList() to get file contents in Python
dicts. This is more robust., 2007-05-23), git-p4 uses "p4 -G
print", which generates files in a raw format. As the native
line ending format if p4 is \n, there will be no \r\n in the
raw text.
Actually, it is possible to generate a text file so that the
p4 representation includes embedded \r\n, even though this is not
normal on either windows or unix. In that case the code would
have mistakenly stripped them out, but now they will be left
intact.
More information on how p4 deals with line endings is here:
http://kb.perforce.com/article/63
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depot paths must start with //. Exit with a better explanation
when a bad depot path is supplied.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Found by "pyflakes" checker tool.
Modules shelve, getopt were unused.
Module os.path is exported by os.
Reformat one-per-line as is PEP008 suggested style.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit fed2369 (git-p4: Search for parent commit on branch creation,
2012-01-25) uses temporary branches to help find the parent of a
new p4 branch. The temp branches are of the form "git-p4-tmp/%d"
for some p4 change number. Mistakenly, this string was made
using os.path.join() instead of just string concatenation. On
windows, this turns into a backslash (\), which is not allowed in
git branch names.
Reported-by: Casey McGinty <casey.mcginty@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Python 2.4 lacks the following features:
subprocess.check_call
struct.pack_into
Take a cue from 460d1026 and provide an implementation of the
CalledProcessError exception. Then replace the calls to
subproccess.check_call with calls to subprocess.call that check the return
status and raise a CalledProcessError exception if necessary.
The struct.pack_into in t/9802 can be converted into a single struct.pack
call which is available in Python 2.4.
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Python 2.5 and older do not accept None as the first argument to
translate() and complain with:
TypeError: expected a character buffer object
As suggested by Pete Wyckoff, let's just replace the call to translate()
with a regex search which should be more clear and more portable.
This allows git-p4 to be used with Python 2.5.
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It finds its upstream and applies the commit properly, but
the sync step will fail unless it is told which branch to
work on.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is legal to sync a branch with a different name than
refs/remotes/p4/master, and to do so even when master does
not exist.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Luke Diamand
Miguel Torroja
Vitor Antunes
Lex Spoon
Blair Holloway
Maxime Coste
Tolga Ceylan
Vlad Dogaru
Pete Wyckoff
Crestez Dan Leonard
Kazuki Saitoh
Alexandru Juncu
Ondřej Bílka
Veres Lajos
Miklós Fazekas
Brandon Casey