git/po
Ævar Arnfjörð Bjarmason 5e9637c629 i18n: add infrastructure for translating Git with gettext
Change the skeleton implementation of i18n in Git to one that can show
localized strings to users for our C, Shell and Perl programs using
either GNU libintl or the Solaris gettext implementation.

This new internationalization support is enabled by default. If
gettext isn't available, or if Git is compiled with
NO_GETTEXT=YesPlease, Git falls back on its current behavior of
showing interface messages in English. When using the autoconf script
we'll auto-detect if the gettext libraries are installed and act
appropriately.

This change is somewhat large because as well as adding a C, Shell and
Perl i18n interface we're adding a lot of tests for them, and for
those tests to work we need a skeleton PO file to actually test
translations. A minimal Icelandic translation is included for this
purpose. Icelandic includes multi-byte characters which makes it easy
to test various edge cases, and it's a language I happen to
understand.

The rest of the commit message goes into detail about various
sub-parts of this commit.

= Installation

Gettext .mo files will be installed and looked for in the standard
$(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to
override that, but that's only intended to be used to test Git itself.

= Perl

Perl code that's to be localized should use the new Git::I18n
module. It imports a __ function into the caller's package by default.

Instead of using the high level Locale::TextDomain interface I've
opted to use the low-level (equivalent to the C interface)
Locale::Messages module, which Locale::TextDomain itself uses.

Locale::TextDomain does a lot of redundant work we don't need, and
some of it would potentially introduce bugs. It tries to set the
$TEXTDOMAIN based on package of the caller, and has its own
hardcoded paths where it'll search for messages.

I found it easier just to completely avoid it rather than try to
circumvent its behavior. In any case, this is an issue wholly
internal Git::I18N. Its guts can be changed later if that's deemed
necessary.

See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for
a further elaboration on this topic.

= Shell

Shell code that's to be localized should use the git-sh-i18n
library. It's basically just a wrapper for the system's gettext.sh.

If gettext.sh isn't available we'll fall back on gettext(1) if it's
available. The latter is available without the former on Solaris,
which has its own non-GNU gettext implementation. We also need to
emulate eval_gettext() there.

If neither are present we'll use a dumb printf(1) fall-through
wrapper.

= About libcharset.h and langinfo.h

We use libcharset to query the character set of the current locale if
it's available. I.e. we'll use it instead of nl_langinfo if
HAVE_LIBCHARSET_H is set.

The GNU gettext manual recommends using langinfo.h's
nl_langinfo(CODESET) to acquire the current character set, but on
systems that have libcharset.h's locale_charset() using the latter is
either saner, or the only option on those systems.

GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either,
but MinGW and some others need to use libcharset.h's locale_charset()
instead.

=Credits

This patch is based on work by Jeff Epler <jepler@unpythonic.net> who
did the initial Makefile / C work, and a lot of comments from the Git
mailing list, including Jonathan Nieder, Jakub Narebski, Johannes
Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and
others.

[jc: squashed a small Makefile fix from Ramsay]

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-05 20:46:55 -08:00
..
.gitignore i18n: add infrastructure for translating Git with gettext 2011-12-05 20:46:55 -08:00
README i18n: add infrastructure for translating Git with gettext 2011-12-05 20:46:55 -08:00
is.po i18n: add infrastructure for translating Git with gettext 2011-12-05 20:46:55 -08:00

README

Core GIT Translations
=====================

This directory holds the translations for the core of Git. This
document describes how to add to and maintain these translations, and
how to mark source strings for translation.


Generating a .pot file
----------------------

The po/git.pot file contains a message catalog extracted from Git's
sources. You need to generate it to add new translations with
msginit(1), or update existing ones with msgmerge(1).

Since the file can be automatically generated it's not checked into
git.git. To generate it do, at the top-level:

    make pot


Initializing a .po file
-----------------------

To add a new translation first generate git.pot (see above) and then
in the po/ directory do:

    msginit --locale=XX

Where XX is your locale, e.g. "is", "de" or "pt_BR".

Then edit the automatically generated copyright info in your new XX.po
to be correct, e.g. for Icelandic:

    @@ -1,6 +1,6 @@
    -# Icelandic translations for PACKAGE package.
    -# Copyright (C) 2010 THE PACKAGE'S COPYRIGHT HOLDER
    -# This file is distributed under the same license as the PACKAGE package.
    +# Icelandic translations for Git.
    +# Copyright (C) 2010 Ævar Arnfjörð Bjarmason <avarab@gmail.com>
    +# This file is distributed under the same license as the Git package.
     # Ævar Arnfjörð Bjarmason <avarab@gmail.com>, 2010.

And change references to PACKAGE VERSION in the PO Header Entry to
just "Git":

    perl -pi -e 's/(?<="Project-Id-Version: )PACKAGE VERSION/Git/' XX.po


Updating a .po file
-------------------

If there's an existing *.po file for your language but you need to
update the translation you first need to generate git.pot (see above)
and then in the po/ directory do:

    msgmerge --add-location --backup=off -U XX.po git.pot

Where XX.po is the file you want to update.

Testing your changes
--------------------

Before you submit your changes go back to the top-level and do:

    make

On systems with GNU gettext (i.e. not Solaris) this will compile your
changed PO file with `msgfmt --check`, the --check option flags many
common errors, e.g. missing printf format strings, or translated
messages that deviate from the originals in whether they begin/end
with a newline or not.


Marking strings for translation
-------------------------------

Before strings can be translated they first have to be marked for
translation.

Git uses an internationalization interface that wraps the system's
gettext library, so most of the advice in your gettext documentation
(on GNU systems `info gettext` in a terminal) applies.

General advice:

 - Don't mark everything for translation, only strings which will be
   read by humans (the porcelain interface) should be translated.

   The output from Git's plumbing utilities will primarily be read by
   programs and would break scripts under non-C locales if it was
   translated. Plumbing strings should not be translated, since
   they're part of Git's API.

 - Adjust the strings so that they're easy to translate. Most of the
   advice in `info '(gettext)Preparing Strings'` applies here.

 - If something is unclear or ambiguous you can use a "TRANSLATORS"
   comment to tell the translators what to make of it. These will be
   extracted by xgettext(1) and put in the po/*.po files, e.g. from
   git-am.sh:

       # TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a]
       # in your translation. The program will only accept English
       # input at this point.
       gettext "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all "

   Or in C, from builtin/revert.c:

       /* TRANSLATORS: %s will be "revert" or "cherry-pick" */
       die(_("%s: Unable to write new index file"), action_name(opts));

We provide wrappers for C, Shell and Perl programs. Here's how they're
used:

C:

 - Include builtin.h at the top, it'll pull in in gettext.h, which
   defines the gettext interface. Consult with the list if you need to
   use gettext.h directly.

 - The C interface is a subset of the normal GNU gettext
   interface. We currently export these functions:

   - _()

    Mark and translate a string. E.g.:

        printf(_("HEAD is now at %s"), hex);

   - Q_()

    Mark and translate a plural string. E.g.:

        printf(Q_("%d commit", "%d commits", number_of_commits));

    This is just a wrapper for the ngettext() function.

   - N_()

    A no-op pass-through macro for marking strings inside static
    initializations, e.g.:

        static const char *reset_type_names[] = {
            N_("mixed"), N_("soft"), N_("hard"), N_("merge"), N_("keep"), NULL
        };

    And then, later:

        die(_("%s reset is not allowed in a bare repository"),
               _(reset_type_names[reset_type]));

    Here _() couldn't have statically determined what the translation
    string will be, but since it was already marked for translation
    with N_() the look-up in the message catalog will succeed.

Shell:

 - The Git gettext shell interface is just a wrapper for
   gettext.sh. Import it right after git-sh-setup like this:

       . git-sh-setup
       . git-sh-i18n

   And then use the gettext or eval_gettext functions:

       # For constant interface messages:
       gettext "A message for the user"; echo

       # To interpolate variables:
       details="oh noes"
       eval_gettext "An error occured: \$details"; echo

   In addition we have wrappers for messages that end with a trailing
   newline. I.e. you could write the above as:

       # For constant interface messages:
       gettextln "A message for the user"

       # To interpolate variables:
       details="oh noes"
       eval_gettextln "An error occured: \$details"

   More documentation about the interface is available in the GNU info
   page: `info '(gettext)sh'`. Looking at git-am.sh (the first shell
   command to be translated) for examples is also useful:

       git log --reverse -p --grep=i18n git-am.sh

Perl:

 - The Git::I18N module provides a limited subset of the
   Locale::Messages functionality, e.g.:

       use Git::I18N;
       print __("Welcome to Git!\n");
       printf __("The following error occured: %s\n"), $error;

   Run `perldoc perl/Git/I18N.pm` for more info.


Testing marked strings
----------------------

Even if you've correctly marked porcelain strings for translation
something in the test suite might still depend on the US English
version of the strings, e.g. to grep some error message or other
output.

To smoke out issues like these Git can be compiled with gettext poison
support, at the top-level:

    make GETTEXT_POISON=YesPlease

That'll give you a git which emits gibberish on every call to
gettext. It's obviously not meant to be installed, but you should run
the test suite with it:

    cd t && prove -j 9 ./t[0-9]*.sh

If tests break with it you should inspect them manually and see if
what you're translating is sane, i.e. that you're not translating
plumbing output.

If not you should replace calls to grep with test_i18ngrep, or
test_cmp calls with test_i18ncmp. If that's not enough you can skip
the whole test by making it depend on the C_LOCALE_OUTPUT
prerequisite. See existing test files with this prerequisite for
examples.