Граф коммитов

10 Коммитов

Автор SHA1 Сообщение Дата
Jeff King 28a4e58021 diff: always try to set up the repository
If we see an explicit "--no-index", we do not bother calling
setup_git_directory_gently() at all. This means that we may
miss out on reading repo-specific config.

It's arguable whether this is correct or not. If we were
designing from scratch, making "git diff --no-index"
completely ignore the repository makes some sense. But we
are nowhere near scratch, so let's look at the existing
behavior:

  1. If you're in the top-level of a repository and run an
     explicit "diff --no-index", the config subsystem falls
     back to reading ".git/config", and we will respect repo
     config.

  2. If you're in a subdirectory of a repository, then we
     still try to read ".git/config", but it generally
     doesn't exist. So "diff --no-index" there does not
     respect repo config.

  3. If you have $GIT_DIR set in the environment, we read
     and respect $GIT_DIR/config,

  4. If you run "git diff /tmp/foo /tmp/bar" to get an
     implicit no-index, we _do_ run the repository setup,
     and set $GIT_DIR (or respect an existing $GIT_DIR
     variable). We find the repo config no matter where we
     started, and respect it.

So we already respect the repository config in a number of
common cases, and case (2) is the only one that does not.
And at least one of our tests, t4034, depends on case (1)
behaving as it does now (though it is just incidental, not
an explicit test for this behavior).

So let's bring case (2) in line with the others by always
running the repository setup, even with an explicit
"--no-index". We shouldn't need to change anything else, as the
implicit case already handles the prefix.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-13 15:45:45 -07:00
Jeff King 7d8930d903 diff: handle --no-index prefixes consistently
If we see an explicit "git diff --no-index ../foo ../bar",
then we do not set up the git repository at all (we already
know we are in --no-index mode, so do not have to check "are
we in a repository?"), and hence have no "prefix" within the
repository. A patch generated by this command will have the
filenames "a/../foo" and "b/../bar", no matter which
directory we are in with respect to any repository.

However, in the implicit case, where we notice that the
files are outside the repository, we will have chdir()'d to
the top-level of the repository. We then feed the prefix
back to the diff machinery. As a result, running the same
diff from a subdirectory will result in paths that look like
"a/subdir/../../foo".

Besides being unnecessarily long, this may also be confusing
to the user: they don't care about the subdir or the
repository at all; it's just where they happened to be when
running the command. We should treat this the same as the
explicit --no-index case.

One way to address this would be to chdir() back to the
original path before running our diff. However, that's a bit
hacky, as we would also need to adjust $GIT_DIR, which could
be a relative path from our top-level.

Instead, we can reuse the diff machinery's RELATIVE_NAME
option, which automatically strips off the prefix. Note that
this _also_ restricts the diff to this relative prefix, but
that's OK for our purposes: we queue our own diff pairs
manually, and do not rely on that part of the diff code.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-13 15:45:45 -07:00
Junio C Hamano 03761c922b Merge branch 'jc/diff-no-index-d-f'
The usual "git diff" when seeing a file turning into a directory
showed a patchset to remove the file and create all files in the
directory, but "git diff --no-index" simply refused to work.  Also,
when asked to compare a file and a directory, imitate POSIX "diff"
and compare the file with the file with the same name in the
directory, instead of refusing to run.

* jc/diff-no-index-d-f:
  diff-no-index: align D/F handling with that of normal Git
  diff-no-index: DWIM "diff D F" into "diff D/F F"
2015-05-05 21:00:24 -07:00
Junio C Hamano 0615173998 diff-no-index: align D/F handling with that of normal Git
When a commit changes a path P that used to be a file to a directory
and creates a new path P/X in it, "git show" would say that file P
was removed and file P/X was created for such a commit.

However, if we compare two directories, D1 and D2, where D1 has a
file D1/P in it and D2 has a directory D2/P under which there is a
file D2/P/X, and ask "git diff --no-index D1 D2" to show their
differences, we simply get a refusal "file/directory conflict".

Surely, that may be what GNU diff does, but we can do better and it
is easy to do so.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-26 14:08:43 -07:00
Junio C Hamano c9e1f2c7f2 diff-no-index: DWIM "diff D F" into "diff D/F F"
"git diff --no-index" was supposed to be a poor-man's approach to
allow using Git diff goodies outside of a Git repository, without
having to patch mainstream diff implementations.

Unlike a POSIX diff that treats "diff D F" (or "diff F D") as a
request to compare D/F and F (or F and D/F) when D is a directory
and F is a file, however, we did not accept such a command line and
instead barfed with "file/directory conflict".

Imitate what POSIX diff does and append the basename of the file
after the name of the directory before comparing.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-25 22:39:07 -07:00
Jeff King c21fc9d0ab t: use test_expect_code instead of hand-rolled comparison
This makes our output in the event of a failure slightly
nicer, and it means that we do not break the &&-chain.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20 10:20:16 -07:00
Thomas Gummerer 8a19dfa1aa diff: add test for --no-index executed outside repo
470faf9 diff: move no-index detection to builtin/diff.c breaks the error
message for "git diff --no-index", when the command is executed outside
of a git repository and the wrong number of arguments are given. 6df5762
diff: don't read index when --no-index is given fixes the problem.

Add a test to guard against similar breakages in the future.

Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-16 13:12:33 -08:00
Thomas Gummerer 6df5762db3 diff: don't read index when --no-index is given
git diff --no-index ... currently reads the index, during setup, when
calling gitmodules_config().  This results in worse performance when the
index is not actually needed.  This patch avoids calling
gitmodules_config() when the --no-index option is given.  The times for
executing "git diff --no-index" in the WebKit repository are improved as
follows:

Test                      HEAD~3            HEAD
------------------------------------------------------------------
4001.1: diff --no-index   0.24(0.15+0.09)   0.01(0.00+0.00) -95.8%

An additional improvement of this patch is that "git diff --no-index" no
longer breaks when the index file is corrupt, which makes it possible to
use it for investigating the broken repository.

To improve the possible usage as investigation tool for broken
repositories, setup_git_directory_gently() is also not called when the
--no-index option is given.

Also add a test to guard against future breakages, and a performance
test to show the improvements.

Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-12 12:23:02 -08:00
Jeff King 546e0fd9e9 diff: handle relative paths in no-index
When diff-no-index is given a relative path to a file outside the
repository, it aborts with error. However, if the file is given
using an absolute path, the diff runs as expected. The two cases
should be treated the same.

Tests and commit message by Tim Henigan.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-22 10:20:18 -07:00
Bobby Powers f3999e0327 diff --no-index: reset temporary buffer lengths on directory iteration
Commit 875b91b (diff --no-index: use strbuf for temporary pathnames,
2012-04-25) introduced a regression when using diff --no-index with
directories.  When iterating through a directory, the switch to strbuf
from heap-allocated char arrays caused paths to form like 'dir/file1',
'dir/file1file2', rather than 'dir/file1', 'dir/file2' as expected.

Avoid this by resetting the paths variables to their original length
before each iteration.

Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
Reviewed-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-16 11:17:45 -07:00